aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-24mmc: core: Fix WRITE_ZEROES CQE handlingVincent Whitchurch1-0/+1
WRITE_ZEROES requests use TRIM, so mark them as needing to be issued synchronously even when a CQE is being used. Without this, mmc_blk_mq_issue_rq() triggers a WARN_ON_ONCE() and fails the request since we don't have any handling for issuing this asynchronously. Fixes: f7b6fc327327 ("mmc: core: Support zeroout using TRIM for eMMC") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221020130123.4033218-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-17mmc: core: Fix kernel panic when remove non-standard SDIO cardMatthew Ma1-1/+2
SDIO tuple is only allocated for standard SDIO card, especially it causes memory corruption issues when the non-standard SDIO card has removed, which is because the card device's reference counter does not increase for it at sdio_init_func(), but all SDIO card device reference counter gets decreased at sdio_release_func(). Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards") Signed-off-by: Matthew Ma <mahongwei@zeku.com> Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com> Reviewed-by: John Wang <wangdayu@zeku.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-17mmc: queue: Cancel recovery work on cleanupChristian Löhle1-0/+7
To prevent any recovery work running after the queue cleanup cancel it. Any recovery running post-cleanup dereferenced mq->card as NULL and was not meaningful to begin with. Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/c865c0c9789d428494b67b820a78923e@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-17mmc: block: Remove error check of hw_reset on resetChristian Löhle1-18/+26
Before switching back to the right partition in mmc_blk_reset there used to be a check if hw_reset was even supported. This return value was removed, so there is no reason to check. Furthermore ensure part_curr is not falsely set to a valid value on reset or partition switch error. As part of this change the code paths of mmc_blk_reset calls were checked to ensure no commands are issued after a failed mmc_blk_reset directly without going through the block layer. Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds1-2/+2
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-13Merge tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds3-1/+17
Pull MMC fixes from Ulf Hansson: "MMC core: - Add SD card quirk for broken discard MMC host: - renesas_sdhi: Fix clock rounding errors - sdhci-sprd: Fix minimum clock limit to detect cards - sdhci-tegra: Use actual clock rate for SW tuning correction" * tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix minimum clock limit mmc: sdhci-tegra: Use actual clock rate for SW tuning correction mmc: renesas_sdhi: Fix rounding errors mmc: core: Add SD card quirk for broken discard
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-2/+2
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-07Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-2/+2
Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-06mmc: core: Add SD card quirk for broken discardAvri Altman3-1/+17
Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-21mmc: Merge branch fixes into nextUlf Hansson1-1/+2
Merge the mmc fixes for v6.0rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.1. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-21mmc: core: Terminate infinite loop in SD-UHS voltage switchBrian Norris1-1/+2
This loop intends to retry a max of 10 times, with some implicit termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the termination condition depends on the value reported by the SD card (*rocr), which may or may not correctly reflect what we asked it to do. Needless to say, it's not wise to rely on the card doing what we expect; we should at least terminate the loop regardless. So, check both the input and output values, so we ensure we will terminate regardless of the SD card behavior. Note that SDIO learned a similar retry loop in commit 0797e5f1453b ("mmc: core: Fixup signal voltage switch"), but that used the 'ocr' result, and so the current pre-terminating condition looks like: rocr & ocr & R4_18V_PRESENT (i.e., it doesn't have the same bug.) This addresses a number of crash reports seen on ChromeOS that look like the following: ... // lots of repeated: ... <4>[13142.846061] mmc1: Skipping voltage switch <4>[13143.406087] mmc1: Skipping voltage switch <4>[13143.964724] mmc1: Skipping voltage switch <4>[13144.526089] mmc1: Skipping voltage switch <4>[13145.086088] mmc1: Skipping voltage switch <4>[13145.645941] mmc1: Skipping voltage switch <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds. ... Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-14mmc: core: Switch to basic workqueue API for sdio_irq_workHeiner Kallweit3-5/+5
The delay parameter isn't set by any user, therefore simplify the code and switch to the basic workqueue API w/o delay support. This also reduces the size of struct mmc_host. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/13d8200a-e2a8-d907-38ce-a16fc5ce14aa@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-05Merge 6.0-rc4 into tty-nextGreg Kroah-Hartman1-28/+18
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: Make ->set_termios() old ktermios constIlpo Järvinen1-2/+2
There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-22mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failureAdrian Hunter1-26/+16
If re-initialization results is a different signal voltage, because the voltage switch failed previously, but not this time (or vice versa), then sd3_bus_mode will be inconsistent with the card because the SD_SWITCH command is done only upon first initialization. Fix by always reading SD_SWITCH information during re-initialization, which also means it does not need to be re-read later for the 1.8V fixup workaround. Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added about 1% to 1.5% to the re-initialization time, so it's not particularly significant. Reported-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Tested-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-22mmc: core: Fix UHS-I SD 1.8V workaround branchAdrian Hunter1-3/+3
When introduced, upon success, the 1.8V fixup workaround in mmc_sd_init_card() would branch to practically the end of the function, to a label named "done". Unfortunately, perhaps due to the label name, over time new code has been added that really should have come after "done" not before it. Let's fix the problem by moving the label to the correct place and rename it "cont". Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-04Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds8-31/+135
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ...
2022-07-26mmc: core: Add support for SDIO wakeup interruptAxe Yang1-0/+14
If wakeup-source flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment for in-band wakeup. If async interrupt is supported by SDIO card then enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-21mmc: core: quirks: Add of_node_put() when breaking out of loopLiang He1-1/+3
In mmc_fixup_of_compatible_match(), we should call of_node_put() when breaking out of for_each_child_of_node() which will increase and decrease the refcount during one iteration. Fixes: b360b1102670 ("mmc: core: allow to match the device tree to apply quirks") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220719091051.1210806-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-18mmc: fix disk/queue leak in case of adding disk failureMing Lei1-2/+3
In case of adding disk failure, the disk needs to be released, otherwise disk/queue is leaked. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220718160851.312972-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13mmc: block: Add single read for 4k sector cardsChristian Loehle1-14/+14
Cards with 4k native sector size may only be read 4k-aligned, accommodate for this in the single read recovery and use it. Fixes: 81196976ed946 (mmc: block: Add blk-mq support) Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/cf4f316274c5474586d0d99b17db4a4c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: core: Use mmc_card_* macro and add a new for the sd_combo typeSeunghui Lee4-13/+13
Add mmc_card_sd_combo() macro for sd combo type card and use the mmc_card_* macro to simplify code instead of comparing card->type. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20220713033635.28432-2-sh043.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: core: Replace with already defined values for readabilityChanWoo Lee1-1/+1
SD_ROCR_S18A is already defined and is used to check the rocr value, so let's replace with already defined values for readability. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: core: Do not evaluate HS400 capabilities if bus has no MMC capabilityAlexander Stein1-1/+1
If 'no-mmc' is set but 'no-mmc-hs400' is not, this warning is raised. Specifying 'no-mmc' should be enough though. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220614113905.1458715-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: debugfs: Fix file release memory leakWei Yongjun1-0/+1
When using single_open() for opening, single_release() should be used instead of seq_release(), otherwise there is a memory leak. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220608090152.179395-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: debugfs: Add debug fs error state entry for mmc driverShaik Sajida Bhanu1-0/+23
Add debug fs entry error state to query eMMC and SD card errors statistics. If any errors occurred in eMMC and SD card driver level then err_state value will be set to 1. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-5-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: debugfs: Add debug fs entry for mmc driverShaik Sajida Bhanu1-0/+56
Add debug fs entry to query eMMC and SD card errors statistics Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-4-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: core: Capture eMMC and SD card errorsShaik Sajida Bhanu1-1/+9
Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-2-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-06blk-mq: Drop blk_mq_ops.timeout 'reserved' argJohn Garry1-2/+1
With new API blk_mq_is_reserved_rq() we can tell if a request is from the reserved pool, so stop passing 'reserved' arg. There is actually only a single user of that arg for all the callback implementations, which can use blk_mq_is_reserved_rq() instead. This will also allow us to stop passing the same 'reserved' around the blk-mq iter functions next. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: simplify disk shutdownChristoph Hellwig2-2/+0
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for all disks that do not have separately allocated queues, and thus remove the need to call blk_cleanup_queue for them. Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that this function is intended only for separately allocated blk-mq queues. This saves an extra queue freeze for devices without a separately allocated queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-01mmc: block: Fix CQE recovery reset successAdrian Hunter1-2/+1
The intention of the use of mmc_blk_reset_success() in mmc_blk_cqe_recovery() was to prevent repeated resets when retrying and getting the same error. However, that may not be the case - any amount of time and I/O may pass before another recovery is needed, in which case there would be no reason to deny it the opportunity to recover via a reset if necessary. CQE recovery is expected seldom and failure to recover (if the clear tasks command fails), even more seldom, so it is better to allow the reset always, which can be done by calling mmc_blk_reset_success() always. Fixes: 1e8e55b67030c6 ("mmc: block: Add CQE support") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220531171922.76080-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-24Merge tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds5-21/+58
Pull MMC updates from Ulf Hansson: "MMC core: - Support zero-out using TRIM for eMMC - Allow to override the busy-timeout for the ioctl-cmds MMC host: - Continued the conversion of DT bindings into the JSON schema - jz4740: Apply DMA engine limits to maximum segment size - mmci_stm32: Use a buffer for unaligned DMA requests - mmc_spi: Enabled high-speed modes via parsing of DT - omap: Make clock management to be compliant with CCF - renesas_sdhi: - Support eMMC HS400 mode for R-Car V3H ES2.0 - Don't allow support for eMMC HS400 for R-Car V3M/D3 - sdhci_am654: Fix problem when SD card slot lacks the card detect line - sdhci-esdhc-imx: Add support for the imx8dxl variant - sdhci-brcmstb: Enable support for clock gating to save power - sdhci-msm: - Add support for the sdx65 variant - Add support for the sm8150 variant - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2" * tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci-of-arasan: Add NULL check for data field mmc: core: Support zeroout using TRIM for eMMC mmc: sdhci-brcmstb: Fix compiler warning mmc: sdhci-msm: Add compatible string check for sdx65 dt-bindings: mmc: sdhci-msm: Document the SDX65 compatible mmc: sdhci-msm: Add compatible string check for sm8150 dt-bindings: mmc: sdhci-msm: Add compatible string for sm8150 mmc: sdhci-msm: Add SoC specific compatibles dt-bindings: mmc: sdhci-msm: Convert bindings to yaml dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example dt-bindings: mmc: brcm,sdhci-brcmstb: correct number of reg entries mmc: sdhci-brcmstb: Enable Clock Gating to save power mmc: sdhci-brcmstb: Re-organize flags mmc: mmci: Remove custom ios handler mmc: atmel-mci: Simplify if(chan) and if(!chan) mmc: core: use kobj_to_dev() dt-bindings: mmc: sdhci-of-dwcmhsc: Add rk3588 mmc: core: Add CIDs for cards to the entropy pool mmc: core: Allows to override the timeout value for ioctl() path mmc: sdhci-omap: Use of_device_get_match_data() helper ...
2022-05-23Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block updates from Jens Axboe: "Here are the core block changes for 5.19. This contains: - blk-throttle accounting fix (Laibin) - Series removing redundant assignments (Michal) - Expose bio cache via the bio_set, so that DM can use it (Mike) - Finish off the bio allocation interface cleanups by dealing with the weirdest member of the family. bio_kmalloc combines a kmalloc for the bio and bio_vecs with a hidden bio_init call and magic cleanup semantics (Christoph) - Clean up the block layer API so that APIs consumed by file systems are (almost) only struct block_device based, so that file systems don't have to poke into block layer internals like the request_queue (Christoph) - Clean up the blk_execute_rq* API (Christoph) - Clean up various lose end in the blk-cgroup code to make it easier to follow in preparation of reworking the blkcg assignment for bios (Christoph) - Fix use-after-free issues in BFQ when processes with merged queues get moved to different cgroups (Jan) - BFQ fixes (Jan) - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming, Wolfgang, me)" * tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits) blk-mq: fix typo in comment bfq: Remove bfq_requeue_request_body() bfq: Remove superfluous conversion from RQ_BIC() bfq: Allow current waker to defend against a tentative one bfq: Relax waker detection for shared queues blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE() blk-throttle: Set BIO_THROTTLED when bio has been throttled blk-cgroup: Remove unnecessary rcu_read_lock/unlock() blk-cgroup: always terminate io.stat lines block, bfq: make bfq_has_work() more accurate block, bfq: protect 'bfqd->queued' by 'bfqd->lock' block: cleanup the VM accounting in submit_bio block: Fix the bio.bi_opf comment block: reorder the REQ_ flags blk-iocost: combine local_stat and desc_stat to stat block: improve the error message from bio_check_eod block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone block: remove superfluous calls to blkcg_bio_issue_init kthread: unexport kthread_blkcg blk-cgroup: cleanup blkcg_maybe_throttle_current ...
2022-05-19mmc: core: Fix busy polling for MMC_SEND_OP_COND againUlf Hansson1-1/+1
It turned out that polling period for MMC_SEND_OP_COND, that currently is set to 1ms, still isn't sufficient. In particular a Micron eMMC on a Beaglebone platform, is reported to sometimes fail to initialize. Additional test, shows that extending the period to 4ms is working fine, so let's make that change. Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Fixes: 1760fdb6fe9f (mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND") Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220517101046.27512-1-ulf.hansson@linaro.org
2022-05-10mmc: core: Support zeroout using TRIM for eMMCVincent Whitchurch2-4/+24
If an eMMC card supports TRIM and indicates that it erases to zeros, we can use it to support hardware offloading of REQ_OP_WRITE_ZEROES, so let's add support for this. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Link: https://lore.kernel.org/r/20220429152118.3617303-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04mmc: core: use kobj_to_dev()Minghao Chi1-1/+1
Use kobj_to_dev() instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220425105339.3515368-1-chi.minghao@zte.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: Add CIDs for cards to the entropy poolLinus Walleij2-0/+14
To make the entropy pool a bit better we can toss in the CID for eMMC and SD cards into it, usually the serial number portion is at least unique. This does not count as improvement of the entropy but in practice it makes it a bit more random to mix in these numbers. Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220425205442.1347837-1-linus.walleij@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: Allows to override the timeout value for ioctl() pathBean Huo1-4/+4
Occasionally, user-land applications initiate longer timeout values for certain commands through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220423221623.1074556-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26Merge branch 'fixes' into nextUlf Hansson1-4/+19
2022-04-26mmc: improve API to make clear hw_reset callback is for cardsWolfram Sang2-4/+4
To make it unambiguous that the hw_reset callback is for cards and not for controllers, we add 'card' to the callback name and convert all users in one go. We keep the argument as mmc_host, though, because the callback is used very early when mmc_card is not yet populated. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220408080045.6497-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: improve API to make clear that mmc_sw_reset is for cardsWolfram Sang1-1/+2
To make it unambiguous that mmc_sw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. There are no users to convert currently. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220408080045.6497-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: block: fix sloppy typing in mmc_blk_ioctl_multi_cmd()Sergey Shtylyov1-7/+9
Despite mmc_ioc_multi_cmd::num_of_cmds is a 64-bit field, its maximum value is limited to MMC_IOC_MAX_CMDS (only 255); using a 64-bit local variable to hold a copy of that field leads to gcc generating ineffective loop code: despite the source code using an *int* variable for the loop counters, the 32-bit object code uses 64-bit unsigned counters. Also, gcc has to drop the most significant word of that 64-bit variable when calling kcalloc() and assigning to mmc_queue_req::ioc_count anyway. Using the *unsigned int* variable instead results in a better code. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/eea3b0bd-6091-f005-7189-b5b7868abdb6@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: Set HS clock speed before sending HS CMD13Brian Norris1-4/+19
Way back in commit 4f25580fb84d ("mmc: core: changes frequency to hs_max_dtr when selecting hs400es"), Rockchip engineers noticed that some eMMC don't respond to SEND_STATUS commands very reliably if they're still running at a low initial frequency. As mentioned in that commit, JESD84-B51 P49 suggests a sequence in which the host: 1. sets HS_TIMING 2. bumps the clock ("<= 52 MHz") 3. sends further commands It doesn't exactly require that we don't use a lower-than-52MHz frequency, but in practice, these eMMC don't like it. The aforementioned commit tried to get that right for HS400ES, although it's unclear whether this ever truly worked as committed into mainline, as other changes/refactoring adjusted the sequence in conflicting ways: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") 53e60650f74e ("mmc: core: Allow CMD13 polling when switching to HS mode for mmc") In any case, today we do step 3 before step 2. Let's fix that, and also apply the same logic to HS200/400, where this eMMC has problems too. Resolves errors like this seen when booting some RK3399 Gru/Scarlet systems: [ 2.058881] mmc1: CQHCI version 5.10 [ 2.097545] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA [ 2.209804] mmc1: mmc_select_hs400es failed, error -84 [ 2.215597] mmc1: error -84 whilst initialising MMC card [ 2.417514] mmc1: mmc_select_hs400es failed, error -110 [ 2.423373] mmc1: error -110 whilst initialising MMC card [ 2.605052] mmc1: mmc_select_hs400es failed, error -110 [ 2.617944] mmc1: error -110 whilst initialising MMC card [ 2.835884] mmc1: mmc_select_hs400es failed, error -110 [ 2.841751] mmc1: error -110 whilst initialising MMC card Ealier versions of this patch bumped to 200MHz/HS200 speeds too early, which caused issues on, e.g., qcom-msm8974-fairphone-fp2. (Thanks for the report Luca!) After a second look, it appears that aligns with JESD84 / page 45 / table 28, so we need to keep to lower (HS / 52 MHz) rates first. Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") Fixes: 53e60650f74e ("mmc: core: Allow CMD13 polling when switching to HS mode for mmc") Fixes: 4f25580fb84d ("mmc: core: changes frequency to hs_max_dtr when selecting hs400es") Cc: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/linux-mmc/11962455.O9o76ZdvQC@g550jk/ Reported-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220422100824.v4.1.I484f4ee35609f78b932bd50feed639c29e64997e@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-17block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARDChristoph Hellwig1-1/+1
Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2] Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Chao Yu <chao@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17block: remove QUEUE_FLAG_DISCARDChristoph Hellwig1-1/+0
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-08mmc: core: improve API to make clear mmc_hw_reset is for cardsWolfram Sang3-5/+5
To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: core: Fixup support for writeback-cache for eMMC and SDMichael Wu1-3/+9
During the card initialization process, the mmc core checks whether the eMMC/SD card supports an internal writeback-cache and then enables it inside the card. Unfortunately, this isn't according to what the mmc core reports to the upper block layer. Instead, the writeback-cache support with REQ_FLUSH and REQ_FUA, are being enabled depending on whether the host supports the CMD23 (MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command. This is wrong and it may also sound awkward. In fact, it's a remnant from when both eMMC/SD cards didn't have dedicated commands/support to control the internal writeback-cache. In other words, it was the best we could do at that point in time. To fix the problem, but also without breaking backwards compatibility, let's align the REQ_FLUSH support with whether the writeback-cache became successfully enabled - for both eMMC and SD cards. Cc: stable@kernel.org Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device") Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards") Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled") Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Michael Wu <michael@allwinnertech.com> Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com [Ulf: Re-wrote the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: block: Check for errors after write on SPIChristian Löhle1-1/+33
Introduce a SEND_STATUS check for writes through SPI to not mark an unsuccessful write as successful. Since SPI SD/MMC does not have states, after a write, the card will just hold the line LOW until it is ready again. The driver marks the write therefore as completed as soon as it reads something other than all zeroes. The driver does not distinguish from a card no longer signalling busy and it being disconnected (and the line being pulled-up by the host). This lead to writes being marked as successful when disconnecting a busy card. Now the card is ensured to be still connected by an additional CMD13, just like non-SPI is ensured to go back to TRAN state. While at it and since we already poll for the post-write status anyway, we might as well check for SPIs error bits (any of them). The disconnecting card problem is reproducable for me after continuous write activity and randomly disconnecting, around every 20-50 tries on SPI DS for some card. Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-28Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-15/+2
Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
2022-03-28Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds1-0/+5
Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.