aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2016-02-27iwlwifi: mvm: fix RSS key sizingSara Sharon3-4/+5
The initialization and copying of the RSS secret key should not use ARRAY_SIZE as we need to initialize a dword array, and not a byte array. Fix also the hook maximum write size to allow writing a longer table - up to full indirection table size. Fixes: 43413a975d06("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: set the correct descriptor size for tracingSara Sharon1-1/+3
The 9000 series uses a diffrent sized descriptor. Update the relevant tracing field. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to cooling deviceChaya Rachel Ivgi6-0/+200
Register cooling device in order to have the Thermal Manager handle the device's power budget according to the sent notifications. The interface adds a new thermal cooling device to /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to thermal zoneChaya Rachel Ivgi5-17/+353
Register to thermal_zone interface and implement the thermal ops. The thermal handles the device throttling, and sets the the temperature thresholds the Thermal Manager would be notified of crossing. The thermal interface adds a new thermal zone device sensor under /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add CT-KILL notificationChaya Rachel Ivgi5-1/+61
Up to today the driver was notified of the temperature from the FW and decided whether to enter CT-kill or not. From now on, the FW will decide when to enter CT-kill and will notify the driver. Add support for this notification. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27Merge tag 'mac80211-next-for-davem-2016-02-26' into next2Emmanuel Grumbach25-94/+121
Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes
2016-02-26Merge tag 'iwlwifi-for-kalle-2016-02-25' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixesKalle Valo4-1/+17
Two fixes for 4.5: * We forgot to free the paging memory (Matti) * Fix the frames in flight accounting (Liad)
2016-02-25ath10k: fix updating peer stats rx durationMohammed Shafi Shajakhan1-3/+3
We are not updating peer stats rx_duration periodically unless the user one polls for fw_stats, this is because we discard the update event since pdev list is empty. Fix this by updating rx duration periodically irrepective of checks for pdev list (irrespective of ping-pong response) Fixes: 856e7c3 ("ath10k: add debugfs support for Per STA total rx duration") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-25ath10k: remove impossible codeSudip Mukherjee1-3/+0
len has been initialized with a value of 0 and buf_len with 4096. There is no way that this condition (len > buf_len) can be true now. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-25rtlwifi: rtl8821ae: Convert driver to use common 5G channel tableLarry Finger3-40/+7
There are several copies of the 5G channel tables in this driver. These are removed so that the tables in the core will be used. This change also removes a useless message of "Channel 163 in Group not found". The number of possible 5G channels was reduced from 54 to a better value of 49 during the conversion. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtlwifi: rtl8192ee: Convert driver to use new 5G channel tablesLarry Finger1-12/+0
The driver defines its own set of channel tables for the 5G band. With this change, it will use those of the core. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtlwifi: rtl8192de: Convert driver to use common 5G channelsLarry Finger1-19/+4
This driver defines its owh copy of the 5G channels. Change it to use the common definitions. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtlwifi: Prepare for reworking 5G channelsLarry Finger2-5/+20
There are 3 drivers in this family that have 5G radios. Each of them defines local copies of the available channels. This patch adds the two arrays to the core driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25mwifiex: fix an indenting mistakeDan Carpenter1-1/+1
We recently added an indent level here but missed this line. It needs another tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtlwifi: Remove unnecessary synchronize_irq() before free_irq()Lars-Peter Clausen1-1/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Patch was generated using the following semantic patch: // <smpl> @@ expression irq; @@ -synchronize_irq(irq); free_irq(irq, ...); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25b43: Remove unnecessary synchronize_irq() before free_irq()Lars-Peter Clausen1-4/+2
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Patch was generated using the following semantic patch: // <smpl> @@ expression irq; @@ -synchronize_irq(irq); free_irq(irq, ...); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25brcmfmac: Increase nr of supported flowrings.Hante Meuleman4-30/+41
New generation devices have firmware which has more than 256 flowrings. E.g. following debugging message comes from 14e4:4365 BCM4366: [ 194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264 At various code places (related to flowrings) we were using u8 which could lead to storing wrong number or infinite loops when indexing with this type. This issue was quite easy to spot in brcmf_flowring_detach where it led to infinite loop e.g. on failed initialization. This patch switches code to proper types and increases the maximum number of supported flowrings to 512. Originally this change was sent in September 2015, but back it was causing a regression on BCM43602 resulting in: Unable to handle kernel NULL pointer dereference at virtual address ... The reason for this regression was missing update (s/u8/u16) of struct brcmf_flowring_ring. This problem was handled in 9f64df9 ("brcmfmac: Fix bug in flowring management."). Starting with that it's safe to apply this original patch as it doesn't cause a regression anymore. This patch fixes an infinite loop on BCM4366 which is supported since 4.4 so it makes sense to apply it to stable 4.4+. Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add missing bit define for REG_APS_FSMCOJes Sorensen1-0/+1
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Make device_init kludge 8723au onlyJes Sorensen1-8/+11
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Do not mask RF registers to 6 bitsJes Sorensen1-2/+0
Newer chips have RF registers beyond the original 0x3f address. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Remove unused len/cnt variables from rtl8xxxu_rx_complete()Jes Sorensen1-3/+1
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Remove unused mgmt variable from rtl8xxxu_rx_complete()Jes Sorensen1-3/+0
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Set correct bit to reset MCU IO wrapperJes Sorensen1-2/+2
All chips, except for 8812 require BIT(0) for resetting the MCU IO wrapper. 8723b requires a more complicated reset sequence, so it will need a custom reset function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: rtl8xxxu_set_linktype(): Be consistent aboutregister size REG_MSRJes Sorensen1-2/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Enable data frame reception in rtl8xxxu_startBruno Randolf1-10/+2
mac80211 documentation says, the ieee80211_ops.start callback "must turn on frame reception (for possibly enabled monitor interfaces.)". If not a single monitor interface does not receive data frames. Similarly we should not change the data reception based on the association state. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Fix 80 character per line issueJes Sorensen1-2/+3
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Remove duplicate USB IDJes Sorensen1-2/+0
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Document REG_RXFLTMAP registersBruno Randolf1-6/+20
Add comments describing how REG_RXFLTMAP0, REG_RXFLTMAP1 and REG_RXFLTMAP2 work. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Enable monitor mode by handling filtersBruno Randolf1-11/+45
Monitor mode is enabled by handling the filter flags we get from mac80211 in rtl8xxxu_configure_filter() and writing them to the RCR register. By handling the filters, we can also stop setting the BSSID filters in the association event. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Fix cosmetics to quiet down checkpatch policeJes Sorensen1-1/+1
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Use REG_EFUSE_TEST register only on multifunctional devicesJakub Sitnicki2-3/+7
rtl8192cu driver doesn't read/write the REG_EFUSE_TEST register. Neither does the rtl8188eu driver. Do it only for multifunc devices RTL8723AU/RTL8723BU. Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Remove unused clutter for handling recursive calls to rtl8xxxu_init_device()Jes Sorensen2-12/+1
This was a leftover from the vendor driver that was never utilized. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add REG_OFDM0_RX_D_SYNC_PATH definitionsJes Sorensen1-0/+3
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add mbox extension register definitions for 8723BJes Sorensen1-0/+5
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add definitions for antenna selection registers for 8723BUJes Sorensen1-0/+4
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Implement rtl8xxxu_reset_8051()Jes Sorensen1-12/+26
We need to reset the 8051 in order for it to launch the fw on the rtl8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Check return value of kmemdup()Tobias Klauser1-0/+4
In rtl8xxxu_load_firmware() check the return value of kmemdup() and error out with -ENOMEM in case of NULL to prevent a NULL pointer dereference. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Fix typo in Kconfig help textTobias Klauser1-1/+1
Fix spelling of "benefits". Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add more RCR bitsJes Sorensen1-1/+10
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add REG_TX_REPORT_* definesJes Sorensen1-0/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Define SYS_CFG_SW_OFFLOAD_ENJes Sorensen1-0/+1
This is needed for chips with IOL support. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Add RQPN_[NE]PQ_SHIFT valuesJes Sorensen1-0/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: If fw running in RAM, reset the 8051 before trying to download a new oneJes Sorensen1-1/+18
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: rtl8xxxu_download_firmware(): Cosmetic cleanupsJes Sorensen1-7/+12
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-25rtl8xxxu: Minor cleanup to rtl8xxxu_download_firmware()Jes Sorensen1-1/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-24mac80211: remove ieee80211_get_key_tx_seq/ieee80211_set_key_tx_seqEliad Peller1-12/+8
Since the PNs of all the tx keys are now tracked in the public part of the key struct (with atomic counter), we no longer need these functions. dvm and vt665{5,6} are currently the only users of these functions, so update them accordingly. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24iwlwifi: mvm: move TX PN assignment for TKIP to the driverEliad Peller3-6/+13
If protocol offloading is configured, the fw might generate some frames (e.g. arp response) on its own during d3/d0i3. On d3/d0i3 exit the driver queries the updated PN (if relevant), and updates its keys (for the d0i3 case, this is done by iwl_mvm_d0i3_exit_work(), which is scheduled on d0i3 exit) While in d0i3, iwlmvm defers tx frames until d0i3 exit, and then continues their processing. This is problematic with TKIP, since the frame's PN has already been set at this stage (in contrast to CCMP, where the PN is being set only later on), so both the frame's PN and the upcoming PN update (from d0i3 exit work) might be wrong. Fix it by moving the TX PN assignment (for TKIP) to the driver, similarly to CCMP. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24cfg80211: basic support for PBSS network typeLior David1-0/+10
PBSS (Personal Basic Service Set) is a new BSS type for DMG networks. It is similar to infrastructure BSS, having an AP-like entity called PCP (PBSS Control Point), but it has few differences. PBSS support is mandatory for 11ad devices. Add support for PBSS by introducing a new PBSS flag attribute. The PBSS flag is used in the START_AP command to request starting a PCP instead of an AP, and in the CONNECT command to request connecting to a PCP instead of an AP. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211_hwsim: remove shadowing variableJohannes Berg1-3/+1
The function here already has a variable hdr that even contains the right thing, so the inner scope's hdr variable that's shadowing the outer one can just be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23iwlwifi: mvm: Fix paging memory leakMatti Gottlieb3-1/+8
If the opmode is stopped and started again we did not free the paging buffers. Fix that. In addition when freeing the firmware's paging download buffer, set the pointer to NULL. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.