aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski1-1/+1
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16net: stmmac: add ethtool per-queue irq statistic supportVijayakannan Ayyathurai1-0/+2
Adding ethtool per-queue statistics support to show number of interrupts generated at DMA tx and DMA rx. All the counters are incremented at dwmac4_dma_interrupt function. Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16net: stmmac: fix INTR TBU status affecting irq count statisticVoon Weifeng1-2/+3
DMA channel status "Transmit buffer unavailable(TBU)" bit is not considered as a successful dma tx. Hence, it should not affect all the irq count statistic. Fixes: 1103d3a5531c ("net: stmmac: dwmac4: Also use TBU interrupt to clean TX path") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: stmmac: use interrupt mode INTM=1 for multi-MSIWong, Vee Khee1-12/+11
For interrupt mode INTM=0, TX/RX transfer complete will trigger signal not only on sbd_perch_[tx|rx]_intr_o (Transmit/Receive Per Channel) but also on the sbd_intr_o (Common). As for multi-MSI implementation, setting interrupt mode INTM=1 is more efficient as each TX intr and RX intr (TI/RI) will be handled by TX/RX ISR without the need of calling the common MAC ISR. Updated the TX/RX NORMAL interrupts status checking process as the NIS status bit is not asserted for any RI/TI events for INTM=1. Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com> Co-developed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: stmmac: introduce DMA interrupt status masking per traffic directionOng Boon Leong1-1/+6
In preparation to make stmmac support multi-vector MSI, we introduce the interrupt status masking according to RX, TX or RXTX. Default to use RXTX inside stmmac_dma_interrupt(), so there is no run-time logic difference now. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-26net: stmmac: stop each tx channel independentlyJoakim Zhang1-4/+0
If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users may only want to stop specific tx channel. Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08net: stmmac: increase the timeout for dma resetFugang Duan1-1/+1
Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net: stmmac: use readl_poll_timeout() function in dwmac4_dma_reset()Dejin Zheng1-11/+4
The dwmac4_dma_reset() function use an open coded of readl_poll_timeout(). Replace the open coded handling with the proper function. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Let TX and RX interrupts be independently enabled/disabledJose Abreu1-8/+39
By using this mechanism we can get rid of the not so nice method of scheduling TX NAPI when the RX was scheduled. No bandwidth reduction was seen with this change. Changes from v1: - Remove useless comment (Jakub) - Do not bind the TX clean to NAPI budget (Jakub) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+1
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24net: stmmac: dwmac4/5: Do not disable whole RX in dma_stop_rx()Jose Abreu1-4/+0
We don't need to disable the whole RX when dma_stop_rx() is called because there may be the need of just disabling 1 DMA channel. This is also needed for stmmac Flow Control selftest. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: stmmac: dwmac4: Also use TBU interrupt to clean TX pathJose Abreu1-17/+7
TBU interrupt is a normal interrupt and can be used to trigger the cleaning of TX path. Lets check if it's active in DMA interrupt handler. While at it, refactor a little bit the function: - Don't check if RI is enabled because at function exit we will only clear the interrupts that are enabled so, no event will be missed. In my tests with GMAC5 this increased performance. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare rx/tx set tail function for multiple queuesJoao Pinto1-2/+2
This patch prepares RX and TX set tail functions for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx and tx ring length prepared for multiple queuesJoao Pinto1-4/+4
This patch prepares tx and rx ring length configuration for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma interrupt treatment for multiple queuesJoao Pinto1-4/+4
This patch prepares DMA interrupts treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx/tx dma start/stop prepared for multiple queuesJoao Pinto1-12/+12
This patch prepares the RX/TX DMA stop/start process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: enable/disable dma irq prepared for multiple queuesJoao Pinto1-6/+6
This patch prepares the DMA IRQ enable/disable process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02stmmac: add DMA support for GMAC 4.xxAlexandre TORGUE1-0/+225
DMA behavior is linked to descriptor management: -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. Up to 8 DMA could be use but currently we only use one (channel0) Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.