aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-11-02wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()Wen Gong1-5/+1
(cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next as users are seeing this bug more now, also cc stable) Running this test in a loop it is easy to reproduce an rtnl deadlock: iw reg set FI ifconfig wlan0 down What happens is that thread A (workqueue) tries to update the regulatory: try to acquire the rtnl_lock of ar->regd_update_work rtnl_lock+0x17/0x20 ath11k_regd_update+0x15a/0x260 [ath11k] ath11k_regd_update_work+0x15/0x20 [ath11k] process_one_work+0x228/0x670 worker_thread+0x4d/0x440 kthread+0x16d/0x1b0 ret_from_fork+0x22/0x30 And thread B (ifconfig) tries to stop the interface: try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop(). ifconfig 3109 [003] 2414.232506: probe: ath11k_mac_op_stop: (ffffffffc14187a0) drv_stop+0x30 ([mac80211]) ieee80211_do_stop+0x5d2 ([mac80211]) ieee80211_stop+0x3e ([mac80211]) __dev_close_many+0x9e ([kernel.kallsyms]) __dev_change_flags+0xbe ([kernel.kallsyms]) dev_change_flags+0x23 ([kernel.kallsyms]) devinet_ioctl+0x5e3 ([kernel.kallsyms]) inet_ioctl+0x197 ([kernel.kallsyms]) sock_do_ioctl+0x4d ([kernel.kallsyms]) sock_ioctl+0x264 ([kernel.kallsyms]) __x64_sys_ioctl+0x92 ([kernel.kallsyms]) do_syscall_64+0x3a ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms]) __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) The sequence of deadlock is: 1. Thread B calls rtnl_lock(). 2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B. 3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock. Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Cc: <stable@vger.kernel.org> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [kvalo: improve commit log] Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-02wifi: ath11k: Fix QCN9074 firmware boot on x86Tyler J. Stachecki1-1/+1
The 2.7.0 series of QCN9074's firmware requests 5 segments of memory instead of 3 (as in the 2.5.0 series). The first segment (11M) is too large to be kalloc'd in one go on x86 and requires piecemeal 1MB allocations, as was the case with the prior public firmware (2.5.0, 15M). Since f6f92968e1e5, ath11k will break the memory requests, but only if there were fewer than 3 segments requested by the firmware. It seems that 5 segments works fine and allows QCN9074 to boot on x86 with firmware 2.7.0, so change things accordingly. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
2022-11-01wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()Dokyung Song1-0/+4
This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
2022-11-01wifi: airo: do not assign -1 to unsigned charJason A. Donenfeld1-4/+14
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, we get a warning when assigning the unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a `u8`, which matches the struct's type, and then check each call to hex_to_bin() before casting. Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com
2022-10-21wifi: mac80211_hwsim: fix debugfs attribute ps with rc table supportJonas Jelonek1-0/+5
Fixes a warning that occurs when rc table support is enabled (IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode is changed via the exported debugfs attribute. When the PS mode is changed, a packet is broadcasted via hwsim_send_nullfunc by creating and transmitting a plain skb with only header initialized. The ieee80211 rate array in the control buffer is zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates is called for the skb with sta parameter set to NULL and thus no ratetbl can be used. The final rate array then looks like [-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate. The issue is fixed by setting the count of the first rate with idx '0' to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-21wifi: rt2x00: use explicitly signed or unsigned typesJason A. Donenfeld13-58/+58
On some platforms, `char` is unsigned, but this driver, for the most part, assumed it was signed. In other places, it uses `char` to mean an unsigned number, but only in cases when the values are small. And in still other places, `char` is used as a boolean. Put an end to this confusion by declaring explicit types, depending on the context. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.com
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds8-9/+9
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-13Merge tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds8-19/+33
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ...
2022-10-13Merge branch 'cve-fixes-2022-10-13'Johannes Berg1-0/+2
Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld4-5/+5
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld1-1/+1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld2-2/+2
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warningKalle Valo1-2/+3
Linaro reported stringop-overread warnings in ath11k (this is one of many): drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread] My further investigation showed that these warnings happen on GCC 11.3 but not with GCC 12.2, and with only the kernel config Linaro provided: https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be the reason triggering these warnings with GCC 11. Nobody else has reported this so this seems to be quite rare corner case. I don't know what specific commit started emitting this warning so I can't provide a Fixes tag. The function hasn't been touched for a year. I decided to workaround this by converting the pointer to a new array in stack, and then copying the data to the new array. It's only 16 bytes anyway and this is executed during association, so not in a hotpath. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
2022-10-11wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases)Jose Ignacio Tornos Martinez1-0/+2
BUGs like this are still reproducible: [ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300). [ 31.521544] ------------[ cut here ]------------ [ 31.526248] kernel BUG at lib/list_debug.c:30! [ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7 [ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b [ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7 [ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286 [ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000 [ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff [ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff [ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300 [ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c [ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000 [ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0 [ 31.637539] Call Trace: [ 31.639936] <TASK> [ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm] [ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211] ... So, it is necessary to extend the applied solution with commit 14a3aacf517a9 ("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue") to all other cases where the station queues are invalidated and the related lists are not emptied. Because, otherwise as before, if some new element is added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce the same commented BUG. That is, in order to avoid this problem completely, we must also remove the related lists for the other cases when station queues are invalidated. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
2022-10-11wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921Felix Fietkau4-7/+10
Checking the relevant rxd bits for the checksum information only indicates if the checksum verification was performed by the hardware and doesn't show actual checksum errors. Checksum errors are indicated in the info field of the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY by checking the extra bits as well. Those bits are only passed to the driver for MMIO devices at the moment, so limit checksum offload to those. Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support") Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support") Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
2022-10-11wifi: mt76: fix receiving LLC packets on mt7615/mt7915Felix Fietkau2-8/+8
When 802.3 decap offload is enabled, the hardware indicates header translation failure, whenever either the LLC-SNAP header was not found, or a VLAN header with an unregcognized tag is present. In that case, the hardware inserts a 2-byte length fields after the MAC addresses. For VLAN packets, this tag needs to be removed. However, for 802.3 LLC packets, the length bytes should be preserved, since there is no separate ethertype field in the data. This fixes an issue where the length field was omitted for LLC frames, causing them to be malformed after hardware decap. Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
2022-10-10Merge tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+2
Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10wifi: mac80211_hwsim: avoid mac80211 warning on bad rateJohannes Berg1-0/+2
If the tool on the other side (e.g. wmediumd) gets confused about the rate, we hit a warning in mac80211. Silence that by effectively duplicating the check here and dropping the frame silently (in mac80211 it's dropped with the warning). Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-06wifi: mt76: fix rate reporting / throughput regression on mt7915 and newerFelix Fietkau1-2/+8
mt7915 and newer need to report the rate_info that's stored in wcid->rate, since they don't fill info->status.rates. Cc: Jonas Jelonek <jelonek.jonas@gmail.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsP0znm9pS-MiKtyxTXR7XiyFVqen0qzNpicGHDZKCzbwg@mail.gmail.com/ Fixes: 44fa75f207d8 ("mac80211: extend current rate control tx status API") Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927093823.6007-1-nbd@nbd.name
2022-09-30Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-nextJakub Kicinski214-2273/+8703
Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29wifi: rtl8xxxu: Improve rtl8xxxu_queue_selectBitterblue Smith1-3/+2
Remove the unused ieee80211_hw* parameter, and pass ieee80211_hdr* instead of relying on skb->data having the right value at the time the function is called. This doesn't change the functionality at all. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2af44c28-1c12-46b9-85b9-011560bf7f7e@gmail.com
2022-09-29wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAMBitterblue Smith1-0/+49
ieee80211_tx_queue_params.aifs is not supposed to be written directly to the REG_EDCA_*_PARAM registers. Instead process it like the vendor drivers do. It's kinda hacky but it works. This change boosts the download speed and makes it more stable. Tested with RTL8188FU but all the other supported chips should also benefit. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/038cc03f-3567-77ba-a7bd-c4930e3b2fad@gmail.com
2022-09-29wifi: rtl8xxxu: gen2: Enable 40 MHz channel widthBitterblue Smith2-9/+18
The module parameter ht40_2g was supposed to enable 40 MHz operation, but it didn't. Tell the firmware about the channel width when updating the rate mask. This makes it work with my gen 2 chip RTL8188FU. I'm not sure if anything needs to be done for the gen 1 chips, if 40 MHz channel width already works or not. They update the rate mask with a different structure which doesn't have a field for the channel width. Also set the channel width correctly for sta_statistics. Fixes: f653e69009c6 ("rtl8xxxu: Implement basic 8723b specific update_rate_mask() function") Fixes: bd917b3d28c9 ("rtl8xxxu: fill up txrate info for gen1 chips") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3a950997-7580-8a6b-97a0-e0a81a135456@gmail.com
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski11-19/+12
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28wifi: rtw89: 8852b: configure DLE memPing-Ke Shih3-0/+35
Configure DLE (data link engine) memory size for operating modes. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-10-pkshih@realtek.com
2022-09-28wifi: rtw89: check DLE FIFO size with reserved sizePing-Ke Shih5-2/+20
For SCC mode, some FIFO are reserved, so compare the quantity after minus the reserved size. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-9-pkshih@realtek.com
2022-09-28wifi: rtw89: mac: correct register of report IMRPing-Ke Shih5-1/+5
The register of report IMR is chip specific, so add a field to strut to correct them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-8-pkshih@realtek.com
2022-09-28wifi: rtw89: pci: set power cut closed for 8852bePing-Ke Shih1-1/+1
Entering LPS with PCIe APHY power cut closed would cause PCIe link issue. To avoid the combinational issue, keep PCIe APHY power cut always on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-7-pkshih@realtek.com
2022-09-28wifi: rtw89: pci: add to do PCI auto calibrationPing-Ke Shih2-0/+21
8852be needs this with n times calibration to correct hardware clock. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-6-pkshih@realtek.com
2022-09-28wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rfPing-Ke Shih7-12/+84
Implement to power on/off BB and RF via MAC registers. Add return type of chip_ops::disable_bb_rf, because it could fail to disable. Also, correct naming of register 0x0200 used by the ops as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-5-pkshih@realtek.com
2022-09-28wifi: rtw89: add DMA busy checking bits to chip infoPing-Ke Shih5-8/+21
8852B has less DMA channels, so its checking bits are different from other chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-4-pkshih@realtek.com
2022-09-28wifi: rtw89: mac: define DMA channel mask to avoid unsupported channelsPing-Ke Shih5-0/+27
Six channels are unsupported by 8852b, so mask them out to prevent to access undefined registers in this chip. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-3-pkshih@realtek.com
2022-09-28wifi: rtw89: pci: mask out unsupported TX channelsPing-Ke Shih5-0/+38
8852BE doesn't support some TX channels, so mask them out, or it access undefined registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927062611.30484-2-pkshih@realtek.com
2022-09-28iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-2/+2
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/223 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/YzIvzc0jsYLigO8a@work
2022-09-28ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-1/+1
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/220 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/YzIeULWc17XSIglv@work
2022-09-28wifi: iwlwifi: Track scan_cmd allocation size explicitlyKees Cook5-7/+16
In preparation for reducing the use of ksize(), explicitly track the size of scan_cmd allocations. This also allows for noticing if the scan size changes unexpectedly. Note that using ksize() was already incorrect here, in the sense that ksize() would not match the actual allocation size, which would trigger future run-time allocation bounds checking. (In other words, memset() may know how large scan_cmd was allocated for, but ksize() will return the upper bounds of the actually allocated memory, causing a run-time warning about an overflow.) Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Miri Korenblit <miriam.rachel.korenblit@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220923220853.3302056-1-keescook@chromium.org
2022-09-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo65-369/+1750
ath.git patches for v6.1. Major changes: ath11k * cold boot calibration support on WCN6750 * Target Wake Time (TWT) debugfs support for STA interface * support to connect to a non-transmit MBSSID AP profile * enable remain-on-channel support on WCN6750 * implement SRAM dump debugfs interface * enable threaded NAPI on all hardware * WoW support for WCN6750 * support to provide transmit power from firmware via nl80211 * support to get power save duration for each client * spectral scan support for 160 MHz wcn36xx * add SNR from a received frame as a source of system entropy
2022-09-27brcmfmac: Remove the call to "dtim_assoc" IOVARRamesh Rangavittal1-25/+1
When STA roams from one AP to another, after roam is complete, host driver tries to get TIM information from firmware. This is no longer supported in the firmware & hence, this call will always fail. This failure results in the below message being displayed on the console all the time when roam is done. ieee80211 phy0: brcmf_update_bss_info: wl dtim_assoc failed (-52) Changes ensure that the host driver will no longer try to get TIM information from firmware. Signed-off-by: Ramesh Rangavittal <ramesh.rangavittal@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-5-ian.lin@infineon.com
2022-09-27brcmfmac: increase dcmd maximum buffer sizeLo(Double)Hsiang Lo1-1/+3
Increase dcmd maximum buffer size to match firmware configuration for new chips. Signed-off-by: Lo(Double)Hsiang Lo <double.lo@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-4-ian.lin@infineon.com
2022-09-27brcmfmac: Support 89459 pcieAlexander Prutskov3-1/+10
Adds support of 89459 chip pcie device and save restore support. Signed-off-by: Alexander Prutskov <alep@cypress.com> Signed-off-by: Joseph chuang <jiac@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-3-ian.lin@infineon.com
2022-09-27brcmfmac: increase default max WOWL patterns to 16Ryohei Kondo1-1/+1
4373 has support of 16 WOWL patterns thus increasing the default value Signed-off-by: Ryohei Kondo <ryohei.kondo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-2-ian.lin@infineon.com
2022-09-27cw1200: fix incorrect check to determine if no element is found in listXiaomeng Tong1-8/+10
The bug is here: "} else if (item) {". The list iterator value will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found in list. Use a new value 'iter' as the list iterator, while use the old value 'item' as a dedicated pointer to point to the found element, which 1. can fix this bug, due to now 'item' is NULL only if it's not found. 2. do not need to change all the uses of 'item' after the loop. 3. can also limit the scope of the list iterator 'iter' *only inside* the traversal loop by simply declaring 'iter' inside the loop in the future, as usage of the iterator outside of the list_for_each_entry is considered harmful. https://lkml.org/lkml/2022/2/17/1032 Fixes: a910e4a94f692 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220413091723.17596-1-xiam0nd.tong@gmail.com
2022-09-26wifi: ath11k: Fix deadlock during WoWLAN suspendBaochen Qiang1-6/+6
We are seeing system hangs during WoWLAN suspend, and get below two stacks: Stack1: [ffffb02cc1557b20] __schedule at ffffffff8bb10860 [ffffb02cc1557ba8] schedule at ffffffff8bb10f24 [ffffb02cc1557bb8] schedule_timeout at ffffffff8bb16d88 [ffffb02cc1557c30] wait_for_completion at ffffffff8bb11778 [ffffb02cc1557c78] __flush_work at ffffffff8b0b30cd [ffffb02cc1557cf0] __cancel_work_timer at ffffffff8b0b33ad [ffffb02cc1557d60] ath11k_mac_drain_tx at ffffffffc0c1f0ca [ath11k] [ffffb02cc1557d70] ath11k_wow_op_suspend at ffffffffc0c5201e [ath11k] [ffffb02cc1557da8] __ieee80211_suspend at ffffffffc11e2bd3 [mac80211] [ffffb02cc1557dd8] wiphy_suspend at ffffffffc0f901ac [cfg80211] [ffffb02cc1557e08] dpm_run_callback at ffffffff8b75118a [ffffb02cc1557e38] __device_suspend at ffffffff8b751630 [ffffb02cc1557e70] async_suspend at ffffffff8b7519ea [ffffb02cc1557e88] async_run_entry_fn at ffffffff8b0bf4ce [ffffb02cc1557ea8] process_one_work at ffffffff8b0b1a24 [ffffb02cc1557ee0] worker_thread at ffffffff8b0b1c4a [ffffb02cc1557f18] kthread at ffffffff8b0b9cb8 [ffffb02cc1557f50] ret_from_fork at ffffffff8b001d32 Stack2: [ffffb02cc00b7d18] __schedule at ffffffff8bb10860 [ffffb02cc00b7da0] schedule at ffffffff8bb10f24 [ffffb02cc00b7db0] schedule_preempt_disabled at ffffffff8bb112b4 [ffffb02cc00b7db8] __mutex_lock at ffffffff8bb127ea [ffffb02cc00b7e38] ath11k_mgmt_over_wmi_tx_work at ffffffffc0c1aa44 [ath11k] [ffffb02cc00b7ea8] process_one_work at ffffffff8b0b1a24 [ffffb02cc00b7ee0] worker_thread at ffffffff8b0b1c4a [ffffb02cc00b7f18] kthread at ffffffff8b0b9cb8 [ffffb02cc00b7f50] ret_from_fork at ffffffff8b001d32 From the first stack, ath11k_mac_drain_tx calls cancel_work_sync(&ar->wmi_mgmt_tx_work) and waits all packets to be sent out or dropped. However, we find from Stack2 that this work item is blocked because ar->conf_mutex is already held by ath11k_wow_op_suspend. Fix this issue by moving ath11k_mac_wait_tx_complete to the start of ath11k_wow_op_suspend where ar->conf_mutex has not been acquired. And this change also makes the logic in ath11k_wow_op_suspend match the logic in ath11k_mac_op_start and ath11k_mac_op_stop. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919021435.2459-1-quic_bqiang@quicinc.com
2022-09-26wifi: ath11k: Remove redundant ath11k_mac_drain_txBaochen Qiang1-1/+0
ath11k_mac_drain_tx is already called in ath11k_mac_wait_tx_complete, no need to call it again. So remove it. This is found in code review. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919020259.1746-1-quic_bqiang@quicinc.com
2022-09-26wifi: ath11k: Add spectral scan support for 160 MHzTamizh Chelvam Raja4-0/+31
There are two types of 160 MHz spectral scan support mentioned below 1. Fragmented approach 2. Single event approach In this fragmented approach, single 160 MHz will be split as two 80 MHz buffer. First fft sample buffer will contain spectral scan result of primary 80 MHz and the second fft sample buffer will contain secondary 80 MHz and here cfreq1 and cfreq2 will be mentioned. In case of 160 MHz on 36th channel will contain cfreq1 as 5210 and cfreq2 as 5290. Chipsets which support this approach are IPQ8074/IPQ6018. Replacing freq1 with freq2 in every secondary sepctral scan event to distinguish between two different 80 MHz spectral event data. In the 2nd approach each fft sample buffer will contain spectral scan result for whole 160 MHz by mentioning cfreq1 as 5250 which is center frequency of whole 160 MHz. Chipset which support this approach is QCN9074. Host will receive spectral event from target for every 5 fft samples. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01120-QCAHKSWPL-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01120-QCAHKSWP Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725055001.15194-1-quic_tamizhr@quicinc.com
2022-09-26wifi: ath11k: Add support to get power save duration for each clientVenkateswara Naralasetty7-0/+473
Add support to get the following power save information through debugfs interface, * Current ps state of the peer * Time duration since the peer is in power save * Total duration of the peer spent in power save Above information is helpful in debugging the issues with power save clients. This patch also add trace log support for PS timekeeper to track the PS state change of the peers alongs with the peer MAC address and timestamp. Use the below commands to get the above power save information, To know the time_since_station_in_power_save: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/ XX:XX:XX:XX:XX:XX/current_ps_duration To know power_save_duration: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/ XX:XX:XX:XX:XX:XX/total_ps_duration To reset the power_save_duration of all stations connected to AP: echo 1 > /sys/kernel/debug/ieee80211/phyX/ath11k/reset_ps_duration To enable/disable the ps_timekeeper: echo Y > /sys/kernel/debug/ieee80211/phyX/ath11k/ps_timekeeper_enable Y = 1 to enable and Y = 0 to disable. To record PS timekeeer logs after enabling ps_timekeeper: trace-cmd record -e ath11k_ps_timekeeper Tested-on: Tested-on: IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725054601.14719-1-quic_tamizhr@quicinc.com
2022-09-24wifi: ath11k: fix peer addition/deletion error on sta band migrationChristian 'Ansuel' Marangi1-4/+26
This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-24wifi: rtw89: support for enable/disable MSDU aggregationKuan-Chung Chen1-0/+9
To enable/disable amsdu in set_tid_config, and currently only support to configure all tids (==0xff) for AMSDU, not individual tid. The command example is: iw wlan0 set tidconf tids 0xff amsdu off iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0xff amsdu on Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012737.15091-1-pkshih@realtek.com
2022-09-24wifi: rtw89: disable 26-tone RU HE TB PPDU transmissionsKuan-Chung Chen3-0/+47
Align with the spec of 802.11ax, follow the conditions for not responding with an HE TB PPDU. When there are OBSS that cannot interpret 26-tone RU transmissions, we should disable such transmissions. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012719.15037-1-pkshih@realtek.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.