aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2016-06-04brcmfmac: Fix 'did not remove int handler' warningChristian Daudt2-7/+12
brcmf_sdiod_intr_unregister call that removes both func1 and func2 interrupt handlers only called when brcmf_ops_sdio_remove is called for func 1 (which is the 2nd call) but sdio is expecting it to be removed at the end of each sdio_remove call. This is causing 'rmmod bcmrfmac' on a 4356-sdio chip to complain with: WARNING: driver brcmfmac did not remove its interrupt handler! The modification makes calling brcmf_sdiod_intr_unregister multiple times harmless by clearing the variables that track if interrupt handlers have been installed, and then calls it on every brcmf_ops_sdio_remove call instead of just remove for func 1. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-04brcmfmac: Fix kernel oops in failed chip_attachChristian Daudt2-13/+18
When chip attach fails, brcmf_sdiod_intr_unregister is being called but that is too early as sdiodev->settings has not been set yet nor has brcmf_sdiod_intr_register been called. Change to use oob_irq_requested + newly created sd_irq_requested to decide on what to unregister at intr_unregister time. Steps to reproduce problem: - modprobe brcmfmac using buggy FW - rmmod brcmfmac - modprobe brcmfmac again. If done with a buggy firmware, brcm_chip_attach will fail on the 2nd modprobe triggering the call to intr_unregister and the kernel oops when attempting to de-reference sdiodev->settings->bus.sdio which has not yet been set. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-04carl9170: Clarify kconfig textLauri Kasanen1-5/+3
The previous text was confusing, leading readers to think this driver was a duplicate, and so didn't need to be enabled. After the removal of the older staging driver, this is the only driver in mainline for these devices. Signed-off-by: Lauri Kasanen <cand@gmx.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-03brcmfmac: add eth_type_trans back for PCIe full dongleFranky Lin1-0/+2
A regression was introduced in commit 9c349892ccc9 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170 [<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120 [<ffffffff814c5467>] netif_rx_ni+0x27/0xc0 [<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac] [<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0 [<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70 [<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [<ffffffff810d60d0>] irq_thread_fn+0x20/0x50 [<ffffffff810d63ad>] irq_thread+0x12d/0x1c0 [<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0 [<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81098ea8>] kthread+0xd8/0xf0 [<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40 [<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP <ffff88049e127ca0> CR2: 0000000000000048 Fixes: 9c349892ccc9 ("brcmfmac: revise handling events in receive path") Reported-by: Rafal Milecki <zajec5@gmail.com> Reported-by: Grey Christoforo <grey@christoforo.net> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> [arend@broadcom.com: rephrased the commit message] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-02ath10k: enable ipq4019 device probe in ahb moduleRaja Mani1-6/+3
All the necessary patches to make wifi running (over AHB) on ipq4019 SoC are ready now. It's good to enable ipq4019 wifi device probing in ahb module and remove work in progress debug print. Device tree change is there in the public review by below commit message "qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree" Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: add pdev param support to enable/disable btcoexRajkumar Manoharan5-3/+46
10.4 firmware has support to enable or disable btcoex functionality without reloading firmware via wmi pdev param. Add provision to send pdev param command via existing btcoex knob. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAMRajkumar Manoharan2-0/+8
This feature flag will be used for firmware to support BT-Coex feature without reloading firmware via WMI pdev param. To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of extended resource config should be enabled always. This firmware IE is used to configure WMI_COEX_GPIO_SUPPORT. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: update module descriptionRajkumar Manoharan2-2/+2
Update module description to advertise all supported QCA 802.11ac devices. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: remove unused phy_mode_to_bandRajkumar Manoharan1-28/+0
Remove unused inline function phy_mode_to_band. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: fix operating irq mode for ahb deviceRajkumar Manoharan1-0/+2
Earlier when operating irq mode is legacy, interrupts are disabled and re-enabled based on num_msi_intrs. commit cfe9011a05a8 ("ath10k: remove MSI range support") replaced num_msi_intrs by oper_irq_mode. Since oper_irq_mode is not initialized for ahb devices (i.e qca4019), device boot up is failed during probe. Fixes: cfe9011a05a8 ("ath10k: remove MSI range support") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: fix error while writing 'simulate_fw_crash' debugfsMohammed Shafi Shajakhan1-8/+6
Fix invalid argument error while writing 'simulate_fw_crash', though the funcionality is working fine we get an error 'invalid argument' because 'count' value is not returned properly (no reason to reduce the count value for removing the newline) Fixes the below write error: /sys/kernel/debug/ieee80211/phy0/ath10k# echo hw-restart > simulate_fw_crash -bash: echo: write error: Invalid argument Also move the 'conf_mutex' as it is really not required for fetching the userspace buffer. Reported-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-02ath10k: fix diag_read to collect data for larger memoryAshok Raj Nagarajan1-12/+16
diag_read uses dma_alloc_coherent to allocate memory requested by the caller. If this memory requested is larger, more than DIAG_TRANSFER_LIMIT (2K), then it is likely that we may not get the requested memory and we would fail. To solve this, request dma_alloc_coherent for only DIAG_TRANSFER_LIMIT, and reuse this buffer multiple times as needed to copy the data requested in smaller chunks of size not more than DIAG_TRANSFER_LIMIT. Previously we were reading into the caller's only after getting the complete requested data. Fixes: 68c03249f388 ('ath10k: convert pci_alloc_consistent() to dma_alloc_coherent()') Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-01Merge tag 'mac80211-for-davem-2016-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211David S. Miller1-0/+1
Johannes Berg says: ==================== Three small fixes for the current cycle: * missing netlink attribute check in hwsim wmediumd (Martin) * fast xmit structure alignment fix (Felix) * mesh path flush/synchronisation fix (Bob) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNALMartin Willi1-0/+1
A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-31mac80211_hwsim: Allow managing radios from non-initial namespacesMartin Willi1-3/+94
While wiphys can be moved into network namespaces over nl80211, the creation and removal of hwsim radios is currently limited to the initial namespace. This patch allows management of namespaced radios from the owning namespace by setting genetlink netnsok. To prevent two arbitrary namespaces to communicate over the simulated shared medium, radios are separated by netgroups. Each radio created in the same namespace lives in the same netgroup and hence can communicate with other radios in that group. When moving radios to other namespaces, the netgroup is preserved, so two radios having the same netgroup can communicate even if not in the same namespace; This allows a controlling namespace to create radios and move them to other namespaces for communication. When a net namespace owning a radio exits, the radio is destroyed unless it was created in the initial network namespace. This keeps the previous behavior by returning them to the init namespace, but prevents unprivileged users from creating radios in the initial namespace. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-28ath9k: Proper TX99 interrupt ref countEduardo Abinader1-1/+0
On TX99 mode, instead of assuming interrupt mask non ATH9K_INT_GLOBAL, let ath9k_hw_disable_interrupts proper set interrupt ref count. This prevents some PCI PERR occurring specialy when setting 11b and n rates. Signed-off-by: Eduardo Abinader <eduardo.abinader@riverbed.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28ath6kl: simplify logical conditionHeinrich Schuchardt1-2/+1
x <= 7 implies x < 8. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28ath6kl: fix typoJulia Lawall1-1/+1
firmare -> firmware Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: align wil log functions to wil_dbg_ratelimited implementationMaya Erez1-26/+20
Change the implementation of wil log functions for consistency with __wil_dbg_ratelimited. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: add pm_notify handlingMaya Erez4-4/+98
Adding pm_notify to allow the following: 1. Check if suspend is allowed in an earlier stage to prevent starting the suspend procedure in case it is not allowed 2. Notify the platform driver on the suspend request Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: fix dma mapping error cleanup in __wil_tx_vring_tsoMaya Erez1-1/+1
In case we fail to map one of the TSO SKB fragments, we need to clear all the mapped descriptors, from swhead to swhead+descs_used-1. Change the desc index calculation to i = (swhead + descs_used - 1) % vring->size; to prevent unmpping of (swhead + descs_used) descriptor that wasn't mapped. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: protect wil_vring_fini_tx in parallel to tx completionsMaya Erez1-0/+14
napi_synchronize is called before releasing the vring, with the assumption that setting txdata->enabled to 0 will prevent handling of this vring in the next scheduled napi. To guarantee this assumption, a memory barrier is added after disabling the txdata. In addition, as the ctx is zeroed in wil_tx_complete after this descriptor is handled (protected by wmb), ctx needs to be checked before releasing this descriptor in wil_vring_free. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: guarantee safe access to rx descriptors shared memoryMaya Erez1-0/+6
add memory barrier after allocating new rx descriptors, before updating the hwtail. This will guarantee that all writes to descriptors (shared memory) are done before committing them to HW. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: fix race conditions between TX send and completionMaya Erez1-0/+20
There are 2 possible race conditions, both are solved by addition of memory barrier: 1. wil_tx_complete reads the swhead to determine if the vring is empty. In case the swhead was updated before the descriptor update was performed in __wil_tx_vring/__wil_tx_vring_tso, the completion loop will not end and as the DU bit may still be set from a previous run, this skb can be handled as completed before it was sent, which will lead to double free of the same SKB. 2. __wil_tx_vring/__wil_tx_vring_tso calculate the number of available descriptors according to the swtail. In case the swtail is updated before memset of ctx to zero is completed, we can handle this descriptor while later on ctx is zeroed. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28ath9k: allow tx99 for ar9002 based cardsEduardo Abinader1-1/+1
As there is current support for ar9002 tx99 mode, just allow to init debugfs and enable tx99. Signed-off-by: Eduardo Abinader <eduardo.abinader@riverbed.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28ath9k: Remove empty test conditionEduardo Abinader1-2/+1
Just some code cleanup to remove an empty if clause. Signed-off-by: Eduardo Abinader <eduardo.abinader@riverbed.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann1-2/+2
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27rtlwifi: Fix scheduling while atomic error from commit 49f86ec21c01Larry Finger1-3/+3
Commit 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [<ffffffff815c2b39>] __schedule+0x899/0xad0 [<ffffffff815c2dac>] schedule+0x3c/0x90 [<ffffffff815c5bb2>] schedule_hrtimeout_range_clock+0xa2/0x120 [<ffffffff810e8b80>] ? hrtimer_init+0x120/0x120 [<ffffffff815c5ba6>] ? schedule_hrtimeout_range_clock+0x96/0x120 [<ffffffff815c5c43>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff815c568f>] usleep_range+0x4f/0x70 [<ffffffffa0667218>] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [<ffffffffa06dd0e7>] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") Reported-by: James Feeney <james@nurealm.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: James Feeney <james@nurealm.net> Cc: Stable <stable@vger.kernel.org> [4.6+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-27brcmfmac: add fallback for devices that do not report per-chain valuesJaap Jan Meijer1-0/+16
If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a6de9 ("brcmfmac: rework .get_station() callback") Signed-off-by: Jaap Jan Meijer <jjmeijer88@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-24ath10k: fix legacy rate packet debug messagesMohammed Shafi Shajakhan1-1/+2
Legacy rate packets may not necessarily be having a rx status flag of '0' always, for example management frame have flags like RX_FLAG_ONLY_MONITOR / RX_FLAG_MACTIME_END also set Just check 'VHT' and 'HT' flags are not set , and simply clasify it as legacy rate packets Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: reduce warning messages during rx without proper channel contextMohammed Shafi Shajakhan1-1/+1
WARN_ON_ONCE when we receive packets for self peer when mac80211 had not assigned a proper channel context. This scenario happens in QCA4019 when we start the AP via hostapd in background and start it once again in the background without killing the previous instance! This happens intermittently when we start / stop hostapd in a while loop (incase the hostapd is not properly killed). This results in mac80211 chancontext to be unassigned, while the self peer continuous receive packets in target operating channel. This results in lot of call traces in the rx path. Make this as a WARN_ON_ONCE to avoid flooding the console which result in rebooting low memory systems, while still reporting the warning once that we are receiving packets in target operating channel and to indicate that something is happening which is not the expected result. WARNING: CPU: 0 PID: 0 at ath/ath10k/htt_rx.c:803 [<c0318838>] (warn_slowpath_null) from [<bf4a0104>] (ath10k_htt_rx_h_channel+0xe0/0x1b8 [ath10k_core]) [<bf4a0104>] (ath10k_htt_rx_h_channel [ath10k_core]) from [<bf4a025c>] (ath10k_htt_rx_h_ppdu+0x80/0x288 [ath10k_core]) [<bf4a025c>] (ath10k_htt_rx_h_ppdu [ath10k_core]) from [<bf4a1a9c>] (ath10k_htt_txrx_compl_task+0x724/0x9d4 [ath10k_core]) [<bf4a1a9c>] (ath10k_htt_txrx_compl_task [ath10k_core]) Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: improve tx schedulingMichal Kazior3-6/+7
Recent changes revolving around implementing wake_tx_queue support introduced a significant performance regressions on some (slower, uni-proc) systems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: enable support for QCA9984Vasanthakumar Thiagarajan3-0/+48
QCA9984 shares the same configuration with QCA99X0. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: define rx_ppdu_end for QCA9984Vasanthakumar Thiagarajan1-0/+46
QCA9984 Rx descriptor has two 32-bit words of location information when compared to one 32-bit word in QCA99X0. To handle this difference in rx descriptor ppdu_end, define a new ppdu_end for QCA9984 descriptor which has the new structure to represent rx_location_info. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: clean up growing hw checks during safe and full resetVasanthakumar Thiagarajan2-16/+34
Store pci chip secific reset funtions in struct ath10k_pci as callbacks during early ath10k_pci_probe() and use the callback to perform chip specific resets. This patch essentially adds two callback in ath10k_pci, one for doing soft reset and the other for hard reset. By using callbacks we can get rid of those hw revision checks in ath10k_pci_safe_chip_reset() and ath10k_pci_chip_reset(). As such this patch does not fix any issue. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-24ath10k: move rx_location_info out of struct rx_pkt_endVasanthakumar Thiagarajan1-1/+1
Define rx_location_info in struct rx_ppdu_end_qca99x0 after rx_pkt_end. This is to prepare rx_ppdu_end for QCA9984 chip. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-20Merge tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-2/+2
Pull driver core updates from Greg KH: "Here's the "big" driver core update for 4.7-rc1. Mostly just debugfs changes, the long-known and messy races with removing debugfs files should be fixed thanks to the great work of Nicolai Stange. We also have some isa updates in here (the x86 maintainers told me to take it through this tree), a new warning when we run out of dynamic char major numbers, and a few other assorted changes, details in the shortlog. All have been in linux-next for some time with no reported issues" * tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case" gpio: ws16c48: Utilize the ISA bus driver gpio: 104-idio-16: Utilize the ISA bus driver gpio: 104-idi-48: Utilize the ISA bus driver gpio: 104-dio-48e: Utilize the ISA bus driver watchdog: ebc-c384_wdt: Utilize the ISA bus driver iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros iio: stx104: Add X86 dependency to STX104 Kconfig option Documentation: Add ISA bus driver documentation isa: Implement the max_num_isa_dev macro isa: Implement the module_isa_driver macro pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS isa: Decouple X86_32 dependency from the ISA Kconfig option driver-core: use 'dev' argument in dev_dbg_ratelimited stub base: dd: don't remove driver_data in -EPROBE_DEFER case kernfs: Move faulting copy_user operations outside of the mutex devcoredump: add scatterlist support debugfs: unproxify files created through debugfs_create_u32_array() debugfs: unproxify files created through debugfs_create_blob() debugfs: unproxify files created through debugfs_create_bool() ...
2016-05-20Merge tag 'wireless-drivers-next-for-davem-2016-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller93-4766/+6749
Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: iwlwifi * remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option * work for RX multiqueue continues * dynamic queue allocation work continues * add Luca as maintainer * a bunch of fixes and improvements all over brcmfmac * add 4356 sdio support ath6kl * add ability to set debug uart baud rate with a module parameter wil6210 * add debugfs file to configure firmware led functionality ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-18iwlwifi: fix mis-merge that breaks the driverLinus Torvalds1-1/+2
My laptop that uses the intel 7680 iwlwifi module would no longer connects to the network. It would fail with a "Microcode SW error detected." and spew out register state over and over again without ever connecting to the network. The cause is mis-merge in commit 909b27f70643, where David seems to have lost some of the changes to iwl_mvm_set_tx_cmd() from commit 5c08b0f5026f ("iwlwifi: mvm: don't override the rate with the AMSDU len"). The reason seems to be a conflict with commit d8fe484470dd ("iwlwifi: mvm: add support for new TX CMD API"), which touched a line adjacent to the changes in 909b27f70643. David missed the fact that "info->driver_data[0]" had become "skb_info->driver_data[0]". Then he removed the skb_info because it was unused. This just re-updates iwl_mvm_set_tx_cmd() with the lost two lines. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Reinoud Koornstra <reinoudkoornstra@gmail.com> Cc: Luciano Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-2/+2
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-34/+46
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11Merge ath-next from ath.gitKalle Valo24-145/+767
ath.git patches for 4.7. Major changes: ath6kl * add ability to set debug uart baud rate with a module parameter wil6210 * add debugfs file to configure firmware led functionality
2016-05-11ath10k: Fix survey reporting with QCA4019Vasanthakumar Thiagarajan1-0/+1
In QCA4019, cycle counter wraparound in same fashion as QCA988X. When the cycle counter wraparound it resets to 0x7fffffff. Set has_shifted_cc_wraparound to true for QCA4019 to enable the code path to handle cycle counter wraparound for consistent survey report. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-11ath10k: suppress warnings when getting wmi peer_rate_code_list eventVasanthakumar Thiagarajan1-0/+1
In 10.4, fw sends WMI PEER_RATECODE_LIST_EVENTID after successful peer_assoc cmd. As of now this event is not of much use and not implemented. Change the debug level and messsage as appropriate to suppress "Unknown eventid: 36898". Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-11wil6210: add support for device led configurationMaya Erez5-0/+281
Add the ability to configure the device led to be used for notifying the AP activity (60G device supports leds 0-2). The host can also configure the blinking frequency of the led in three states. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-11atmel: potential underflow in atmel_set_freq()Dan Carpenter1-1/+1
Smatch complains that we cap the upper bound of "fwrq->m" but not the lower bound. I don't know if it can actually happen but it's simple enough to check for negatives. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-11airo: prevent potential underflow in airo_set_freq()Dan Carpenter1-1/+1
I'm not sure if this can underflow but Smatch complains. It seems harmless to add a check for negatives. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-11mwifiex: fixup error messagesWei-Ning Huang1-2/+3
Use dev_err instead of pr_err and add newline character at the end. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-11rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ringwang yanqing1-1/+1
We can't use kfree_skb in irq disable context, because spin_lock_irqsave make sure we are always in irq disable context, use dev_kfree_skb_irq instead of kfree_skb is better than dev_kfree_skb_any. This patch fix below kernel warning: [ 7612.095528] ------------[ cut here ]------------ [ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80() [ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common [ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4 [ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454 [ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400 [ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8 [ 7612.095604] Call Trace: [ 7612.095614] [<c12ce7c5>] dump_stack+0x41/0x5c [ 7612.095620] [<c104cc59>] warn_slowpath_common+0x89/0xc0 [ 7612.095628] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095634] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095640] [<c104ccad>] warn_slowpath_null+0x1d/0x20 [ 7612.095646] [<c10508a8>] __local_bh_enable_ip+0x58/0x80 [ 7612.095653] [<c16b7d34>] destroy_conntrack+0x64/0xa0 [ 7612.095660] [<c16b300f>] nf_conntrack_destroy+0xf/0x20 [ 7612.095665] [<c1677565>] skb_release_head_state+0x55/0xa0 [ 7612.095670] [<c16775bb>] skb_release_all+0xb/0x20 [ 7612.095674] [<c167760b>] __kfree_skb+0xb/0x60 [ 7612.095679] [<c16776f0>] kfree_skb+0x30/0x70 [ 7612.095686] [<f81b869d>] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095692] [<f81b869d>] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095698] [<f81b87f9>] rtl_pci_start+0x19/0x190 [rtl_pci] [ 7612.095705] [<f81970e6>] rtl_op_start+0x56/0x90 [rtlwifi] [ 7612.095712] [<c17e3f16>] drv_start+0x36/0xc0 [ 7612.095717] [<c17f5ab3>] ieee80211_do_open+0x2d3/0x890 [ 7612.095725] [<c16820fe>] ? call_netdevice_notifiers_info+0x2e/0x60 [ 7612.095730] [<c17f60bd>] ieee80211_open+0x4d/0x50 [ 7612.095736] [<c16891b3>] __dev_open+0xa3/0x130 [ 7612.095742] [<c183fa53>] ? _raw_spin_unlock_bh+0x13/0x20 [ 7612.095748] [<c1689499>] __dev_change_flags+0x89/0x140 [ 7612.095753] [<c127c70d>] ? selinux_capable+0xd/0x10 [ 7612.095759] [<c1689589>] dev_change_flags+0x29/0x60 [ 7612.095765] [<c1700b93>] devinet_ioctl+0x553/0x670 [ 7612.095772] [<c12db758>] ? _copy_to_user+0x28/0x40 [ 7612.095777] [<c17018b5>] inet_ioctl+0x85/0xb0 [ 7612.095783] [<c166e647>] sock_ioctl+0x67/0x260 [ 7612.095788] [<c166e5e0>] ? sock_fasync+0x80/0x80 [ 7612.095795] [<c115c99b>] do_vfs_ioctl+0x6b/0x550 [ 7612.095800] [<c127c812>] ? selinux_file_ioctl+0x102/0x1e0 [ 7612.095807] [<c10a8914>] ? timekeeping_suspend+0x294/0x320 [ 7612.095813] [<c10a256a>] ? __hrtimer_run_queues+0x14a/0x210 [ 7612.095820] [<c1276e24>] ? security_file_ioctl+0x34/0x50 [ 7612.095827] [<c115cef0>] SyS_ioctl+0x70/0x80 [ 7612.095832] [<c1001804>] do_fast_syscall_32+0x84/0x120 [ 7612.095839] [<c183ff91>] sysenter_past_esp+0x36/0x55 [ 7612.095844] ---[ end trace 97e9c637a20e8348 ]--- Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: Stable <stable@vger.kernel.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-11rtlwifi: Remove double check for cnt_after_linkedwang yanqing1-8/+4
rtl_lps_enter does two successive check for cnt_after_linked to make sure some time has elapsed after linked. The second check isn't necessary, because if cnt_after_linked is bigger than 5, it is bigger than 2 of course! This patch remove the second check code. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.