| Age | Commit message (Collapse) | Author | Files | Lines |
|
These registers are used to configure and access page size of HCI.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-10-pkshih@realtek.com
|
|
This is a register-based H2C/C2H interface to exchange data with firmware.
Since the register addresses of 8852A and 8852C are different, add fields
to chip_info to support this.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-9-pkshih@realtek.com
|
|
The HCI_FUNC_EN address of 8852C is different from existing chipset, so
add a chip_info::hci_func_en_addr to fill the address individually.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-8-pkshih@realtek.com
|
|
New chipset uses individual power_{on/off} functions to replace old power
sequences, because it is hard to represent new complicated flow in a
sequence table.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-7-pkshih@realtek.com
|
|
Only 8852A may get wrong chip version if power isn't on, so it needs
additional actions to correct the version. Later chips don't need those.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-6-pkshih@realtek.com
|
|
We have had a struct rtw89_pci_ch_dma_addr to describe register address,
so use it as regular. Since the addresses should be changed dynamically
according to operating mode, I don't change it to be constant.
These changes don't affect the logic, so I put them in this separated
patch.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-5-pkshih@realtek.com
|
|
8852CE use V1 address, and flow is totally shared with 8852AE.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-4-pkshih@realtek.com
|
|
Use this struct to implement chip::ops related to PCI interface.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-3-pkshih@realtek.com
|
|
Add these files, and then I can add specific chip::ops or chip::info along
with the existing chip.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307060457.56789-2-pkshih@realtek.com
|
|
Don't populate the read-only array pktflags on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307223227.165963-1-colin.i.king@gmail.com
|
|
This function exists in phy_common.c as '_rtl92c_phy_set_rf_sleep'.
Switch to the one in common file.
Signed-off-by: Lu Jicong <jiconglu58@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220306090846.28523-1-jiconglu58@gmail.com
|
|
Use the helper function time_is_{before,after}_jiffies() to improve
code readability.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1646018060-61275-1-git-send-email-wangqing@vivo.com
|
|
driver keeps the same survey_info struct for its lifetime around.
This is used because while firmware does help by providing accounting
information of the current channel, it doesn't keep track on the
remaining channels.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/9b9a059b384f49587f4384ba47f01d3fb2115b22.1646250537.git.chunkeey@gmail.com
|
|
the mem_bitmap is kept around for the lifetime of the
driver device. This is a perfect candidate for devm.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/0a79221aa5477501c3def032e95ef8018973a514.1646250537.git.chunkeey@gmail.com
|
|
devres will take care of freeing the input_device once
it is no longer needed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/f81a6ff3b02116c6a448c42eecb546ea5d46c108.1646250537.git.chunkeey@gmail.com
|
|
devres will take care of freeing the hwrng once it is no longer needed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/d1c16490462a9371ab3cc16a018ef5e08382a35e.1646250537.git.chunkeey@gmail.com
|
|
Since ~2010, the driver is allowed to sleep in the ampdu_action
callback thanks to:
commit 85ad181ea788 ("mac80211: allow drivers to sleep in ampdu_action")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/0036538d0933626a1a5eb2c2c3935cf173028926.1646250537.git.chunkeey@gmail.com
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220308070238.19295-1-linmq006@gmail.com
|
|
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220301013246.2052570-1-lv.ruyi@zte.com.cn
|
|
This device with a male Mini-B USB connector is part of Panasonic TVs.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220302211436.8746-1-git@apitzsch.eu
|
|
Start supporting API version 72 for AX devices.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8de72a8ea67f.I66681363afeb34c619379a5989090264fe6b5f2a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Move the ppag code to fw/acpi to keep consistency
with the other ACPI handling we do.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.7f250088b443.I61e64c2758ad178da729ce00428287cc94430eed@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Without trigger data set, no point in any collection.
so check that we have the info for collecting the data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5fb34fb1f0eb.I4d7f2a4d162e80474540c5caf1194ed7d32977bc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Today in the code we have two options for collecting data sync/schedule,
the two options call the same function and can lead to racing in free
resources after done.
So we call only one of two sync/schedule, and in case of sync only
call sync function without also schedule to immediately run as a side
job.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There's a hardware bug in Bz A-step that can be worked
around by using 4k queue size, so do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.10ea0e115d05.Idfb3706133bf3b15f1f68f1145e77e89947449d1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We need to also update the IVAR location, since we've shifted
the bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 571836a02c7b ("iwlwifi: pcie: update sw error interrupt for BZ family")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.bcfb28484e50.I921df6b5134785d7eeb0c934e4a43157c582fa79@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Support debug collection of the platform IMR memory region
only for HW and FW error. This region needs to be collected
as the last region.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5b70e5ba9a41.I502f9b6179b97b163992729edd2b3c5c4ca9e311@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Driver needs to enable IMR which is needed for debug on
certain platforms, so add a device config flag to set it.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.0b96b2760503.I08bc741c8c497a2edbe4784cdab6abd8d04c62f3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Disable IMR region if it is enabled in the TLVs,
but disabled at runtime by the FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.2a696656a161.I99705472a8838121ffaca72977015dc2069549b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There are no shipping firmware versions with this, and there
will also not be in the future, so remove the support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8b3c8b4adf41.Ib3ddb6b250ea2dd72b4ecc88bdd5cffb86af1dcc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The module param "enable_ini" is currently used to be enable/disable ini.
Add the option to configure the FW debug preset via this module param,
by change it type from boolean to an integer.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add a flags bitfield in REDUCED_TX_POWER_CMD, and
send it as is to FW.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.55c2f014f5ee.Iceb632f620de959800f979e212f0dc20240f9d38@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Start supporting API version 71 for AX devices.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.d0898482506f.I2de2f9140c23f39a837f68199bbaf15a20f26abb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Don't populate the read-only array voice_priority on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220222121749.87513-1-colin.i.king@gmail.com
|
|
Replace one-element array with flexible-array member in struct
wmi_aplist_event.
Also, make use of the struct_size() helper and remove unneeded variable
ap_info_entry_size.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1b7889828f23763c034c1558cbab9c8e2066053e.1645736204.git.gustavoars@kernel.org
|
|
Replace one-element array with flexible-array member in struct
wmi_disconnect_event.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/e9957dc53ae48c2f39ae57b0157a67d844b5bc20.1645736204.git.gustavoars@kernel.org
|
|
Replace one-element array with flexible-array member in struct
wmi_connect_event.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/290a0cb7bddd813a6a96a59853880e66917aa03d.1645736204.git.gustavoars@kernel.org
|
|
Replace one-element array with flexible-array member in struct
wmi_channel_list_reply.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/f3f9728a1dfc3767340f25a963be374e2ef5d8ad.1645736204.git.gustavoars@kernel.org
|
|
Replace one-element array with flexible-array member in struct
wmi_start_scan_cmd. Also, make use of the struct_size() helper.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/8b33c6d86a6bd40b5688cf118b4b35850db8d8c7.1645736204.git.gustavoars@kernel.org
|
|
Replace one-element array with flexible-array member in struct
wmi_begin_scan_cmd. Also, make use of the struct_size() helper.
This issue was found with the help of Coccinelle and audited and fixed,
manually.
Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1ef801ea24475501fa0f296cb5435a440135206e.1645736204.git.gustavoars@kernel.org
|
|
To work properly in 6G band, declare HE 6G capabilities. Without this fix,
it can only TX/RX with OFDM rates.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307012741.6371-1-pkshih@realtek.com
|
|
Bit 2 and 3 are reserved on 5/6 GHz and bit 1 is reserved on 2.4 GHz,
so the driver should only set the non-reserved bits according
to band.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220301004331.6621-1-pkshih@realtek.com
|
|
We found management frames get stuck when wifi chip
enters low ps mode. So we add one notify wake function
to trigger wifi chip into normal mode before forwarding
management frames.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-3-pkshih@realtek.com
|
|
Declare this function allows us to use customized scanning policy, so
each scan takes less time. This is a similar implementation to hw_scan
in rtw88, except that we offload more items to firmware and extend the
maximum IE length. For backward compatibility, we fallback to sw_scan
when firmware does not support this feature.
Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-2-pkshih@realtek.com
|
|
This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.
Users are reporting regressions in regulatory domain detection and
channel availability.
The problem this was trying to resolve was fixed in firmware anyway:
QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552
Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi017@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: libertas-dev@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: Wright Feng <wright.feng@infineon.com>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Maya Erez <merez@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Propagate the value to the user space so it can understand
if the operation failed or not.
Fixes: bfcfdb59b669 ("iwlwifi: mvm: add vendor commands needed for iwlmei")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|