aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/vxge/vxge-main.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11s2io/vxge: Move the Exar driversJeff Kirsher1-519/+0
Move the Exar drivers into drivers/net/ethernet/neterion/ and make the necessary Kconfig and Makefile changes. CC: Jon Mason <jdmason@kudzu.us> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21vxge: do vlan cleanupJiri Pirko1-2/+3
- unify vlan and nonvlan rx path - kill vdev->vlgrp and vxge_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21vxge: fix 64 bit access on 32 bit platformsstephen hemminger1-30/+18
Need to add stat_sync wrapper around 64 bit statistic values. Fix wraparound bug in lockup detector where it is unsafely comparing 64 bit value that is not atomic. Since only care about detecting activity just looking at current low order bits will work. Remove unused entries in old vxge_sw_stats structure. Change the error counters to unsigned long since they won't grow so large as to have to be 64 bits. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: vxge: convert to hw_featuresMichał Mirosław1-10/+4
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19vxge: MSIX one shot modeJon Mason1-2/+21
To reduce the possibility of losing an interrupt in the handler due to a race between an interrupt processing and disable/enable of interrupts, enable MSIX one shot. Also, add support for adaptive interrupt coalesing Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Masroor Vettuparambil <masroor.vettuparambil@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: transmit timeout deadlockJon Mason1-0/+1
Use a workqueue to handle the device reset during a transmit timeout, as there can be a deadlock during bringup. Also, set the netif carrier off before the watchdog reset is started to prevent the timeout from reoccurring while still processing the first. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: code cleanup and reorganizationJon Mason1-5/+3
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Arpit Patel <arpit.patel@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: Titan1A detectionJon Mason1-13/+38
Detect if the adapter is Titan or Titan1A, and tune the driver for this hardware. Also, remove unnecessary function __vxge_hw_device_id_get. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: add receive hardware timestampingJon Mason1-3/+5
Add support for enable/disabling hardware timestamping on receive packets via ioctl call. When enabled, the hardware timestamp replaces the FCS in the payload. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: add support for ethtool firmware flashingJon Mason1-0/+2
Add the ability in the vxge driver to flash firmware via ethtool. Updated to include comments from Ben Hutchings. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: cleanup debug printing and assertsJon Mason1-2/+0
Remove all of the unnecessary debug printk indirection and temporary variables for vxge_debug_ll and vxge_assert. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: Wait for Rx to become idle before reseting or closingJon Mason1-0/+2
Wait for the receive traffic to become idle before attempting to close or reset the adapter. To enable the processing of packets while Receive Idle, move the clearing of __VXGE_STATE_CARD_UP bit in vxge_close to after it. Also, modify the return value of the ISR when the adapter is down to IRQ_HANDLED. Otherwise there are unhandled interrupts for the device. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-11vxge: enable rxhashJon Mason1-9/+9
Enable RSS hashing and add ability to pass up the adapter calculated rx hash up the network stack (if feature is available). Add the ability to enable/disable feature via ethtool, which requires that the adapter is not running at the time. Other miscellaneous cleanups and fixes required to get RSS working. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vxge: make functions local and remove dead codestephen hemminger1-58/+1
Use results of make namespacecheck to make functions local and remove code that is not used. Also rename initialize_ethtool_ops to vxge_initialize_ethtool_ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19vxge: Implement 64bit statsEric Dumazet1-1/+0
vxge_get_stats() is racy, since it clears a block of memory (net_stats) possibly still used by other cpus. We can update this driver to full 64bit stats, since ndo_get_stats64() provides a private block to store results, and driver maintains 64bit counters already. We also remove net_stats field from struct vxge_sw_stats Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15vxge: Update copyright informationJon Mason1-2/+2
Update copyright information to reflect the Exar purchase of Neterion Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15vxge: NETIF_F_LLTX removalJon Mason1-12/+3
NETIF_F_LLTX and it's usage of local transmit locks are depricated in favor of using the netdev queue's transmit lock. Remove the local lock and all references to it, and use the netdev queue transmit lock in the transmit completion handler. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15vxge: Remove queue_state referencesJon Mason1-9/+1
Remove queue_state references, as they are no longer necessary. Also, The driver needs to start/stop the queue regardless of which type of steering is enabled. Remove checks for TX_MULTIQ_STEERING only and start/stop for all steering types. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08vxge: Pass correct number of VFs value to pci_sriov_enable().Sreenivasa Honnur1-0/+5
- max_config_dev loadable parameter is set to 0xFF by default. Pass correct number of VFs value to pci_sriov_enable() if max_config_dev is set to its default value. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-29vxge: Fixed MSIX interrupt configuration.Sreenivasa Honnur1-0/+1
- Fixed MSIX interrupt configuration to support non contiguous vpaths in functions. Four msi-x vectors are reserved per vpath internal to the chip. In all, there are 68 msi-x vectors for the 17 vpaths in the chip. In the multi function configurations, non-contiguous vpaths are configured to represent a function. For instance vpaths 0 and 8 can be configured to represent function zero. - If pci_enable_msix fails for the requested vectors, try with a lesser number vectors by reducing the vpath count. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Allow multiple functions with INTA.Sreenivasa Honnur1-1/+0
- Allow multiple functions with INTA. - Removed the condition to allow only one vpath with INTA - Ensure that the alarm bit in titan_mask_all_int register is cleared when driver exits. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05vxge: prefetch skb->dataBenjamin LaHaise1-0/+1
This patch implements prefetching of skb->data from a copy of the pointer in the descriptor (which is already in the L1 cache at this point). This improves netperf rx performance (netperf -L 0,0 -c -H 192.168.254.2 -- -M 131072 -m 131072) by 4.9% on a P4 Xeon host. Signed-off-by: Benjamin LaHaise <ben.lahaise@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05vxge: fix pktgen hangs (don't abuse skb->cb[])Benjamin LaHaise1-1/+2
This patch fixes a case in the transmit completion code which was resulting in pktgen hanging at the end of a run. The cause is due to the fact that the ->cb[] area of an skb cannot be used in a network driver's transmit path, as that area belongs to the network protocol. Pktgen hangs, as it sends out the same packet multiple times, and vxge's use of this area of the skb for a temporary list can only add the packet to the temporary list once (while it may be on the queue many times). The fix is to remove this abuse of skb->cb[]. Instead, skb pointers are placed into a temporary stack array, and then free outside of the tx lock. This retains the smp optimization of doing dev_kfree_skb() outside of the tx lock. Signed-off-by: Benjamin LaHaise <ben.lahaise@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05vxge: Disable fcs stripping.Sreenivasa Honnur1-1/+1
- Disable fcs stripping. The minimum frame size that can be received by the hardware is 57 Bytes. A 64 Byte Ethernet frame with the vlan tag and fcs stripped will result in a 56 Byte frame which will lock up the receive engine. The work around is to disable fcs stripping in the hardware which is done with a firmware upgrade. The fixes are - 1. Ensure that the correct firmware version is used. 2. Decrement the indicated packet length of the receive packet by 4 bytes (FCS length). Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05vxge: Fixes in isr routineSreenivasa Honnur1-0/+1
- Fixes in isr routine Fixed crash with INTA mode during driver unload. Pass hldev to request_irq instead of vdev. Fixed Traffic failure with GRO in INTA mode. Pass the correct napi context to gro functions. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05vxge: Removed ioremap of unused bar addresses and their referencesSreenivasa Honnur1-1/+0
- Removed ioremap of bar1 address Driver needs only bar0 address for register access - Removed references to bar1 and bar2 addresses Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02Neterion: New driver: Main entry pointsRamkrishna Vepa1-0/+557
This patch implements all the driver entry point functions. - Definition of all module loadable paramters. - Implementation of all driver entry point functions. - Changes in this submission - - Fixed compilation error when enabling debug statements - Fixed few warnings when CONFIG_PCI_MSI is not defined - Removed unnecessary volatile variables - Removed compare_ether_addr as it causes unaligned memory access on the sparc64 platform. - Changes in previous submissions - - As per Stephen Hemminger's comments removed the following loadable parameters - gro, rx_& tx max_indicate_pkts, exec_mode, rx & tx pause_enable, tx_steering_type and intr_type. - Added Device ID definition in vxge-main.h instead of include/linux/pci_ids.h file - Reported by David Miller - Incorporated following review comments from Ben Hutchings - NAPI is always enabled (no option to turn it OFF). - Loadable parameters rx_steering_type: This loadable option is removed. ring_blocks: This loadable option is removed. The driver default settings work well in most if not all cases. Another patch to configure these parameters with ethtool will be released in the future. - LRO has been deprecated in favour of GRO - Bill Fink & Dave Miller's comment - Fixed sparse warnings - Reported by Andi Kleen - Removed unused variables Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.