aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/netdevsim/netdevsim.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-07-18netdevsim: convert driver to use unlocked devlink API during init/finiJiri Pirko1-3/+0
Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21netdevsim: replace vfs_lock with devlink instance lockJakub Kicinski1-1/+0
Similarly to the previous commit, use the devlink instance lock and let it replace the vfs_lock. nsim_esw_legacy_enable() was locked by both port lock and vfs lock so one set of lock/unlocks goes away. netdevsim's .eswitch_mode_set callback is now ready for the callback to take the instance lock. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21netdevsim: replace port_list_lock with devlink instance lockJakub Kicinski1-1/+0
Take advantage of the devlink instance lock for protecting the port list. This will simplify locking even more once all devlink callbacks hold the instance lock. We need to add locking in nsim_dev_port_add_all() which used to assume higher layer protection when accessing the list. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-15netdevsim: Introduce support for L3 offload xstatsPetr Machata1-0/+23
Add support for testing of HW stats support that was added recently, namely the L3 stats support. L3 stats are provided for devices for which the L3 stats have been turned on, and that were enabled for netdevsim through a debugfs toggle: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and 20pps of egress traffic. Similarly, L3 stats can be disabled for a given device, and netdevsim ceases pretending there is any HW traffic going on: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex Besides this, there is a third toggle to mark a device for future failure: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable A future request to enable L3 stats on such netdevice will be bounced by netdevsim: # ip -j l sh dev d | jq '.[].ifindex' 66 # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable # ip stats set dev d l3_stats on Error: netdevsim: Stats enablement set to fail. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2021-11-01netdevsim: rename 'driver' entry pointsJakub Kicinski1-4/+4
Rename functions serving as driver entry points from nsim_dev_... to nsim_drv_... this makes the API boundary between bus and dev clearer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move max vf config to devJakub Kicinski1-7/+0
max_vfs is a strange little beast because the file hangs off of nsim's debugfs, but it configures a field in the bus device. Move it to dev.c, let's look at it as if the device driver was imposing VF limit based on FW info (like pci_sriov_set_totalvfs()). Again, when moving refactor the function not to hold the vfs lock pointlessly while parsing the input. Wrap the access from the read side in READ_ONCE() to appease concurrency checkers. Do not check if return value from snprintf() is negative... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move details of vf config to devJakub Kicinski1-4/+2
Since "eswitch" configuration was added bus.c contains a lot of device details which really belong to dev.c. Restructure the code while moving it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move vfconfig to nsim_devJakub Kicinski1-15/+19
When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29netdevsim: remove max_vfs dentryJakub Kicinski1-1/+0
Commit d395381909a3 ("netdevsim: Add max_vfs to bus_dev") added this file and saved the dentry for no apparent reason. Link: https://lore.kernel.org/r/20211028211753.22612-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15netdevsim: add ability to change channel countJakub Kicinski1-0/+1
For testing visibility of mq/mqprio default children. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06netdevsim: Protect both reload_down and reload_up pathsLeon Romanovsky1-0/+1
Don't progress with adding and deleting ports as long as devlink reload is running. Fixes: 23809a726c0d ("netdevsim: Forbid devlink reload when adding or deleting ports") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16netdevsim: Add multi-queue supportPeilin Ye1-0/+1
Currently netdevsim only supports a single queue per port, which is insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend the current sysfs interface so that users can create ports with multiple queues: $ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port. Note, this is compatible with the current interface, with default number of queues set to 1. For example, echoing "2 4" creates 4 ports with 1 queue per port; echoing "2" simply creates 1 port with 1 queue. Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18drivers: net: netdevsim: fix devlink_trap selftests failingOleksandr Mazur1-1/+1
devlink_trap tests for the netdevsim fail due to misspelled debugfs file name. Change this name, as well as name of callback function, to match the naming as in the devlink itself - 'trap_drop_counter'. Test-results: selftests: drivers/net/netdevsim: devlink_trap.sh TEST: Initialization [ OK ] TEST: Trap action [ OK ] TEST: Trap metadata [ OK ] TEST: Non-existing trap [ OK ] TEST: Non-existing trap action [ OK ] TEST: Trap statistics [ OK ] TEST: Trap group action [ OK ] TEST: Non-existing trap group [ OK ] TEST: Trap group statistics [ OK ] TEST: Trap policer [ OK ] TEST: Trap policer binding [ OK ] TEST: Port delete [ OK ] TEST: Device delete [ OK ] Fixes: a7b3527a43fe ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation") Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14drivers: net: netdevsim: add devlink trap_drop_counter_get implementationOleksandr Mazur1-0/+1
Whenever query statistics is issued for trap with DROP action, devlink subsystem would also fill-in statistics 'dropped' field. In case if device driver did't register callback for hard drop statistics querying, 'dropped' field will be omitted and not filled. Add trap_drop_counter_get callback implementation to the netdevsim. Add new test cases for netdevsim, to test both the callback functionality, as well as drop statistics alteration check. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Allow setting parent node of rate objectsDmytro Linkin1-0/+2
Implement new devlink ops that allow setting rate node as a parent for devlink port (leaf) or another devlink node through devlink API. Expose parent names to netdevsim debugfs in read only mode. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement support for devlink rate nodesDmytro Linkin1-0/+1
Implement new devlink ops that allow creation, deletion and setting of shared/max tx rate of devlink rate nodes through devlink API. Expose rate node and it's tx rates to netdevsim debugfs. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement legacy/switchdev mode for VFsDmytro Linkin1-0/+14
Implement callbacks to set/get eswitch mode value. Add helpers to check current mode. Instantiate VFs' net devices and devlink ports on switchdev enabling and remove them on legacy enabling. Changing number of VFs while in switchdev mode triggers VFs creation/deletion. Also disable NDO API callback to set VF rate, since it's legacy API. Switchdev API to set VF rate will be implemented in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement port types and indexingDmytro Linkin1-0/+20
Define type of ports, which netdevsim driver currently operates with as PF. Define new port type - VF, which will be implemented in following patches. Add helper functions to distinguish them. Add helper function to get VF index from port index. Add port indexing logic where PFs' indexes starts from 0, VFs' - from NSIM_DEV_VF_PORT_INDEX_BASE. All ports uses same index pool, which means that PF port may be created with index from VFs' indexes range. Maximum number of VFs, which the driver can allocate, is limited by UINT_MAX - BASE. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Disable VFs on nsim_dev_reload_destroy() callDmytro Linkin1-0/+1
Move VFs disabling from device release() to nsim_dev_reload_destroy() to make VFs disabling and ports removal simultaneous. This is a requirement for VFs ports implemented in next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Add max_vfs to bus_devDmytro Linkin1-0/+10
Currently there is no limit to the number of VFs netdevsim can enable. In a real systems this value exist and used by the driver. Fore example, some features might need to consider this value when allocating memory. Expose max_vfs variable to debugfs as configurable resource. If are VFs configured (num_vfs != 0) then changing of max_vfs not allowed. Co-developed-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-31netdevsim: add FEC settings supportJakub Kicinski1-0/+3
Add support for ethtool FEC and some ethtool error injection. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-14netdevsim: Add dummy psample implementationIdo Schimmel1-0/+15
Allow netdevsim to report "sampled" packets to the psample module by periodically generating packets from a work queue. The behavior can be enabled / disabled (default) and the various meta data attributes can be controlled via debugfs knobs. This implementation enables both testing of the psample module with all the optional attributes as well as development of user space applications on top of psample such as hsflowd and a Wireshark dissector for psample generic netlink packets. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09netdevsim: Add debugfs toggle to reject BPF programs in verifierToke Høiland-Jørgensen1-0/+1
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be used to make netdevsim reject BPF programs from being accepted by the verifier. If this toggle (which defaults to true) is set to false, nsim_bpf_verify_insn() will return EOPNOTSUPP on the last instruction (after outputting the 'Hello from netdevsim' verifier message). This makes it possible to check the verification callback in the driver from test_offload.py in selftests, since the verifier now clears the verifier log on a successful load, hiding the message from the driver. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
2020-11-20netdevsim: support ethtool ring and coalesce settingsAntonio Cardace1-0/+3
Add ethtool ring and coalesce settings support for testing. Signed-off-by: Antonio Cardace <acardace@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20netdevsim: move ethtool pause params in separate structAntonio Cardace1-1/+5
This will help the refactoring in the next commit when coalesce and ring settings are added. Signed-off-by: Antonio Cardace <acardace@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06netdevsim: Add devlink resource for nexthopsIdo Schimmel1-0/+1
The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28netdevsim: support the static IANA VXLAN port flagJakub Kicinski1-0/+1
Allow setting UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: shared UDP tunnel port table supportJakub Kicinski1-1/+6
Add the ability to simulate a device with a shared UDP tunnel port table. Try to reject the configurations and actions which are not supported by the core, so we don't get syzcaller etc. warning reports. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25netdevsim: add support for flash_update overwrite maskJacob Keller1-0/+1
The devlink interface recently gained support for a new "overwrite mask" parameter that allows specifying how various sub-sections of a flash component are modified when updating. Add support for this to netdevsim, to enable easily testing the interface. Make the allowed overwrite mask values controllable via a debugfs parameter. This enables testing a flow where the driver rejects an unsupportable overwrite mask. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15netdevsim: add pause frame statsJakub Kicinski1-0/+11
Add minimal ethtool interface for testing ethtool pause stats. v2: add missing static on nsim_ethtool_ops Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-1/+1
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-10netdevsim: add UDP tunnel port offload supportJakub Kicinski1-0/+19
Add UDP tunnel port handlers to our fake driver so we can test the core infra. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Add support for setting of packet trap group parametersIdo Schimmel1-0/+1
Add a dummy callback to set trap group parameters. Return an error when the 'fail_trap_group_set' debugfs file is set in order to exercise error paths and verify that error is propagated to user space when should. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Add devlink-trap policer supportIdo Schimmel1-0/+2
Register three dummy packet trap policers with devlink and implement callbacks to change their parameters and read their counters. This will be used later on in the series to test the devlink-trap policer infrastructure. v2: * Remove check about burst size being a power of 2 and instead add a debugfs knob to fail the operation * Provide max/min rate/burst size when registering policers and remove the validity checks from nsim_dev_devlink_trap_policer_set() Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25netdevsim: add ACL trap reporting cookie as a metadataJiri Pirko1-0/+2
Add new trap ACL which reports flow action cookie in a metadata. Allow used to setup the cookie using debugfs file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-03netdevsim: fix panic in nsim_dev_take_snapshot_write()Taehee Yoo1-0/+1
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: disable devlink reload when resources are being usedTaehee Yoo1-0/+2
devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix using uninitialized resourcesTaehee Yoo1-0/+1
When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2019-10-11netdevsim: implement couple of testing devlink health reportersJiri Pirko1-0/+13
Implement "empty" and "dummy" reporters. The first one is really simple and does nothing. The other one has debugfs files to trigger breakage and it is able to do recovery. The ops also implement dummy fmsg content. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06netdevsim: add couple of debugfs bools to debug devlink reloadJiri Pirko1-0/+2
Add flag to disallow reload and another one that causes reload to always fail. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05netdevsim: create devlink and netdev instances in namespaceJiri Pirko1-0/+3
When user does create new netdevsim instance using sysfs bus file, create the devlink instance and related netdev instance in the namespace of the caller. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: register port netdevices into net of deviceJiri Pirko1-0/+5
Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: implement proper devlink reloadJiri Pirko1-5/+3
During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: change fib accounting and limitations to be per-deviceJiri Pirko1-4/+6
Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+4
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17netdevsim: Add devlink-trap supportIdo Schimmel1-0/+1
Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15netdevsim: implement support for devlink region and snapshotsJiri Pirko1-0/+1
Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11netdevsim: register couple of devlink paramsJiri Pirko1-0/+2
Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11netdevsim: Restore per-network namespace accounting for fib entriesDavid Ahern1-6/+4
Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.