aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/mv88e6xxx.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-25net: dsa: mv88e6xxx: move driver in its own folderVivien Didelot1-652/+0
With the upcoming support for cross-chip operations and other mv88e6xxx enhancements, new files will be added. Similarly to mlxsw or b53, move mv88e6xxx files into their own folder. In the meantime, update the MAINTAINERS entry to please checkpatch.pl, by replacing the invalid 88E6352 entry with 88E6XXX, maintained by Andrew and myself. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: abstract switch registers accessesVivien Didelot1-1/+25
When the SMI address of the switch chip is zero, the chip assumes to be the only one on the SMI master bus and thus responds to all its known SMI devices addresses (port registers, Global2, etc.) When its SMI address is not zero, some chips (e.g. 88E6352) use an indirect access through two SMI Command and Data registers. Other models (e.g. 88E6060) using less than 16 internal SMI addresses always use a direct access. Add a capability flag to describe chips supporting the (indirect) Multi-chip Addressing Mode, and a low-level API to access the registers via SMI. Other accesses (like Ethernet management frames) may be added later. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add port base address to infoVivien Didelot1-0/+1
The switch ID is located at address 0x3 of every Port Registers bank. But not all Marvell switches have their Port Registers SMI Addresses starting at 0x10. 88E6060 starts at 0x8 and 88E6390 starts at 0x0. Add this data in the info structure and use it in the detection code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: rename smi_mutex to reg_lockVivien Didelot1-5/+2
The chip smi_mutex mutex is used to protect the access to the internal switch registers, not only the Multi-chip Addressing Mode, as commented. Since we will isolate SMI-specific pieces of code, avoid the confusion now by renaming smi_mutex to reg_lock. No functional changes here. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: mv88e6xxx: Refactor MDIO so driver registers mdio busAndrew Lunn1-0/+6
Have the switch driver register its own MDIO bus. This allows for an mdio property in the device tree, with child nodes for phys, which can be referenced via phandles, etc. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net: dsa: mv88e6xxx: remove bridge workVivien Didelot1-5/+0
Now that the bridge code defers the switchdev port state setting, there is no need to defer the port STP state change within the mv88e6xxx code. Thus get rid of the driver's bridge work code. This also fixes a race condition where the DSA layer assumes that the bridge code already set the unbridged port's STP state to Disabled before restoring the Forwarding state. As a consequence, this also fixes the FDB flush for the unbridged port which now correctly occurs during the Forwarding to Disabled transition. Fixes: 0bc05d585d38 ("switchdev: allow caller to explicitly request attr_set as deferred") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: mv88e6xxx: Handle eeprom-length propertyAndrew Lunn1-0/+3
A switch can export an attached EEPROM using the standard ethtool API. However the switch itself cannot determine the size of the EEPROM, and multiple sizes are allowed. Thus a device tree property is supported to indicate the length of the EEPROM. Parse this property during device probe, and implement a callback function to retrieve it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Move gpio reset into switch driverAndrew Lunn1-0/+7
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: dsa: mv88e6xxx: add STU capabilityVivien Didelot1-2/+14
Some switch models have a STU (per VLAN port state database). Add a new capability flag to switches info, instead of checking their family. Also if the 6165 family has an STU, it must have a VTU, so add the MV88E6XXX_FLAG_VTU to its family flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize the switch driverVivien Didelot1-70/+21
Now that all drivers support the same set of functions and the same setup code, drop every model-specific DSA switch driver and replace them with a common mv88e6xxx driver. This merges the info tables into one, removes the function exports, the model-specific files, and update the defconfigs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize switch setupVivien Didelot1-2/+1
Provide a shared mv88e6xxx_setup function to the drivers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize global setupVivien Didelot1-1/+0
Every driver is calling mv88e6xxx_setup_global after mv88e6xxx_setup_common. Call the former in the latter. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize switch resetVivien Didelot1-1/+5
Add a MV88E6XXX_FLAG_PPU_ACTIVE flag to describe how to reset the switch, and merge the reset call to the common setup code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize ATU accessVivien Didelot1-6/+18
Add a MV88E6XXX_FLAG_ATU flag to identify switch models with an Address Translation Unit. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize VTU accessVivien Didelot1-6/+18
Add a MV88E6XXX_FLAG_VTU flag to indentify switch models with a VLAN Table Unit. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize bridge supportVivien Didelot1-8/+30
Add MV88E6XXX_FLAG_PORTSTATE and MV88E6XXX_FLAG_VLANTABLE flags to identify switch models with required 802.1D operations. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize EEE accessVivien Didelot1-2/+9
Add a MV88E6XXX_FLAG_EEE flag to describe switch models featuring Energy Efficient Ethernet. Use it to conditionally support such access in the common code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize MAC address settingVivien Didelot1-3/+14
Some switch models have a dedicated register for Switch MAC/WoF/WoL. This register, when present, is used to indirectly set the switch MAC address, instead of a direct write to 3 global registers. Identify this feature and share a common mv88e6xxx_set_addr function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize temperature accessVivien Didelot1-4/+18
Add MV88E6XXX_FLAG_TEMP and MV88E6XXX_FLAG_TEMP_LIMIT flags to describe switch models featuring a temperature access. Use them to centralize the access to the temperature feature. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize EEPROM accessVivien Didelot1-4/+14
Add a MV88E6XXX_FLAG_EEPROM flag to describe switch models featuring an EEPROM and distribute the EEPROM access routines to all models. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize PHY indirect accessVivien Didelot1-9/+13
Some switch has dedicated SMI PHY Command and Data registers, used to indirectly access the PHYs, instead of direct access. Identify these switch models and make mv88e6xxx_phy_{read,write} generic enough to support every models. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: factorize PHY access with PPUVivien Didelot1-9/+16
Add a MV88E6XXX_FLAG_PPU flag to describe switch models with a PHY Polling Unit. This allows to merge PPU specific PHY access code in the share code. Make the mv88e6xxx_ppu_disable and mv88e6xxx_phy_{read,write}_ppu functions use unlocked register accesses in order to call them in mv88e6xxx_phy_{read,write} in a locked context. Since the PPU code is shared, also remove NET_DSA_MV88E6XXX_NEED_PPU. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: dsa: mv88e6xxx: add flags to infoVivien Didelot1-0/+21
Add a flags bitmap to the info structure in order to identify features supported or not by the different switch models. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02net: dsa: mv88e6xxx: replace ds with ps where possibleAndrew Lunn1-5/+9
The dsa_switch structure ds is actually needed in very few places, mostly during setup of the switch. The private structure ps is however needed nearly everywhere. Pass ps, not ds internally. [vd: rebased Andrew's patch.] Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: remove switch ID from psVivien Didelot1-32/+0
ps->id is not needed anymore, so remove it as well as the related defined values. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: add number of db to infoVivien Didelot1-0/+1
Add the number of databases to the info structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: add number of ports to infoVivien Didelot1-2/+1
Drop the ps->num_ports variable in favor of a new member of the info structure. This removes the need to assign it at setup time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: add family to infoVivien Didelot1-0/+13
Add an mv88e6xxx_family enum to the info structure for better family indentification. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: add switch infoVivien Didelot1-4/+23
Add a new switch info structure which is meant to store switch models static information, such as product number, name, number of ports, number of databases, etc. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: mv88e6xxx: drop revision probingVivien Didelot1-15/+0
There is no point in having a special case for the revision when probing a switch model. The code gets cluttered with unnecessary defines, and leads to errors when code such as mv88e6131_setup compares PORT_SWITCH_ID_6131_B2 to ps->id which masks the revision. Drop every revision definition, and lookup only the product number. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17net: dsa: constify probed nameVivien Didelot1-4/+4
Change the dsa_switch_driver.probe function to return a const char *. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16dsa: mv88e6xxx: Kill the REG_READ and REG_WRITE macrosAndrew Lunn1-21/+0
These macros hide a ds variable and a return statement on error, which can lead to locking issues. Kill them off. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Keep the mii bus and address in the private structureAndrew Lunn1-3/+11
Rather than looking up the mii bus and address every time, do it once at probe, and keep it in the private structure. Centralise this probe code in mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: dsa: Have the switch driver allocate there own private memoryAndrew Lunn1-0/+3
Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08net: dsa: make the VLAN add function return voidVivien Didelot1-3/+3
The switchdev design implies that a software error should not happen in the commit phase since it must have been previously reported in the prepare phase. If an hardware error occurs during the commit phase, there is nothing switchdev can do about it. The DSA layer separates port_vlan_prepare and port_vlan_add for simplicity and convenience. If an hardware error occurs during the commit phase, there is no need to report it outside the driver itself. Make the DSA port_vlan_add routine return void for explicitness. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08net: dsa: make the FDB add function return voidVivien Didelot1-3/+3
The switchdev design implies that a software error should not happen in the commit phase since it must have been previously reported in the prepare phase. If an hardware error occurs during the commit phase, there is nothing switchdev can do about it. The DSA layer separates port_fdb_prepare and port_fdb_add for simplicity and convenience. If an hardware error occurs during the commit phase, there is no need to report it outside the DSA driver itself. Make the DSA port_fdb_add routine return void for explicitness. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08net: dsa: make the STP state function return voidVivien Didelot1-1/+1
The DSA layer doesn't care about the return code of the port_stp_update routine, so make it void in the layer and the DSA drivers. Replace the useless dsa_slave_stp_update function with a dsa_slave_stp_state function used to reply to the switchdev SWITCHDEV_ATTR_ID_PORT_STP_STATE attribute. In the meantime, rename port_stp_update to port_stp_state_set to explicit the state change. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: dsa: mv88e6xxx: Clear the PDOWN bit on setupPatrick Uiterwijk1-0/+8
Some of the vendor-specific bootloaders set up this part of the initialization for us, so this was never added. However, since upstream bootloaders don't initialize the chip specifically, they leave the fiber MII's PDOWN flag set, which means that the CPU port doesn't connect. This patch checks whether this flag has been clear prior by something else, and if not make us clear it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14net: dsa: make port_bridge_leave return voidVivien Didelot1-1/+1
netdev_upper_dev_unlink() which notifies NETDEV_CHANGEUPPER, returns void, as well as del_nbp(). So there's no advantage to catch an eventual error from the port_bridge_leave routine at the DSA level. Make this routine void for the DSA layer and its existing drivers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistentAndrew Lunn1-1/+1
All the drivers support multiple chips, but mv88e6123_61_65 is the only one that reflects this in its naming. Change it to be consistent with the other drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10net: dsa: mv88e6xxx: rework port state setterVivien Didelot1-1/+1
Apply a few non-functional changes on the port state setter: * add a dynamic debug message with state names to track changes * explicit states checking instead of assuming their numeric values * lock mutex only once when changing several port states * use bitmap macros to declare and access port_state_update_mask Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: dsa: mv88e6xxx: support VLAN filteringVivien Didelot1-0/+2
Implement port_vlan_filtering in the driver to toggle the related port 802.1Q mode between DISABLED and SECURE, on user request. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: dsa: mv88e6xxx: assign default FDB to portsVivien Didelot1-0/+2
Restore per-port FDB. Assign them on setup, allow adding and deleting addresses into them, and dump them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: dsa: mv88e6xxx: assign dynamic FDB to VLANsVivien Didelot1-0/+2
Add a _mv88e6xxx_fid_new function which gives and flushes the lowest FID available. Call it when preparing a new VTU entry. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: dsa: mv88e6xxx: implement port_vlan_dumpVivien Didelot1-3/+3
Remove the port_pvid_get and vlan_getnext functions in favor of a simpler mv88e6xxx_port_vlan_dump function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: pass bridge down to driversVivien Didelot1-2/+4
Some DSA drivers may or may not support multiple software bridges on top of an hardware switch. It is more convenient for them to access the bridge's net_device for finer configuration. Removing the need to craft and access a bitmask also simplifies the code. This patch changes the signature of bridge related functions, update DSA drivers, and removes dsa_slave_br_port_mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23net: dsa: mv88e6xxx: add port private structureVivien Didelot1-1/+6
Add a per-port mv88e6xxx_priv_port structure to store per-port related data, instead of adding several arrays of DSA_MAX_PORTS elements in the mv88e6xxx_priv_state structure. It currently only contains the port STP state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23dsa: mv88e6xxx: Add Second back of statisticsAndrew Lunn1-0/+8
The 6320 family of switch chips has a second bank for statistics, but is missing three statistics in the port registers. Generalise and extend the code: * adding a field to the statistics table indicating the bank/register set where each statistics is. * add a function indicating if an individual statistics is available on this device * calculate at run time the sset_count. * return strings based on the available statistics of the device * return statistics based on the available statistics of the device * Add support for reading from the second bank. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05net: dsa: mv88e6xxx: isolate unbridged portsVivien Didelot1-0/+2
The DSA documentation specifies that each port must be capable of forwarding frames to the CPU port. The last changes on bridging support for the mv88e6xxx driver broke this requirement for non-bridged ports. So as for the bridged ports, reserve a few VLANs (4000+) in the switch to isolate ports that have not been bridged yet. By default, a port will be isolated with the CPU and DSA ports. When the port joins a bridge, it will leave its reserved port. When it is removed from a bridge, it will join its reserved VLAN again. Fixes: 5fe7f68016ff ("net: dsa: mv88e6xxx: fix hardware bridging") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03net: dsa: mv88e6xxx: disable SA learning for DSA and CPU portsAndrew Lunn1-0/+5
Frames with DSA headers passing to/from the CPU were taking place in the MAC learning on these ports, resulting in incorrect ATU entries. Disable learning on these ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.