aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2016-04-14rtl8xxxu: Add radio init tables for 8192euJes Sorensen1-0/+154
Add the required radio init tables for 8192eu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set TX page boundaries for 8192euJes Sorensen2-1/+7
The 8192eu also has it's own TRXFF boundary value to set. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Do not mess with AFE_XTAL_CTRL on 8192euJes Sorensen1-1/+1
To match the vendor driver, do not mess with AFE_XTAL_CTRL on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add MAC init table for 8192euJes Sorensen2-6/+40
The 8192eu requires a different MAC init table. Add the missing table and specify the table to use in the fileops structure. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-12ath10k: remove MSI range supportRajkumar Manoharan2-157/+24
MSI-X is never well-tested, might contain bugs and generally isn't really all that useful to maintain. Also ath10k is mainly used with shared/singly-MSI interrupt systems. Hence removing MSI range support. This change will be useful for further cleanup in copy engine lock and to add NAPI support. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: enable set_tsf vdev command to WMI 10.4Peter Oh1-1/+1
10.4 firmware has addeded set_tsf vdev parameter, hence enable it. set_tsf function can be used to shift TBTT that will help avoid its clockdrift which happens when beacons are collided. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: update 10.4 WMI vdev parametersPeter Oh1-0/+6
Update 10.4 WMI vdev param to sync to current 10.4 firmware as of 2/23/2016. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: add a support of set_tsf on vdev interfacePeter Oh4-0/+34
10.2.4.70.24 firmware introduces new feature to set TSF via vdev parameter, hence implement relevant function. set_tsf function can be used to shift TBTT that will help avoid its clockdrift which happens when beacons are collided. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: Document alloc_frag_desc_for_data_pkt config option.Ben Greear1-1/+6
This will help anyone trying to use the ack-rssi reporting feature with the host-specified TX-rate option in 10.4 firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg179-1145/+1145
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12iwlwifi: mvm: fix accessing Null pointer during fw dump collectionMatti Gottlieb2-2/+6
The firwmare file can come with data that is relevant for paging. This data is availablet to the firmware upon request, but it stored in the host's memory. During the firmware init flow, the driver configures the firmware so that the firwmare knows where is the data. When paging is used, the variable paging_mem_size is the number of bytes that are available through paging. This variable is not zeror-ed if the driver fails to configure the paging in the firmware, but the memory is freed which is inconsistent. This inconsistency led to a NULL pointer dereference in the code that collects the debug data. Fix this by zero-ing the paging_mem_size variable and NULLify the relevant pointers, so that the code that collects the debug data will know that the paging data is not available. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: 8000: fix MODULE_FIRMWARE inputSara Sharon2-14/+1
The firwmare name for 8000 is iwlwifi-8000C. The C is appended based on a value read from a register. This allows to load different firwmare versions based on the hardware step during development. Now that the hardware development is completed, we can hard code the 'C' and along the way, fix the input to MODULE_FIRMWARE. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116041 Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: mvm: avoid to WARN about gscan capabilitiesAyala Beker1-3/+10
Gscan capabilities were updated with new capabilities supported by the device. Update GSCAN capabilities TLV and avoid to WARN if the firmware does not have the new capabilities. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: add device IDs for the 8265 deviceOren Givon1-0/+10
Add new 8265 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-11Merge tag 'wireless-drivers-next-for-davem-2016-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller172-5921/+7896
Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: iwlwifi * support for Link Quality measurement * more work 9000 devices and MSIx * continuation of the Dynamic Queue Allocation work * make the paging less memory hungry * 9000 new Rx path * removal of IWLWIFI_UAPSD Kconfig option ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07Merge ath-next from ath.gitKalle Valo68-1768/+3942
ath.git patches for 4.7. Major changes: ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter
2016-04-07mwifiex: dump pcie scratch registersXinming Hu3-3/+49
This patch prints pcie scratch registers during firmware dump. They will be useful for analysing firmware status. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: AMSDU Rx frame handling in AP modeXinming Hu3-1/+96
This patch processes sub AMSDU frame received in AP mode. If a packet is multicast/broadcast, it is sent to kernel/upper layer as well as queued back to AP TX queue so that it can be sent to other associated stations. If a packet is unicast and RA is present in associated station list, it is again requeued into AP TX queue. If a packet is unicast and RA is not in associated station list, packet is forwarded to kernel to handle routing logic. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: schedule main workqueue for transmitting bridge packetsXinming Hu1-0/+2
Bridge packets are enqueued to wmm tx queue, but will not be sent until main workqeue is scheduled for new interrupt or other reason. This adds unnecessary delay during traffic. We will schedule main workqueue when bridge packet is queued. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: remove redundant GFP_DMA flagXinming Hu1-4/+3
skb forwarded to TCP/IP stack doesn't need to allocate in DMA ZONE. This patch removes GFP_DMA flag in this case to save precious DMA memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: check revision id while choosing PCIe firmwareShengzhen Li2-11/+61
Some of the chipsets have two revisions. This patch selects appropriate firmware by checking revision id. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for wakeup on GTK rekey failureGanapathi Bhat2-1/+7
User can configure wakeup on GTK rekey fail with wowlan. Added corresponding wakeup reason. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for GTK rekey offloadGanapathi Bhat5-1/+55
Added driver functionality to offload GTK rekey to firmware. When AP sends new GTK, firmware will update it. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Do not set LDOA15 / LDOV12 on 8192euJes Sorensen1-1/+1
Per the vendor driver, it looks like the 8192eu doesn't have LDOA15 / LDOV12 registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use correct H2C calls for 8192euJes Sorensen1-2/+2
The 8192eu uses the same H2C API as the 8723bu. Call the correct functions for update_rate_mask() and report_connect(). Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Identify 8192eu rev A/B parts correctlyJes Sorensen1-1/+1
8192eu A/B cut parts were incorrectly identified as 8192cu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use enums for chip version numbersJes Sorensen2-43/+67
With support for more chips being added, use an enum to specify the chip version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Update some register definitionsJes Sorensen1-7/+24
Improve descriptive names of some registers and add some additional registers only found on nextgen chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: 8192eu uses txdesc40Jes Sorensen1-1/+1
8192eu uses the new TX descriptor format Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: TXDESC_SHORT_GI is txdesc32 onlyJes Sorensen2-2/+2
This is no short GI bit in the txdesc40 format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Correct txdesc40 gid definitionJes Sorensen1-1/+1
txdesc40 dword2 gid is a 6 bit field, not a single bit Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Rename TX descriptor bits to map them to 32/40 byte descriptorsJes Sorensen2-78/+71
With the size based naming of TX descriptors. Change the bit definition namings to indicate which descriptor format they match, rather than having a device name in the bit name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Change name of struct tx_desc to be more decriptiveJes Sorensen2-12/+12
There are two major types of TX descriptor formats for the RTL parts, the old 32 byte descriptor, and the newer 40 byte descriptor used by the 8723bu, 8192eu, and 88xx series. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: fix NULL pointer dereference errorWei-Ning Huang1-1/+2
In mwifiex_enable_hs, we need to check if priv->wdev.wiphy->wowlan_config is NULL before accessing its member. This sometimes cause kernel panic when suspend/resume. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: ie_list is an array, so no need to check if NULLColin Ian King1-1/+1
ap_ie->ie_list is an array of struct mwifiex_ie and can never be null, so the null check on this array is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix more memory leaks in __il4965_up()Julian Calaby1-0/+2
In some of the non-success return paths, the memory allocated by iwl4965_sta_alloc_lq() in iwl4965_alloc_bcast_station() is not freed. In particular: - if the card isn't ready after il4965_prepare_card_hw() - if the card is hardware-rfkilled In the hardware rfkilled path, the driver enables the rfkill interrupt. When the card is unrfkilled and this interrupt is raised we end up calling il4965_bg_restart() which calls __il4965_up() which calls iwl4965_alloc_bcast_station() again. Suggested-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a memory leak in error handling code of __il4965_upJia-Ju Bai1-0/+1
When il4965_hw_nic_init in __il4965_up fails, the memory allocated by iwl4965_sta_alloc_lq in iwl4965_alloc_bcast_station is not freed. This patches adds il_dealloc_bcast_stations in the error handling code of __il4965_up to fix this problem. This patch has been tested in real device, and it actually fixes the bug. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Move variable initialisation into error codeMarkus Elfring1-2/+4
In rsi_send_data_pkt(), it's a little more logical to assign 'status' in the actual error handling code as opposed to at the top of the functon. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Deleted controversial bits, rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring1-4/+4
In rsi_send_data_pkt(), the following variables are assigned to before they're used: * tmp_hdr - Assigned on line 47, first used on line 48 * bss - Assigned on line 41, first used on line 44 * extnd_size - Assigned on line 50, first used on line 52 * seq_num - Assigned on line 48, first used on line 96 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring1-4/+4
In rsi_send_mgmt_pkt(), the following variables are assigned to before they're used: * wh - Assigned on line 161, first used on line 180 * bss - Assigned on line 160, first used on line 196 * msg - Assigned on line 168, first used on line 175 * extnd_size - Assigned on line 139, first used on line 142 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl818x_pci: Disable pci device in error handling codeJia-Ju Bai1-1/+3
When pci_request_regions in rtl8180_probe fails, pci_disable_device is not called to disable the device which is enabled by pci_enbale_device. This patch fixes the problem by adding a new lable in error handling code. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07b43: Fix memory leaks in b43_bus_dev_ssb_init and b43_bus_dev_bcma_initJia-Ju Bai1-2/+4
The memory allocated by kzalloc in b43_bus_dev_ssb_init and b43_bus_dev_bcma_init is not freed. This patch fixes the bug by adding kfree in b43_ssb_remove, b43_bcma_remove and error handling code of b43_bcma_probe. Thanks Michael for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a null pointer dereference in il_tx_queue_free and il_cmd_queue_freeJia-Ju Bai1-4/+10
If "txq->cmd = kzalloc(...)" in il_tx_queue_init fails, "kfree(txq->cmd[i])" in il_tx_queue_free and il_cmd_queue_free in iwl4965_hw_txq_ctx_free will causes a null pointer dereference, because txq->cmd is NULL at that time. This patch fixes this problem by adding a if-check before kfree. To avoid double free in il_tx_queue_free and il_cmd_queue_free caused by the fixing, txq->meta and txq->cmd in error handling code of il_tx_queue_init are assigned null values. Otherwise, a double free will occur. This patch has been tested in real device, and it actually fixes the bug. Thanks Stanislaw for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwlegacy: Return directly if allocation fails in il_eeprom_init()Markus Elfring1-5/+3
Also remove an unused label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07brcmfmac: Delete unnecessary variable initialisationMarkus Elfring1-1/+1
In brcmf_sdio_download_firmware(), bcmerror is set by the call to brcmf_sdio_download_code_file(), before it's checked in the following line. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ath9k_htc: Delete unnecessary variable initialisationMarkus Elfring1-1/+1
In ath9k_hif_usb_rx_stream(), i is initialised in the for loop it's used in. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtlwifi: use to_delayed_work()Geliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wl1251: use to_delayed_work()Geliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wlcore: use to_delayed_work()Geliang Tang3-7/+7
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ipw2x00: use to_pci_dev()Geliang Tang1-1/+1
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.