aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-27/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23ixgbe: add status reg reads to ixgbe_check_removePaul Greenwalt1-0/+1
Add status register reads and delay between reads to ixgbe_check_remove. Registers can read 0xFFFFFFFF during PCI reset, which causes the driver to remove the adapter. The additional status register reads can reduce the chance of this race condition. If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns the value of the register being read. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09ixgbe: extend firmware version supportPaul Greenwalt1-0/+6
Extend FW version reporting by displaying information from the iSCSI or OEM block in the EEPROM. This will allow us to more accurately identify the FW. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland1-2/+2
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-03ixgbe: Implement firmware interface to access some PHYsMark Rustad1-0/+2
Implement new interface for firmware commands to access some PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix issues with EEPROM accessMark Rustad1-0/+1
There are two problems with EEPROM access. One is that it needs to hold the semaphore until the entire response is read or else the response can be corrupted by other firmware accesses. The second problem is that acquiring and releasing the semaphore is slow, so it should be taken and released once when multiple EEPROM accesses will be done. Both of these issues can be solved by adding a new function, ixgbe_hic_unlocked, to issue firmware commands that will assume that the caller has acquired the needed semaphore. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Report driver version to firmware for x550 devicesTony Nguyen1-1/+2
Some x550 devices require the driver version reported to its firmware; this patch sends the driver version string to the firmware through the host interface command for x550 devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-04ixgbe: Add support to retrieve and store LED link activeDon Skidmore1-0/+1
This patch adds support to get the LED link active via the LEDCTL register. If the LEDCTL register does not have LED link active (LED mode field = 0x0100) set then default LED link active returned. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-24ixgbe: consolidate the configuration of spoof checkingEmil Tantilov1-1/+1
Consolidate the logic behind configuring spoof checking: Move the setting of the MAC, VLAN and Ethertype spoof checking into ixgbe_ndo_set_vf_spoofchk(). Change ixgbe_set_mac_anti_spoofing() to set MAC spoofing per VF similar to the VLAN and Ethertype functions - this allows us to call the helper functions in ixgbe_ndo_set_vf_spoofchk() for all spoof check types and only disable MAC spoof checking when creating MACVLAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Clean up interface for firmware commandsMark Rustad1-2/+2
Clean up the interface for issuing firmware commands to use a void * instead of a u32 *. This eliminates a number of casts. Also clean up ixgbe_host_interface_command in a few other ways, eliminating comparisons with 0, redundant parens and minor formatting issues. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Fix flow control for Xeon D KR backplaneMark Rustad1-1/+2
Xeon D KR backplane is different from other backplanes, in that we can't use auto-negotiation to determine the mode. Instead, use whatever the user configured. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Add support for adding/removing VLAN on PF bypassing the VLVFAlexander Duyck1-1/+1
This patch adds support for bypassing the VLVF entry creation when the PF is adding a new VLAN. The advantage to doing this is that we can then save the VLVF entries for the VFs which must have them in order to function, versus the PF which can fall back on the default pool entry. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Add X550EM_x dual-speed SFP+ supportMark Rustad1-0/+5
This patch adds X550EM_x SFP+ dual-speed support. 82599 fiber link code was moved from ixgbe_82599.c to ixgbe_common.c for use by X550EM. SFP MAC link code is added to x550EM. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add new function to check for management presenceDon Skidmore1-0/+1
This patch adds a support function that will indicate for the existence of management FW. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: add array of MAC type dependent valuesDon Skidmore1-0/+2
Some of the register addresses and format where unfortunately changed between MAC types. To get around this we add a const u32 *mvals pointer to the ixgbe_hw struct to point to an array of mac-type-dependent values. These can include register offsets, masks, whatever can be in a u32. When the ixgbe_hw struct is initialized, a pointer to the appropriate array must be set. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbe: add new wrapper for X550 supportDon Skidmore1-0/+2
For the X550 mac type we have to do additional steps around enabling/disabling Rx. This patch will add a layer of indirection around these support functions to enable this. CC: <kernel-team@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add X550 support function pointersDon Skidmore1-0/+2
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: cleanup checksum to allow error resultsDon Skidmore1-1/+1
Currently the shared code checksum calculation function only returns a u16 and cannot return an error code. Unfortunately a variety of errors can happen that completely prevent the calculation of a checksum. So, change the function return value from a u16 to an s32 and return a negative value on error, or the positive checksum value when there is no error. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add x550 SW/FW semaphore supportDon Skidmore1-2/+2
The X550 hardware will use more bits in the mask, so change the prototypes to match. This larger mask will require changes in callers which use the higher bits. Likewise since X550 will use different semaphore mask values and will use the lan_id value. So save these values in the ixgbe_phy_info struct. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-8/+8
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-22ixgbe: Use out-of-line function for register readsMark Rustad1-14/+1
Register reads are slow, so don't inline them. Size before: text data bss dec hex filename 226337 8280 552 235169 396a1 ixgbe.ko Size after: text data bss dec hex filename 194578 8280 552 203410 31a92 ixgbe.ko for about a 14% reduction in text size. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: Stop cacheing if the MNG FW enabledDon Skidmore1-0/+1
We use to cache whether the MNG FW was enabled, how since this isn't static we really need to verify with each check. This patch makes that change. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: add ixgbe_write_pci_cfg_word with ixgbe_removed checkJacob Keller1-0/+1
Inline with the current use for ixgbe_read_pci_cfg_word, create a similar function for writing PCI config, which checks whether the adapter has been removed first, if Live Error Recovery has been enabled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller1-0/+1
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-02ixgbe: Check config reads for removalMark Rustad1-1/+5
Configuration space reads should also be checked for removal. So add some checks related to config space accesses. v2: * Fixed indent Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore1-1/+4
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Check for adapter removal on register writesMark Rustad1-2/+10
Prevent writes to an adapter that has been detected as removed by a previous failing read. This also fixes some include file ordering confusion that this patch revealed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Check register reads for adapter removalMark Rustad1-1/+18
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Use static inlines instead of macrosMark Rustad1-10/+26
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Temporarily provide macros for calling the new static inline accessors until all references are changed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad1-1/+5
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-30ixgbe: fix fc autoneg ethtool reporting.Don Skidmore1-1/+1
Originally ixgbe_device_supports_autoneg_fc() was only expected to be called by copper devices. This would lead to false information to be displayed via ethtool. v2: changed ixgbe_device_supports_autoneg_fc() to a bool function, it returns bool. Based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: create conversion functions from link_status to bus/speedJacob Keller1-0/+2
This patch cleans up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in a follow on patch that needs to convert between the link_status PCIe config values into ixgbe's internal enum representations. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06ixgbe: Use is_valid_ether_addrJoe Perches1-1/+0
Use the normal kernel test instead of a module specific one. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22ixgbe: ethtool correctly identify autoneg settingJacob Keller1-0/+1
This patch enables ethtool to correctly identify flow control (pause frame) auto negotiation, as well as disallow enabling it when it is not supported. The ixgbe_device_supports_autoneg_fc function is exported and used for this purpose. There is also one minor cleanup of the device_supports_autoneg_fc by removing an unnecessary return statement. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22ixgbe: Add function ixgbe_reset_pipeline_82599Don Skidmore1-0/+1
This patch adds a function that forces a full pipeline reset. This function will be used in following patches to completely reset the PHY during resets. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-19ixgbe: Correctly set SAN MAC RAR pool to default pool of PFAlexander Duyck1-0/+1
This change corrects an issue in which an FCoE enabled adapter was always setting the FCoE SAN MAC MPSAR register to 0x1. This results in the first VF being assigned the SAN MAC address in the case of SR-IOV and as such is incorrect. To resolve this I am adding a new function that will update the SAN MAC pool address after reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Update link flow control to correctly handle multiple packet buffer DCBAlexander Duyck1-1/+1
This change updates the link flow control configuration so that we correctly set the link flow control settings for DCB. Previously we would have to call the fc_enable call 8 times, once for each packet buffer. If we move that logic into the fc_enable call itself we can avoid multiple unnecessary register writes. This change also corrects an issue in which we were only shifting the water marks for 82599 parts by 6 instead of 10. This was resulting in us only using 1/16 of the packet buffer when flow control was enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Make ixgbe_fc_autoneg return void and always set current_modeAlexander Duyck1-1/+1
This change makes it so that ixgbe_fc_autoneg is a void and always sets the current_mode. Previously if the link was down we would return an error, however there is no harm in simply treating a link down case as a case in which autoneg simply failed. This allows us to rely on the return value of the ixgbe_fc_enable call now since there should be no cases where it returns an error that would normally be ignored. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-02ixgbe: add support functions to access thermal dataDon Skidmore1-0/+13
Some 82599 adapters contain thermal data that we can get to via an i2c interface. These functions provide support to get at that data. A following patch will export this data. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-04ixgbe: consolidate reporting of MSIX vectors into a single functionEmil Tantilov1-1/+1
This patch modifies ixgbe_get_pcie_msix_count_generic() to support all current HW and removes the 82598 specific function. - change the type of ixgbe_get_pcie_msix_count_generic() to u16 - include a check to make sure the maximum allowed number of vectors is not exceeded. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-14ixgbe: Fix race condition where RX buffer could become corrupted.Atita Shirwaikar1-0/+2
There was a race condition in the reset path where the RX buffer could become corrupted during Fdir configuration.This is due to a HW bug.The fix right now is to lock the buffer while we do the fdir configuration.Since we were using similar workaround for another bug, I moved the existing code to a function and reused it.HW team also recommended that IXGBE_MAX_SECRX_POLL value be changed from 30 to 40.The erratum for this bug will be published in the next release 82599 Spec Update Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-03ixgbe: Fix typo in ixgbe_common.hMasanari Iida1-1/+1
Correct spelling "packtetbuf_num" to "packetbuf_num" in drivers/net/ethernet/intel/ixgbe/ixgbe_common.h Signed-off-by: Masanari Iida <standby24x7@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2012-02-03ixgbe: update copyright to 2012Don Skidmore1-1/+1
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-23ixgbe: avoid HW lockup when adapter is reset with Tx work pendingEmil Tantilov1-1/+1
This change is meant to avoid a hardware lockup when Tx work is still pending and we request a reset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-10intel: Move the Intel wired LAN driversJeff Kirsher1-0/+145
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.