aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-27mtd: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-mtd@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2-0/+3
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-23ubi: Mark expected switch fall-throughsGustavo A. R. Silva2-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1373884 ("Missing break in switch") Addresses-Coverity-ID: 114869 ("Missing break in switch") Addresses-Coverity-ID: 114870 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtdLinus Torvalds85-5150/+4644
Pull mtd updates from Boris Brezillon: "SPI NOR core changes: - Support non-uniform erase size - Support controllers with limited TX fifo size Driver changes: - m25p80: Re-issue a WREN command after each write access - cadence: Pass a proper dir value to dma_[un]map_single() - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B addressing opcodes are properly handled - intel-spi: Add a new PCI entry for Ice Lake Raw NAND core changes: - Two batchs of cleanups of the NAND API, including: * Deprecating a lot of interfaces (now replaced by ->exec_op()). * Moving code in separate drivers (JEDEC, ONFI), in private files (internals), in platform drivers, etc. * Functions/structures reordering. * Exclusive use of the nand_chip structure instead of the MTD one all across the subsystem. - Addition of the nand_wait_readrdy/rdy_op() helpers. Raw NAND controllers drivers changes: - Various coccinelle patches. - Marvell: * Use regmap_update_bits() for syscon access. * More documentation. * BCH failure path rework. * More layouts to be supported. * IRQ handler complete() condition fixed. - Fsl_ifc: * SRAM initialization fixed for newer controller versions. - Denali: * Fix licenses mismatch and use a SPDX tag. * Set SPARE_AREA_SKIP_BYTES register to 8 if unset. - Qualcomm: * Do not include dma-direct.h. - Docg4: * Removed. - Ams-delta: * Use of a GPIO lookup table * Internal machinery changes. Raw NAND chip drivers changes: - Toshiba: * Add support for Toshiba memory BENAND * Pass a single nand_chip object to the status helper. - ESMT: * New driver to retrieve the ECC requirements from the 5th ID byte. MTD changes: - physmap cleanups/fixe - gpio-addr-flash cleanups/fixes" * tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits) jffs2: free jffs2_sb_info through jffs2_kill_sb() mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash mtd: maps: gpio-addr-flash: Convert to gpiod mtd: maps: gpio-addr-flash: Replace array with an integer mtd: maps: gpio-addr-flash: Use order instead of size mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus mtd: devices: m25p80: Make sure WRITE_EN is issued before each write mtd: spi-nor: Support controllers with limited TX FIFO size mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single mtd: spi-nor: parse SFDP Sector Map Parameter Table mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories mtd: rawnand: marvell: fix the IRQ handler complete() condition mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered" mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper mtd: maps: gpio-addr-flash: Use devm_* functions mtd: maps: gpio-addr-flash: Fix ioremapped size mtd: maps: gpio-addr-flash: Replace custom printk mtd: physmap_of: Release resources on error ...
2018-10-19Merge tag 'nand/for-4.20' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon77-4952/+3701
NAND core changes: - Two batchs of cleanups of the NAND API, including: * Deprecating a lot of interfaces (now replaced by ->exec_op()). * Moving code in separate drivers (JEDEC, ONFI), in private files (internals), in platform drivers, etc. * Functions/structures reordering. * Exclusive use of the nand_chip structure instead of the MTD one all across the subsystem. - Addition of the nand_wait_readrdy/rdy_op() helpers. Raw NAND controllers drivers changes: - Various coccinelle patches. - Marvell: * Use regmap_update_bits() for syscon access. * More documentation. * BCH failure path rework. * More layouts to be supported. * IRQ handler complete() condition fixed. - Fsl_ifc: * SRAM initialization fixed for newer controller versions. - Denali: * Fix licenses mismatch and use a SPDX tag. * Set SPARE_AREA_SKIP_BYTES register to 8 if unset. - Qualcomm: * Do not include dma-direct.h. - Docg4: * Removed. - Ams-delta: * Use of a GPIO lookup table * Internal machinery changes. Raw NAND chip drivers changes: - Toshiba: * Add support for Toshiba memory BENAND * Pass a single nand_chip object to the status helper. - ESMT: * New driver to retrieve the ECC requirements from the 5th ID byte.
2018-10-19Merge tag 'spi-nor/for-4.20' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon5-86/+882
Core changes: * Support non-uniform erase size * Support controllers with limited TX fifo size Driver changes: * m25p80: Re-issue a WREN command after each write access * cadence: Pass a proper dir value to dma_[un]map_single() * fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B addressing opcodes are properly handled * intel-spi: Add a new PCI entry for Ice Lake
2018-10-16mtd_blkdevs: convert to blk-mqJens Axboe1-37/+63
Straight forward conversion, using an internal list to enable the driver to pull requests at will. Dynamically allocate the tag set to avoid having to pull in the block headers for blktrans.h, since various mtd drivers use block conflicting names for defines and functions. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-12mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MBLiu Xiang1-0/+1
If the size of spi-nor flash is larger than 16MB, the read_opcode is set to SPINOR_OP_READ_1_1_4_4B, and fsl_qspi_get_seqid() will return -EINVAL when cmd is SPINOR_OP_READ_1_1_4_4B. This can cause read operation fail. Fixes: e46ecda764dc ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: <stable@vger.kernel.org> Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-12mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flashMika Westerberg1-0/+1
Intel Ice Lake exposes the SPI serial flash controller as a PCI device in the same way than Intel Denverton. Add Ice Lake SPI serial flash PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: maps: gpio-addr-flash: Convert to gpiodRicardo Ribalda Delgado1-34/+21
Convert from legacy gpio API to gpiod. Board files will have to use gpiod_lookup_tables. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: maps: gpio-addr-flash: Replace array with an integerRicardo Ribalda Delgado1-17/+17
By replacing the array with an integer we can avoid completely the bit comparison loop if the value has not changed (by far the most common case). Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: maps: gpio-addr-flash: Use order instead of sizeRicardo Ribalda Delgado1-18/+21
By using the order of the window instead of the size, we can replace a lot of expensive division and modulus on the code with simple bit operations. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the busAhmad Fatoum1-4/+10
fsl_qspi_get_seqid() may return -EINVAL, but fsl_qspi_init_ahb_read() doesn't check for error codes with the result that -EINVAL could find itself signalled over the bus. In conjunction with the LS1046A SoC's A-009283 errata ("Illegal accesses to SPI flash memory can result in a system hang") this illegal access to SPI flash memory results in a system hang if userspace attempts reading later on. Avoid this by always checking fsl_qspi_get_seqid()'s return value and bail out otherwise. Fixes: e46ecda764dc ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: devices: m25p80: Make sure WRITE_EN is issued before each writeYogesh Gaur1-15/+8
Some SPI controllers can't write nor->page_size bytes in a single step because their TX FIFO is too small, but when that happens we should make sure a WRITE_EN command before each write access and READ_SR command after each write access is issued. The core is already taking care of that, so all we have to do here is return the actual number of bytes that were written during the spi_mem_exec_op() operation. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: Support controllers with limited TX FIFO sizeYogesh Gaur1-7/+0
Some SPI controllers can't write nor->page_size bytes in a single step because their TX FIFO is too small. Allow nor->write() to return a size that is smaller than the requested write size to gracefully handle this case. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_singleNathan Chancellor1-2/+2
Clang warns when one enumerated type is converted implicitly to another. drivers/mtd/spi-nor/cadence-quadspi.c:962:47: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_dst = dma_map_single(nor->dev, buf, len, DMA_DEV_TO_MEM); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ ./include/linux/dma-mapping.h:428:66: note: expanded from macro 'dma_map_single' ~~~~~~~~~~~~~~~~~~~~ ^ drivers/mtd/spi-nor/cadence-quadspi.c:997:43: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ ./include/linux/dma-mapping.h:429:70: note: expanded from macro 'dma_unmap_single' ~~~~~~~~~~~~~~~~~~~~~~ ^ 2 warnings generated. Use the proper enums from dma_data_direction to satisfy Clang. DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2 Link: https://github.com/ClangBuiltLinux/linux/issues/108 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: parse SFDP Sector Map Parameter TableTudor Ambarus1-16/+303
Add support for the SFDP (JESD216B) Sector Map Parameter Table. This table is optional, but when available, we parse it to identify the location and size of sectors within the main data array of the flash memory device and to identify which Erase Types are supported by each sector. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memoriesTudor Ambarus1-42/+557
Based on Cyrille Pitchen's patch https://lkml.org/lkml/2017/3/22/935. This patch is a transitional patch in introducing the support of SFDP SPI memories with non-uniform erase sizes like Spansion s25fs512s. Non-uniform erase maps will be used later when initialized based on the SFDP data. Introduce the memory erase map which splits the memory array into one or many erase regions. Each erase region supports up to 4 erase types, as defined by the JEDEC JESD216B (SFDP) specification. To be backward compatible, the erase map of uniform SPI NOR flash memories is initialized so it contains only one erase region and this erase region supports only one erase command. Hence a single size is used to erase any sector/block of the memory. Besides, since the algorithm used to erase sectors on non-uniform SPI NOR flash memories is quite expensive, when possible, the erase map is tuned to come back to the uniform case. The 'erase with the best command, move forward and repeat' approach was suggested by Cristian Birsan in a brainstorm session, so: Suggested-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: rawnand: marvell: fix the IRQ handler complete() conditionMiquel Raynal1-1/+1
With the current implementation, the complete() in the IRQ handler is supposed to be called only if the register status has one or the other RDY bit set. Other events might trigger an interrupt as well if enabled, but should not end-up with a complete() call. For this purpose, the code was checking if the other bits were set, in this case complete() was not called. This is wrong as two events might happen in a very tight time-frame and if the NDSR status read reports two bits set (eg. RDY(0) and RDDREQ) at the same time, complete() was not called. This logic would lead to timeouts in marvell_nfc_wait_op() and has been observed on PXA boards (NFCv1) in the Hamming write path. Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Reported-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Daniel Mack <daniel@zonque.org>
2018-10-08mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unsetMasahiro Yamada1-4/+10
NAND devices need additional data area (OOB) for error correction, but it is also used for Bad Block Marker (BBM). In many cases, the first byte in OOB is used for BBM, but the location actually depends on chip vendors. The NAND controller should preserve the precious BBM to keep track of bad blocks. In Denali IP, the SPARE_AREA_SKIP_BYTES register is used to specify the number of bytes to skip from the start of OOB. The ECC engine will automatically skip the specified number of bytes when it gets access to OOB area. The same value for SPARE_AREA_SKIP_BYTES should be used between firmware and the operating system if you intend to use the NAND device across the control hand-off. In fact, the current denali.c code expects firmware to have already set the SPARE_AREA_SKIP_BYTES register, then reads the value out. If no firmware (or bootloader) has initialized the controller, the register value is zero, which is the default after power-on-reset. In other words, the Linux driver cannot initialize the controller by itself. Some possible solutions are: [1] Add a DT property to specify the skipped bytes in OOB [2] Associate the preferred value with compatible [3] Hard-code the default value in the driver My first attempt was [1], but in the review process, [3] was suggested as a counter-implementation. (https://lore.kernel.org/patchwork/patch/983055/) The default value 8 was chosen to match to the boot ROM of the UniPhier platform. The preferred value may vary by platform. If so, please trade up to a different solution. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-08mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered"Colin Ian King2-8/+8
Trivial fix to spelling mistake struct field name, rename it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-08mtd: rawnand: toshiba: Pass a single nand_chip object to the status helperMiquel Raynal1-6/+4
Now that most of the raw NAND API is consistent and has almost all its helpers and hooks using a single nand_chip object instead of an mtd_info one (or both), let's do the same cleanup in the raw NAND vendors drivers. Apply this change to the Toshiba driver so that the internal helper to retrieve the ECC status does only take a nand_chip object. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-05mtd: maps: gpio-addr-flash: Use devm_* functionsRicardo Ribalda Delgado1-18/+8
By using devm functions we can make the code cleaner. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-05mtd: maps: gpio-addr-flash: Fix ioremapped sizeRicardo Ribalda Delgado1-1/+1
We should only iomap the area of the chip that is memory mapped. Otherwise we could be mapping devices beyond the memory space or that belong to other devices. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Fixes: ebd71e3a4861 ("mtd: maps: gpio-addr-flash: fix warnings and make more portable") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-05mtd: maps: gpio-addr-flash: Replace custom printkRicardo Ribalda Delgado1-7/+3
Use preferred print methods dev_* Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-05mtd: physmap_of: Release resources on errorRicardo Ribalda Delgado1-22/+5
During probe, if there was an error the memory region and the memory map were not properly released.This can lead a system unusable if deferred probe is in use. Replace mem_request and map with devm_ioremap_resource Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-04mtd: physmap_of: Remove unused struct of_device_idRicardo Ribalda Delgado1-5/+0
This struct does not seem to be used anywhere on the code Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-03mtd: rawnand: Allow selection of ECC byte ordering at runtimeBoris Brezillon7-67/+76
Currently, the selection of ECC byte ordering for software hamming is done at compilation time, which doesn't make sense when ECC byte calculation is done in hardware and byte ordering is forced by the hardware engine. In this case, only the correction is done in software and we want to force the byte-ordering no matter the value of CONFIG_MTD_NAND_ECC_SMC. This is typically the case for the FSMC (Smart Media ordering), TMIO and TXX9NDFMC (regular byte ordering) blocks. For all other use cases (pure software implementation, SM FTL and nandecctest), we keep selecting the byte ordering based on the CONFIG_MTD_NAND_ECC_SMC value. It might not be ideal for SM FTL (I'd expect Smart Media ordering to be employed by the Smart Media FTL), but this option doesn't seem to be enabled in the existing _defconfig, so I can't tell setting sm_order to true is the right choice. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transferNathan Chancellor1-2/+2
Clang warns when one enumerated type is converted implicitly to another: drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ 2 warnings generated. Use the proper enums from dma_data_direction to satisfy Clang. DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1 DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2 Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: Set port direction when neededJanusz Krzysztofik1-17/+40
In its current shape, the driver sets data port direction before each byte read/write operation, even during multi-byte transfers. Improve performance of the driver by setting the port direction only when needed. This optimisation will become particularly important as soon as planned conversion of the driver to GPIO API for data I/O will be implemented. Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: Use private structureJanusz Krzysztofik1-56/+66
Introduce a driver private structure and allocate it on device probe. Use it for storing nand_chip structure, GPIO descriptors prevoiusly stored in static variables as well as io_base pointer previously passed as nand controller data or platform driver data. Subsequent patches may populate the structure with more members as needed. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: show parent device in sysfsJanusz Krzysztofik1-1/+1
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ams-delta: use GPIO lookup tableJanusz Krzysztofik1-59/+67
Now as Amstrad Delta board - the only user of this driver - provides GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and use the table to locate required GPIO pins. Declare static variables for storing GPIO descriptors and replace gpio_ function calls with their gpiod_ equivalents. Pin naming used by the driver should be followed while respective GPIO lookup table is initialized by a board init code. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: atmel: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-0/+4
There is a potential execution path in which function of_find_compatible_node() returns NULL. In such a case, we end up having a NULL pointer dereference when accessing pointer *nfc_np* in function of_clk_get(). So, we better don't take any chances and fix this by null checking pointer *nfc_np* before calling of_clk_get(). Addresses-Coverity-ID: 1473052 ("Dereference null return value") Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: marvell: Add support for 8kiB pages NAND chips layoutKonstantin Porotchkin1-0/+2
Add support for two new layouts: 8kiB pages NAND chips, requesting either 4 or 8 bit of correctability per 512B step. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: ESMT: retrieve ECC requirements from 5th id byteMarcel Ziswiler4-1/+50
This patch enables support to read the ECC level from the NAND flash using ESMT SLC NAND ID byte 5 information as documented e.g. in the following data sheet: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F59L1G81LA(2Y).pdf Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: reorder NAND manufacturer IDsMarcel Ziswiler2-24/+24
Reorder NAND manufacturer IDs for clarity. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move JEDEC code to nand_jedec.cBoris Brezillon4-97/+118
This moves JEDEC related code to nand_jedec.c and JEDEC related struct/macros to include/linux/mtd/jedec.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move ONFI code to nand_onfi.cBoris Brezillon4-292/+317
This moves ONFI related code to nand_onfi.c and ONFI related struct/macros to include/linux/mtd/onfi.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move legacy code to nand_legacy.cBoris Brezillon4-608/+660
Allows us to move a few hundred lines of deprecated code out of the core file which is quite big. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Keep all internal stuff privateBoris Brezillon11-21/+123
A lot of things defined in rawnand.h should not be exposed to NAND controller drivers and should only be shared by core files. Create the drivers/mtd/nand/raw/internals.h header to store such definitions, and move all private defs to this header. Also remove EXPORT_SYMBOLS() on functions that are not supposed to be exposed. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Inline onfi_get_async_timing_mode()Boris Brezillon1-2/+3
onfi_get_async_timing_mode() is only used in one place inside nand_base.c. Let's inline the code and kill the helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon1-2/+1
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of a few unused definitionsBoris Brezillon1-14/+0
Those definitions are not used, let's remove them. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon37-50/+49
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon10-86/+62
Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->erase()Boris Brezillon2-3/+6
The ->erase() hook have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or the driver uses a specific path for the ERASE operation (denali), instead of implementing it generically. In any case, we should discourage people from overloading this method and encourage them to implement ->exec_op() instead. Move the ->erase() hook to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->block_{bad,markbad}() hooksBoris Brezillon7-18/+35
Those hooks have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or it was not properly implementing the OOB read/write request or had a weird layout where BBM are trashed. In any case, we should discourage people from overloading those methods and encourage them to fix their driver instead. Move the ->block_{bad,markbad}() hooks to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon39-80/+82
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.