aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/microchip/ksz9477.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-16net: dsa: microchip: add the support for set_ageing_timeArun Ramadoss1-0/+25
KSZ9477 has the 11 bit ageing count value which is split across the two registers. And LAN937x has the 20 bit ageing count which is also split into two registers. Each count in the registers represents 1 second. This patch add the support for ageing time for KSZ9477 and LAN937x series of switch. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: remove IS_9893 flagOleksij Rempel1-3/+0
Use chip_id as other places of this code do it Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: remove unused sgmii variableOleksij Rempel1-5/+0
This variable is not used. So, remove it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: ksz9477: remove unused "on" variableOleksij Rempel1-2/+0
This variable is not used on ksz9477 side. Remove it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: remove unused port phy variableOleksij Rempel1-5/+0
This variable is unused. So, drop it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: ksz9477: use internal_phy instead of phy_port_cntOleksij Rempel1-13/+7
With code refactoring was introduced new variable internal_phy. Let's use it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: ksz9477: remove MII_CTRL1000 check from ksz9477_w_phy()Oleksij Rempel1-4/+0
The reason why PHYlib may access MII_CTRL1000 on the chip without GBit support is only if chip provides wrong information about extended caps register. This issue is now handled by ksz9477_r_phy_quirks() With proper regmap_ranges provided for all chips we will be able to catch this kind of bugs any way. So, remove this sanity check. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: KSZ9893: do not write to not supported Output Clock Control RegisterOleksij Rempel1-0/+5
This issue was detected after adding regmap register access validation. KSZ9893 compatible chips do not have "Output Clock Control Register 0x0103". So, avoid writing to it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: ksz9477: add error handling to ksz9477_r/w_phyOleksij Rempel1-5/+7
Now ksz_pread/ksz_pwrite can return error value. So, make use of it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: allow to pass return values for PHY read/write accessesOleksij Rempel1-4/+8
PHY access may end with errors on different levels. So, allow to forward return values where possible. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: don't announce extended register support on non Gbit chipsOleksij Rempel1-0/+11
This issue was detected after adding support of regmap_ranges for KSZ8563R chip. This chip is reporting extended registers support without having actual extended registers. This made PHYlib request not existing registers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: dsa: microchip: do per-port Gbit detection instead of per-chipOleksij Rempel1-17/+3
KSZ8563 has two 100Mbit PHYs and CPU port with RGMII support. Since 1000Mbit configuration for the RGMII capable MAC is present, we should use per port validation. As main part of migration to per-port validation we need to rework ksz9477_switch_init() function. Which is using undocumented REG_GLOBAL_OPTIONS register to detect per-chip Gbit support. So, it is related to some sort of risk for regressions. To reduce this risk I compared the code with publicly available documentations. This function will executed on following currently supported chips: struct ksz_chip_data OF compatible KSZ9477 KSZ9477 KSZ9897 KSZ9897 KSZ9893 KSZ9893, KSZ9563 KSZ8563 KSZ8563 KSZ9567 KSZ9567 Only KSZ9893, KSZ9563, KSZ8563 document existence of 0xf == REG_GLOBAL_OPTIONS register with bit field description "SKU ID": KSZ9893 0x0C KSZ9563 0x1C KSZ8563 0x3C The existence of hidden flags is not documented. KSZ9477, KSZ9897, KSZ9567 do not document this register at all. Only KSZ8563 is documented as non Gbit chip: 100Mbit PHYs and RGMII CPU port. So, this change should not introduce a regression for configurations with properly used OF compatibles. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-17net: dsa: microchip: ksz9477: fix fdb_dump last invalid entryArun Ramadoss1-0/+3
In the ksz9477_fdb_dump function it reads the ALU control register and exit from the timeout loop if there is valid entry or search is complete. After exiting the loop, it reads the alu entry and report to the user space irrespective of entry is valid. It works till the valid entry. If the loop exited when search is complete, it reads the alu table. The table returns all ones and it is reported to user space. So bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port. To fix it, after exiting the loop the entry is reported only if it is valid one. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-27net: dsa: microchip: add support for phylink mac configArun Ramadoss1-4/+0
This patch add support for phylink mac config for ksz series of switches. All the files ksz8795, ksz9477 and lan937x uses the ksz common xmii function. Instead of calling from the individual files, it is moved to the ksz common phylink mac config function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: ksz9477: use common xmii functionArun Ramadoss1-147/+6
In ksz9477.c file, configuring the xmii register is performed based on the flag NEW_XMII. The flag is reset for ksz9893 switch and set for other switch. This patch uses the ksz common xmii set and get function. The bit values are configured based on the chip id. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: add common gigabit set and get functionArun Ramadoss1-31/+5
This patch add helper function for setting and getting the gigabit enable for the ksz series switch. KSZ8795 switch has different register address compared to all other ksz switches. KSZ8795 series uses the Port 5 Interface control 6 Bit 6 for configuring the 1Gbps or 100/10Mbps speed selection. All other switches uses the xMII control 1 0xN301 register Bit6 for gigabit. Further, for KSZ8795 & KSZ9893 switches if bit 1 then 1Gbps is chosen and if bit 0 then 100/10Mbps is chosen. It is other way around for other switches bit 0 is for 1Gbps. So, this patch implements the common function for configuring the gigabit set and get capability. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: generic access to ksz9477 static and reserved tableArun Ramadoss1-7/+20
The ksz9477 and lan937x has few difference in the static and reserved table register 0x041C. For the ksz9477 if the bit 0 is 1 - read operation and 0 - write operation. But for lan937x bit 1:0 used for selecting the read/write operation, 01 - write and 10 - read. To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks & shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then updated the function with masks & shifts based on the switch instead of hard coding it. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29net: dsa: microchip: add P_STP_CTRL to ksz_chip_regArun Ramadoss1-3/+4
This patch moves the stp_ctrl_reg from the ksz_chip_data to ksz_chip_reg structure. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: remove the ksz8/ksz9477_switch_registerArun Ramadoss1-6/+0
This patch delete the ksz8_switch_register and ksz9477_switch_register since both are calling the ksz_switch_register function. Instead the ksz_switch_register is called from the probe function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: move ksz_dev_ops to ksz_common.cArun Ramadoss1-84/+45
This patch move the ksz_dev_ops from individual files to ksz_common.c. And the dev_ops is assigned to ksz_device based on the switch detect. This reduces the redundant function and allows to reuse the functionality for LAN937x which has similar register set. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: ksz9477: separate phylink mode from switch registerArun Ramadoss1-25/+6
As per 'commit 3506b2f42dff ("net: dsa: microchip: call phy_remove_link_mode during probe")' phy_remove_link_mode is added in the switch_register function after dsa_switch_register. In order to have the common switch register function, moving this phylink validation to phylink_get_caps validation hook. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: common dsa_switch_ops for ksz switchesArun Ramadoss1-32/+1
At present, ksz8795.c and ksz9477.c have separate dsa_switch_ops structure initialization. This patch modifies the files such a way that ksz switches has common dsa_switch_ops in the ksz_common.c file. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: move start of switch to ksz_setupArun Ramadoss1-3/+0
This patch move the setting the start bit from the individual switch configuration to ksz_setup Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: move multicast enable to ksz_setupArun Ramadoss1-2/+0
This patch moves the enabling the multicast storm protection from individual setup function to ksz_setup function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: move broadcast rate limit to ksz_setupArun Ramadoss1-6/+0
This patch move the 10% broadcast protection from the individual setup to ksz_setup. In the ksz9477, broadcast protection is updated in reset function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: move setup function to ksz_commonArun Ramadoss1-20/+2
This patch move the common initialization of switches to ksz_setup and perform the switch specific initialization using the ksz_dev_ops function pointer. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: add the enable_stp_addr pointer in ksz_dev_opsArun Ramadoss1-0/+33
In order to transmit the STP BPDU packet to the CPU port, the STP address 01-80-c2-00-00-00 has to be added to static alu table for ksz8795 series switch. For the ksz9477 switch, there is reserved multicast table which handles forwarding the particular set of multicast address to cpu port. So enabling the multicast reserved table and updated the cpu port index. The stp addr is enabled during the setup phase using the enable_stp_addr pointer in struct ksz_dev_ops. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: add config_cpu_port to struct ksz_dev_opsArun Ramadoss1-1/+2
To have the common set of initialization in ksz_setup, introduced the new config_cpu_port member to ksz_dev_ops. Since both the ksz8795.c and ksz9477.c configuring the cpu port in the setup function, introduced the member. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: dsa: microchip: rename shutdown to reset in ksz_dev_opsArun Ramadoss1-2/+2
This patch renames the shutdown to reset in ksz_dev_ops in order to use the reset dev_ops in the ksz_setup. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-21net: dsa: microchip: move get_phy_flags & mtu to ksz_commonArun Ramadoss1-5/+6
This patch assigns the get_phy_flags & mtu hook of ksz8795 and ksz9477 in dsa_switch_ops to ksz_common. For get_phy_flags hooks,checks whether the chip is ksz8863/kss8793 then it returns error for port1. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: update fdb add/del/dump in ksz_commonArun Ramadoss1-14/+14
This patch makes the dsa_switch_hook for fdbs to use ksz_common.c file. And from ksz_common, individual switches fdb functions are called using the dev->dev_ops. And removed the r_dyn_mac_table, r_sta_mac_table and w_sta_mac_table from ksz_dev_ops as it is used only in ksz8795.c Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: update the ksz_port_mdb_add/delArun Ramadoss1-10/+10
ksz_mdb_add/del in ksz_common.c is specific for the ksz8795.c file. The ksz9477 has its separate ksz9477_port_mdb_add/del functions. This patch moves the ksz8795 specific mdb functionality from ksz_common to ksz8795. And this dsa_switch_ops hooks for ksz8795/ksz9477 are invoked through the ksz_port_mdb_add/del. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: update the ksz_phylink_get_capsArun Ramadoss1-4/+3
This patch assigns the phylink_get_caps in ksz8795 and ksz9477 to ksz_phylink_get_caps. And update their mac_capabilities in the respective ksz_dev_ops. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: get P_STP_CTRL in ksz_port_stp_state by ksz_dev_opsArun Ramadoss1-8/+2
At present, P_STP_CTRL register value is passed as parameter to ksz_port_stp_state from the individual dsa_switch_ops hooks. This patch update the function to retrieve the register value through the ksz_chip_data member. And add the static to ksz_update_port_member since it is not called outside the ksz_common. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: move the port mirror to ksz_commonArun Ramadoss1-6/+6
This patch updates the common port mirror add/del dsa_switch_ops in ksz_common.c. The individual switches implementation is executed based on the ksz_dev_ops function pointers. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: move vlan functionality to ksz_commonArun Ramadoss1-10/+9
This patch moves the vlan dsa_switch_ops such as vlan_add, vlan_del and vlan_filtering from the individual files ksz8795.c, ksz9477.c to ksz_common.c file. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: ksz9477: use ksz_read_phy16 & ksz_write_phy16Arun Ramadoss1-13/+10
ksz8795 and ksz9477 implementation on phy read/write hooks are different. This patch modifies the ksz9477 implementation same as ksz8795 by updating the ksz9477_dev_ops structure. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: move tag_protocol to ksz_commonArun Ramadoss1-13/+1
This patch move the dsa hook get_tag_protocol to ksz_common file. And the tag_protocol is returned based on the dev->chip_id. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: move switch chip_id detection to ksz_commonArun Ramadoss1-21/+0
KSZ87xx and KSZ88xx have chip_id representation at reg location 0. And KSZ9477 compatible switch and LAN937x switch have same chip_id detection at location 0x01 and 0x02. To have the common switch detect functionality for ksz switches, ksz_switch_detect function is introduced. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21net: dsa: microchip: ksz9477: cleanup the ksz9477_switch_detectArun Ramadoss1-26/+22
The ksz9477_switch_detect performs the detecting the chip id from the location 0x00 and also check gigabit compatibility check & number of ports based on the register global_options0. To prepare the common ksz switch detect function, routine other than chip id read is moved to ksz9477_switch_init. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-18net: dsa: microchip: add the phylink get_capsArun Ramadoss1-0/+10
This patch add the support for phylink_get_caps for ksz8795 and ksz9477 series switch. It updates the struct ksz_switch_chip with the details of the internal phys and xmii interface. Then during the get_caps based on the bits set in the structure, corresponding phy mode is set. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: dsa: move mib->cnt_ptr reset code to ksz_common.cPrasanna Vengateshan1-3/+0
mib->cnt_ptr resetting is handled in multiple places as part of port_init_cnt(). Hence moved mib->cnt_ptr code to ksz common layer and removed from individual product files. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: dsa: microchip: move get_strings to ksz_commonArun Ramadoss1-16/+1
ksz8795 and ksz9477 uses the same algorithm for copying the ethtool strings. Hence moved to ksz_common to remove the redundant code. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: dsa: microchip: move port memory allocation to ksz_commonArun Ramadoss1-22/+0
ksz8795 and ksz9477 init function initializes the memory to dev->ports, mib counters and assigns the ds real number of ports. Since both the routines are same, moved the allocation of port memory to ksz_switch_register after init. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: dsa: microchip: move struct mib_names to ksz_chip_dataArun Ramadoss1-51/+7
The ksz88xx family has one set of mib_names. The ksz87xx, ksz9477, LAN937x based switches has one set of mib_names. In order to remove redundant declaration, moved the struct mib_names to ksz_chip_data structure. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18net: dsa: microchip: move ksz_chip_data to ksz_commonArun Ramadoss1-90/+18
This patch moves the ksz_chip_data in ksz8795 and ksz9477 to ksz_common. At present, the dev->chip_id is iterated with the ksz_chip_data and then copy its value to the ksz_dev structure. These values are declared as constant. Instead of copying the values and referencing it, this patch update the dev->info to the ksz_chip_data based on the chip_id in the init function. And also update the ksz_chip_data values for the LAN937x based switches. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+34
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29net: dsa: ksz9477: port mirror sniffing limited to one portArun Ramadoss1-4/+34
This patch limits the sniffing to only one port during the mirror add. And during the mirror_del it checks for all the ports using the sniff, if and only if no other ports are referring, sniffing is disabled. The code is updated based on the review comments of LAN937x port mirror patch. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210422094257.1641396-8-prasanna.vengateshan@microchip.com/ Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20220428070709.7094-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27net: dsa: ksz9477: move get_stats64 to ksz_common.cArun Ramadoss1-96/+2
The mib counters for the ksz9477 is same for the ksz9477 switch and LAN937x switch. Hence moving it to ksz_common.c file in order to have it generic function. The DSA hook get_stats64 now can call ksz_get_stats64. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220426091048.9311-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: dsa: ksz: added the generic port_stp_state_set functionArun Ramadoss1-32/+1
The ksz8795 and ksz9477 uses the same algorithm for the port_stp_state_set function except the register address is different. So moved the algorithm to the ksz_common.c and used the dev_ops for register read and write. This function can also used for the lan937x part. Hence making it generic for all the parts. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424112831.11504-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.