aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/tx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-05sfc: complete the next packet when we receive a timestampTom Zhao1-0/+38
We now ignore the "completion" event when using tx queue timestamping, and only pay attention to the two (high and low) timestamp events. The NIC will send a pair of timestamp events for every packet transmitted. The current firmware may merge the completion events, and it is possible that future versions may reorder the completion and timestamp events. As such the completion event is not useful. Without this patch in place a merged completion event on a queue with timestamping will cause a "spurious TX completion" error. This affects SFN8000-series adapters. Signed-off-by: Tom Zhao <tzhao@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move a couple more functionsAlex Maftei (amaftei)1-18/+0
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move more tx codeAlex Maftei (amaftei)1-77/+0
The code that handles transmission finalization will also be common. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08net: sfc: use skb_list_walk_safe helper for gso segmentsJason A. Donenfeld1-5/+2
This is a straight-forward conversion case for the new function, and while we're at it, we can remove a null write to skb->next by replacing it with skb_mark_not_on_list. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08sfc: move common tx codeAlex Maftei (amaftei)1-295/+0
Once again, a tiny bit of refactoring was required to stitch the code together (i.e. adding headers). The moved code deals with managing tx queues and mappings. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08sfc: add new headers in preparation for code splitAlex Maftei (amaftei)1-9/+10
New headers contain prototypes of functions that will be common between ef10 and upcoming driver. Removed static modifier from the affected functions. Some function prototypes were removed from existing headers. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31sfc: handle XDP_TX outcomes of XDP eBPF programsCharles McLachlan1-0/+88
Provide an ndo_xdp_xmit function that uses the XDP tx queue for this CPU to send the packet. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31sfc: allocate channels for XDP tx queuesCharles McLachlan1-0/+2
Each CPU needs access to its own queue to allow uncontested transmission of XDP_TX packets. This means we need to allocate (up front) enough channels ("xdp transmit channels") to provide at least one extra tx queue per CPU. These tx queues should not do TSO. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31sfc: support encapsulation of xdp_frames in efx_tx_bufferCharles McLachlan1-0/+2
Add a field to efx_tx_buffer so that we can track xdp_frames. Add a flag so that buffers that contain xdp_frames can be identified and passed to xdp_return_frame. Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+1
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01drivers: net: sfc: use netdev_xmit_more helperFlorian Westphal1-7/+5
skb->xmit_more hint is now always 0, this switches the sfc driver to use the netdev_xmit_more helper instead. Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14sfc: Replace dev_kfree_skb_any by dev_consume_skb_anyHuang Zijiang1-1/+1
The skb should be freed by dev_consume_skb_any() in efx_tx_tso_fallback() when skb is still used. The skb will be replaced by segments, so the original skb should be consumed(not drop). Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08sfc: use the new __netdev_tx_sent_queue BQL optimisationEdward Cree1-4/+1
As added in 3e59020abf0f ("net: bql: add __netdev_tx_sent_queue()"), which see for performance rationale. Signed-off-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25sfc: stop the TX queue before pushing new buffersMartin Habets1-8/+25
efx_enqueue_skb() can push new buffers for the xmit_more functionality. We must stops the TX queue before this or else the TX queue does not get restarted and we get a netdev watchdog. In the error handling we may now need to unwind more than 1 packet, and we may need to push the new buffers onto the partner queue. v2: In the error leg also push this queue if xmit_more is set Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Martin Habets <mhabets@solarflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: on 8000 series use TX queues for TX timestampsEdward Cree1-1/+2
For this we create and use one or more new TX queues on the PTP channel, and enable sync events for it. Based on a patch by Martin Habets <mhabets@solarflare.com>. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25sfc: handle TX timestamps in the normal data pathMartin Habets1-1/+19
Before this work, TX timestamping is done by sending each SKB to the MC. On the 8000 series (Medford1) we have high speed timestamping via the MAC, which means we can use normal TX queues for this without a significant drop in bandwidth. On the X2000 series (Medford2) support for transmitting via the MC is removed, so the new way must be used. This patch enables timestamping on a TX queue, if requested. It also enhances TX event handling to process the extra completion events, and puts the time in the SKB. Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08sfc: pass valid pointers from efx_enqueue_unwindBert Kenward1-1/+4
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers cannot be NULL. Add a paranoid warning to check this condition and fix the one case where they were NULL. efx_enqueue_unwind() is called very rarely, during error handling. Without this fix it would fail with a NULL pointer dereference in efx_dequeue_buffer, with efx_enqueue_skb in the call stack. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Tested-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-08net_sch: mqprio: Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIONogah Frankel1-1/+1
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new convention. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland1-3/+3
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-07net: sched: get rid of struct tc_to_netdevJiri Pirko1-3/+4
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: change return value of ndo_setup_tc for driver supporting mqprio onlyJiri Pirko1-1/+1
Change the return value from -EINVAL to -EOPNOTSUPP. The rest of the drivers have it like that, so be aligned. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: push cls related args into cls_common structureJiri Pirko1-1/+0
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: sched: make type an argument for ndo_setup_tcJiri Pirko1-3/+4
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko1-2/+2
We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15mqprio: Modify mqprio to pass user parameters via ndo_setup_tc.Amritha Nambiar1-1/+3
The configurable priority to traffic class mapping and the user specified queue ranges are used to configure the traffic class, overriding the hardware defaults when the 'hw' option is set to 0. However, when the 'hw' option is non-zero, the hardware QOS defaults are used. This patch makes it so that we can pass the data the user provided to ndo_setup_tc. This allows us to pull in the queue configuration if the user requested it as well as any additional hardware offload type requested by using a value other than 1 for the hw value. Finally it also provides a means for the device driver to return the level supported for the offload type via the qopt->hw value. Previously we were just always assuming the value to be 1, in the future values beyond just 1 may be supported. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16sfc: get PIO buffer size from the NICEdward Cree1-1/+0
The 8000 series SFC NICs have 4K PIO buffers, rather than the 2K of the 7000 series. Rather than having a hard-coded PIO buffer size (ER_DZ_TX_PIOBUF_SIZE), read it from the GET_CAPABILITIES_V2 MCDI response. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16sfc: allow PIO more oftenEdward Cree1-0/+1
If an option descriptor has been sent on a queue but not followed by a packet, there will have been no completion event, so the read and write counts won't match and we'll think we can't do PIO. This combines with the fact that we have two TX queues (for en/disable checksum offload), and that both must be empty for PIO to happen. This patch adds a separate "packet_write_count" that tracks the most recent write_count we expect to see a completion event for; this excludes option descriptors but _includes_ PIO descriptors (even though they look like option descriptors). This is then used, rather than write_count, in efx_nic_tx_is_empty(). We only bother to maintain packet_write_count on EF10, since on Siena (a) there are no option descriptors and it always equals write_count, and (b) there's no PIO, so we don't need it anyway. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03sfc: remove EFX_BUG_ON_PARANOID, use EFX_WARN_ON_[ONCE_]PARANOID insteadEdward Cree1-6/+6
Logically, EFX_BUG_ON_PARANOID can never be correct. For, BUG_ON should only be used if it is not possible to continue without potential harm; and since the non-DEBUG driver will continue regardless (as the BUG_ON is compiled out), clearly the BUG_ON cannot be needed in the DEBUG driver. So, replace every EFX_BUG_ON_PARANOID with either an EFX_WARN_ON_PARANOID or the newly defined EFX_WARN_ON_ONCE_PARANOID. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driverEdward Cree1-17/+5
Rationale: The differences between Falcon and Siena are in many ways larger than those between Siena and EF10 (despite Siena being nominally "Falcon- architecture"); for instance, Falcon has no MCPU, so there is no MCDI. Removing Falcon support from the sfc driver should simplify the latter, and avoid the possibility of Falcon support being broken by changes to sfc (which are rarely if ever tested on Falcon, it being end-of-lifed hardware). The sfc-falcon driver created in this changeset is essentially a copy of the sfc driver, but with Siena- and EF10-specific code, including MCDI, removed and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000- series") to avoid collisions when both drivers are built-in. This changeset removes Falcon from the sfc driver's PCI ID table; then in sfc I've removed obvious Falcon-related code: I removed the Falcon NIC functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything that referenced them. Also, increment minor version of both drivers (to 4.1). For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs doesn't cause Falcon support to disappear; but that should be undone at some point in the future. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27sfc: remove unneeded variableDan Carpenter1-2/+0
We don't use ->heap_buf after commit 46d1efd852cc ("sfc: remove Software TSO") so let's remove the last traces. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sfc: remove Software TSOEdward Cree1-5/+41
It gives no advantage over GSO now that xmit_more exists. If we find ourselves unable to handle a TSO skb (because our TXQ doesn't have a TSOv2 context and the NIC doesn't support TSOv1), hand it back to GSO. Also do that if the TSO handler fails with EINVAL for any other reason. As Falcon-architecture NICs don't support any firmware-assisted TSO, they no longer advertise TSO feature flags at all. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sfc: Firmware-Assisted TSO version 2Bert Kenward1-762/+251
Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task of TCP segmentation to the firmware, such that we now just pass a single super-packet to the NIC. This means TSO has a great deal in common with a normal DMA transmit, apart from adding a couple of option descriptors. NIC-specific checks have been moved off the fast path and in to initialisation where possible. This also moves FATSOv1/SWTSO to a new file (tx_tso.c). The end of transmit and some error handling is now outside TSO, since it is common with other code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: relax setup_tc ndo op handle restrictionJohn Fastabend1-1/+1
I added this check in setup_tc to multiple drivers, if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) Unfortunately restricting to TC_H_ROOT like this breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test to only check the type to make it equivalent to the check before I broke it. With this the old instantiation continues to work. A good smoke test is to setup mqprio with, # tc qdisc add dev eth4 root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 0@0 1@1 2@2 3@3 4@4 5@5 6@6 7@7 Fixes: e4c6734eaab9 ("net: rework ndo tc op to consume additional qdisc handle paramete") Reported-by: Singh Krishneil <krishneil.k.singh@intel.com> Reported-by: Jake Keller <jacob.e.keller@intel.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: rework setup_tc ndo op to consume general tc operandJohn Fastabend1-3/+6
This patch updates setup_tc so we can pass additional parameters into the ndo op in a generic way. To do this we provide structured union and type flag. This lets each classifier and qdisc provide its own set of attributes without having to add new ndo ops or grow the signature of the callback. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: rework ndo tc op to consume additional qdisc handle parameterJohn Fastabend1-1/+4
The ndo_setup_tc() op was added to support drivers offloading tx qdiscs however only support for mqprio was ever added. So we only ever added support for passing the number of traffic classes to the driver. This patch generalizes the ndo_setup_tc op so that a handle can be provided to indicate if the offload is for ingress or egress or potentially even child qdiscs. CC: Murali Karicheri <m-karicheri2@ti.com> CC: Shradha Shah <sshah@solarflare.com> CC: Or Gerlitz <ogerlitz@mellanox.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01sfc: make TSO version a per-queue parameterBert Kenward1-2/+6
The Solarflare 8000 series NIC will use a new TSO scheme. The current driver refuses to load if the current TSO scheme is not found. Remove that check and instead make the TSO version a per-queue parameter. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02sfc: push partner queue for skb->xmit_moreMartin Habets1-2/+28
When the IP stack passes SKBs the sfc driver puts them in 2 different TX queues (called partners), one for checksummed and one for not checksummed. If the SKB has xmit_more set the driver will delay pushing the work to the NIC. When later it does decide to push the buffers this patch ensures it also pushes the partner queue, if that also has any delayed work. Before this fix the work in the partner queue would be left for a long time and cause a netdev watchdog. Fixes: 70b33fb ("sfc: add support for skb->xmit_more") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09sfc: Report TX completions to BQL after all TX events in interruptPeter Dunning1-1/+2
The limit for BQL is updated each time we call netdev_tx_completed_queue. Without this patch the BQL limit was updated for every TX event we see. The issue was that this only updated the limit to handle the data we complete in two events as the first event wouldn't show that enough traffic had been processed between them. This was OK when interrupt moderation was off but not when it was on as more data had to be completed in a single interrupt. The patch changes this so that we do report the completion to BQL only when all the TX events in the interrupt have been processed. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-22sfc: remove incorrect EFX_BUG_ON_PARANOID checkJon Cooper1-4/+0
write_count and insert_count can wrap around, making > check invalid. Fixes: 70b33fb0ddec827cbbd14cdc664fc27b2ef4a6b6 ("sfc: add support for skb->xmit_more"). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17sfc: add support for skb->xmit_moreEdward Cree1-24/+19
Don't ring the doorbell, and don't do PIO. This will also prevent TX Push, because there will be more than one buffer waiting when the doorbell is rung. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09sfc: Convert the normal transmit complete path to dev_consume_skb_any()Rick Jones1-1/+1
Convert the normal transmit completion path from dev_kfree_skb_any() to dev_consume_skb_any() to help keep dropped packet profiling meaningful. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29sfc: Use __iowrite64_copy instead of a slightly different local functionBen Hutchings1-17/+7
__iowrite64_copy() isn't quite the same as efx_memcpy_64(), but it looks close enough: - The length is in units of qwords not bytes - It never byte-swaps, but that doesn't make a difference now as PIO is only enabled for x86_64 - It doesn't include any memory barriers, but that's OK as there is a barrier just before pushing the doorbell - mlx4_en uses it for the same purpose Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17sfc: Add per-queue statistics in ethtoolAndrew Rybchenko1-0/+4
Implement per channel software TX and RX packet counters accessed as ethtool statistics. This allows confirmation with MAC statistics. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11sfc: PIO:Restrict to 64bit arch and use 64-bit writes.Jon Cooper1-5/+17
Fixes:ee45fd92c739 ("sfc: Use TX PIO for sufficiently small packets") The linux net driver uses memcpy_toio() in order to copy into the PIO buffers. Even on a 64bit machine this causes 32bit accesses to a write- combined memory region. There are hardware limitations that mean that only 64bit naturally aligned accesses are safe in all cases. Due to being write-combined memory region two 32bit accesses may be coalesced to form a 64bit non 64bit aligned access. Solution was to open-code the memory copy routines using pointers and to only enable PIO for x86_64 machines. Not tested on platforms other than x86_64 because this patch disables the PIO feature on other platforms. Compile-tested on x86 to ensure that works. The WARN_ON_ONCE() code in the previous version of this patch has been moved into the internal sfc debug driver as the assertion was unnecessary in the upstream kernel code. This bug fix applies to v3.13 and v3.14 stable branches. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12sfc: Rename 'use_options' variable in tso_start() to clearer 'use_opt_desc'Ben Hutchings1-2/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12sfc: Replace TSOH_OFFSET with the equivalent NET_IP_ALIGNBen Hutchings1-13/+4
If CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined then NET_IP_ALIGN will be defined as 0, so this macro is redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06drivers/net: fix build warning in ethernet/sfc/tx.cPaul Gortmaker1-0/+2
Commit ee45fd92c739db5b7950163d91dfe5f016af6d24 ("sfc: Use TX PIO for sufficiently small packets") introduced the following warning: drivers/net/ethernet/sfc/tx.c: In function 'efx_enqueue_skb': drivers/net/ethernet/sfc/tx.c:432:1: warning: label 'finish_packet' defined but not used Stick the label inside the same #ifdef that the code which calls it uses. Note that this is only seen for arch that do not set ARCH_HAS_IOREMAP_WC, such as arm, mips, sparc, ..., as the others enable the write combining code and hence use the label. Cc: Jon Cooper <jcooper@solarflare.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-31sfc: Fix DMA unmapping issue with firmware assisted TSOAlexandre Rames1-2/+5
When using firmware assisted TSO, we use a single DMA mapping for the linear area of a TSO skb. We still have to segment the super-packet and insert a descriptor containing the original headers before each segment of payload, so we can unmap the linear area only after the last segment is completed. The unmapping information for the linear area is therefore associated with the last header descriptor. We calculate the DMA address to unmap from using the map length and the invariant that the end of the DMA mapping matches the end of the data referenced by the last descriptor. But this invariant is broken when there is TCP payload in the linear area. Fix this by adding and using an explicit dma_offset field. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>