aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+4
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25r8152: Set memory to all 0xFFs on failed reg readsPrashant Malani1-1/+4
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by: Prashant Malani <pmalani@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23r8152: add a helper function about setting EEEHayes Wang1-91/+77
Add a helper function "rtl_eee_enable" for setting EEE. Besides, I move r8153_eee_en() and r8153b_eee_en(). And, I remove r8152b_enable_eee(), r8153_set_eee(), and r8153b_set_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23r8152: saving the settings of EEEHayes Wang1-30/+50
Saving the settings of EEE to avoid they become the default settings after reset_resume(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22net: usb: Delete unnecessary checks before the macro call “dev_kfree_skb”Markus Elfring2-7/+3
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20r8152: divide the tx and rx bottom functionsHayes Wang1-13/+26
Move the tx bottom function from NAPI to a new tasklet. Then, for multi-cores, the bottom functions of tx and rx may be run at same time with different cores. This is used to improve performance. On x86, Tx/Rx 943/943 Mbits/sec -> 945/944. For arm platform, Tx/Rx: 917/917 Mbits/sec -> 933/933. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19r8152: fix accessing skb after napi_gro_receiveHayes Wang1-1/+1
Fix accessing skb after napi_gro_receive which is caused by commit 47922fcde536 ("r8152: support skb_add_rx_frag"). Fixes: 47922fcde536 ("r8152: support skb_add_rx_frag") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-7/+10
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18net: kalmia: fix memory leaksWenwen Wang1-3/+3
In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through kmalloc(). In the following execution, if the 'status' returned by kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18cx82310_eth: fix a memory leak bugWenwen Wang1-1/+2
In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc(). Then, the execution waits for the firmware to become ready. If the firmware is not ready in time, the execution is terminated. However, the allocated 'dev->partial_data' is not deallocated on this path, leading to a memory leak bug. To fix this issue, free 'dev->partial_data' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16lan78xx: Fix memory leaksWenwen Wang1-3/+5
In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and saved to 'dev->urb_intr'. However, in the following execution, if an error occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix this issue, invoke usb_free_urb() to free the allocated urb before returning from the function. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13r8152: change rx_copybreak and rx_pending through ethtoolHayes Wang1-5/+86
Let the rx_copybreak and rx_pending could be modified by ethtool. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: support skb_add_rx_fragHayes Wang1-15/+105
Use skb_add_rx_frag() to reduce the memory copy for rx data. Use a new list of rx_used to store the rx buffer which couldn't be reused yet. Besides, the total number of rx buffer may be increased or decreased dynamically. And it is limited by RTL8152_MAX_RX_AGG. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: use alloc_pages for rx bufferHayes Wang1-20/+11
Replace kmalloc_node() with alloc_pages() for rx buffer. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: replace array with linking list for rx informationHayes Wang1-57/+125
The original method uses an array to store the rx information. The new one uses a list to link each rx structure. Then, it is possible to increase/decrease the number of rx structure dynamically. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13r8152: separate the rx buffer sizeHayes Wang1-4/+8
The different chips may accept different rx buffer sizes. The RTL8152 supports 16K bytes, and RTL8153 support 32K bytes. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-7/+8
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02r8152: fix typo in register nameKevin Lo1-6/+6
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: usb: pegasus: fix improper read if get_registers() failDenis Kirjanov1-1/+1
get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+1
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26net: usb: qmi_wwan: Add the BroadMobi BM818 cardBob Ham1-0/+1
The BroadMobi BM818 M.2 card uses the QMI protocol Signed-off-by: Bob Ham <bob.ham@puri.sm> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-2/+2
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: usb: Merge cpu_to_le32s + memcpy to put_unaligned_le32Chuhong Yuan5-31/+20
Merge the combo uses of cpu_to_le32s and memcpy. Use put_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22ax88179_178a: Merge memcpy + le32_to_cpus to get_unaligned_le32Chuhong Yuan1-2/+1
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22usbnet: smsc75xx: Merge memcpy + le32_to_cpus to get_unaligned_le32Chuhong Yuan1-6/+3
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: lan78xx: Merge memcpy + lexx_to_cpus to get_unaligned_lexxChuhong Yuan1-8/+4
Merge the combo use of memcpy and lexx_to_cpus. Use get_unaligned_lexx instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18usb: qmi_wwan: add D-Link DWM-222 A2 device IDRogan Dawes1-0/+1
Signed-off-by: Rogan Dawes <rogan@dawes.za.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang1-11/+16
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03r8152: move calling r8153b_rx_agg_chg_indicate()Hayes Wang1-10/+26
r8153b_rx_agg_chg_indicate() needs to be called after enabling TX/RX and before calling rxdy_gated_en(tp, false). Otherwise, the change of the settings of RX aggregation wouldn't work. Besides, adjust rtl8152_set_coalesce() for the same reason. If rx_coalesce_usecs is changed, restart TX/RX to let the setting work. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02net: usb: asix: init MAC address buffersPhong Tran1-3/+3
This is for fixing bug KMSAN: uninit-value in ax88772_bind Tested by https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com syzbot found the following crash on: HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c git tree: kmsan console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000 kernel config: https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a dashboard link: https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e compiler: clang version 9.0.0 (/home/glider/llvm/clang 06d00afa61eef8f7f501ebdb4e8612ea43ec2d78) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000 ================================================================== BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:200 [inline] BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 is_valid_ether_addr include/linux/etherdevice.h:200 [inline] asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728 usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027 generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210 usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432 process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x189c/0x2460 kernel/workqueue.c:2417 kthread+0x4b5/0x4f0 kernel/kthread.c:254 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01r8152: fix the setting of detecting the linking change for runtime suspendHayes Wang1-11/+27
1. Rename r8153b_queue_wake() to r8153_queue_wake(). 2. Correct the setting. The enable bit should be 0xd38c bit 0. Besides, the 0xd38a bit 0 and 0xd398 bit 8 have to be cleared for both enabled and disabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24qmi_wwan: Fix out-of-bounds readBjørn Mork1-1/+1
The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com Cc: Kristian Evensen <kristian.evensen@gmail.com> Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds8-34/+8
Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner8-34/+8
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-14/+89
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-14qmi_wwan: extend permitted QMAP mux_id value rangeReinhard Speyerer1-2/+2
Permit mux_id values up to 254 to be used in qmimux_register_device() for compatibility with ip(8) and the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: avoid RCU stalls on device disconnect when in QMAP modeReinhard Speyerer1-4/+7
Switch qmimux_unregister_device() and qmi_wwan_disconnect() to use unregister_netdevice_queue() and unregister_netdevice_many() instead of unregister_netdevice(). This avoids RCU stalls which have been observed on device disconnect in certain setups otherwise. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: add network device usage statistics for qmimux devicesReinhard Speyerer1-5/+71
Add proper network device usage statistics for qmimux devices instead of reporting all-zero values for them. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14qmi_wwan: add support for QMAP padding in the RX pathReinhard Speyerer1-3/+9
The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver which does not process QMAP padding in the RX path correctly. Add support for QMAP padding to qmimux_rx_fixup() according to the description of the rmnet driver. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 268Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 46 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141334.135501091@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-1/+8
Pull networking fixes from David Miller: 1) Clear up some recent tipc regressions because of registration ordering. Fix from Junwei Hu. 2) tipc's TLV_SET() can read past the end of the supplied buffer during the copy. From Chris Packham. 3) ptp example program doesn't match the kernel, from Richard Cochran. 4) Outgoing message type fix in qrtr, from Bjorn Andersson. 5) Flow control regression in stmmac, from Tan Tee Min. 6) Fix inband autonegotiation in phylink, from Russell King. 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning. 8) Fix usbnet crash after disconnect, from Kloetzke Jan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) usbnet: fix kernel crash after disconnect selftests: fib_rule_tests: use pre-defined DEV_ADDR net-next: net: Fix typos in ip-sysctl.txt ipv6: Consider sk_bound_dev_if when binding a raw socket to an address net: phylink: ensure inband AN works correctly usbnet: ipheth: fix racing condition net: stmmac: dma channel control register need to be init first net: stmmac: fix ethtool flow control not able to get/set net: qrtr: Fix message type of outgoing packets networking: : fix typos in code comments ptp: Fix example program to match kernel. fddi: fix typos in code comments selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test selftests: fib_rule_tests: fix local IPv4 address typo tipc: Avoid copying bytes beyond the supplied data 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function 1/2] net: axienet: use readx_poll_timeout() in mdio wait function vlan: Mark expected switch fall-through macvlan: Mark expected switch fall-through net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query ...
2019-05-21usbnet: fix kernel crash after disconnectKloetzke Jan1-0/+6
When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21usbnet: ipheth: fix racing conditionBernd Eckstein1-1/+2
Fix a racing condition in ipheth.c that can lead to slow performance. Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called. When this happens, the queue is stopped longer than it needs to be, thus reducing network performance. Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order is always correct. In case, usb_submit_urb() fails, the queue is woken up again as callback will not fire. Testing: This racing condition is usually not noticeable, as it has to occur very frequently to slowdown the network. The callback from the USB is usually triggered slow enough, so the situation does not appear. However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10, the we loose the race quite often and the following speedup can be noticed: Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds26-324/+26
Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.236620792@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner24-311/+24
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16aqc111: cleanup mtu related logicIgor Russkikh1-4/+2
Original fix b8b277525e9d was done under impression that invalid data could be written for mtu configuration higher that 16334. But the high limit will anyway be rejected my max_mtu check in caller. Thus, make the code cleaner and allow it doing the configuration without checking for maximum mtu value. Fixes: b8b277525e9d ("aqc111: fix endianness issue in aqc111_change_mtu") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.