aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/rtsx_pci_sdmmc.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-11/+9
Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-02mmc: rtsx: add 74 Clocks in power on flowRicky WU1-10/+19
SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-01mmc: rtsx: Fix build errors/warnings for unused variableUlf Hansson1-6/+0
The struct device *dev, is no longer needed at various functions, let's therefore drop it to fix the build errors/warnings. Fixes: 7570fb41e450 ("mmc: rtsx: Let MMC core handle runtime PM") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220301115300.64332-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-22mmc: rtsx: Let MMC core handle runtime PMKai-Heng Feng1-18/+0
Since MMC core handles runtime PM reference counting, we can avoid doing redundant runtime PM work in the driver. That means the only thing commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") misses is to always enable runtime PM, to let its parent driver enable ASPM in the runtime idle routine. Fixes: 7499b529d97f ("mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220216055435.2335297-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PMKai-Heng Feng1-11/+33
Commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") doesn't use pm_runtime_{get,put}() helpers when it should, so the RPM refcount keeps at zero, hence its parent driver, rtsx_pci, has to do lots of weird tricks to keep it from runtime suspending. So use those helpers at right places to properly manage runtime PM. Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") Cc: Ricky WU <ricky_wu@realtek.com> Tested-by: Ricky WU <ricky_wu@realtek.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220125055010.1866563-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-24mmc: rtsx_pci: Fix long reads when clock is prescaledThomas Hebb1-13/+23
For unexplained reasons, the prescaler register for this device needs to be cleared (set to 1) while performing a data read or else the command will hang. This does not appear to affect the real clock rate sent out on the bus, so I assume it's purely to work around a hardware bug. During normal operation, the prescaler is already set to 1, so nothing needs to be done. However, in "initial mode" (which is used for sub-MHz clock speeds, like the core sets while enumerating cards), it's set to 128 and so we need to reset it during data reads. We currently fail to do this for long reads. This has no functional affect on the driver's operation currently written, as the MMC core always sets a clock above 1MHz before attempting any long reads. However, the core could conceivably set any clock speed at any time and the driver should still work, so I think this fix is worthwhile. I personally encountered this issue while performing data recovery on an external chip. My connections had poor signal integrity, so I modified the core code to reduce the clock speed. Without this change, I saw the card enumerate but was unable to actually read any data. Writes don't seem to work in the situation described above even with this change (and even if the workaround is extended to encompass data write commands). I was not able to find a way to get them working. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: rtsx: add delay before power onRicky Wu1-0/+2
To make sure voltage is below 0.5V before power on during a power cycle, add a delay of at least 100ms. The delays in the mmc core is not sufficient for the rtsx pci device. Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20210113105723.7916-1-ricky_wu@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: rtsx: Add MMC_CAP2_NO_SDIO flagRicky Wu1-1/+2
Added flag MMC_CAP2_NO_SDIO to mmc->caps2 Card Reader not support SDIO Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201230090401.12627-2-ricky_wu@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-15Merge tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-0/+71
Pull MMC updates from Ulf Hansson: "MMC core: - Initial support for SD express card/host MMC host: - mxc: Convert the driver to DT-only - mtk-sd: Add HS400 enhanced strobe support - mtk-sd: Add support for the MT8192 SoC variant - sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040 - sdhci-esdhc-imx: Convert the driver to DT-only - sdhci-pci-gli: Improve performance for HS400 mode for GL9763E - sdhci-pci-gli: Reduce power consumption for GL9755 - sdhci-xenon: Introduce ACPI support - tmio: Fix command error processing - tmio: Inform the core about the max_busy_timeout - tmio/renesas_sdhi: Support custom calculation of busy-wait time - renesas_sdhi: Reset SCC only when available - rtsx_pci: Add SD Express mode support for RTS5261 - rtsx_pci: Various fixes and improvements for RTS5261 MEMSTICK: - Minor fixes/improvements" * tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits) dt-bindings: mmc: eliminate yamllint warnings mmc: sdhci-xenon: introduce ACPI support mmc: sdhci-xenon: use clk only with DT mmc: sdhci-xenon: switch to device_* API mmc: sdhci-xenon: use match data for controllers variants dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver mmc: renesas_sdhi: populate hook for longer busy_wait mmc: tmio: add hook for custom busy_wait calculation mmc: tmio: set max_busy_timeout dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E mmc: sdhci: Use more concise device_property_read_u64 memstick: r592: Fix error return in r592_probe() mmc: mxc: Convert the driver to DT-only mmc: mxs: Remove the unused .id_table mmc: sdhci-of-arasan: Fix fall-through warnings for Clang mmc: sdhci-pci-gli: Reduce power consumption for GL9755 mmc: mediatek: depend on COMMON_CLK to fix compile tests mmc: pxamci: Fix error return code in pxamci_probe mmc: sdhci: Update firmware interface API ...
2020-12-09misc: rtsx: rts5249 support runtime PMRicky Wu1-0/+16
rtsx_pcr: add callback functions to support runtime PM add delay_work to put device to D3 after idle over 10 sec rts5249: add extra init flow for rtd3 and set rtd3_en from config setting rtsx_pci_sdmmc: child device support autosuspend Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201202065857.19412-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-16mmc: rtsx: Add test mode for RTS5261Rui Feng1-3/+16
This patch add test mode for RTS5261. If test mode is set, reader will switch to SD Express mode mandatorily, and this mode is used by factory testing only. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: rtsx_pci: Add SD Express mode support for RTS5261Rui Feng1-0/+58
RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows. 1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag. 2.If card is plugged in, Host send CMD8 to ask card's PCIe availability. 3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked, RTS5261 switch to PCIe/NVMe mode. 4.Mmc driver handover it to NVMe driver. 5.If card is unplugged, RTS5261 will switch to SD mode. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Link: https://lore.kernel.org/r/1603936703-3403-1-git-send-email-rui_feng@realsil.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4Douglas Anderson1-0/+1
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SH_MMCIF Tested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-05Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-2/+2
Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
2020-07-13mmc: rtsx_pci_sdmmc: Remove set but unused variable 'err'Lee Jones1-2/+2
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 678 | int err, i; | ^~~ Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-10-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-10misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMCRicky Wu1-0/+2
In order to support new chip rts5228, the definitions of some internal registers and workflow have to be modified. Added rts5228.c rts5228.h for independent functions of the new chip rts5228 Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-28mmc: host: Drop redundant MMC_CAP_ERASEUlf Hansson1-1/+1
The MMC_CAP_ERASE bit is no longer used by the mmc core as erase, discard and trim operations are now always supported. Therefore, drop the bit and move all mmc hosts away from using it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Link: https://lore.kernel.org/r/20200508112902.23575-1-ulf.hansson@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-18mmc: rtsx_pci: Fix support for speed-modes that relies on tuningRicky Wu1-5/+8
The TX/RX register should not be treated the same way to allow for better support of tuning. Fix this by using a default initial value for TX. Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com [Ulf: Updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.236620792@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-29misc: rtsx: Move Realtek Card Reader Driver to miscRui Feng1-1/+1
Because Realtek card reader drivers are pcie and usb drivers, and they bridge mmc subsystem and memstick subsystem, they are not mfd drivers. Greg and Lee Jones had a discussion about where to put the drivers, the result is that misc is a good place for them, so I move all files to misc. If I don't move them to a right place, I can't add any patch for this driver. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-30mmc: rtsx: fix tuning fail on gen3 PCI-Expressrui_feng1-20/+18
On gen3 PCI-Express we should send command one by one. If sending many commands in one packet will lead to a failure. Signed-off-by: rui_feng <rui_feng@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: use empty initializer list to zero-clear structuresMasahiro Yamada1-1/+1
In the MMC subsystem, we see such initializers that only clears the first member explicitly. For example, struct mmc_request mrq = {NULL}; sets the first member (.sbc) to NULL explicitly. However, this is an unstable form because we may insert a non-pointer member at the top of the struct mmc_request in the future. (if we do so, the compiler will spit warnings.) So, using a designated initializer is preferred coding style. The expression above is equivalent to: struct mmc_request mrq = { .sbc = NULL }; Of course, this does not express our intention. We want to fill all struct members with zeros. Please note struct members are implicitly zero-cleared unless otherwise specified in the initializer. After all, the most reasonable (and stable) form is: struct mmc_request mrq = {}; Do likewise for mmc_command, mmc_data as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: delete is_first_req parameter from pre-request callbackLinus Walleij1-2/+1
The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: rtsx_pci: use new macro for R1 without CRCWolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-29mmc: rtsx_pci: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-10/+2
The workqueue "workq" provides support for sd/mmc async request, which makes next request do dma_map_sg() while previous request transferring data. The workqueue has a single workitem(&host->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in rtsx_pci_sdmmc_drv_remove() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-29mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requestsUlf Hansson1-1/+1
Cc: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Mauro Santos <registo.mailling@gmail.com>
2016-07-29mmc: rtsx_pci: Use the provided busy timeout from the mmc coreUlf Hansson1-1/+1
The rtsx_pci driver is using a fixed 3s timeout for R1B responses, which in some cases isn't suffient. For example, erase/discard requests may require longer timeouts. Instead of always using a fixed timeout, let's use the per request calculated busy timeout from the mmc core. Cc: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Mauro Santos <registo.mailling@gmail.com>
2015-06-01mmc: rtsx: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: check sg_count before long data xferMicky Ching1-2/+9
Check sg_count before sending long data xfer. Because dma_map_sg() return int, and sg_count may be negative, so using int instead of unsigned. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: finish request if no card existMicky Ching1-2/+7
Return error-code directly if no card exist, this can make card remove faster. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: swap function position to avoid pre declarationMicky Ching1-103/+100
move function sd_read_data()/sd_write_data() behind sd_send_cmd_get_rsp() to avoid pre-declaration. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add support for sdio cardMicky Ching1-96/+138
Modify transfer mode for support sdio card, send cmd and data at the same time for read data transfer, but send data after cmd for write data transfer. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add helper function to simplify codeMicky Ching1-44/+51
To support sdio card, transfer mode need make a change, this need to split code and use it in different place, Add new function to simplify repeat operation. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: init cookie at probe/card_eventMicky Ching1-0/+2
host->cookie is used for handle async request, we should init it to negative value when new card inserted, make cookie value invalid. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add dump_reg_range to simplify dump registerMicky Ching1-17/+21
Add a new function to dump register within a range. We print 1 register a line before this patch, this may make debug info too long when we add more register to dump. The new dump_reg_range() dump to 8 register a line, and it is easy to use. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24mmc: rtsx_pci: Set power related cap2 macrosRoger Tseng1-0/+1
Set MMC_CAP2_NO_PRESCAN_POWERUP and MMC_CAP2_FULL_PWR_CYCLE for rtsx_pci_sdmmc and rtsx_usb_sdmmc to reflect properties of Realtek card reader hosts. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove .owner field for drivers using module_platform_driverPeter Griffin1-1/+0
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 responseRoger Tseng1-0/+7
Current code erroneously fill the last byte of R2 response with an undefined value. In addition, the controller actually 'offloads' the last byte (CRC7, end bit) while receiving R2 response and thus it's impossible to get the actual value. This could cause mmc stack to obtain inconsistent CID from the same card after resume and misidentify it as a different card. Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2. Cc: <stable@vger.kernel.org> # v3.8+ Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-07-09mmc: rtsx: add support for async requestMicky Ching1-6/+127
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow speed CPU. Test on intel i3(800MHz - 2.3GHz) performance mode(2.3GHz), SD card clock 208MHz run dd if=/dev/mmcblk0 of=/dev/null bs=64k count=1024 before: 67108864 bytes (67 MB) copied, 0.85427 s, 78.6 MB/s after: 67108864 bytes (67 MB) copied, 0.74799 s, 89.7 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-10Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds1-0/+5
Pull MMC update from Chris Ball: "MMC highlights for 3.16: Core: - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v - if card init at 3.3v doesn't work, try 1.8v and 1.2v too Drivers: - moxart: New driver for MOXA ART SoCs - rtsx_usb_sdmmc: New driver for Realtek USB card readers - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support - sunxi: New driver for Allwinner sunxi SoCs - usdhi6rol0: New driver for Renesas SD/SDIO controller" * tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits) mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller mmc: sdhci-of-esdhc: Fixup compile error mmc: tegra: fix reporting of base clock frequency mmc: tegra: disable UHS modes mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler MAINTAINERS: mmc: Add path to git tree mmc: dove: fix missing MACH_DOVE dependency mmc: sdhci: SD tuning is broken for some controllers mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support mmc: omap_hsmmc: split omap-dma header file mmc: omap_hsmmc: fix cmd23 multiblock read/write mmc: omap_hsmmc: use devm_ioremap_resource mmc: omap_hsmmc: use devm_request_threaded_irq mmc: omap_hsmmc: use devm_request_irq mmc: omap_hsmmc: use devm_clk_get mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value mmc: omap: Use DIV_ROUND_UP instead of open coded ...
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching1-350/+68
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-22mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching1-0/+3
a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: rtsx: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon1-0/+2
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS. CC: Wei WANG <wei_wang@realsil.com.cn> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: add support for pre_req and post_reqMicky Ching1-68/+350
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow CPU(for some embedded platform). Users can get a great benefit from this patch. if CPU frequency is 800MHz, SDR104 or DDR50 card read/write speed may increase more than 15%. test results: intel i3(800MHz - 2.3GHz), SD card clock 208MHz performance mode(2.3GHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.18191 s, 56.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.09276 s, 61.4 MB/s powersave mode(800MHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.29569 s, 51.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.11218 s, 60.3 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: modify phase searching method for tuningMicky Ching1-80/+32
The new phase searching method is more concise and easier to understand. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: fix card poweroff bugMicky Ching1-1/+2
If the host driver removed while card in the slot, the host will not power off card power correctly. This bug is produced because host eject flag set before the last mmc_set_ios callback, we should set the eject flag after power off. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2013-10-30mmc: rtsx: Remove redundant suspend and resume callbacksUlf Hansson1-33/+0
Suspend and resume of cards are handled by the protocol layer and consequently the mmc_suspend|resume_host APIs are marked as deprecated. While moving away from using the deprecated APIs, there are nothing left to be done for the suspend and resume callbacks, so remove them. Cc: Wei WANG <wei_wang@realsil.com.cn> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: clean up duplicate macrosJackey Shen1-1/+1
Clean up the duplicate macros: mmc_sd_card_uhs -> mmc_card_uhs mmc_sd_card_set_uhs -> mmc_card_set_uhs Signed-off-by: Jackey Shen <jackey.shen@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-30mmc: memstick: rtsx: Modify copyright commentsWei WANG1-2/+1
Update copyright date, and remove author address. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage failWei WANG1-1/+8
If switching voltage fails, SD_CLK toggle enable bit should been cleared so that SD host can control SD clock automatically. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.