aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/mdio_device.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-19net: mdio: introduce a shutdown method to mdio device driversVladimir Oltean1-0/+11
MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: print the function name by __func__ instead of an fixed stringWenpeng Liang1-2/+2
It's better to use __func__ than a fixed string to print a function's name. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: mdio device: use flexible sleeping in reset functionBruno Thomsen1-1/+1
MDIO device reset assert and deassert length was created by usleep_range() but that does not ensure optimal handling of all the different values from device tree properties. By switching to the new flexible sleeping helper function, fsleep(), the correct delay function is called depending on delay length, e.g. udelay(), usleep_range() or msleep(). Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: Fixup parameters in kerneldocAndrew Lunn1-1/+1
Correct the kerneldoc for a few structure and function calls, as reported by C=1 W=1. Cc: Alexandru Ardelean <alexaundru.ardelean@analog.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26net: phy: mdio: reset MDIO devices even if probe() is not implementedBartosz Golaszewski1-7/+6
Similarily to PHY drivers - there's no reason to require probe() to be implemented in order to call mdio_device_reset(). MDIO devices can have resets defined without needing to do anything in probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26net: phy: arrange headers in mdio_device.c alphabeticallyBartosz Golaszewski1-1/+1
Keeping the headers in alphabetical order is better for readability and allows to easily see if given header is already included. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello1-1/+1
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: mdio: rename mdio_device reset to reset_gpioDavid Bauer1-3/+3
This renames the GPIO reset of mdio devices from 'reset' to 'reset_gpio' to better differentiate between GPIO and reset-controller driven reset line. Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: phy: add support for reset-controllerDavid Bauer1-2/+11
This commit adds support for PHY reset pins handled by a reset controller. Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn1-6/+1
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27phylib: rename reset-(post-)delay-us to reset-(de)assert-usRichard Leitner1-1/+1
As suggested by Rob Herring [1] rename the previously introduced reset-{,post-}delay-us bindings to the clearer reset-{,de}assert-us [1] https://patchwork.kernel.org/patch/10104905/ Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13phylib: Add device reset delay supportRichard Leitner1-2/+11
Some PHYs need a minimum time after the reset gpio was asserted and/or deasserted. To ensure we meet these timing requirements add two new optional devicetree parameters for the phy: reset-delay-us and reset-post-delay-us. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05phylib: Add device reset GPIO supportSergei Shtylyov1-2/+23
The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: Allow pre-declaration of MDIO devicesFlorian Fainelli1-0/+11
Allow board support code to collect pre-declarations for MDIO devices by registering them with mdiobus_register_board_info(). SPI and I2C buses have a similar feature, we were missing this for MDIO devices, but this is particularly useful for e.g: MDIO-connected switches which need to provide their port layout (often board-specific) to a MDIO Ethernet switch driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08mdio: Demote print from info to debug in mdio_device_registerFlorian Fainelli1-1/+1
While it is useful to know which MDIO device is being registered, demote the dev_info() to a dev_dbg(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14mdio: Demote print from info to debug in mdio_driver_registerFlorian Fainelli1-1/+1
While it is useful to know which MDIO driver is being registered, demote the pr_info() to a pr_debug(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Abstract device_remove() and device_free()Andrew Lunn1-0/+2
Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn1-0/+169
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.