aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-27net/mlx5: Add support for NPPS with real time modeAya Levin1-20/+119
Add support for setting NPPS. NPPS is currently available in REAL_TIME_CLOCK mode only. In addition allow the user to set the pulse duration. When NPPS pulse duration is not set explicitly by the user, driver set it to 50% of the NPPS period. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-30net/mlx5: Avoid generating event after PPS out in Real time modeAya Levin1-8/+6
When in Real-time mode, HW clock is synced with the PTP daemon. Hence driver should not re-calibrate the next pulse (via MTPPSE repetitive events mechanism). This patch arms repetitive events only in free-running mode. Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-30net/mlx5: Force round second at 1PPS out start timeAya Levin1-14/+11
Allow configuration of 1PPS start time only with time-stamp representing a round second. Prior to this patch driver allowed setting of a non-round-second which is not supported by the device. Avoid unexpected behavior by restricting start-time configuration to a round-second. Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Fix typo in commentsCai Huoqing1-1/+1
Fix typo: *vectores ==> vectors *realeased ==> released *erros ==> errors *namepsace ==> namespace *trafic ==> traffic *proccessed ==> processed *retore ==> restore *Currenlty ==> Currently *crated ==> created *chane ==> change *cannnot ==> cannot *usuallly ==> usually *failes ==> fails *importent ==> important *reenabled ==> re-enabled *alocation ==> allocation *recived ==> received *tanslation ==> translation Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-16net/mlx5: Add helper to initialize 1PPSAya Levin1-8/+17
Wrap 1PPS initialization in a helper for a cleaner init flow. Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-10net/mlx5: Fix turn-off PPS commandAya Levin1-4/+4
Fix a bug of uninitialized pin index when trying to turn off PPS out. Fixes: de19cd6cc977 ("net/mlx5: Move some PPS logic into helper functions") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Add cyc2time HW translation mode supportAya Levin1-26/+171
Device timestamp can be in real time mode (cycles to time translation is offloaded into the Hardware). With real time mode, HW provides timestamp which is already translated into nanoseconds. With this mode, driver adjusts both the HW and timecounter (to keep clock_info_page updated) using callbacks: adjfreq, adjtime and settime. HW clock modifications are done via MTUTC access reg commands. Driver is allowed to modify HW real time clock only if MCAM ptpcyc2realtime_modify capability is set. Add MTUTC set function to be used for configuring the HW real time clock. Modify existing code to support both internal timer (with conversion via timecounter_cyc2time() and real time (no conversions). Align the signatures of the helpers converting from timestamp to nanoseconds. With that, when allocating a queue assign the corresponding callback with respect to the capability. Adjust 1PPS timestamp calculation flows based on the timestamp mode. Cyc2time offload brings two major advantages: - Improve MTAE (Max Time Absolute Error) for HW TS by up to 160 ns over a 100% loaded CPU. - Faster data-path timestamp to nanoseconds, as translation is lock-less and done in HW. On real time mode, timestamp format is 32 high bits of seconds and 32 low bits of nanoseconds. On some flows, driver shall convert this format into nanoseconds wall-clock with REAL_TIME_TO_NS macro. HW supports a single clock, and it is shared by all functions on a device. In case real time clock is used, it is recommended to use a single GM to all device's functions. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Move some PPS logic into helper functionsEran Ben Elisha1-40/+73
Some of PPS logic (timestamp calculations) fits only internal timer timestamp mode. Move these logics into helper functions. Later in the patchset cyc2time HW translation mode will expose its own PPS timestamp calculations. With this change, main flow will only hold calling PPS logic based on run time mode. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Move all internal timer metadata into a dedicated structEran Ben Elisha1-46/+61
Internal timer mode (SW clock) requires some PTP clock related metadata structs. Real time mode (HW clock) will not need these metadata structs. This separation emphasize the different interfaces for HW clock and SW clock. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Refactor init clock functionEran Ben Elisha1-23/+53
Function mlx5_init_clock() is responsible for internal PTP related metadata initializations. Break mlx5_init_clock() to sub functions, each takes care of its own logic. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-23net/mlx5: remove unreachable returnPavel Machek (CIP)1-2/+0
The last return statement is unreachable code. I'm not sure if it will provoke any warnings, but it looks ugly. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-15net/mlx5: Don't call timecounter cyc2time directly from 1PPS flowEran Ben Elisha1-2/+3
Before calling timecounter_cyc2time(), clock->lock must be taken. Use mlx5_timecounter_cyc2time instead which guarantees a safe access. Fixes: afc98a0b46d8 ("net/mlx5: Update ptp_clock_event foreach PPS event") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
2020-09-15net/mlx5: Release clock lock before scheduling a PPS workEran Ben Elisha1-1/+1
Holding the clock lock is not required when scheduling a PPS work. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2020-09-15net/mlx5: Rename ptp clock infoEran Ben Elisha1-1/+1
Fix a typo in ptp_clock_info naming: mlx5_p2p -> mlx5_ptp. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
2020-09-15net/mlx5: Always use container_of to find mdev pointer from clock structEran Ben Elisha1-23/+29
Clock struct is part of struct mlx5_core_dev. Code was inconsistent, on some cases used container_of and on another used clock->mdev. Align code to use container_of amd remove clock->mdev pointer. While here, fix reverse xmas tree coding style. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2020-07-28net/mlx5: Query PPS pin operational status before registering itEran Ben Elisha1-1/+33
In a special configuration, a ConnectX6-Dx pin pps-out might be activated when driver is loaded. Fix the driver to always read the operational pin mode when registering it, and advertise it accordingly. Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Verify Hardware supports requested ptp function on a given pinEran Ben Elisha1-1/+22
Fix a bug where driver did not verify Hardware pin capabilities for PTP functions. Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Fix a bug of using ptp channel index as pin indexEran Ben Elisha1-11/+10
On PTP mlx5_ptp_enable(on=0) flow, driver mistakenly used channel index as pin index. After ptp patch marked in fixes tag was introduced, driver can freely call ptp_find_pin() as part of the .enable() callback. Fix driver mlx5_ptp_enable(on=0) flow to always use ptp_find_pin(). With that, Driver will use the correct pin index in mlx5_ptp_enable(on=0) flow. In addition, when initializing the pins, always set channel to zero. As all pins can be attached to all channels, let ptp_set_pinfunc() to move them between the channels. For stable branches, this fix to be applied only on kernels that includes both patches in fixes tag. Otherwise, mlx5_ptp_enable(on=0) will be stuck on pincfg_mux. Fixes: 62582a7ee783 ("ptp: Avoid deadlocks in the programmable pin code.") Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Move internal timer read function to clock libraryEran Ben Elisha1-0/+21
Move mlx5_read_internal_timer() into lib/clock.c file as it is being used there. As such, make this function a static one. In addition, rearrange headers include to support function move. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-15mlx5: Reject requests to enable time stamping on both edges.Richard Cochran1-0/+6
This driver enables rising edge or falling edge, but not both, and so this patch validates that the request contains only one of the two edges. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15ptp: Introduce strict checking of external time stamp options.Richard Cochran1-1/+2
User space may request time stamps on rising edges, falling edges, or both. However, the particular mode may or may not be supported in the hardware or in the driver. This patch adds a "strict" flag that tells drivers to ensure that the requested mode will be honored. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15mlx5: reject unsupported external timestamp flagsJacob Keller1-0/+6
Fix the mlx5 core PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. [ RC: I'm not 100% sure what this driver does, but if I'm not wrong it follows the dp83640: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge ] Cc: Feras Daoud <ferasda@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net: reject PTP periodic output requests with unsupported flagsJacob Keller1-0/+4
Commit 823eb2a3c4c7 ("PTP: add support for one-shot output") introduced a new flag for the PTP periodic output request ioctl. This flag is not currently supported by any driver. Fix all drivers which implement the periodic output request ioctl to explicitly reject any request with flags they do not understand. This ensures that the driver does not accidentally misinterpret the PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future. This is important for forward compatibility: if a new flag is introduced, the driver should reject requests to enable the flag until the driver has actually been modified to support the flag in question. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24RDMA/mlx5: Use get_zeroed_page() for clock_infoJason Gunthorpe1-19/+11
get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20mlx5: extend PTP gettime function to read system clockMiroslav Lichvar1-8/+12
Read the system time right before and immediately after reading the low register of the internal timer. This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20mlx5: update timecounter at least twice per counter overflowMiroslav Lichvar1-2/+2
The timecounter needs to be updated at least once in half of the cyclecounter interval to prevent timecounter_cyc2time() interpreting a new timestamp as an old value and causing a backward jump. This would be an issue if the timecounter multiplier was so small that the update interval would not be limited by the 64-bit overflow in multiplication. Shorten the calculated interval to make sure the timecounter is updated in time even when the system clock is slowed down by up to 10%, the multiplier is increased by up to 10%, and the scheduled overflow check is late by 15%. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ariel Levkovich <lariel@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-11-26net/mlx5: Clock, Use async events chainSaeed Mahameed1-7/+17
Remove the explicit call to mlx5_pps_event on MLX5_EVENT_TYPE_PPS_EVENT and let clock logic to register its own handler when its ready. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5e: Replace PTP clock lock from RW lock to seq lockShay Agroskin1-17/+17
Changed "priv.clock.lock" lock from 'rw_lock' to 'seq_lock' in order to improve packet rate performance. Tested on Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz. Sent 64b packets between two peers connected by ConnectX-5, and measured packet rate for the receiver in three modes: no time-stamping (base rate) time-stamping using rw_lock (old lock) for critical region time-stamping using seq_lock (new lock) for critical region Only the receiver time stamped its packets. The measured packet rate improvements are: Single flow (multiple TX rings to single RX ring): without timestamping: 4.26 (M packets)/sec with rw-lock (old lock): 4.1 (M packets)/sec with seq-lock (new lock): 4.16 (M packets)/sec 1.46% improvement Multiple flows (multiple TX rings to six RX rings): without timestamping: 22 (M packets)/sec with rw-lock (old lock): 11.7 (M packets)/sec with seq-lock (new lock): 21.3 (M packets)/sec 82.05% improvement The packet rate improvement is due to the lack of atomic operations for the 'readers' by the seq-lock. Since there are much more 'readers' than 'writers' contention on this lock, almost all atomic operations are saved. this results in a dramatic decrease in overall cache misses. Signed-off-by: Shay Agroskin <shayag@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-18net/mlx5: Adjust clock overflow work periodAriel Levkovich1-2/+10
When driver converts HW timestamp to wall clock time it subtracts the last saved cycle counter from the HW timestamp and converts the difference to nanoseconds. The conversion is done by multiplying the cycles difference with the clock multiplier value as a first step and therefore the cycles difference should be small enough so that the multiplication product doesn't exceed 64bit. The overflow handling routine is in charge of updating the last saved cycle counter in driver and it is called periodically using kernel delayed workqueue. The delay period for this work is calculated using the max HW cycle counter value (a 41 bit mask) as a base which doesn't take the 64bit limit into account so the delay period may be incorrect and too long to prevent a large difference between the HW counter and the last saved counter in SW. This change adjusts the work period for the HW clock overflow work by taking the minimum between the previous value and the quotient of max u64 value and the clock multiplier value. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-20net/mlx5e: Eliminate build warnings on no previous prototypeOr Gerlitz1-0/+1
Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5: [..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes] [..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes] [..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes] Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-30Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJason Gunthorpe1-1/+5
To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-18net/mlx5e: Add clock info page to mlx5 core devicesFeras Daoud1-0/+55
Adds a new page to mlx5 core containing clock info data that allows user level applications to translate between cqe timestamp to nanoseconds. The information stored into this page is represented through mlx5_ib_clock_info. In order to synchronize between kernel and user space a sequence number is incremented at the beginning and end of each update. An odd number means the data is being updated while an even means the access was already done. To guarantee that the data structure was accessed atomically user will: repeat: seq1 = <read sequence> goto <repeate> while odd <read data structure> seq2 = <read sequence> if seq1 != seq2 goto repeat Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-12net/mlx5: Update ptp_clock_event foreach PPS eventFeras Daoud1-1/+5
PPS event did not update ptp_clock_event fields, therefore, timestamp value was not updated correctly. This fix updates the event source and the timestamp value for each PPS event. Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-14net/mlx5: PTP code migration to driver core sectionFeras Daoud1-321/+227
PTP code is moved to core section of mlx5 driver in order to share it between ethernet and infiniband. This movement involves the following changes: - Change mlx5e_ prefix to be mlx5_ - Add clock structs to Core - Add clock object to mlx5_core_dev - Call Init/Uninit clock from core init/cleanup - Rename mlx5e_tstamp to be mlx5_clock Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-14net/mlx5: File renaming towards ptp core implementationFeras Daoud1-0/+619
en_clock.c renamed clock.c and moved to lib/ as first step towards relocating code to core part of the driver to allow sharing between Ethernet and Infiniband. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.