| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* fixes:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
|
|
Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource
from DT core") removed support for calling platform_get_resource(...,
IORESOURCE_IRQ, ...) on DT-based drivers, but the probe() function of
mtk-vcodec's encoder was still making use of it. This caused the encoder
driver to fail probe.
Since the platform_get_resource() call was only being used to check for
the presence of the interrupt (its returned resource wasn't even used)
and platform_get_irq() was already being used to get the IRQ, simply
drop the use of platform_get_resource(IORESOURCE_IRQ) and handle the
failure of platform_get_irq(), to get the driver probing again.
[hverkuil: drop unused struct resource *res]
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
mdp_comp_clock_on will increase runtime PM usage counter,
and mdp_comp_clock_off will decrease the runtime PM usage counter.
so, if mdp_comp_clock_on failed after increment runtime PM usage
counter, it should decrease it before return a error code.
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
And if failed to enable clk, add pm_runtime_put() to decrease the
runtime PM usage counter.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Return a negative error code if mdp_vpu_shared_mem_alloc() fails.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix two errors reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:292
mdp_probe() error: we previously assumed 'mdp' could be null
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:460
mdp_cmdq_send() error: we previously assumed 'cmd' could be null
Also, avoid warnings reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:872
mdp_comp_create() warn: passing devm_ allocated variable to kfree. 'comp'
[hverkuil: fix devm_kfree call]
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3).
It provides the following functions:
color transform, format conversion, resize, crop, rotate, flip
and additional image quality enhancement.
The MDP3 driver is mainly used for Google Chromebook products to
import the new architecture to set the HW settings as shown below:
User -> V4L2 framework
-> MDP3 driver -> SCP (setting calculations)
-> MDP3 driver -> CMDQ (GCE driver) -> HW
Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_" prefix
GCE related API, operation control sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c
[hverkuil: add 'depends on REMOTEPROC']
Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported
by the mediatek driver. The other bitrates must be skipped in
QUERY_MENU.
Fixes: d8e8aa866ed8 ("media: mediatek: vcodec: Report supported bitrate modes")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Getting mt8188's chip name according to encoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec.
2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to
initialize private data.
3: Getting mt8188's chip name according to decoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is only one device mutex to lock vb2_queue when running
multi-instance encoding, it can be set by each encoder context.
[hverkuil: fix q_mutex documentation in the header]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Usually, the real bitstream width and height will set to driver
by vidioc_s_fmt, and vidioc_try_fmt() does align to get the
buffer width and height, driver calculate the encoded bitstream
crop information through them. The aligned resolution will be set
as real resolution now if user didn't set crop info by
V4L2_SEL_TGT_CROP, and the encoded bitstream may exist green line
because of crop information error.
Fixs: 'b6c57d313f5f8 ("media: mtk-vcodec: venc: remove redundant code")'
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The "platform_get_resource(pdev, IORESOURCE_IRQ, 0)" is no longer
used after commit a1a2b7125e107("of/platform: Drop static setup of
IRQ resource from DT core"), so just remove the function in
encoder driver to avoid driver probe failed.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add mt8188's compatible "mediatek,mt8188-vcodec-enc".
Add mt8188's device private data "mt8188_pdata".
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Encoder driver got iova from IOMMU is 34-bit, for example:
Here is the sample code:
encoder input frame buffer dma address is:
frm_buf =
vb2_dma_contig_plane_dma_addr(&vb2_v4l2_buffer->vb2_buf, 0);
the value of frm_buf is 0x1_ff30_0000.
encoder driver got the frm_buf and send the iova to SCP firmware
through SCP IPI message, then write to encoder hardware in SCP.
The iova is stored in IPI message as uint32_t data type, so the
value will be truncated from *0x1_ff30_0000* to *0xff30_0000*,
and then *0xff30_0000* will be written to encoder hardware, but
IOMMU will help to add the high *0x1_* bit back, so IOMMU can
translate the iova to PA correctly, encoder hardware can access
the correct memory for encoding.
Another reason to do this is the encoder hardware can't access
the 34-bit iova, IOMMU will help to add the remaining high bits
of iova. But for mt8188, encoder hardware can access 34-bit iova
directly, and encoder driver need write all 34 bits because
IOMMU can't help driver do this if the hardware support access
34-bit iova.
For the reasons above, this patch is added to support transfer
34-bit iova between kernel and SCP encoder driver. Use uint64_t
data type to store the iova, for compatibility with old chipsets,
add some new struct definitions for 34-bit.
[hverkuil: initialize wb and wb_34 to NULL]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit fd9f8050e355d7fd1e126cd207b06c96cde7f783,
and changes things so that the capability string fields of the encoder
conform to their requirements.
The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.
The card name for the video encoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit fd9f8050e355 ("media: mediatek: vcodec:
Change encoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.
Instead, fill in the card name with "MTxxxx video encoder" with the
proper chip number.
Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the custom capability bus_info from the mtk-vcodec encoder
driver, and use the defaults.
As this patch removes the last usage of MTK_VCODEC_DRV_NAME, remove
the macro as well.
Fixes: fd9f8050e355 ("media: mediatek: vcodec: Change encoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit a8a7a278c56ad3b4ddd4db9a960e0537d032b0b3,
and changes things so that the capability string fields of the decoder
conform to their requirements.
This recent change caused ChromeOS's decoder to no longer function. This
is due to ChromeOS using the driver name field to match the video device
with its accompanying media device. After the change, they no longer
matched.
The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.
The card name for the video decoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit a8a7a278c56a ("media: mediatek: vcodec:
Change decoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.
Instead, fill in the card name with "MTxxxx video decoder" with the
proper chip number.
Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the custom capability bus_info from the mtk-vcodec decoder
driver, and use the defaults. This also fixes the long standing
issue where the media device used for the stateless decoder didn't
have its bus_info set, and would never match its accompanying video
device.
Fixes: a8a7a278c56a ("media: mediatek: vcodec: Change decoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The decoder parameters are stored in each instance's context data. This
needs to be initialized per-instance, but a previous fix incorrectly
changed it to only be initialized for the first opened instance. This
resulted in subsequent instances not correctly signaling the requirement
for the Requests API.
Fix this by calling the initializing function outside of the
v4l2_fh_is_singular() conditional block.
Fixes: faddaa735c20 ("media: mediatek: vcodec: Initialize decoder parameters after getting dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Right now the decoder maintains two separate lists for supported pixel
formats and frame sizes. Getting the supported frame sizes for the
current set format is a bit convoluted, requiring a search through
the separate frame size list. The frame sizes are used to clamp and
align requested resolutions.
Instead, the frame size structure could be embedded inside the pixel
format structure. Getting one also gets the other. And since the
the driver already keeps pointers to the current set format, getting
the frame sizes becomes straightforward.
Do just that. Move v4l2_frmsize_stepwise inside mtk_video_fmt, and get
rid of mtk_codec_framesizes.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit b018be06f3c7 ("media: mediatek: vcodec:
Read max resolution from dec_capability").
After the previous patches:
- media: mediatek: vcodec: decoder: Fix 4K frame size enumeration
- media: mediatek: vcodec: decoder: Skip alignment for default resolution
- media: mediatek: vcodec: decoder: Fix resolution clamping in TRY_FMT
the max_{width,height} fields in |struct mtk_vcodec_ctx| no longer have
any real users. Remove them.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In commit b018be06f3c7 ("media: mediatek: vcodec: Read max resolution
from dec_capability"), TRY_FMT clamps the resolution to the maximum
that was previously set either by default 1080p or the limit set by a
previous S_FMT call. This does not make sense when doing TRY_FMT for
the output side, which may have different capabilities.
Instead, for the output side, find the maximum resolution based on the
pixel format requested. For the capture side, find the maximum
resolution based on the currently set output format.
The maximum resolution is found from the list of per-format frame
sizes, so the patch "media: mediatek: vcodec: dec: Fix 4K frame size
enumeration" is needed.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The default resolution of 64x64 is already aligned, according to the
call to v4l_bound_align_image() in mtk_vcodec_dec_set_default_params().
Drop the redundant v4l_bound_align_image() call. This also removes one
usage of ctx->max_{width,height}.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit b018be06f3c7 ("media: mediatek: vcodec:
Read max resolution from dec_capability"). In this commit, the maximum
resolution ended up being a function of both the firmware capability and
the current set format.
However, frame size enumeration for output (coded) formats should not
depend on the format set, but should return supported resolutions for
the format requested by userspace.
Fix this so that the driver returns the supported resolutions correctly,
even if the instance only has default settings, or if the output format
is currently set to VP8F, which does not support 4K.
This adds an copy of special casing for !VP8 and 4K support. The other
existing copy will be removed when .max_{width,height} are removed from
|struct mtk_vcodec_ctx| in a subsequent patch.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
stepwise_fhd is the reference framesize variable, and should not be
altered. Make it constant.
Fixes: ("76250b48de79 media: mediatek: vcodec: Getting supported decoder format types")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mdp_ipi_comm structure defines a command that is either
PROCESS (start processing) or DEINIT (destroy instance); we
are using this one to send PROCESS or DEINIT commands from Linux
to an MDP instance through a VPU write but, while the first wants
us to stay 4-bytes aligned, the VPU instead requires an 8-bytes
data alignment.
Keeping in mind that these commands are executed immediately
after sending them (hence not chained with others before the
VPU/MDP "actually" start executing), it is fine to simply add
a padding of 4 bytes to this structure: this keeps the same
performance as before, as we're still stack-allocating it,
while avoiding hackery inside of mtk-vpu to ensure alignment
bringing a definitely bigger performance impact.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The media driver supports constant bitrate mode only.
The supported rate control mode is reported through querymenu() and
s_ctrl() fails if non constant bitrate mode (e.g. VBR) is requested.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
According to subdev_bitmap bit value to open hardware power, need to
set subdev_bitmap value for non subdev architecture.
Fixes: c05bada35f01 ("media: mtk-vcodec: Add to support multi hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The stateless decoder API does not specify the usage of SOURCE_CHANGE
and EOF events. These events are used by stateful decoders to signal
changes in the bitstream. They do not make sense for stateless decoders.
Do not handle subscription for these two types of events for stateless
decoder instances. This fixes the last v4l2-compliance error:
Control ioctls:
fail: v4l2-test-controls.cpp(946): have_source_change || have_eos
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
Fixes: 8cdc3794b2e3 ("media: mtk-vcodec: vdec: support stateless API")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Need to get dec_capability from scp first, then initialize decoder
supported format and other parameters according to dec_capability value.
Fixes: fd00d90330d1 ("media: mtk-vcodec: vdec: move stateful ops into their own file")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Modify vb2ops_vdec_buf_prepare to return EINVAL if the size of the plane
is less than the size of the image. Currently we just log an error and
return 0 anyway, which may cause a buffer overrun bug.
Signed-off-by: Justin Green <greenjustin@chromium.org>
Suggested-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Eliminate the following coccicheck warning:
./drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c:71:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix the following coccicheck warning:
drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c:
694:15-16: WARNING opportunity for min().
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Change the value of v4l2 capability parameters: driver and card.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix v4l2 capability bus_info value with correct chip name according to
compatible.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Change the value of v4l2 capability parameters: driver and card.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix v4l2 capability bus_info value with correct chip name according to
compatible.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set allow_cache_hints to 1 for the vb2_queue source and destination queues
in the mediatek vcodec V4L2 driver. This allows us to allocate buffers
with the V4L2_MEMORY_FLAG_NON_COHERENT set. On Mediatek SoCs, this enables
caching for this memory, which vastly improves performance when being read
from CPU. Read performance for these buffers is in turn important for
detiling MM21 video frames in userspace software, such as libyuv or
gstreamer.
This change should be safe from race conditions since videobuf2 already
invalidates or flushes the appropriate cache lines in its prepare() and
finish() methods.
Tested on a MT8183 SoC. Resulted in both correct detiling and a 10X
speedup.
Signed-off-by: Justin Green <greenjustin@chromium.org>
Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
set jpeg encode DMA bit mask to support 34bits
iova space(16GB) that the mt8186 iommu HW support.
Whole the iova range separate to 0~4G/4G~8G/8G~12G/12G~16G,
regarding which iova range jpgenc actually locate, it
depends on the dma-ranges property of vdec dtsi node.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to reduce decoder latency, enable H264 inner racing mode.
Send lat trans buffer information to core when trigger lat to work,
need not to wait until lat decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When SCP timeout during playing video, kernel crashes with following
message. It's caused by accessing NULL pointer in vpu_dec_ipi_handler.
This patch doesn't solve the root cause of NULL pointer, but merely
prevent kernel crashed when encounter the NULL pointer.
After applied this patch, kernel keeps alive, only the video player turns
to green screen.
[67242.065474] pc : vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec]
[67242.065485] [MTK_V4L2] level=0 fops_vcodec_open(),334:
18000000.vcodec_dec decoder [135]
[67242.065523] lr : scp_ipi_handler+0x11c/0x244 [mtk_scp]
[67242.065540] sp : ffffffbb4207fb10
[67242.065557] x29: ffffffbb4207fb30 x28: ffffffd00a1d5000
[67242.065592] x27: 1ffffffa0143aa24 x26: 0000000000000000
[67242.065625] x25: dfffffd000000000 x24: ffffffd0168bfdb0
[67242.065659] x23: 1ffffff76840ff74 x22: ffffffbb41fa8a88
[67242.065692] x21: ffffffbb4207fb9c x20: ffffffbb4207fba0
[67242.065725] x19: ffffffbb4207fb98 x18: 0000000000000000
[67242.065758] x17: 0000000000000000 x16: ffffffd042022094
[67242.065791] x15: 1ffffff77ed4b71a x14: 1ffffff77ed4b719
[67242.065824] x13: 0000000000000000 x12: 0000000000000000
[67242.065857] x11: 0000000000000000 x10: dfffffd000000001
[67242.065890] x9 : 0000000000000000 x8 : 0000000000000002
[67242.065923] x7 : 0000000000000000 x6 : 000000000000003f
[67242.065956] x5 : 0000000000000040 x4 : ffffffffffffffe0
[67242.065989] x3 : ffffffd043b841b8 x2 : 0000000000000000
[67242.066021] x1 : 0000000000000010 x0 : 0000000000000010
[67242.066055] Call trace:
[67242.066092] vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec
12220d230d83a7426fc38c56b3e7bc6066955bae]
[67242.066119] scp_ipi_handler+0x11c/0x244 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066145] mt8192_scp_irq_handler+0x70/0x128 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066172] scp_irq_handler+0xa0/0x114 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066200] irq_thread_fn+0x84/0xf8
[67242.066220] irq_thread+0x170/0x1ec
[67242.066242] kthread+0x2f8/0x3b8
[67242.066264] ret_from_fork+0x10/0x30
[67242.066292] Code: 38f96908 35003628 91004340 d343fc08 (38f96908)
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Vp8 need to use MM21, but vp9 and h264 need to use HyFbc mode
for mt8195. Vp8/vp9/h264 use the same MM21 format for mt8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds compatible for mt8195 platform.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add lat soc compatible and to support lat soc power/clk helper.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add vp9 single core decode driver to support mt8186.
[hverkuil: fix 3 small checkpatch warnings]
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Signed-off-by: Xiaoyong Lu <xiaoyong.lu@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In preparation for adding field decoding support, convert the byte arrays
for reflist into array of struct v4l2_h264_reference. That struct will
allow us to mark which field of the reference picture is being referenced.
[hverkuil: top_field_order_cnt -> pic_order_count]
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add h264 decode driver to support mt8186. For the architecture
is single core, need to add new interface to decode.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds MT8186's compatible "mediatek,mt8186-vcodec-dec".
Adds MT8186's device private data mtk_vdec_single_core_pdata.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
Mauro Carvalho Chehab
Nícolas F. R. A. Prado
Sun Ke
Dan Carpenter
Moudy Ho
Hangyu Hua
Hirokazu Honda
Yunfei Dong
Irui Wang
Ezequiel Garcia
Chen-Yu Tsai
AngeloGioacchino Del Regno
Justin Green
Yang Li
Guo Zhengkui
Haowen Bai
Julia Lawall
kyrie wu
Nicolas Dufresne