aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/tvp5150.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-17media: mc-entity: Rename media_entity_remote_pad() to media_pad_remote_pad_first()Laurent Pinchart1-1/+1
The media_entity_remote_pad() is misnamed, as it operates on a pad and not an entity. Rename it to media_pad_remote_pad_first() to clarify its behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-17media: v4l2-mediabus: Use structures to describe bus configurationLaurent Pinchart1-2/+4
The media bus configuration is specified through a set of flags, some of which being mutually exclusive. This doesn't scale to express more complex configurations. Improve the API by replacing the single flags field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures. The flags themselves are still used in those structures, so they are kept here. Drivers are however updated to use structure fields instead of flags when already possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-07-12media: i2c: tvp5150: deleted the repeated wordlijian1-1/+1
deleted the repeated word 'the' in the comments. Signed-off-by: lijian <lijian@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-10/+10
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19media: i2c: tvp5150: use pm_runtime_resume_and_get()Mauro Carvalho Chehab1-13/+3
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: tvp5150: Fix wrong return value of tvp5150_parse_dt()Zhang Xiaoxu1-0/+1
If of_graph_get_endpoint_by_regs() return NULL, it will return 0 rather than an errno, because we doesn't initialize the return value. Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: i2c: tvp5150: simplify getting state containerKrzysztof Kozlowski1-4/+2
The pointer to 'struct v4l2_subdev' is stored in drvdata via v4l2_i2c_subdev_init() so there is no point of a dance like: struct i2c_client *client = to_i2c_client(struct device *dev) struct v4l2_subdev *sd = i2c_get_clientdata(client); This allows to remove local variable 'client' and few pointer dereferences. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-29media: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: i2c: Use the new get_mbus_config pad opJacopo Mondi1-3/+4
Move the existing users of the g_mbus_config video operation to use the newly introduced get_mbus_config pad operations. All the ported drivers report a static media bus configuration and do no support s_mbus_config so the operation implementation has not changed. Bridge drivers needs to call the new pad operation and will receive an -ENOICTLCMD when calling the old g_mbus_config video operation Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: tvp5150: Add missed media_entity_cleanup()Chuhong Yuan1-2/+6
This driver does not call media_entity_cleanup() in the error handler of tvp5150_registered() and tvp5150_remove(), while it has called media_entity_pads_init() at first. Add the missed calls to fix it. Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: make debug output more readableMarco Felsch1-3/+6
The debug output for tvp5150_selmux() isn't really intuitive. Register values are printed decimal formatted and the input/output driver states are printed as enum. Even more the "normal" output enum mapps to zero so a active output will printing output=0 and a inactive output=1. Change this by brinting the register values hex formatted and the states as more readable string. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add support to limit sdtv standardsMarco Felsch1-2/+74
The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video data and is able to auto-detect the input signal. The auto-detection does not work if the connector does not receive an input signal and the tvp5150 might not be configured correctly. This misconfiguration leads into wrong decoded video streams if the tvp5150 gets powered on before the video signal is present. Limit the supported sdtv standards according to the actual selected connector to avoid a misconfiguration. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add subdev open/close callbacksMarco Felsch1-0/+22
Bring the device into a working state upon a open/close call. Currently this involves only the interrupt enable/disable process but can be extended in the future. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add v4l2-event supportMarco Felsch1-1/+17
Currently the driver notifies internal subdevs if the signal is locked or not. This information is also useful for userpace applications e.g. to switch to another input device upon a signal lost event. This commit adds the support for the userspace to subscribe to the V4L2_EVENT_SOURCE_CHANGE and V4L2_EVENT_CTRL events. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: move irq en-/disable into runtime-pm opsMarco Felsch1-6/+55
As documented in [1] the runtime-pm ops are used to set the device into a fully 'workable' state. Therefore it can be used to enable or disable the irqs. [1] https://www.kernel.org/doc/html/latest/power/runtime_pm.html Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: initialize subdev before parsing device treeMichael Tretter1-4/+3
There are several debug prints in the tvp5150_parse_dt() function, which do not print the prefix, because the v4l2_subdev is not initialized, yet. Initialize the v4l2_subdev before parsing the device tree to fix the debug messages. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add FORMAT_TRY support for get/set selection handlersMarco Felsch1-32/+81
Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is no way to try different selections. The patch adds a helper function to select the correct selection memory space (sub-device file handle or driver state) which will be set/returned. The selection rectangle is updated if the format is FORMAT_ACTIVE and the rectangle position and/or size differs from the current set rectangle. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: fix set_selection rectangle handlingMarco Felsch1-16/+16
Currently a local copy of sel->r is made and adapted to the hardware constraints. After the adaption the value is applied to the hardware but the driver forgot to reflect the adapted value to the user space. Drop the local copy and work directly on the requested rectangle instead to fix this. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add input source selection of_graph supportMarco Felsch1-27/+404
This patch adds the of_graph support to describe the tvp input connections. Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result of discussion [1],[2] the device-tree maps these ports 1:1. Look at the Documentation for more information. Since the TVP5150 is a converter/bridge the device-tree must contain at least 1-input and 1-output port. The mc-connectors and mc-links are only created if the device-tree contains the corresponding connector nodes. If more than one connector is available the media_entity_operations.link_setup() callback ensures that only one connector is active. [1] https://www.spinics.net/lists/linux-media/msg138545.html [2] https://www.spinics.net/lists/linux-media/msg138546.html Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: partial revert of "[media] tvp5150: add HW input connectors support"Javier Martinez Canillas1-145/+0
Commit f7b4b54e6364 ("[media] tvp5150: add HW input connectors support") added input signals support for the tvp5150, but the approach was found to be incorrect so the corresponding DT binding commit 82c2ffeb217a ("[media] tvp5150: document input connectors DT bindings") was reverted. This left the driver with an undocumented (and wrong) DT parsing logic, so lets get rid of this code as well until the input connectors support is implemented properly. It's a partial revert due other patches added on top of mentioned commit not allowing the commit to be reverted cleanly anymore. But all the code related to the DT parsing logic and input entities creation are removed. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [m.felsch@pengutronix.de: rm TVP5150_INPUT_NUM define] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-08-13media: i2c: Convert to new i2c device probe()Kieran Bingham1-3/+2
The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-13media: i2c: tvp5150: Add of_node_put() before gotoNishka Dasgupta1-0/+4
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in four places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: tvp5150: fix irq_request error path during probeMarco Felsch1-1/+1
Commit 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") introduced the interrupt handling. But we have to free the v4l2_ctrl_handler before we can return the error code. Fixes: 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zeroSakari Ailus1-1/+1
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-03media: v4l: Remove support for crop default target in subdev driversSakari Ailus1-1/+0
The V4L2 sub-device API does not support the crop default target. A number of drivers apparently still did support this, likely as it was needed by the SoC camera framework. Drop support for the default crop rectaingle in sub-device drivers, and use the bounds rectangle in SoC camera instead. Reported-by: Helmut Grohne <h.grohne@intenta.de> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: get rid of some warningsMauro Carvalho Chehab1-3/+1
The recent tvp5150 patchset added two new warnings: drivers/media/i2c/tvp5150.c: In function 'tvp5150_querystd': drivers/media/i2c/tvp5150.c:829:18: warning: unused variable 'decoder' [-Wunused-variable] struct tvp5150 *decoder = to_tvp5150(sd); ^~~~~~~ drivers/media/i2c/tvp5150.c:1522:6: warning: no previous prototype for 'tvp5150_volatile_reg' [-Wmissing-prototypes] bool tvp5150_volatile_reg(struct device *dev, unsigned int reg) ^~~~~~~~~~~~~~~~~~~~ Get rid of them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: implement decoder lock when irq is not usedMauro Carvalho Chehab1-4/+19
When irq is used, the lock is set via IRQ code. When it isn't, the driver just assumes it is always locked. Instead, read the lock status from the status register. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: add querystdPhilipp Zabel1-0/+10
Add the querystd video_op and make it return V4L2_STD_UNKNOWN while the TVP5150 is not locked to a signal. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: add g_std callbackMarco Felsch1-0/+10
Add callback to retrieve the current set norm. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: add sync lock/loss signal debug messagesPhilipp Zabel1-0/+3
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: issue source change eventsPhilipp Zabel1-1/+7
Issue a V4L2_EVENT_SOURCE_CHANGE notification when the TVP5150 locks onto a signal and when it loses the lock. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: partly mainline part port] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: disable output while signal not lockedPhilipp Zabel1-11/+28
To avoid short frames on stream start, keep output pins at high impedance while we are not properly locked onto the input signal. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: Add sync lock interrupt handlingPhilipp Zabel1-3/+60
This patch adds an optional interrupt handler to handle the sync lock interrupt and sync lock status. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [m.felsch@pengutronix.de: move added .g_std callback to separate patch] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: remove pin configuration from initialization tablesPhilipp Zabel1-3/+5
To allow optional interrupt support, we want to configure the pin settings dynamically. Move those register accesses out of the static initialization tables. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: drop init_default register remove] [m.felsch@pengutronix.de: fix regmap access during reset()] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: split reset/enable routinePhilipp Zabel1-4/+13
To trigger standard autodetection only the reset part of the routine is necessary during probe(). Split this out to make it callable on its own. [m.felsch@pengutronix.de: adapt commit message] [m.felsch@pengutronix.de: add tvp5150_enable() to tvp5150_s_stream()] [m.chehab@samsung.com: fix a compilation breakage] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: fix standard autodetectionPhilipp Zabel1-25/+31
Make sure to not overwrite decoder->norm when setting the standard in hardware, but only when instructed by V4L2 API calls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: trigger autodetection on subdev open to reset croppingPhilipp Zabel1-0/+24
If cropping isn't set explicitly by userspace, reset it to the maximum possible rectangle in subdevice open if a standard change is detected. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: move code from internal_ops.open() to pad_ops.init_cfg()] [m.felsch@pengutronix.de: make use of tvp5150_set_default() helper] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: add default format helperMarco Felsch1-17/+25
The patch adds three macros to bundle the mbus_framefmt default values and a helper function to set the the default crop and mbus_framefmt values. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: make use of regmap_update_bitsMarco Felsch1-21/+13
Since commit 9a4c7e68f7e0 ("media: tvp5150: convert register access to regmap")' the driver supports regmap. Now we can drop the handmade bit update sequence and move to the regmap provided helpers. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: convert register access to regmapPhilipp Zabel1-69/+142
Regmap provides built in debugging, caching and provides dedicated accessors for bit manipulations in registers, which make the following changes a lot simpler. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: fix switch exit in set control handlerMarco Felsch1-1/+1
The function only consists of a single switch case block without a default case. Unsupported control requests are indicated by the -EINVAL return code trough the last return statement at the end of the function. So exiting just the switch case block returns the -EINVAL error code but the hue control is supported and a zero should be returned instead. Replace the break by a 'return 0' to fix this behaviour. Fixes: d183e4efcae8 ("[media] v4l: tvp5150: Add missing break in set control handler") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: fix width alignment during set_selection()Marco Felsch1-5/+9
The driver ignored the width alignment which exists due to the UYVY colorspace format. Fix the width alignment and make use of the the provided v4l2 helper function to set the width, height and all alignments in one. Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: declare its own padsMauro Carvalho Chehab1-8/+14
As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: v4l2: taint pads with the signal types for consumer devicesMauro Carvalho Chehab1-0/+2
Consumer devices are provided with a wide different range of types supported by the same driver, allowing different configutations. In order to make easier to setup media controller links, "taint" pads with the signal type it carries. While here, get rid of DEMOD_PAD_VBI_OUT, as the signal it carries is actually the same as the normal video output. The difference happens at the video/VBI interface: - for VBI, only the hidden lines are streamed; - for video, the stream is usually cropped to hide the vbi lines. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: v4l2: remove VBI output padMauro Carvalho Chehab1-1/+0
The signal there is the same as the video output (well, except for sliced VBI, but let's simplify the model and ignore it, at least for now - as it is routed together with raw VBI). Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17media: tvp5150: avoid going past array on v4l2_querymenu()Mauro Carvalho Chehab1-1/+1
The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f66140 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: Convert to using %pOFn instead of device_node.nameRob Herring1-4/+4
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Cc: Benoit Parrot <bparrot@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: Revert "[media] tvp5150: fix pad format frame height"Javier Martinez Canillas1-1/+1
This reverts commit 0866df8dffd514185bfab0d205db76e4c02cf1e4. The v4l uAPI documentation [0] makes clear that in the case of interlaced video (i.e: field is V4L2_FIELD_ALTERNATE) the height refers to the number of lines in the field and not the number of lines in the full frame (which is twice the field height for interlaced formats). So the original height calculation was correct, and it shouldn't had been changed by the mentioned commit. [0]:https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/subdev-formats.html Fixes: 0866df8dffd5 ("[media] tvp5150: fix pad format frame height") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-10Merge tag 'v4.17-rc4' into patchworkMauro Carvalho Chehab1-1/+1
Linux 4.17-rc4 * tag 'v4.17-rc4': (920 commits) Linux 4.17-rc4 KVM: x86: remove APIC Timer periodic/oneshot spikes genksyms: fix typo in parse.tab.{c,h} generation rules kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) gcc-plugins: fix build condition of SANCOV plugin MAINTAINERS: Update Kbuild entry with a few paths Revert "usb: host: ehci: Use dma_pool_zalloc()" platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments MAINTAINERS & files: Canonize the e-mails I use at files media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR tools: power/acpi, revert to LD = gcc bdi: Fix oops in wb_workfn() RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.