aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence/macb_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-20net: macb: Specify PHY PM management done by MACSergiu Moga1-0/+1
The `macb_resume`/`macb_suspend` methods already call the `phylink_start`/`phylink_stop` methods during their execution so explicitly say that the PM of the PHY is done by MAC by using the `mac_managed_pm` flag of the `struct phylink_config`. This also fixes the warning message issued during resume: WARNING: CPU: 0 PID: 237 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0x144/0x148 Depends-on: 96de900ae78e ("net: phylink: add mac_managed_pm in phylink_config structure") Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221019120929.63098-1-sergiu.moga@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: macb: Fix ZynqMP SGMII non-wakeup source resume failureRadhey Shyam Pandey1-0/+4
When GEM is in SGMII mode and disabled as a wakeup source, the power management controller can power down the entire full power domain(FPD) if none of the FPD devices are in use. Incase of FPD off, there are below ethernet link up issues on non-wakeup suspend/resume. To fix it add phy_exit() in suspend and phy_init() in the resume path which reinitializes PS GTR SGMII lanes. $ echo +20 > /sys/class/rtc/rtc0/wakealarm $ echo mem > /sys/power/state After resume: $ ifconfig eth0 up xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout phy phy-fd400000.phy.0: phy poweron failed --> -110 xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout SIOCSIFFLAGS: Connection timed out phy phy-fd400000.phy.0: phy poweron failed --> -110 Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-20net: macb: Add zynqmp SGMII dynamic configuration supportRadhey Shyam Pandey1-0/+22
Add support for the dynamic configuration which takes care of configuring the GEM secure space configuration registers using EEMI APIs. High level sequence is to: - Check for the PM dynamic configuration support, if no error proceed with GEM dynamic configurations(next steps) otherwise skip the dynamic configuration. - Configure GEM Fixed configurations. - Configure GEM_CLK_CTRL (gemX_sgmii_mode). - Trigger GEM reset. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Conor Dooley <conor.dooley@microchip.com> (for MPFS) Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds1-1/+0
Pull AVR32 updates from Hans-Christian Noren Egtvedt: "Mostly changes to documentation and comments" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: video:backlight: remove reference to AVR32 architecture in ltv350qv video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver net: remove cdns,at32ap7000-macb device tree entry misc: update maintainer email address and description for atmel-ssc mfd: remove reference to AVR32 architecture in atmel-smc.c dma:dw: remove reference to AVR32 architecture in core.c
2022-08-03net: remove cdns,at32ap7000-macb device tree entryHans-Christian Noren Egtvedt1-1/+0
The AVR32 architecture has been removed from the kernel in commit 26202873bb51fafdaa51be3e8de7aab9beb49f70, hence clean out the cdns,at32ap7000-macb compatible entry in Cadence macb Ethernet driver. AVR32 architecture never supported device tree, hence this code was not used by anybody. Updated documentation to match the default entry, no users of cdns,at32ap7000-macb in the kernel tree. Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
2022-07-28net: cdns,macb: use correct xlnx prefix for XilinxKrzysztof Kozlowski1-3/+5
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet controller. The Versal compatible was not released, so it can be changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated form. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/20220726070802.26579-2-krzysztof.kozlowski@linaro.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-25net: macb: Update tsu clk usage in runtime suspend/resume for VersalHarini Katakam1-2/+15
On Versal TSU clock cannot be disabled irrespective of whether PTP is used. Hence introduce a new Versal config structure with a "need tsu" caps flag and check the same in runtime_suspend/resume before cutting off clocks. More information on this for future reference: This is an IP limitation on versions 1p11 and 1p12 when Qbv is enabled (See designcfg1, bit 3). However it is better to rely on an SoC specific check rather than the IP version because tsu clk property itself may not represent actual HW tsu clock on some chip designs. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18net: macb: fixup sparse warnings on __be16 portsBen Dooks1-3/+4
The port fields in the ethool flow structures are defined to be __be16 types, so sparse is showing issues where these are being passed to htons(). Fix these warnings by passing them to be16_to_cpu() instead. These are being used in netdev_dbg() so should only effect anyone doing debug. Fixes the following sparse warnings: drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16 Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220715173009.526126-1-ben.dooks@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: macb: sort init_reset_optional() with other init()sConor Dooley1-34/+34
init_reset_optional() is somewhat oddly placed amidst the macb_config struct definitions. Move it to a more reasonable location alongside the fu540 init functions. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: macb: simplify error paths in init_reset_optional()Conor Dooley1-13/+7
The error handling paths in init_reset_optional() can all be simplified to return dev_err_probe(). Do so. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: macb: unify macb_config alignment styleConor Dooley1-8/+8
The various macb_config structs have taken different approaches to alignment when broken over newlines. Pick one style and make them match. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: macb: add polarfire soc reset supportConor Dooley1-8/+18
To date, the Microchip PolarFire SoC (MPFS) has been using the cdns,macb compatible, however the generic device does not have reset support. Add a new compatible & .data for MPFS to hook into the reset functionality added for zynqmp support (and make the zynqmp init function generic in the process). Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet1-1/+1
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17net: macb: fix negative max_mtu size for sama5d3Oleksij Rempel1-2/+2
JML register on probe will return zero . This register is configured later on macb_init_hw() which is called on open. Since we have zero, after header and FCS length subtraction we will get negative max_mtu size. This issue was affecting DSA drivers with MTU support (for example KSZ9477). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+36
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19net: macb: Fix PTP one step sync supportHarini Katakam1-4/+36
PTP one step sync packets cannot have CSUM padding and insertion in SW since time stamp is inserted on the fly by HW. In addition, ptp4l version 3.0 and above report an error when skb timestamps are reported for packets that not processed for TX TS after transmission. Add a helper to identify PTP one step sync and fix the above two errors. Add a common mask for PTP header flag field "twoStepflag". Also reset ptp OSS bit when one step is not selected. Fixes: ab91f0a9b5f4 ("net: macb: Add hardware PTP support") Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220518170756.7752-1-harini.katakam@xilinx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13net: macb: Increment rx bd head after allocating skb and bufferHarini Katakam1-1/+1
In gem_rx_refill rx_prepared_head is incremented at the beginning of the while loop preparing the skb and data buffers. If the skb or data buffer allocation fails, this BD will be unusable BDs until the head loops back to the same BD (and obviously buffer allocation succeeds). In the unlikely event that there's a string of allocation failures, there will be an equal number of unusable BDs and an inconsistent RX BD chain. Hence increment the head at the end of the while loop to be clean. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220512171900.32593-1-harini.katakam@xilinx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11net: macb: use NAPI for TX completion pathRobert Hancock1-72/+156
This driver was using the TX IRQ handler to perform all TX completion tasks. Under heavy TX network load, this can cause significant irqs-off latencies (found to be in the hundreds of microseconds using ftrace). This can cause other issues, such as overrunning serial UART FIFOs when using high baud rates with limited UART FIFO sizes. Switch to using a NAPI poll handler to perform the TX completion work to get this out of hard IRQ context and avoid the IRQ latency impact. A separate NAPI instance is used for TX and RX to avoid checking the other ring's state unnecessarily when doing the poll, and so that the NAPI budget handling can work for both TX and RX packets. A new per-queue tx_ptr_lock spinlock has been added to avoid using the main device lock (with IRQs needing to be disabled) across the entire TX mapping operation, and also to protect the TX queue pointers from concurrent access between the TX start and TX poll operations. The TX Used Bit Read interrupt (TXUBR) handling also needs to be moved into the TX NAPI poll handler to maintain the proper order of operations. A flag is used to notify the poll handler that a UBR condition needs to be handled. The macb_tx_restart handler has had some locking added for global register access, since this could now potentially happen concurrently on different queues. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11net: macb: simplify/cleanup NAPI reschedule checkingRobert Hancock1-34/+31
Previously the macb_poll method was checking the RSR register after completing its RX receive work to see if additional packets had been received since IRQs were disabled, since this controller does not maintain the pending IRQ status across IRQ disable. It also had to double-check the register after re-enabling IRQs to detect if packets were received after the first check but before IRQs were enabled. Using the RSR register for this purpose is problematic since it reflects the global device state rather than the per-queue state, so if packets are being received on multiple queues it may end up retriggering receive on a queue where the packets did not actually arrive and not on the one where they did arrive. This will also cause problems with an upcoming change to use NAPI for the TX path where use of multiple queues is more likely. Add a macb_rx_pending function to check the RX ring to see if more packets have arrived in the queue, and use that to check if NAPI should be rescheduled rather than the RSR register. By doing this, we can just ignore the global RSR register entirely, and thus save some extra device register accesses at the same time. This also makes the previous first check for pending packets rather redundant, since it would be checking the RX ring state which was just checked in the receive work function. Therefore we can get rid of it and just check after enabling interrupts whether packets are already pending. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-22net: macb: In ZynqMP initialization make SGMII phy configuration optionalRadhey Shyam Pandey1-1/+1
In the macb binding documentation "phys" is an optional property. Make implementation in line with it. This change allows the traditional flow in which first stage bootloader does PS-GT configuration to work along with newer use cases in which PS-GT configuration is managed by the phy-zynqmp driver. It fixes below macb probe failure when macb DT node doesn't have SGMII phys handle. "macb ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY" Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-0/+8
2022-04-11net/cadence: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-14/+8
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220411013812.2517212-1-chi.minghao@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: macb: Restart tx only if queue pointer is laggingTomas Melin1-0/+8
commit 4298388574da ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of. For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume. This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface, driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+24
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: macb: Fix lost RX packet wakeup race in NAPI receiveRobert Hancock1-1/+24
There is an oddity in the way the RSR register flags propagate to the ISR register (and the actual interrupt output) on this hardware: it appears that RSR register bits only result in ISR being asserted if the interrupt was actually enabled at the time, so enabling interrupts with RSR bits already set doesn't trigger an interrupt to be raised. There was already a partial fix for this race in the macb_poll function where it checked for RSR bits being set and re-triggered NAPI receive. However, there was a still a race window between checking RSR and actually enabling interrupts, where a lost wakeup could happen. It's necessary to check again after enabling interrupts to see if RSR was set just prior to the interrupt being enabled, and re-trigger receive in that case. This issue was noticed in a point-to-point UDP request-response protocol which periodically saw timeouts or abnormally high response times due to received packets not being processed in a timely fashion. In many applications, more packets arriving, including TCP retransmissions, would cause the original packet to be processed, thus masking the issue. Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done") Cc: stable@vger.kernel.org Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com> Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10net: macb: Align the dma and coherent dma masksMarc St-Amand1-1/+1
Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-29net: macb: Added ZynqMP-specific initializationRobert Hancock1-3/+60
The GEM controllers on ZynqMP were missing some initialization steps which are required in some cases when using SGMII mode, which uses the PS-GTR transceivers managed by the phy-zynqmp driver. The GEM core appears to need a hardware-level reset in order to work properly in SGMII mode in cases where the GT reference clock was not present at initial power-on. This can be done using a reset mapped to the zynqmp-reset driver in the device tree. Also, when in SGMII mode, the GEM driver needs to ensure the PHY is initialized and powered on. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-06net: macb: use .mac_select_pcs() interfaceRussell King (Oracle)1-14/+12
Convert the PCS selection to use mac_select_pcs, which allows the PCS to perform any validation it needs. We must use separate phylink_pcs instances for the USX and SGMII PCS, rather than just changing the "ops" pointer before re-setting it to phylink as this interface queries the PCS, rather than requesting it to be changed. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-25net: macb: convert to phylink_generic_validate()Russell King (Oracle)1-103/+30
Populate the supported interfaces bitmap and MAC capabilities mask for the macb driver and remove the old validate implementation. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22Fix coverity issue 'Uninitialized scalar variable"Yacov Simhony1-1/+1
There are three boolean variable which were not initialized and later being used in the code. Signed-off-by: Yacov Simhony <ysimhony@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: macb: Fix several edge cases in validateSean Anderson1-39/+73
There were several cases where validate() would return bogus supported modes with unusual combinations of interfaces and capabilities. For example, if state->interface was 10GBASER and the macb had HIGH_SPEED and PCS but not GIGABIT MODE, then 10/100 modes would be set anyway. In another case, SGMII could be enabled even if the mac was not a GEM (despite this being checked for later on in mac_config()). These inconsistencies make it difficult to refactor this function cleanly. There is still the open question of what exactly the requirements for SGMII and 10GBASER are, and what SGMII actually supports. If someone from Cadence (or anyone else with access to the GEM/MACB datasheet) could comment on this, it would be greatly appreciated. In particular, what is supported by Cadence vs. vendor extension/limitation? To address this, the current logic is split into three parts. First, we determine what we support, then we eliminate unsupported interfaces, and finally we set the appropriate link modes. There is still some cruft related to NA, but this can be removed in a future patch. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211112190400.1937855-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: macb: Fix mdio child node detectionGuenter Roeck1-1/+1
Commit 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") added code to detect if a 'mdio' child node exists to the macb driver. Ths added code does, however, not actually check if the child node exists, but if the parent node exists. This results in errors such as macb 10090000.ethernet eth0: Could not attach PHY (-19) if there is no 'mdio' child node. Fix the code to actually check for the child node. Fixes: 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211026173950.353636-1-linux@roeck-us.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson1-6/+5
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: macb: Use mdio child node for MDIO bus if it existsSean Anderson1-0/+11
This allows explicitly specifying which children are present on the mdio bus. Additionally, it allows for non-phy MDIO devices on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: manually convert memcpy(dev_addr,..., sizeof(addr))Jakub Kicinski1-1/+1
A handful of drivers use sizeof(addr) for the size of the address, after manually confirming the size is indeed 6 convert them to eth_hw_addr_set(). Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petko Manolov <petkan@nucleusys.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04net: ethernet: use phylink_set_10g_modes()Russell King (Oracle)1-6/+1
Update three drivers to use the new phylink_set_10g_modes() helper: Cadence macb, Freescale DPAA2 and Marvell PP2. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: enable mii on rgmii for sama7g5Claudiu Beznea1-2/+4
Both MAC IPs available on SAMA7G5 support MII on RGMII feature. Enable these by adding proper capability to proper macb_config objects. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: macb: add support for mii on rgmiiClaudiu Beznea1-0/+3
Cadence IP has option to enable MII support on RGMII interface. This could be selected though bit 28 of network control register. This option is not enabled on all the IP versions thus add a software capability to be selected by the proper implementation of this IP. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13net: macb: Add PTP support for SAMA5D29Hari Prasath1-0/+9
Add PTP capability to the macb config object for sama5d29. Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com> Link: https://lore.kernel.org/r/20210812074422.13487-1-Hari.PrasathGE@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07net: macb: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-2/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-23net: macb: ensure the device is available before accessing GEMGXL control registersZong Li1-0/+3
If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: macb: Remove redundant assignment to queueJiapeng Chong1-2/+2
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.