aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/qlcnic/qlcnic_hdr.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-10qlogic: Move the QLogic driversJeff Kirsher1-1023/+0
Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-05-13qlcnic: FW dump supportAnirban Chakraborty1-4/+36
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17qlcnic: fix ocm window register offset calculationRajesh Borundia1-1/+1
OCM window register offset was calculated incorrectly for pci function greater than zero. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: LICENSE file for qlcnicSritej Velaga1-20/+3
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qlcnic: avoid using reset_devices as it may become obsolete.Rajesh Borundia1-1/+1
In kdump environment do not depend upon reset_devices parameter to reset the pci function as this parameter may become obsolete. Instead use an adapter specific mechanism to determine if the pci function needs to be reset. Per function refcount is maintained in driver, which is set in probe and reset in remove handler of adapter. If the probe detects the count as non zero then reset the function. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga1-12/+12
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01qlcnic: backout firmware initialization updateSony Chacko1-1/+5
o Backing out "firmware initialization update" changes, commit-id "d4066833bb1b35fefb1dd45eb2b10659d46bf151". o fix heartbit spelling, it should be heartbeat Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26qlcnic: Fix driver load issue in FW hangAnirban Chakraborty1-1/+1
If there is a FW hang when the driver loads, it can not determine the FW operational mode. Fix it by checking the FW state first before issuing any FW commands to determine its capabilities and thereby detecting driver operational mode. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: change reg nameAmit Kumar Salecha1-1/+1
Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match document. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: firmware initialization updateSony Chacko1-1/+2
Cleanup legacy code which is not valid for Qlogic CNA adapters. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure port on eswitchRajesh Borundia1-0/+7
o Nic partition capable devices has embedded switch, this needs to support various features like external switch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: replace magic numbers with definesSony Chacko1-0/+4
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17qlcnic: device state management fixes for virtual funcAmit Kumar Salecha1-2/+3
o NPAR state should be set to operationl by Mangement function only. o NPAR state should be set to non operational before device reset. o VF function should wait for NPAR state to be operational. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29qlcnic: Remove obsolete codeAnirban Chakraborty1-6/+0
Current driver uses FW API version 2 and thus code corresponding to FW API version 1 has become obsolete. Clean up this from the driver. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02qlcnic: NIC Partitioning - Add non privileged mode supportAnirban Chakraborty1-5/+9
Added support for NIC functions that work in non privileged mode where these functions are privileged to do IO only, the control operations are handled via privileged functions. Bumped up version number to 5.0.3. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02qlcnic: NIC Partitioning - Add basic infrastructure supportAnirban Chakraborty1-0/+70
Following changes have been added to enable the adapter to work in NIC partitioning mode where multiple PCI functions of an adapter port can be configured to work as NIC functions. The first function that is enumerated on the PCI bus assumes the role of management function which, besides being able to do all the NIC functionality, can configure other NIC partitions. Other NIC functions can be configured as privileged or non privileged functions. Privileged function can not configure other NIC functions but can do all the NIC functionality including any firmware initialization, chip reset etc. Non privileged functions can do only basic IO. For chip reset etc, it depends on the privilege or management function. 1. Added code to determine PCI function number independent of kernel API. 2. Added Driver - FW version 2.0 support. 3. Changed producer and consumer register offset calculation. 4. Added management and privileged operation modes for npar functions. A module parameter has been added to control it. 5. Added support for configuring the eswitch in the adapter. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qlcnic: remove unused registerAmit Kumar Salecha1-16/+0
Removing register defines which are not used by Qlgoic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14qlcnic: remove obsolete registerAmit Kumar Salecha1-7/+0
MSI_MODE, CAPABILITIES_FW and SCRATCHPAD registers are obsolete. Driver should not use them. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: define macro for driver stateAmit Kumar Salecha1-0/+6
Defining macro to set and clear driver state. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: fix defines as per IDC documentAmit Kumar Salecha1-11/+11
Different class of drivers co-exist for CNA device, there is some minimal interaction that will be required amongst the drivers for performing some device level operations. All the driver should follow inter driver coexistence document. Fixing polling interval and spelling mistake. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: use IDC defined timeout valueSucheta Chakraborty1-0/+2
o USE/Read IDC defined timeout value from ROM. o While resetting chip, don't wait for other pci-func to respond, more than reset_ack_timeo seconds, Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: update oncard memory size checkDhananjay Phadke1-1/+1
All QLogic converged NICs have 128-bit 128MB on card memory. Fix the limit check from 64MB to 128MB and remove unnecessary 64-bit read/write checks. Signed-off-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: handle queue manager accessDhananjay Phadke1-1/+2
Check the access by tools for hardware queue engine and handle it separately than other block registers, otherwise incorrect data is returned. Signed-off-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16qlcnic: Qlogic ethernet driver for CNA devicesAmit Kumar Salecha1-0/+937
o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.