aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/netronome (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-21nfp: only clean `sp_indiff` when application firmware is unloadedYinjun Zhang1-23/+15
Currently `sp_indiff` is cleaned when driver is removed. This will cause problem in multi-PF/multi-host case, considering one PF is removed while another is still in use. Since `sp_indiff` is the application firmware property, it should only be cleaned when the firmware is unloaded. Now let management firmware to clean it when necessary, driver only set it. Fixes: b1e4f11e426d ("nfp: refine the ABI of getting `sp_indiff` info") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20221020081411.80186-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10nfp: flower: fix incorrect struct type in GRE key_sizeLouis Peens1-2/+2
Looks like a copy-paste error sneaked in here at some point, causing the key_size for these tunnels to be calculated incorrectly. This size ends up being send to the firmware, causing unexpected behaviour in some cases. Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels") Reported-by: Chaoyong He <chaoyong.he@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20221007092132.218386-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30nfp: add support restart of link auto-negotiationFei Qin1-0/+33
Add support restart of link auto-negotiation. This may be initiated using: # ethtool -r <intf> Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30nfp: add support for link auto negotiationYinjun Zhang4-5/+33
Report the auto negotiation capability if it's supported in management firmware, and advertise it if it's enabled. Changing port speed is not allowed when autoneg is enabled. The ethtool <intf> command displays the auto-neg capability: # ethtool enp1s0np0 Settings for enp1s0np0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: None RS BASER Advertised link modes: Not reported Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: None RS BASER Speed: 25000Mb/s Duplex: Full Auto-negotiation: on Port: FIBRE PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30nfp: refine the ABI of getting `sp_indiff` infoYinjun Zhang5-65/+71
Considering that whether application firmware is indifferent to port speed is a firmware property instead of port property, now use a new rtsym to get the property instead of parsing per-port tlv caps. With this change, relevant code is moved to `nfp_main` layer. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30nfp: avoid halt of driver init process when non-fatal error happensYinjun Zhang1-5/+4
It's not a fatal error when setting `hwinfo` into management firmware fails, no need to halt the whole driver initialization process. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30nfp: add support for reporting active FEC modeYinjun Zhang3-2/+11
The latest management firmware can now report the active FEC mode. Adapt driver accordingly so that user can get the active FEC mode by running command: # ethtool --show-fec <intf> Also correct use of `fec` field. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29nfp: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-1/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Link: https://lore.kernel.org/r/20220927141835.19221-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-3/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20nfp: flower: support vlan action in pre_ctHui Zhou1-1/+48
Support hardware offload of rule which has both vlan push/pop/mangle and ct action. Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20nfp: flower: support hw offload for ct nat actionHui Zhou2-7/+192
support ct nat action when pre_ct merge with post_ct and nft. at the same time, add the extra checksum action and hardware stats for nft to meet the action check when do nat. Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20nfp: flower: add validation of for police actions which are independent of flowsZiyang Chen1-8/+23
Validation of police actions was added to offload drivers in commit d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") This patch extends that validation in the nfp driver to include police actions which are created independently of flows. Signed-off-by: Ziyang Chen <ziyang.chen@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20tcp: Access &tcp_hashinfo via net.Kuniyuki Iwashima1-2/+3
We will soon introduce an optional per-netns ehash. This means we cannot use tcp_hashinfo directly in most places. Instead, access it via net->ipv4.tcp_death_row.hashinfo. The access will be valid only while initialising tcp_hashinfo itself and creating/destroying each netns. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-10/+12
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30nfp: fix the access to management firmware hangingGao Xiao1-0/+1
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <gao.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220829101651.633840-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30nfp: add support for eeprom get and set commandBaowen Zheng1-0/+157
Add support for eeprom get and set operation with ethtool command. with this change, we can support commands as: #ethtool -e enp101s0np0 offset 0 length 6 Offset Values ------ ------ 0x0000: 00 15 4d 16 66 33 #ethtool -E enp101s0np0 magic 0x400019ee offset 5 length 1 value 0x88 We make this change to persist MAC change during driver reload and system reboot. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30nfp: check if application firmware is indifferent to port speedYinjun Zhang4-1/+59
A new tlv type is introduced to indicate if application firmware is indifferent to port speed, and inform management firmware of the result. And the result is always true for flower application firmware since it's indifferent to port speed from the start and will never change. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30nfp: propagate port speed from management firmwareYinjun Zhang6-24/+79
In future releases the NIC application firmware may be indifferent to port speeds - not built for specific port speeds - and consequently it will not be able to report VF port speeds to the driver without first learning them. With this change, the driver will pass the speed of physical ports from management firmware to application firmware, and the latter will copy the speed of port 0 to all the active VFs. So that the driver can get VF port speed as before. The port speed of a VF may be requested from userspace using: ethtool <vf-intf> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior2-8/+8
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26nfp: flower: fix ingress police using matchall filterTianyu Yuan1-2/+3
Referenced commit introduced nfp_policer_validate in the progress installing rate limiter. This validate check the action id and will reject police with CONTINUE, which is required to support ingress police offload. Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action id in nfp_policer_validate Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220825080845.507534-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25nfp: flower: support case of match on ct_state(0/0x3f)Wenjuan Geng1-2/+7
is_post_ct_flow() function will process only ct_state ESTABLISHED, then offload_pre_check() function will check FLOW_DISSECTOR_KEY_CT flag. When config tc filter match ct_state(0/0x3f), dissector->used_keys with FLOW_DISSECTOR_KEY_CT bit, function offload_pre_check() will return false, so not offload. This is a special case that can be handled safely. Therefore, modify to let initial packet which won't go through conntrack can be offloaded, as long as the cared ct fields are all zero. Signed-off-by: Wenjuan Geng <wenjuan.geng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220823090122.403631-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-11nfp: fix use-after-free in area_cache_get()Jialiang Wang1-1/+2
area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire(). But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free. To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully. Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration. BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1 Call Trace: <TASK> nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884) Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744) Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48) Signed-off-by: Jialiang Wang <wangjialiang0806@163.com> Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-03nfp: ethtool: fix the display error of `ethtool -m DEVNAME`Yu Xiao1-0/+2
The port flag isn't set to `NFP_PORT_CHANGED` when using `ethtool -m DEVNAME` before, so the port state (e.g. interface) cannot be updated. Therefore, it caused that `ethtool -m DEVNAME` sometimes cannot read the correct information. E.g. `ethtool -m DEVNAME` cannot work when load driver before plug in optical module, as the port interface is still NONE without port update. Now update the port state before sending info to NIC to ensure that port interface is correct (latest state). Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM") Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01nfp: flower: add support for tunnel offload without key IDBaowen Zheng1-7/+8
Currently nfp driver will reject to offload tunnel key action without tunnel key ID which means tunnel ID is 0. But it is a normal case for tc flower since user can setup a tunnel with tunnel ID is 0. So we need to support this case to accept tunnel key action without tunnel key ID. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220729091641.354748-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25nfp: bpf: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15ip: Fix data-races around sysctl_ip_default_ttl.Kuniyuki Iwashima1-1/+1
While reading sysctl_ip_default_ttl, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-13/+38
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14nfp: flower: configure tunnel neighbour on cmsg rxTianyu Yuan1-5/+13
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956c11f ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12nfp: support TX VLAN ctag insert in NFDKDiana Wang3-31/+35
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. This features is currently implemented only for NFD3 and this patch adds support for it with NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220711093048.1911698-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12nfp: fix clang -Wformat warningsJustin Stitt2-2/+2
When building with Clang we encounter these warnings: | drivers/net/ethernet/netronome/nfp/nfp_app.c:233:99: error: format | specifies type 'unsigned char' but the argument has underlying type | 'unsigned int' [-Werror,-Wformat] nfp_err(pf->cpp, "unknown FW app ID | 0x%02hhx, driver too old or support for FW not built in\n", id); - | drivers/net/ethernet/netronome/nfp/nfp_main.c:396:11: error: format | specifies type 'unsigned char' but the argument has type 'int' | [-Werror,-Wformat] serial, interface >> 8, interface & 0xff); Correct format specifier for `id` is `%x` since the default type for the `nfp_app_id` enum is `unsigned int`. The second warning is also solved by using the `%x` format specifier as the expressions involving `interface` are implicity promoted to integers (%x is used to maintain hexadecimal representation). Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220712000152.2292031-1-justinstitt@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-09nfp: fix issue of skb segments exceeds descriptor limitationBaowen Zheng1-8/+25
TCP packets will be dropped if the segments number in the tx skb exceeds limitation when sending iperf3 traffic with --zerocopy option. we make the following changes: Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from outside because it will be changed after skb_linearize operation. Fill maximum dma_len in first tx descriptor to make sure the whole head is included in the first descriptor. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06nfp: enable TSO by default for nfp netdevSimon Horman2-7/+5
We can benefit from TSO when the host CPU is not powerful enough, so enable it by default now. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06nfp: allow TSO packets with metadata prepended in NFDK pathYinjun Zhang1-17/+0
Packets with metadata prepended can be correctly handled in firmware when TSO is enabled, now remove the error path and related comments. Since there's no existing firmware that uses prepended metadata, no need to add compatibility check here. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support TX VLAN ctag insertDiana Wang5-19/+45
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata are gotten from sk_buff, including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The metadata format on tx side of NFD3 is different from NFDK. This feature is not currently implemented for NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support RX VLAN ctag/stag stripDiana Wang11-22/+143
Add support for RX VLAN ctag/stag strip which may be configured via ethtool. e.g. # ethtool -K $DEV rx-vlan-offload on # ethtool -K $DEV rx-vlan-stag-hw-parse on Ctag-stripped and stag-stripped cannot be enabled at the same time because currently the kernel supports only one layer of VLAN stripping. The NIC supplies VLAN strip information as packet metadata. The fields of this VLAN metadata are: * strip flag: 1 for stripped; 0 for unstripped * tci: VLAN TCI ID * tpid: 1 for ETH_P_8021AD; 0 for ETH_P_8021Q Configuration control bits NFP_NET_CFG_CTRL_RXVLAN_V2 and NFP_NET_CFG_CTRL_RXQINQ are to signal availability of ctag-strip and stag-strip features of the firmware. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet3-10/+7
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01nfp: support VF rate limit with NFDKBin Chen1-0/+1
Support VF rate limiting with NFDK by adding ndo_set_vf_rate to the NFDK ops structure. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The VF rate limit feature is already supported by the driver for NFD3. Signed-off-by: Bin Chen <bin.chen@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29nfp: flower: fix comment typos and formattingWalter Heymans7-17/+17
A number of spelling and language mistakes in the flower section are fixed. The spacing between the text inside some comments and the comment symbols are also updated for consistency. Signed-off-by: Walter Heymans <walter.heymans@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-27nfp: add support for 'ethtool -t DEVNAME' commandFei Qin1-0/+167
Add support for ethtool selftest. e.g. # ethtool -t DEVNAME test result like: The test result is PASS The test extra info: Link Test 0 NSP Test 0 Firmware Test 0 Register Test 0 Signed-off-by: Fei Qin <fei.qin@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27nfp: support vepa mode in HW bridgeYinjun Zhang4-2/+73
Add support for VEPA mode of HW bridge. The default remains VEB mode. The mode may be configured using ndo_bridge_setlink, and inspected using ndo_bridge_getlink. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23nfp: add 'ethtool --identify' supportSixiang Chen3-0/+66
Add support for ethtool -p|--identify by enabling blinking of the panel LED if supported by the NIC firmware. Signed-off-by: Sixiang Chen <sixiang.chen@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220622083938.291548-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-21nfp: compose firmware file name with new hwinfo "nffw.partno"Yu Xiao1-1/+3
During initialization of the NFP driver, a file name for loading application firmware is composed using the NIC's AMDA information and port type (count and speed). E.g.: "nic_AMDA0145-1012_2x10.nffw". In practice there may be many variants for each NIC type, and many of the variants relate to assembly components which do not concern the driver and application firmware implementation. Yet the current scheme leads to a different application firmware file name for each variant, because they have different AMDA information. To reduce proliferation of content-duplicated application firmware images or symlinks, the NIC's management firmware will only expose differences between variants that need different application firmware via a newly introduced hwinfo, "nffw.partno". Use of the existing hwinfo, "assembly.partno", is maintained in order to support for NICs with management firmware that does not expose "nffw.partno". Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220620103912.46164-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-19Revert "nfp: update nfp_X logging definitions"Simon Horman1-20/+6
This reverts commit 9386ebccfc59 ("nfp: update nfp_X logging definitions") The reverted patch was intended to improve logging for the NFP driver by including information such as the source code file and number in log messages. Unfortunately our experience is that this has not improved things as we had hoped. The resulting logs are inconsistent with (most) other kernel log messages. And rely on knowledge of the source code version in order for the extra information to be useful. Thus, revert the change. We acknowledge that Jakub Kicinski <kuba@kernel.org> foresaw this problem. Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17nfp: add support for .get_pauseparam()Yinjun Zhang1-0/+19
Show correct pause frame parameters for nfp. These parameters cannot be configured, so .set_pauseparam() is not implemented. With this change: #ethtool --show-pause enp1s0np0 Pause parameters for enp1s0np0: Autonegotiate: off RX: on TX: on Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220616133358.135305-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13nfp: support 48-bit DMA addressing for NFP3800Yinjun Zhang10-33/+52
48-bit DMA addressing is supported in NFP3800 HW and implemented in NFDK firmware, so enable this feature in driver now. Note that with this change, NFD3 firmware, which doesn't implement 48-bit DMA, cannot be used for NFP3800 any more. RX free list descriptor, used by both NFD3 and NFDK, is also modified to support 48-bit DMA. That's OK because the top bits is always get set to 0 when assigned with 40-bit address. Based on initial work of Jakub Kicinski <jakub.kicinski@netronome.com>. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-10nfp: flower: support to offload pedit of IPv6 flowinto fieldsYinjun Zhang2-5/+3
Previously the traffic class field is ignored while firmware has already supported to pedit flowinfo fields, including traffic class and flow label, now add it back. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Link: https://lore.kernel.org/r/20220609080136.151830-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-37/+39
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.