linux-dev - Linux kernel development work

Age	Commit message (Collapse)	Author	Files	Lines
2017-12-15	net: dsa: mediatek: add VLAN support for MT7530	Sean Wang	1	-6/+77
	MT7530 can treat each port as either VLAN-unaware port or VLAN-aware port through the implementation of port matrix mode or port security mode on the ingress port, respectively. On one hand, Each port has been acting as the VLAN-unaware one whenever the device is created in the initial or certain port joins or leaves into/from the bridge at the runtime. On the other hand, the patch just filling the required callbacks for VLAN operations is achieved via extending the port to be into port security mode when the port is configured as VLAN-aware port. Which mode can make the port be able to recognize VID from incoming packets and look up VLAN table to validate and judge which port it should be going to. And the range for VID from 1 to 4094 is valid for the hardware. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08	net: dsa: mediatek: add adjust link support for user ports	John Crispin	1	-0/+1
	Manually adjust the port settings of user ports once PHY polling has completed. This patch extends the adjust_link callback to configure the per port PMCR register, applying the proper values polled from the PHY. Without this patch flow control was not always getting setup properly. Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07	net-next: dsa: add dsa support for Mediatek MT7530 switch	Sean Wang	1	-0/+402
	MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N platform which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC through either the TRGMII or RGMII which could be controlled by phy-mode in the dt-bindings to specify which mode is preferred to use. And for port 5, only RGMII can be specified. However, currently, only port 6 is being supported in this DSA driver. The driver is made with the reference to qca8k and other existing DSA driver. The most of the essential callbacks of the DSA are already support in the driver, including tag insert for user port distinguishing, port control, bridge offloading, STP setup and ethtool operation to allow DSA to model each user port into a standalone netdevice as the other DSA driver had done. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>