aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cadence (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-06-23net/macb: add config for Atmel sama5d2 SoCsCyrille Pitchen1-0/+8
Add the compatible string for Atmel sama5d2 SoC family as the configuration options differ from other instances of the GEM. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+20
Conflicts: drivers/net/ethernet/cadence/macb.c drivers/net/phy/phy.c include/linux/skbuff.h net/ipv4/tcp.c net/switchdev/switchdev.c Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD} renaming overlapping with net-next changes of various sorts. phy.c was a case of two changes, one adding a local variable to a function whilst the second was removing one. tcp.c overlapped a deadlock fix with the addition of new tcp_info statistic values. macb.c involved the addition of two zyncq device entries. skbuff.h involved adding back ipv4_daddr to nf_bridge_info whilst net-next changes put two other existing members of that struct into a union. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22net: macb: Disable half duplex gigabit on ZynqNathan Sullivan2-0/+13
According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15net: macb: Add better comment for RXUBR handlingNathan Sullivan1-0/+6
Describe the handler for RXUBR better with a new comment. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewied-by: Josh Cartwright <joshc@ni.com> Reviewied-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: macb: OR vs AND typosDan Carpenter1-4/+4
The bitwise tests are always true here because it uses '|' where '&' is intended. Fixes: 98b5a0f4a228 ('net: macb: Add support for jumbo frames') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+10
Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: macb: Add change_mtu callback with jumbo supportHarini Katakam1-1/+23
Add macb_change_mtu callback; if jumbo frame support is present allow mtu size changes upto (jumbo max length allowed - headers). Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: macb: Add support for jumbo framesHarini Katakam2-4/+27
Enable jumbo frame support for Zynq Ultrascale+ MPSoC. Update the NWCFG register and descriptor length masks accordingly. Jumbo max length register should be set according to support in SoC; it is set to 10240 for Zynq Ultrascale+ MPSoC. Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: macb: Add compatible string for Zynq Ultrascale+ MPSoCHarini Katakam1-0/+8
Add compatible string and config structure for Zynq Ultrascale+ MPSoC Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: macb: Handle the RXUBR interrupt on all devicesNathan Sullivan1-1/+10
The same hardware issue the at91 must work around applies to at least the Zynq ethernet, and possibly more devices. The driver also needs to handle the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-29net: macb: Fix race condition in driver when Rx frame is droppedPunnaiah Choudary Kalluri1-0/+3
Under heavy Rx load, observed that the Hw is updating the USED bit and it is not updating the received frame status to the BD control field. This could be lack of resources for processing the BDs at high data rates. Driver drops the frame associated with this BD but not clearing the USED bit. So, this is causing hang condition as Hw expects USED bit to be cleared for this BD. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22net/macb: Factor out one-time assignment from loopBen Shelton1-2/+2
In 02c958dd3 (net/macb: add TX multiqueue support for gem), the initialization of tx_head and tx_tail in macb_init_rings() was moved inside the loop that iterates over each element in the ring. Since tx_head and tx_tail only need to be assigned once, move them back out of the loop. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-12net/macb: sqe_test_errors are TX errors, not RX errorsWolfgang Steinwender1-2/+2
The statistics are grouped by TX and RX errors. The SQE Test Errors Register indicates problems with TX. Signed-off-by: Wolfgang Steinwender <wsteinwender@pcs.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: unify peripheral version testingNicolas Ferre2-5/+7
As we need to check peripheral version from the hardware during probe, I introduce a little helper to unify these tests. It would prevent to de-synchronize the test like previously observed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: fix the peripheral version testNicolas Ferre1-1/+1
We currently need two checks of the peripheral version in MACB_MID register. One of them got out of sync after modification by 8a013a9c71b2 (net: macb: Include multi queue support for xilinx ZynqMP ethernet version). Fix this in macb_configure_caps() so that xilinx ZynqMP will be considered as a GEM flavor. Fixes: 8a013a9c71b2 ("net: macb: Include multi queue support for xilinx ZynqMP ethernet version") Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Cc: <stable@vger.kernel.org> #4.0 (if it doesn't make it for -final) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: add the user i/o to ethtool register dumpNicolas Ferre2-2/+2
User i/o register EMAC_USRIO or GMAC_UR can be found on both macb and gem flavors of the peripheral. By using the proper accessor, we can add it to the register dump feature of ethtool. Increment the version of this API so it can be noticed from user space. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: fix probe sequence to setup clocks earlierNicolas Ferre2-67/+104
As accessing the peripheral registers need the clocks to be set, we have to enable them as soon as possible. Their configuration depend on the type of device used and determined by the DT compatible string. That lead to add another initialization function in the DT configuration structure. As the device private structure length depend on an information read in the registers, we have to store the clock pointers in temporary variables before feeding the structure fields. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: trivial: correct wording for capsNicolas Ferre1-2/+2
As a non-native English speaker, I would correct "capacities" of the macb peripheral to "capabilities": correct me if I'm wrong! Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: fix capabilities configurationNicolas Ferre1-18/+18
Capabilities configuration by macb_configure_caps() was moved far too late by 421d9df0628b (net/macb: merge at91_ether driver into macb driver) which would lead to badly configured hardware. So, move this function to early probe and modify its prototype to re-gain its original behavior. DT data retrieval is also moved to simplify the probe code flow. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: add comment in macb_probe_queuesNicolas Ferre1-2/+6
As we access the MID register directly, we need to tell why we don't use the macb_is_gem() dedicated function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/macb: only probe queues once and use stored valuesNicolas Ferre2-4/+4
When merging at91_ether and macb driver during 421d9df0628b (net/macb: merge at91_ether driver into macb driver) the probe function has been split. The code dealing with initialization of queues is now moved in macb_init() which needs information computed in the parent macb_probe() function. So, add the queue_mask information to the private structure and use it when needed in macb_init(). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net/macb: Only adjust tx_clk on link changeJaeden Amero1-2/+5
The PHY state machine (in drivers/net/phy/phy.c) will unconditionally call phydev->adjust_link (macb_handle_link_change) when polling in the PHY_CHANGELINK state. As currently written, macb always ends up requesting a new tx_clk frequency in macb_handle_link_change. It is a waste of time to request a new tx_clk frequency if the link state hasn't changed, as the tx_clk will already be configured properly. Let's only request a new tx_clk clock frequency when necessary. Signed-off-by: Jaeden Amero <jaeden.amero@ni.com> Cc: Josh Cartwright <joshc@ni.com> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10macb: Fix merge error.Stephen Rothwell1-16/+0
The code removed by commit 421d9df0628b ("net/macb: merge at91_ether driver into macb driver") should be removed in the merge resolution as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+22
Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09net: macb: constify macb configuration dataJosh Cartwright1-4/+4
The configurations are not modified by the driver. Make them 'const' so that they may be placed in a read-only section. Signed-off-by: Josh Cartwright <joshc@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07net/macb: merge at91_ether driver into macb driverCyrille Pitchen5-655/+484
macb and at91_ether drivers can be compiled as modules, but the at91_ether driver use some functions and variables defined in the macb one, thus creating a dependency on the macb driver. Since these drivers are sharing the same logic we can easily merge at91_ether into macb. In order to factorize common probing logic we've added an ->init() function to struct macb_config (the structure associated with the compatible string), and moved macb specific init code from macb_probe to macb_init. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07net/macb: unify clock managementCyrille Pitchen1-17/+14
Most of the functions from the Common Clk Framework handle NULL pointer as input argument. Since the TX clock is optional, we now set tx_clk to NULL value instead of ERR_PTR(-ENOENT) when this clock is not available. This simplifies the clock management and avoid the need to test tx_clk value. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07net: macb: remove #if defined(CONFIG_ARCH_AT91) sectionsBoris BREZILLON2-15/+19
With multi platform support those sections could lead to unexpected behavior if both ARCH_AT91 and another ARM SoC using the MACB IP are selected. Add two new capabilities to encode the default MII mode and the presence of a CLKEN bit in USRIO register. Then define the appropriate config for IPs embedded in at91 SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06net: macb: Fix multi queue support for xilinx ZynqMPPunnaiah Choudary Kalluri1-1/+1
ZynqMP soc has single interrupt for all the queue events. So, passing the IRQF_SHARED flag for interrupt registration call. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06net: macb: Include multi queue support for xilinx ZynqMP ethernet versionPunnaiah Choudary Kalluri1-1/+1
Include multi queue support for the ethernet IP version in xilinx ZynqMP SoC. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05net: macb: Correct the MID field length valuePunnaiah Choudary Kalluri1-1/+1
The latest spec "I-IPA01-0266-USR Rev 10" limit the MID field length to 12 bit value. For previous versions it is 16 bit value. This change will not break the backward compatibility as the latest ID value is 7 and with in the 12 bit value limit. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04net: cadence: Remove Kconfig dependency on ARCHMichal Simek1-2/+2
Remove Kconfig dependency and enable driver for all ARCHs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: macb: Properly add DMACFG bit definitionsArun Chandran1-1/+2
Add *_SIZE macros for the bits ENDIA_DESC and ENDIA_PKT Signed-off-by: Arun Chandran <achandran@mvista.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: macb: Add on the fly CPU endianness detectionArun Chandran1-4/+18
Program management descriptor's access mode according to the dynamically detected CPU endianness. Signed-off-by: Arun Chandran <achandran@mvista.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: macb: Add big endian CPU supportArun Chandran2-13/+20
This patch converts all __raw_readl and __raw_writel function calls to their corresponding readl_relaxed and writel_relaxed variants. It also tells the driver to set ahb_endian_swp_mgmt_en bit in dma_cfg when the CPU is configured in big endian mode. Signed-off-by: Arun Chandran <achandran@mvista.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/macb: fix sparse warningLad, Prabhakar1-2/+1
this patch fixes following sparse warning: macb.c:2038:26: warning: symbol 'gem_ethtool_ops' was not declared. Should it be static? Alongside drops exporting of gem_ethtool_ops as there is no need. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: macb: Remove CONFIG_PM ifdef because of compilation warningMichal Simek1-4/+2
Fix compilation warning: drivers/net/ethernet/cadence/macb.c:2415:12: warning: 'macb_suspend' defined but not used [-Wunused-function] static int macb_suspend(struct device *dev) drivers/net/ethernet/cadence/macb.c:2432:12: warning: 'macb_resume' defined but not used [-Wunused-function] static int macb_resume(struct device *dev) when CONFIG_PM=y, CONFIG_PM_SLEEP=n are used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: macb: allow deffered probe of the driverNicolae Rosia1-4/+5
The driver is trying to acquire clocks which maybe are not available yet. Allow the driver to request deffered probe by providing a probe function and registering it with module_platform_driver. [1] This patch is based on 3.19-rc5. [1] https://lkml.org/lkml/2013/9/23/118 Signed-off-by: Nicolae Rosia <nicolae.rosia@certsign.ro> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16net/macb: Create gem_ethtool_ops for new statistics functionsXander Huff1-2/+13
10/100 MACB does not have the same statistics possibilities as GEM. Separate macb_ethtool_ops to make a new GEM-specific struct with the new statistics functions included. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16net/macb: Add whitespace around arithmetic operatorsXander Huff1-5/+5
Spaces should surround add, multiply, and bitshift operators. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16net/macb: Fix comments to meet style guidelinesXander Huff1-450/+284
Change comments to not exceed 80 characters per line. Update block comments in macb.h to start on the line after /*. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+5
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net/macb: improved ethtool statistics supportXander Huff2-4/+307
Currently `ethtool -S` simply returns "no stats available". It would be more useful to see what the various ethtool statistics registers' values are. This change implements get_ethtool_stats, get_strings, and get_sset_count functions to accomplish this. Read all GEM statistics registers and sum them into macb.ethtool_stats. Add the necessary infrastructure to make this accessible via `ethtool -S`. Update gem_update_stats to utilize ethtool_stats. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net/macb: Adding comments to various #defs to make interpretation easierXander Huff1-107/+162
This change is to help improve at-a-glace knowledge of the purpose of the various Cadence MACB/GEM registers. Comments are more helpful for human readability than short acronyms. Describe various #define varibles Cadence MACB/GEM registers as documented in Xilinix's "Zynq-7000 All Programmable SoC TechnicalReference Manual, v1.9.1 (UG-585)" Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12net/at91_ether: prepare and unprepare clockAlexandre Belloni1-5/+5
The clock is enabled without being prepared, this leads to: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:889 __clk_enable+0x24/0xa8() and a non working ethernet interface. Use clk_prepare_enable() and clk_disable_unprepare() to handle the clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15net/macb: remove useless calls of devm_free_irq()Cyrille Pitchen1-15/+8
Inside macb_probe(), when devm_request_irq() fails on queue q, there is no need to call devm_free_irq() on queues 0..q-1 because the managed device resources are released later when calling free_netdev(). Also removing devm_free_irq() call from macb_remove() for the same reason. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15net/macb: fix misplaced call of free_netdev() in macb_remove()Cyrille Pitchen1-1/+1
fix a bug introduced by the multiqueue support patch: "net/macb: add TX multiqueue support for gem" the "bp" pointer to the netdev private data was dereferenced and used after the associated memory had been freed by calling free_netdev(). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-14Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds2-2/+0
Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12net/macb: add TX multiqueue support for gemCyrille Pitchen2-164/+328
gem devices designed with multiqueue CANNOT work without this patch. When probing a gem device, the driver must first prepare and enable the peripheral clock before accessing I/O registers. The second step is to read the MID register to find whether the device is a gem or an old macb IP. For gem devices, it reads the Design Configuration Register 6 (DCFG6) to compute to total number of queues, whereas macb devices always have a single queue. Only then it can call alloc_etherdev_mq() with the correct number of queues. This is the reason why the order of some initializations has been changed in macb_probe(). Eventually, the dedicated IRQ and TX ring buffer descriptors are initialized for each queue. For backward compatibility reasons, queue0 uses the legacy registers ISR, IER, IDR, IMR, TBQP and RBQP. On the other hand, the other queues use new registers ISR[1..7], IER[1..7], IDR[1..7], IMR[1..7], TBQP[1..7] and RBQP[1..7]. Except this hardware detail there is no real difference between queue0 and the others. The driver hides that thanks to the struct macb_queue. This structure allows us to share a common set of functions for all the queues. Besides when a TX error occurs, the gem MUST be halted before writing any of the TBQP registers to reset the relevant queue. An immediate side effect is that the other queues too aren't processed anymore by the gem. So macb_tx_error_task() calls netif_tx_stop_all_queues() to notify the Linux network engine that all transmissions are stopped. Also macb_tx_error_task() now calls spin_lock_irqsave() to prevent the interrupt handlers of the other queues from running as each of them may wake its associated queue up (please refer to macb_tx_interrupt()). Finally, as all queues have previously been stopped, they should be restarted calling netif_tx_start_all_queues() and setting the TSTART bit into the Network Control Register. Before this patch, when dealing with a single queue, the driver used to defer the reset of the faulting queue and the write of the TSTART bit until the next call of macb_start_xmit(). As explained before, this bit is now set by macb_tx_error_task() too. That's why the faulting queue MUST be reset by setting the TX_USED bit in its first buffer descriptor before writing the TSTART bit. Queue 0 always exits and is the lowest priority when other queues are available. The higher the index of the queue is, the higher its priority is. When transmitting frames, the TX queue is selected by the skb->queue_mapping value. So queue discipline can be used to define the queue priority policy. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-3/+3
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.