aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-01net: phylink: Fix phylink_dbg() macroFlorian Fainelli1-0/+16
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG) and as a result, it spams the kernel log since a PR_DEBUG level is currently used. Fix it to be defined appropriately whether CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set. Fixes: 17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flagMartin Fuzzey1-0/+1
The LAN8740, like the 8720, also requires a reset after enabling clock. The datasheet [1] 3.8.5.1 says: "During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal." I have observed this issue on a custom i.MX6 based board with the LAN8740A. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18net: phy: bcm7xxx: define soft_reset for 40nm EPHYDoug Berger1-0/+1
The internal 40nm EPHYs use a "Workaround for putting the PHY in IDDQ mode." These PHYs require a soft reset to restore functionality after they are powered back up. This commit defines the soft_reset function to use genphy_soft_reset during phy_init_hw to accommodate this. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: phy: micrel: Update KSZ87xx PHY nameMarek Vasut1-2/+2
The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYsMarek Vasut1-4/+36
The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs in the micrel PHY driver, it is used even with the KSZ87xx switch. This is wrong, since the KSZ8051 configures registers of the PHY which are not present on the simplified KSZ87xx switch PHYs and misconfigures other registers of the KSZ87xx switch PHYs. Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the KSZ87xx switch by checking the Basic Status register Bit 0, which is read-only and indicates presence of the Extended Capability Registers. The KSZ8051 PHY has those registers while the KSZ87xx switch does not. This patch implements simple check for the presence of this bit for both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct PHY driver instance. Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16net: phy: Fix "link partner" information disappear issueYonglong Liu3-4/+12
Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-09phylink: fix kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warnings in phylink.c: ../drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create' ../drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create' Fixes: 8796c8923d9c ("phylink: add documentation for kernel APIs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-04net: phy: at803x: use operating parameters from PHY-specific statusRussell King1-0/+69
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract pause modeRussell King1-7/+13
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract link partner advertisement readingRussell King1-25/+40
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: fix write to mii-ctrl1000 registerRussell King1-0/+5
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello1-1/+1
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: phy: micrel: add Asym Pause workaround for KSZ9021Hans Andersson1-0/+3
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround") Signed-off-by: Hans Andersson <hans.andersson@cellavision.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski1-3/+3
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-21net/phy: fix DP83865 10 Mbps HDX loopback disable functionPeter Mamonov1-3/+6
According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1. Fixes: 4621bf129856 ("phy: Add file missed in previous commit.") Signed-off-by: Peter Mamonov <pmamonov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds29-210/+1379
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds1-8/+1
Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-16net: phy: adin: implement Energy Detect Powerdown mode via phy-tunableAlexandru Ardelean1-0/+61
This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD` phy-tunable feature. EDPD is also enabled by default on PHY config_init, but can be disabled via the phy-tunable control. When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX periodic pulses, so that in case the other PHY is also on EDPD mode, there is no lock-up situation where both sides are waiting for the other to transmit. Via the phy-tunable control, TX pulses can be disabled if specifying 0 `tx-interval` via ethtool. The ADIN PHY supports only fixed 1 second intervals; they cannot be configured. That is why the acceptable values are 1, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables TX pulses). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: mdio: switch to using gpiod_get_optional()Dmitry Torokhov1-13/+9
The MDIO device reset line is optional and now that gpiod_get_optional() returns proper value when GPIO support is compiled out, there is no reason to use fwnode_get_named_gpiod() that I plan to hide away. Let's switch to using more standard gpiod_get_optional() and gpiod_set_consumer_name() to keep the nice "PHY reset" label. Also there is no reason to only try to fetch the reset GPIO when we have OF node, gpiolib can fetch GPIO data from firmwares as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+3
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: phy: dp83867: Add SGMII mode type switchingVitaly Gaiduk1-0/+19
This patch adds ability to switch beetween two PHY SGMII modes. Some hardware, for example, FPGA IP designs may use 6-wire mode which enables differential SGMII clock to MAC. Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net: phylink: Fix flow control resolutionStefan Chulski1-3/+3
Regarding to IEEE 802.3-2015 standard section 2 28B.3 Priority resolution - Table 28-3 - Pause resolution In case of Local device Pause=1 AsymDir=0, Link partner Pause=1 AsymDir=1, Local device resolution should be enable PAUSE transmit, disable PAUSE receive. And in case of Local device Pause=1 AsymDir=1, Link partner Pause=1 AsymDir=0, Local device resolution should be enable PAUSE receive, disable PAUSE transmit. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reported-by: Shaul Ben-Mayor <shaulb@marvell.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: phy: Do not check Link status when loopback is enabledJose Abreu1-0/+6
While running stmmac selftests I found that in my 1G setup some tests were failling when running with PHY loopback enabled. It looks like when loopback is enabled the PHY will report that Link is down even though there is a valid connection. As in loopback mode the data will not be sent anywhere we can bypass the logic of checking if Link is valid thus saving unecessary reads. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: phy: gmii2rgmii: Dont use priv field in phy deviceHarini Katakam1-2/+2
Use set/get drv data in phydev's mdio device instead. Phy device priv field maybe used by the external phy driver and should not be overwritten. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-1/+27
r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28net: phy: force phy suspend when calling phy_stopJian Shen1-1/+1
Some ethernet drivers may call phy_start() and phy_stop() from ndo_open() and ndo_close() respectively. When network cable is unconnected, and operate like below: step 1: ifconfig ethX up -> ndo_open -> phy_start ->start autoneg, and phy is no link. step 2: ifconfig ethX down -> ndo_close -> phy_stop -> just stop phy state machine. This patch forces phy suspend even phydev->link is off. Signed-off-by: Jian Shen <shenjian15@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28phy: mdio-sun4i: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28phy: mdio-mux-meson-g12a: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28phy: mdio-bcm-iproc: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Add genphy_c45_config_aneg() function to phy-c45.cMarco Hartmann2-1/+27
Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24net: phy: sfp: Add labels to hwmon sensorsAndrew Lunn1-5/+68
SFPs can report two different power values, the transmit power and the receive power. Add labels to make it clear which is which. Also add labels to the other sensors, VCC power supply, bias and module temperature. sensors(1) now shows: sff2-isa-0000 Adapter: ISA adapter VCC: +3.23 V temperature: +33.4 C TX_power: 276.00 uW RX_power: 20.00 uW bias: +0.01 A Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19net: phy: realtek: support NBase-T MMD EEE registers on RTL8125Heiner Kallweit1-2/+43
Emulate the 802.3bz MMD EEE registers for 2.5Gbps EEE on RTL8125. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-25/+33
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: phy: remove genphy_config_initHeiner Kallweit1-51/+0
Now that all users have been removed we can remove genphy_config_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: phy: remove calls to genphy_config_initHeiner Kallweit10-33/+9
Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers. v2: - remove call also from new adin PHY driver v3: - pass NULL as config_init function pointer for dp83848 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add ethtool get_stats supportAlexandru Ardelean1-0/+128
This change implements retrieving all the error counters from the PHY. The counters require that the RxErrCnt register (0x0014) be read first, after which copies of the counters are latched into the registers. This ensures that all registers read after RxErrCnt are synchronized at the moment that they are read. The counter values need to be accumulated by the driver, as each time that RxErrCnt is read, the values that are latched are the ones that have incremented from the last read. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: implement downshift configuration via phy-tunableAlexandru Ardelean1-0/+86
Down-speed auto-negotiation may not always be enabled, in which case the PHY won't down-shift to 100 or 10 during auto-negotiation. This change enables downshift and configures the number of retries to default 4 (which is also in the datasheet The downshift control mechanism can also be controlled via the phy-tunable interface (ETHTOOL_PHY_DOWNSHIFT control). The change has been adapted from the Aquantia PHY driver. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: implement PHY subsystem software resetAlexandru Ardelean1-0/+26
The ADIN PHYs supports 4 types of reset: 1. The standard PHY reset via BMCR_RESET bit in MII_BMCR reg 2. Reset via GPIO 3. Reset via reg GeSftRst (0xff0c) & reload previous pin configs 4. Reset via reg GeSftRst (0xff0c) & request new pin configs Resets 2, 3 & 4 are almost identical, with the exception that the crystal oscillator is available during reset for 2. This change implements subsystem software reset via the GeSftRst and reloading the previous pin configuration (so reset number 3). This will also reset the PHY core regs (similar to reset 1). Since writing bit 1 to reg GeSftRst is self-clearing, the only thing that can be done, is to write to that register, wait a specific amount of time (10 milliseconds should be enough) and try to read back and check if there are no errors on read. A busy-wait-read won't work well, and may sometimes work or not work. In case phylib is configured to also do a reset via GPIO, the ADIN PHY may be reset twice when the PHY device registers, but that isn't a problem, since it's being done on boot (or PHY device register). Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add EEE translation layer from Clause 45 to Clause 22Alexandru Ardelean1-2/+66
The ADIN1200 & ADIN1300 PHYs support EEE by using standard Clause 45 access to access MMD registers for EEE. The EEE register addresses (when using Clause 22) are available at different addresses (than Clause 45), and since accessing these regs (via Clause 22) needs a special mechanism, a translation table is required to convert these addresses. For Clause 45, this is not needed since the driver will likely never use this access mode. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add support MDI/MDIX/Auto-MDI selectionAlexandru Ardelean1-4/+113
The ADIN PHYs support automatic MDI/MDIX negotiation. By default this is disabled, so this is enabled at `config_init`. This is controlled via the PHY Control 1 register. The supported modes are: 1. Manual MDI 2. Manual MDIX 3. Auto MDIX - prefer MDIX 4. Auto MDIX - prefer MDI The phydev mdix & mdix_ctrl fields include modes 3 & 4 into a single auto-mode. So, the default mode this driver enables is 4 when Auto-MDI mode is used. When detecting MDI/MDIX mode, a combination of the PHY Control 1 register and PHY Status 1 register is used to determine the correct MDI/MDIX mode. If Auto-MDI mode is not set, then the manual MDI/MDIX mode is returned. If Auto-MDI mode is set, then MDIX mode is returned differs from the preferred MDI/MDIX mode. This covers all cases where: 1. MDI preferred & Pair01Swapped == MDIX 2. MDIX preferred & Pair01Swapped == MDI 3. MDI preferred & ! Pair01Swapped == MDIX 4. MDIX preferred & ! Pair01Swapped == MDI The preferred MDI/MDIX mode is not configured via SW, but can be configured via HW pins. Note that the `Pair01Swapped` is the Green-Yellow physical pairs. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: make RMII fifo depth configurableAlexandru Ardelean1-0/+29
The FIFO depth can be configured for the RMII mode. This change adds support for doing this via device-tree (or ACPI). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: make RGMII internal delays configurableAlexandru Ardelean1-0/+82
The internal delays for the RGMII are configurable for both RX & TX. This change adds support for configuring them via device-tree (or ACPI). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: configure RGMII/RMII/MII modes on configAlexandru Ardelean1-1/+78
The ADIN1300 chip supports RGMII, RMII & MII modes. Default (if unconfigured) is RGMII. This change adds support for configuring these modes via the device registers. For RGMII with internal delays (modes RGMII_ID,RGMII_TXID, RGMII_RXID), the default delay is 2 ns. This can be configurable and will be done in a subsequent change. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add {write,read}_mmd hooksAlexandru Ardelean1-0/+34
Both ADIN1200 & ADIN1300 support Clause 45 access for some registers. The Extended Management Interface (EMI) registers are accessible via both Clause 45 (at register MDIO_MMD_VEND1) and using Clause 22. The Clause 22 access for MMD regs differs from the standard one defined by 802.3. The ADIN PHYs use registers ExtRegPtr (0x0010) and ExtRegData (0x0011) to access Clause 45 & EMI registers. The indirect access is done via the following mechanism (for both R/W): 1. Write the address of the register in the ExtRegPtr 2. Read/write the value of the register via reg ExtRegData This mechanism is needed to manage configuration of chip settings and to access EEE registers via Clause 22. Since Clause 45 access will likely never be used, it is not implemented via this hook. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add support for interruptsAlexandru Ardelean1-0/+36
This change hooks link-status-change interrupts to phylib. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: hook genphy_{suspend, resume} into the driverAlexandru Ardelean1-0/+4
The chip supports standard suspend/resume via BMCR reg. Hook these functions into the `adin` driver. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16net: phy: adin: add support for Analog Devices PHYsAlexandru Ardelean3-0/+59
This change adds support for Analog Devices Industrial Ethernet PHYs. Particularly the PHYs this driver adds support for: * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit Ethernet PHY The 2 chips are register compatible with one another. The main difference being that ADIN1200 doesn't operate in gigabit mode. The chips can be operated by the Generic PHY driver as well via the standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the kernel as well. This assumes that configuration of the PHY has been done completely in HW, according to spec. Configuration can also be done via registers, which will be supported by this driver. Datasheets: https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15net: phy: realtek: add support for EEE registers on integrated PHY'sHeiner Kallweit1-0/+43
EEE-related registers on newer integrated PHY's have the standard layout, but are accessible not via MMD but via vendor-specific registers. Emulating the standard MMD registers allows to use the generic functions for EEE control. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.