| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2019-12-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net |   David S. Miller | 5 | -14/+14 | |
| Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-22 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net |   Linus Torvalds | 1 | -6/+6 | |
| Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ... | |||||
| 2019-12-19 | nfp: tls: implement the stream sync RX resync |   Jakub Kicinski | 9 | -16/+172 | |
| The simple RX resync strategy controlled by the kernel does not guarantee as good results as if the device helps by detecting the potential record boundaries and keeping track of them. We've called this strategy stream scan in the tls-offload doc. Implement this strategy for the NFP. The device sends a request for record boundary confirmation, which is then recorded in per-TLS socket state and responded to once record is reached. Because the device keeps track of records passing after the request was sent the response is not as latency sensitive as when kernel just tries to tell the device the information about the next record. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: pass packet pointer to nfp_net_parse_meta() | Jakub Kicinski | 1 | -10/+8 | |
| Make nfp_net_parse_meta() take a packet pointer and return a drop/no drop decision. Right now it returns the end of metadata and caller compares it to the packet pointer. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: update flow merge code to support IPv6 tunnels |   John Hurley | 1 | -5/+23 | |
| Both pre-tunnel match rules and flow merge functions parse compiled match/action fields for validation. Update these validation functions to include IPv6 match and action fields. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: support ipv6 tunnel keep-alive messages from fw | John Hurley | 4 | -0/+67 | |
| FW sends an update of IPv6 tunnels that are active in a given period. Use this information to update the kernel table so that neighbour entries do not time out when active on the NIC. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: handle notifiers for ipv6 route changes | John Hurley | 2 | -68/+181 | |
| A notifier is used to track route changes in the kernel. If a change is made to a route that is offloaded to fw then an update is sent to the NIC. The driver tracks all routes that are offloaded to determine if a kernel change is of interest. Extend the notifier to track IPv6 route changes and create a new list that stores offloaded IPv6 routes. Modify the IPv4 route helper functions to accept varying address lengths. This way, the same core functions can be used to handle IPv4 and IPv6. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: handle ipv6 tunnel no neigh request | John Hurley | 4 | -8/+116 | |
| When fw does not know the next hop for an IPv6 tunnel, it sends a request to the driver. Handle this request by doing a route lookup on the IPv6 address and offloading the next hop to the fw neighbour table. Similar functions already exist to handle IPv4 no neighbour requests. To avoid confusion, append these functions with the _ipv4 tag. There is no change in functionality with this. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: modify pre-tunnel and set tunnel action for ipv6 | John Hurley | 3 | -30/+62 | |
| The IPv4 set tunnel action allows the setting of tunnel metadata such as the TTL and ToS values. The pre-tunnel action includes the destination IP address and is used to calculate the next hop from from the neighbour table. Much of the IPv4 tunnel actions can be reused for IPv6 tunnels. Change the names of associated functions and structs to remove the IPv4 identifier and make minor modifcations to support IPv6 tunnel actions. Ensure the pre-tunnel action contains the IPv6 address along with an identifying flag when an IPv6 tunnel action is required. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: offload list of IPv6 tunnel endpoint addresses | John Hurley | 5 | -1/+141 | |
| Fw requires a list of IPv6 addresses that are used as tunnel endpoints to enable correct decap of tunneled packets. Store a list of IPv6 endpoints used in rules with a ref counter to track how many times it is in use. Offload the entire list any time a new IPv6 address is added or when an address is removed (ref count is 0). Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: compile match for IPv6 tunnels | John Hurley | 4 | -51/+246 | |
| IPv6 tunnel matches are now supported by firmware. Modify the NFP driver to compile these match rules. IPv6 matches are handled similar to IPv4 tunnels with the difference the address length. The type of tunnel is indicated by the same bitmap that is used in IPv4 with an extra bit signifying that the IPv6 variation should be used. Only compile IPv6 tunnel matches when the fw features symbol indicated that they are compatible with the currently loaded fw. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: move udp tunnel key match compilation to helper function | John Hurley | 1 | -22/+35 | |
| IPv4 UDP and GRE tunnel match rule compile helpers share functions for compiling fields such as IP addresses. However, they handle fields such tunnel IDs differently. Create new helper functions for compiling GRE and UDP tunnel key data. This is in preparation for supporting IPv6 tunnels where these new functions can be reused. This patch does not change functionality. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-19 | nfp: flower: pass flow rule pointer directly to match functions | John Hurley | 1 | -49/+27 | |
| In kernel 5.1, the flow offload API was introduced along with a helper function to extract the flow_rule from the TC offload struct. Each of the match helper functions are passed the offload struct and extract the flow rule to a local variable. Simplify the code while also removing the extra compat and local variable calls by extracting the rule once in the main match handler, and passing a reference to the rule direct to each helper. This patch does not change driver functionality. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-17 | nfp: flower: fix stats id allocation | John Hurley | 1 | -6/+6 | |
| As flower rules are added, they are given a stats ID based on the number of rules that can be supported in firmware. Only after the initial allocation of all available IDs does the driver begin to reuse those that have been released. The initial allocation of IDs was modified to account for multiple memory units on the offloaded device. However, this introduced a bug whereby the counter that controls the IDs could be decremented before the ID was assigned (where it is further decremented). This means that the stats ID could be assigned as -1/0xfffffff which is out of range. Fix this by only decrementing the main counter after the current ID has been assigned. Fixes: 467322e2627f ("nfp: flower: support multiple memory units for filter offloads") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-13 | Revert "nfp: abm: fix memory leak in nfp_abm_u32_knode_replace" | Jakub Kicinski | 1 | -10/+4 | |
| This reverts commit 78beef629fd9 ("nfp: abm: fix memory leak in nfp_abm_u32_knode_replace"). The quoted commit does not fix anything and resulted in a bogus CVE-2019-19076. If match is NULL then it is known there is no matching entry in list, hence, calling nfp_abm_u32_knode_delete() is pointless. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> | |||||
| 2019-12-12 | netronome: use the new txqueue timeout argument |   Michael S. Tsirkin | 1 | -7/+1 | |
| Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 1 | -1/+1 | |
| This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | nfp: add support for TLV device stats | Jakub Kicinski | 3 | -7/+126 | |
| Device stats are currently hard coded in the PCI BAR0 layout. Add a ability to read them from the TLV area instead. Names for the stats are maintained by the driver, and their meaning documented. This allows us to more easily add and remove device stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | treewide: Use sizeof_field() macro |   Pankaj Bharadiya | 4 | -8/+8 | |
| Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net | |||||
| 2019-11-23 | net: use rhashtable_lookup() instead of rhashtable_lookup_fast() |   Taehee Yoo | 1 | -2/+2 | |
| rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-11-18 | bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails |   Andrii Nakryiko | 1 | -3/+1 | |
| 92117d8443bc ("bpf: fix refcnt overflow") turned refcounting of bpf_map into potentially failing operation, when refcount reaches BPF_MAX_REFCNT limit (32k). Due to using 32-bit counter, it's possible in practice to overflow refcounter and make it wrap around to 0, causing erroneous map free, while there are still references to it, causing use-after-free problems. But having a failing refcounting operations are problematic in some cases. One example is mmap() interface. After establishing initial memory-mapping, user is allowed to arbitrarily map/remap/unmap parts of mapped memory, arbitrarily splitting it into multiple non-contiguous regions. All this happening without any control from the users of mmap subsystem. Rather mmap subsystem sends notifications to original creator of memory mapping through open/close callbacks, which are optionally specified during initial memory mapping creation. These callbacks are used to maintain accurate refcount for bpf_map (see next patch in this series). The problem is that open() callback is not supposed to fail, because memory-mapped resource is set up and properly referenced. This is posing a problem for using memory-mapping with BPF maps. One solution to this is to maintain separate refcount for just memory-mappings and do single bpf_map_inc/bpf_map_put when it goes from/to zero, respectively. There are similar use cases in current work on tcp-bpf, necessitating extra counter as well. This seems like a rather unfortunate and ugly solution that doesn't scale well to various new use cases. Another approach to solve this is to use non-failing refcount_t type, which uses 32-bit counter internally, but, once reaching overflow state at UINT_MAX, stays there. This utlimately causes memory leak, but prevents use after free. But given refcounting is not the most performance-critical operation with BPF maps (it's not used from running BPF program code), we can also just switch to 64-bit counter that can't overflow in practice, potentially disadvantaging 32-bit platforms a tiny bit. This simplifies semantics and allows above described scenarios to not worry about failing refcount increment operation. In terms of struct bpf_map size, we are still good and use the same amount of space: BEFORE (3 cache lines, 8 bytes of padding at the end): struct bpf_map { const struct bpf_map_ops * ops __attribute__((__aligned__(64))); /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ int spin_lock_off; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ u32 btf_key_type_id; /* 56 4 */ u32 btf_value_type_id; /* 60 4 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct btf * btf; /* 64 8 */ struct bpf_map_memory memory; /* 72 16 */ bool unpriv_array; /* 88 1 */ bool frozen; /* 89 1 */ /* XXX 38 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ atomic_t refcnt __attribute__((__aligned__(64))); /* 128 4 */ atomic_t usercnt; /* 132 4 */ struct work_struct work; /* 136 32 */ char name[16]; /* 168 16 */ /* size: 192, cachelines: 3, members: 21 */ /* sum members: 146, holes: 1, sum holes: 38 */ /* padding: 8 */ /* forced alignments: 2, forced holes: 1, sum forced holes: 38 */ } __attribute__((__aligned__(64))); AFTER (same 3 cache lines, no extra padding now): struct bpf_map { const struct bpf_map_ops * ops __attribute__((__aligned__(64))); /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ int spin_lock_off; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ u32 btf_key_type_id; /* 56 4 */ u32 btf_value_type_id; /* 60 4 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct btf * btf; /* 64 8 */ struct bpf_map_memory memory; /* 72 16 */ bool unpriv_array; /* 88 1 */ bool frozen; /* 89 1 */ /* XXX 38 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ atomic64_t refcnt __attribute__((__aligned__(64))); /* 128 8 */ atomic64_t usercnt; /* 136 8 */ struct work_struct work; /* 144 32 */ char name[16]; /* 176 16 */ /* size: 192, cachelines: 3, members: 21 */ /* sum members: 154, holes: 1, sum holes: 38 */ /* forced alignments: 2, forced holes: 1, sum forced holes: 38 */ } __attribute__((__aligned__(64))); This patch, while modifying all users of bpf_map_inc, also cleans up its interface to match bpf_map_put with separate operations for bpf_map_inc and bpf_map_inc_with_uref (to match bpf_map_put and bpf_map_put_with_uref, respectively). Also, given there are no users of bpf_map_inc_not_zero specifying uref=true, remove uref flag and default to uref=false internally. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191117172806.2195367-2-andriin@fb.com | |||||
| 2019-11-02 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -18/+0 | |
| The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-10-24 | net: core: add generic lockdep keys | Taehee Yoo | 1 | -18/+0 | |
| Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-10-08 | nfp: bpf: make array exp_mask static, makes object smaller |   Colin Ian King | 1 | -1/+1 | |
| Don't populate the array exp_mask on the stack but instead make it static. Makes the object code smaller by 224 bytes. Before: text data bss dec hex filename 77832 2290 0 80122 138fa ethernet/netronome/nfp/bpf/jit.o After: text data bss dec hex filename 77544 2354 0 79898 1381a ethernet/netronome/nfp/bpf/jit.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-10-05 | net/tls: add tracing for device/offload events | Jakub Kicinski | 1 | -1/+2 | |
| Add tracing of device-related interaction to aid performance analysis, especially around resync: tls:tls_device_offload_set tls:tls_device_rx_resync_send tls:tls_device_rx_resync_nh_schedule tls:tls_device_rx_resync_nh_delay tls:tls_device_tx_resync_req tls:tls_device_tx_resync_send Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-28 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | Linus Torvalds | 2 | -4/+17 | |
| Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ... | |||||
| 2019-09-27 | nfp: abm: fix memory leak in nfp_abm_u32_knode_replace |   Navid Emamdoost | 1 | -4/+10 | |
| In nfp_abm_u32_knode_replace if the allocation for match fails it should go to the error handling instead of returning. Updated other gotos to have correct errno returned, too. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-27 | nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs | Navid Emamdoost | 1 | -0/+3 | |
| In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-27 | nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs | Navid Emamdoost | 1 | -0/+4 | |
| In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-20 | Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild | Linus Torvalds | 5 | -10/+0 | |
| Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ... | |||||
| 2019-09-15 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -5/+5 | |
| Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-12 | nfp: read chip model from the PluDevice register |   Dirk van der Merwe | 1 | -10/+6 | |
| The PluDevice register provides the authoritative chip model/revision. Since the model number is purely used for reporting purposes, follow the hardware team convention of subtracting 0x10 from the PluDevice register to obtain the chip model/revision number. Suggested-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-11 | nfp: devlink: set unknown fw_load_policy | Dirk van der Merwe | 1 | -1/+2 | |
| If the 'app_fw_from_flash' HWinfo key is invalid, set the 'fw_load_policy' devlink parameter value to unknown. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | kdoc: fix nfp_fw_load documentation | Dirk van der Merwe | 1 | -1/+1 | |
| Fixed the incorrect prefix for the 'nfp_fw_load' function. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: devlink: add 'reset_dev_on_drv_probe' support | Dirk van der Merwe | 1 | -0/+29 | |
| Add support for the 'reset_dev_on_drv_probe' devlink parameter. The reset control policy is controlled by the 'abi_drv_reset' hwinfo key. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: devlink: add 'fw_load_policy' support | Dirk van der Merwe | 1 | -0/+165 | |
| Add support for the 'fw_load_policy' devlink parameter. The FW load policy is controlled by the 'app_fw_from_flash' hwinfo key. Remap the values from devlink to the hwinfo key and back. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: add devlink param infrastructure | Dirk van der Merwe | 4 | -0/+71 | |
| Register devlink parameters for driver use. Subsequent patches will add support for specific parameters. In order to support devlink parameters, the management firmware needs to be able to lookup and set hwinfo keys. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: honor FW reset and loading policies | Dirk van der Merwe | 3 | -25/+132 | |
| The firmware reset and loading policies can be controlled with the combination of three hwinfo keys, 'abi_drv_reset', 'abi_drv_load_ifc' and 'app_fw_from_flash'. 'app_fw_from_flash' defines which firmware should take precedence, 'Disk', 'Flash' or the 'Preferred' firmware. When 'Preferred' is selected, the management firmware makes the decision on which firmware will be loaded by comparing versions of the flash firmware and the host supplied firmware. 'abi_drv_reset' defines when the driver should reset the firmware when the driver is probed, either 'Disk' if firmware was found on disk, 'Always' reset or 'Never' reset. Note that the device is always reset on driver unload if firmware was loaded when the driver was probed. 'abi_drv_load_ifc' defines a list of PF devices allowed to load FW on the device. Furthermore, we limit the cases to where the driver will unload firmware again when the driver is removed to only when firmware was loaded by the driver and only if this particular device was the only one that could have loaded firmware. This is needed to avoid firmware being removed while in use on multi-host platforms. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: nsp: add support for hwinfo set operation | Dirk van der Merwe | 2 | -0/+21 | |
| Add support for the NSP HWinfo set command. This closely follows the HWinfo lookup command. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: nsp: add support for optional hwinfo lookup | Dirk van der Merwe | 2 | -4/+50 | |
| There are cases where we want to read a hwinfo entry from the NFP, and if it doesn't exist, use a default value instead. To support this, we must silence warning/error messages when the hwinfo entry doesn't exist since this is a valid use case. The NSP command structure provides the ability to silence command errors, in which case the caller should log any command errors appropriately. Protocol errors are unaffected by this. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-10 | nfp: nsp: add support for fw_loaded command | Dirk van der Merwe | 2 | -0/+16 | |
| Add support for the simple command that indicates whether application firmware is loaded. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-07 | nfp: flower: cmsg rtnl locks can timeout reify messages |   Fred Lotter | 1 | -5/+5 | |
| Flower control message replies are handled in different locations. The truly high priority replies are handled in the BH (tasklet) context, while the remaining replies are handled in a predefined Linux work queue. The work queue handler orders replies into high and low priority groups, and always start servicing the high priority replies within the received batch first. Reply Type: Rtnl Lock: Handler: CMSG_TYPE_PORT_MOD no BH tasklet (mtu) CMSG_TYPE_TUN_NEIGH no BH tasklet CMSG_TYPE_FLOW_STATS no BH tasklet CMSG_TYPE_PORT_REIFY no WQ high CMSG_TYPE_PORT_MOD yes WQ high (link/mtu) CMSG_TYPE_MERGE_HINT yes WQ low CMSG_TYPE_NO_NEIGH no WQ low CMSG_TYPE_ACTIVE_TUNS no WQ low CMSG_TYPE_QOS_STATS no WQ low CMSG_TYPE_LAG_CONFIG no WQ low A subset of control messages can block waiting for an rtnl lock (from both work queue priority groups). The rtnl lock is heavily contended for by external processes such as systemd-udevd, systemd-network and libvirtd, especially during netdev creation, such as when flower VFs and representors are instantiated. Kernel netlink instrumentation shows that external processes (such as systemd-udevd) often use successive rtnl_trylock() sequences, which can result in an rtnl_lock() blocked control message to starve for longer periods of time during rtnl lock contention, i.e. netdev creation. In the current design a single blocked control message will block the entire work queue (both priorities), and introduce a latency which is nondeterministic and dependent on system wide rtnl lock usage. In some extreme cases, one blocked control message at exactly the wrong time, just before the maximum number of VFs are instantiated, can block the work queue for long enough to prevent VF representor REIFY replies from getting handled in time for the 40ms timeout. The firmware will deliver the total maximum number of REIFY message replies in around 300us. Only REIFY and MTU update messages require replies within a timeout period (of 40ms). The MTU-only updates are already done directly in the BH (tasklet) handler. Move the REIFY handler down into the BH (tasklet) in order to resolve timeouts caused by a blocked work queue waiting on rtnl locks. Signed-off-by: Fred Lotter <frederik.lotter@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-06 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next | David S. Miller | 7 | -20/+239 | |
| Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-06 | nfp: Drop unnecessary continue in nfp_net_pf_alloc_vnics |   zhong jiang | 1 | -3/+1 | |
| Continue is not needed at the bottom of a loop. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-09-02 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 3 | -11/+21 | |
| r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-08-30 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf | David S. Miller | 1 | -4/+13 | |
| Daniel Borkmann says: ==================== pull-request: bpf 2019-08-31 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix 32-bit zero-extension during constant blinding which has been causing a regression on ppc64, from Naveen. 2) Fix a latency bug in nfp driver when updating stack index register, from Jiong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-08-31 | nfp: bpf: add simple map op cache | Jakub Kicinski | 5 | -9/+215 | |
| Each get_next and lookup call requires a round trip to the device. However, the device is capable of giving us a few entries back, instead of just one. In this patch we ask for a small yet reasonable number of entries (4) on every get_next call, and on subsequent get_next/lookup calls check this little cache for a hit. The cache is only kept for 250us, and is invalidated on every operation which may modify the map (e.g. delete or update call). Note that operations may be performed simultaneously, so we have to keep track of operations in flight. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | |||||
| 2019-08-31 | nfp: bpf: rework MTU checking | Jakub Kicinski | 5 | -12/+25 | |
| If control channel MTU is too low to support map operations a warning will be printed. This is not enough, we want to make sure probe fails in such scenario, as this would clearly be a faulty configuration. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> | |||||
| 2019-08-28 | nfp: flower: handle neighbour events on internal ports | John Hurley | 1 | -4/+4 | |
| Recent code changes to NFP allowed the offload of neighbour entries to FW when the next hop device was an internal port. This allows for offload of tunnel encap when the end-point IP address is applied to such a port. Unfortunately, the neighbour event handler still rejects events that are not associated with a repr dev and so the firmware neighbour table may get out of sync for internal ports. Fix this by allowing internal port neighbour events to be correctly processed. Fixes: 45756dfedab5 ("nfp: flower: allow tunnels to output to internal port") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-08-28 | nfp: flower: prevent ingress block binds on internal ports | John Hurley | 1 | -3/+4 | |
| Internal port TC offload is implemented through user-space applications (such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect block offload support in the NFP driver accepts both ingress qdisc binds and egress binds if the device is an internal port. However, clsact sends bind notification for both ingress and egress block binds which can lead to the driver registering multiple callbacks and receiving multiple notifications of new filters. Fix this by rejecting ingress block bind callbacks when the port is internal and only adding filter callbacks for egress binds. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
 |
index : linux-dev | |
| Linux kernel development work - see feature branches | Jason A. Donenfeld |
| aboutsummaryrefslogtreecommitdiffstats |