aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/hamradio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07hamradio: fix issue of dev reference count leakage in bpq_device_event()Zhengchao Shao1-1/+1
When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld3-3/+3
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld3-3/+3
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17hamradio: 6pack: fix array-index-out-of-bounds in decode_std_command()Xu Jia1-1/+8
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment. The situation is shown below: (Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i]; sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug. The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ... Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xu Jia <xujia39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: hamradio: remove support for DMA SCC devicesJakub Kicinski3-1485/+0
Another incarnation of Z8530, looks like? Again, no real changes in the git history, and it needs VIRT_TO_BUS. Unlikely to have users, let's spend less time refactoring dead code... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16hamradio: Fix wrong assignment of 'bbc->cfg.loopback'Meng Tang1-2/+2
In file hamradio/baycom_epp.c, the baycom_setmode interface, there is a problem with improper use of strstr. Suppose that when modestr="noloopback", both conditions which are 'strstr(modestr,"noloopback")' and 'strstr(modestr,"loopback")' will be true(not NULL), this lead the bc->cfg.loopback variable will be first assigned to 0, and then reassigned to 1. This will cause 'bc->cfg.loopback = 0' will never take effect. That obviously violates the logic of the code, so adjust the order of their execution to solve the problem. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220315074851.6456-1-tangmeng@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-02net: hamradio: fix compliation errorWang Qing1-1/+1
add missing ")" which caused by previous commit. Fixes: 61c4fb9c4d09 ("net: hamradio: use time_is_after_jiffies() instead of open coding it") Link: https://lore.kernel.org/all/1646018012-61129-1-git-send-email-wangqing@vivo.com/ Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1646203277-83159-1-git-send-email-wangqing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28net: hamradio: use time_is_after_jiffies() instead of open coding itWang Qing1-3/+4
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()Duoming Zhou1-2/+2
When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25yam: fix a memory leak in yam_siocdevprivate()Hangyu Hua1-3/+1
ym needs to be free when ym->cmd != SIOCYAMSMCS. Fixes: 0781168e23a2 ("yam: fix a missing-check bug") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-12Merge tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2-4/+4
Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-0/+2
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski2-0/+2
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-18hamradio: improve the incomplete fix to avoid NPDLin Ma1-2/+2
The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-06Merge 5.16-rc4 into tty-nextGreg Kroah-Hartman1-0/+2
We need the tty/serial driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25tty: remove file from tty_ldisc_ops::ioctl and compat_ioctlJiri Slaby2-4/+4
After the previous patches, noone needs 'file' parameter in neither ioctl hook from tty_ldisc_ops. So remove 'file' from both of them. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [NFC] Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-23hamradio: fix macro redefine warningHuang Pei1-0/+2
MIPS/IA64 define END as assembly function ending, which conflict with END definition in mkiss.c, just undef it at first Reported-by: lkp@intel.com Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-12hamradio: remove needs_free_netdev to avoid UAFLin Ma1-1/+0
The former patch "defer 6pack kfree after unregister_netdev" reorders the kfree of two buffer after the unregister_netdev to prevent the race condition. It also adds free_netdev() function in sixpack_close(), which is a direct copy from the similar code in mkiss_close(). However, in sixpack driver, the flag needs_free_netdev is set to true in sp_setup(), hence the unregister_netdev() will free the netdev automatically. Therefore, as the sp is netdev_priv, use-after-free occurs. This patch removes the needs_free_netdev = true and just let the free_netdev to finish this deallocation task. Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-11Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-6/+9
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and netfilter. Current release - regressions: - bpf: do not reject when the stack read size is different from the tracked scalar size - net: fix premature exit from NAPI state polling in napi_disable() - riscv, bpf: fix RV32 broken build, and silence RV64 warning Current release - new code bugs: - net: fix possible NULL deref in sock_reserve_memory - amt: fix error return code in amt_init(); fix stopping the workqueue - ax88796c: use the correct ioctl callback Previous releases - always broken: - bpf: stop caching subprog index in the bpf_pseudo_func insn - security: fixups for the security hooks in sctp - nfc: add necessary privilege flags in netlink layer, limit operations to admin only - vsock: prevent unnecessary refcnt inc for non-blocking connect - net/smc: fix sk_refcnt underflow on link down and fallback - nfnetlink_queue: fix OOB when mac header was cleared - can: j1939: ignore invalid messages per standard - bpf, sockmap: - fix race in ingress receive verdict with redirect to self - fix incorrect sk_skb data_end access when src_reg = dst_reg - strparser, and tls are reusing qdisc_skb_cb and colliding - ethtool: fix ethtool msg len calculation for pause stats - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to access an unregistering real_dev - udp6: make encap_rcv() bump the v6 not v4 stats - drv: prestera: add explicit padding to fix m68k build - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge - drv: mvpp2: fix wrong SerDes reconfiguration order Misc & small latecomers: - ipvs: auto-load ipvs on genl access - mctp: sanity check the struct sockaddr_mctp padding fields - libfs: support RENAME_EXCHANGE in simple_rename() - avoid double accounting for pure zerocopy skbs" * tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits) selftests/net: udpgso_bench_rx: fix port argument net: wwan: iosm: fix compilation warning cxgb4: fix eeprom len when diagnostics not implemented net: fix premature exit from NAPI state polling in napi_disable() net/smc: fix sk_refcnt underflow on linkdown and fallback net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer() gve: fix unmatched u64_stats_update_end() net: ethernet: lantiq_etop: Fix compilation error selftests: forwarding: Fix packet matching in mirroring selftests vsock: prevent unnecessary refcnt inc for nonblocking connect net: marvell: mvpp2: Fix wrong SerDes reconfiguration order net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory net: stmmac: allow a tc-taprio base-time of zero selftests: net: test_vxlan_under_vrf: fix HV connectivity test net: hns3: allow configure ETS bandwidth of all TCs net: hns3: remove check VF uc mac exist when set by PF net: hns3: fix some mac statistics is always 0 in device version V2 net: hns3: fix kernel crash when unload VF while it is being reset net: hns3: sync rx ring head in echo common pull net: hns3: fix pfc packet number incorrect after querying pfc parameters ...
2021-11-09hamradio: defer 6pack kfree after unregister_netdevLin Ma1-2/+4
There is a possible race condition (use-after-free) like below (USE) | (FREE) dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | 6pack_close sp_xmit | kfree sp_encaps | | According to the patch "defer ax25 kfree after unregister_netdev", this patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09hamradio: defer ax25 kfree after unregister_netdevLin Ma1-4/+5
There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-04Merge tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-1/+1
Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+3
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18hamradio: baycom_epp: fix build for UMLRandy Dunlap1-3/+3
On i386, the baycom_epp driver wants to inspect X86 CPU features (TSC) and then act on that data, but that info is not available when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/hamradio/baycom_epp.c: In function ‘epp_bh’: ../drivers/net/hamradio/baycom_epp.c:630:6: error: implicit declaration of function ‘boot_cpu_has’; did you mean ‘get_cpu_mask’? [-Werror=implicit-function-declaration] if (boot_cpu_has(X86_FEATURE_TSC)) \ ^ ../drivers/net/hamradio/baycom_epp.c:658:2: note: in expansion of macro ‘GETTICK’ GETTICK(time1); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-um@lists.infradead.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: linux-hams@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18Merge 5.15-rc6 into tty-nextGreg Kroah-Hartman1-0/+1
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13hamradio: use dev_addr_set() for setting device addressJakub Kicinski8-16/+14
Use dev_addr_set() instead of writing to netdev->dev_addr directly in hamradio drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-09net: use dev_addr_set()Jakub Kicinski6-7/+6
Use dev_addr_set() instead of writing directly to netdev->dev_addr in various misc and old drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28dmascc: add CONFIG_VIRT_TO_BUS dependencyArnd Bergmann1-0/+1
Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Merge 5.15-rc3 into tty-nextGreg Kroah-Hartman2-5/+5
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22tty: remove file from tty_mode_ioctlJiri Slaby1-1/+1
The only user of 'file' parameter in tty_mode_ioctl is a BUG_ON check. Provided it never crashed for anyone, it's an overkill to pass the parameter to tty_mode_ioctl only for this check. If we wanted to check 'file' there, we should handle it in more graceful way anyway. Not by a BUG == crash. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210914091134.17426-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-19dmascc: use proper 'virt_to_bus()' rather than casting to 'int'Linus Torvalds1-3/+3
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly just casts the kernel virtual address to 'int' for set_dma_addr(). That works only incidentally, and because the high bits of the address will be ignored anyway. And on 64-bit architectures it causes warnings. Admittedly, 64-bit architectures with ISA are basically dead - I think the only example of this is alpha, and nobody would ever use the dmascc driver there. But hey, the fix is easy enough, the end result is cleaner, and it's yet another configuration that now builds without warnings. If somebody actually uses this driver on an alpha and this fixes it for you, please email me. Because that is just incredibly bizarre. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16net: 6pack: Fix tx timeout and slot timeGuenter Roeck1-2/+2
tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16net: 6pack: fix slab-out-of-bounds in decode_dataPavel Skripkin1-0/+6
Syzbot reported slab-out-of bounds write in decode_data(). The problem was in missing validation checks. Syzbot's reproducer generated malicious input, which caused decode_data() to be called a lot in sixpack_decode(). Since rx_count_cooked is only 400 bytes and noone reported before, that 400 bytes is not enough, let's just check if input is malicious and complain about buffer overrun. Fail log: ================================================================== BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843 Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0 ... Workqueue: events_unbound flush_to_ldisc Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137 decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843 decode_data drivers/net/hamradio/6pack.c:965 [inline] sixpack_decode drivers/net/hamradio/6pack.c:968 [inline] Reported-and-tested-by: syzbot+fc8cd9a673d4577fb2e4@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27hamradio: use ndo_siocdevprivateArnd Bergmann9-60/+64
hamradio uses a set of private ioctls that do seem to work correctly in compat mode, as they only rely on the ifr_data pointer. Move them over to the ndo_siocdevprivate callback as a cleanup. Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: Joerg Reuter <jreuter@yaina.de> Cc: Jean-Paul Roubelat <jpr@f6fbb.org> Cc: linux-hams@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2-18/+9
Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-17net: hamradio: fix memory leak in mkiss_closePavel Skripkin1-0/+1
My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01hamradio: bpqether: Fix -Wunused-const-variable warningYueHaibing1-2/+2
If CONFIG_PROC_FS is n, gcc warns: drivers/net/hamradio/bpqether.c:437:36: warning: ‘bpq_seqops’ defined but not used [-Wunused-const-variable=] static const struct seq_operations bpq_seqops = { ^~~~~~~~~~ Use #ifdef macro to gurad this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net/hamradio/6pack: Fix inconsistent indentingJiapeng Chong1-6/+4
Eliminate the follow smatch warning: drivers/net/hamradio/6pack.c:728 sixpack_ioctl() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-20net: hamradio: remove leading spaces before tabsHui Tang5-17/+17
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13tty: no checking of tty_unregister_ldiscJiri Slaby2-14/+2
tty_unregister_ldisc now returns 0 = success. No need to check the return value. In fact, the users only warned if an error occured and didn't do anything useful anyway -- the ldisc module was unloaded in any case. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-19-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_ldisc_ops a param in tty_unregister_ldiscJiri Slaby2-2/+2
Make tty_unregister_ldisc symmetric to tty_register_ldisc by accepting struct tty_ldisc_ops as a parameter instead of ldisc number. This avoids checking of the ldisc number bounds in tty_unregister_ldisc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-17-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: set tty_ldisc_ops::num staticallyJiri Slaby2-2/+5
There is no reason to pass the ldisc number to tty_register_ldisc separately. Just set it in the already defined tty_ldisc_ops in all the ldiscs. This simplifies tty_register_ldisc a bit too (no need to set the num member there). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-15-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make fp of tty_ldisc_ops::receive_buf{,2} constJiri Slaby2-2/+2
Char pointer (cp) passed to tty_ldisc_ops::receive_buf{,2} is const. There is no reason for flag pointer (fp) not to be too. So switch it in the definition and all uses. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-12-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into tty-nextGreg Kroah-Hartman1-1/+0
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-15Merge 5.12-rc3 into tty-nextGreg Kroah-Hartman1-5/+0
Resolves a merge issue with: drivers/tty/hvc/hvcs.c and we want the tty/serial fixes from 5.12-rc3 in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: remove TTY_LDISC_MAGICJiri Slaby2-2/+0
First, it is never checked. Second, use of it as a debugging aid is at least questionable. With the current tools, I don't think anyone used this kind of thing for debugging purposes for years. On the top of that, e.g. serdev does not set this field of tty_ldisc_ops at all. So get rid of this legacy. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.