aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2015-11-26brcmfmac: Add wowl wake indication report.Hante Meuleman2-2/+77
On wakeup of the system (resume) a wowl wakeup indication report can be sent to cfg80211. This patch adds support for this. The report specifies if the device was responsible for the wakeup and if so, will specify the exact reason. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use new methods for pcie Power Management.Hante Meuleman1-52/+37
Currently the legacy methods suspend and resume are used for pcie devices. This is not the preferable method and is also causing issues with some setups when doing hibernate. Changing this to use the new PM methods. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use consistent naming for bsscfgidx.Hante Meuleman10-74/+78
The variable bsscfgidx is used in different places with different names, e.g. bsscfg, bssidx, bsscfg_idx. This patch cleans this up by using bsscfgidx everywhere. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add RSDB support.Hante Meuleman3-2/+8
Broadcom devices with a single 802.11 core can work on two band concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band. For devices that are fitted with two 802.11 cores and RF paths the driver should support a firmware feature called RSDB, which stands for Real Simultaneous Dual-Band. RSDB works almost autonomously in firmware except for AP config. When the device supports RSDB then the interface should not be brought down when configuring it, otherwise the link (if configured) on the other interface will be lost. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> [kvalo@codeaurora.org: changed the commit log based on discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Disable runtime pm for USB.Hante Meuleman1-1/+0
Currently runtime pm is enabled for USB, but it is not properly supported by driver. This patch disables the runtime PM support completely for USB, as it currently can result in problems on some systems. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Remove unncessary variable irq_requested.Hante Meuleman1-6/+0
The variable irq_requested is unneeded as the functionality it is providing, is also provided by the variable irq_allocated. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Remove unnecessary check from start_xmit.Hante Meuleman1-8/+0
The brcmf_netdev_start_xmit checks if the ndev is still valid by checking if it still exists in database. This check is not needed and therefor removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Simplify and fix usage of brcmf_ifname.Hante Meuleman3-18/+13
brcmf_ifname is a debug function to return a name related to an ifp, but is using a rather complex implementation. It was also used wrongly from bcdc as it did not use the bsscfgidx as it was supposed to, but bssidx. This patch fixes that bug and simplifies brcmf_ifname. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.Hante Meuleman3-0/+12
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-23ath10k: store msdu_id instead of txbuf pointersMichal Kazior2-33/+28
Txbuf is no longer a DMA pool and can be easily tracked with a mere msdu_id. This saves 10 bytes on 64bit systems and 6 bytes on 32bit systems of precious sk_buff control buffer. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: replace vdev_id and tid in skb cbMichal Kazior4-40/+50
This prepares the driver for future ieee80211_txq and wake_tx_queue() support. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: fix tx header parsingMichal Kazior3-6/+6
Frames are not guaranteed to be 802.11 frames in ath10k_htt_tx() and the tx completion handler. In some cases, like TDLS, they can be Ethernet. Hence checking, e.g. frame_control could yield bogus results and behavior. Fortunately this wasn't a real problem so far because there's no FW/HW combination to encounter this problem. However it is good to fix this in advance. Fixes: 75d85fd9993c ("ath10k: introduce basic tdls functionality") Fixes: eebc67fef3ee ("ath10k: fix pmf for wmi-tlv on qca6174") Fixes: 7b7da0a02192 ("ath10k: drop probe responses when too many are queued") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: pack up flags in skb_cbMichal Kazior4-15/+24
It was wasteful to have all the flags as separate bools. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove freq from skb_cbMichal Kazior3-7/+8
It was wasteful to keep it in the struct. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove is_offchanMichal Kazior3-4/+6
It was wasteful to keep it in the struct. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove txmode from skb_cbMichal Kazior4-16/+38
It was wasteful to keep it in the struct because it can be passed as function argument down the tx path. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: rename function to adhere to naming conventionMichal Kazior1-3/+6
All functions should have ath10k_{filename}_ prefixes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: merge is_protected with nohwcryptMichal Kazior3-8/+10
It was wasteful to have two flags describing the same thing. While at it fix code style of ath10k_tx_h_use_hwcrypto(). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: adjust the RX packet pad offset at QCA99X0 4addr modeYanbo Li4-1/+27
The QCA99X0 4 addresses RX packets pad 2 bytes at the beginning of MSDU instead the end of ieee80211 header to keep alignment. The currently RX data path can't parse the header correctly in this case. This patch fixes it for QCA99X0. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> [kvalo@qca.qualcomm.com: checkpatch fixes and naming changes] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-18net: add netif_tx_napi_add()Eric Dumazet1-1/+1
netif_tx_napi_add() is a variant of netif_napi_add() It should be used by drivers that use a napi structure to exclusively poll TX. We do not want to add this kind of napi in napi_hash[] in following patches, adding generic busy polling to all NAPI drivers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18mac80211_hwsim: move Kconfig entry for sorting alphabeticallyKalle Valo1-13/+13
mac80211_hwsim was not placed alphabetically correctly in menuconfig, fix that. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18ath: unify Kconfig with other vendorsKalle Valo3-11/+12
Change menuconfig to config to keep the Kconfig entries unified. Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18ti: unify Kconfig with other vendorsKalle Valo5-12/+15
Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure that it's enabled by default in new configs. Convert menuconfigs to regular configs to unify the wireless drivers menuconfig. Part of reorganising wireless drivers directory and Kconfig. Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is already under if WLAN_VENDOR_TI. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mediatek: unify Kconfig with other vendorsKalle Valo3-9/+12
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18rt2x00: move under ralink vendor directoryKalle Valo50-3/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18rsi: add vendor Kconfig entryKalle Valo3-3/+17
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18realtek: create separate Kconfig fileKalle Valo3-6/+20
Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS which we missed to do when earlier moving rtlwifi. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18prism54: move under intersil vendor directoryKalle Valo20-22/+21
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18orinoco: move under intersil vendor directoryKalle Valo35-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18p54: move under intersil vendor directoryKalle Valo21-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18hostap: move under intersil vendor directoryKalle Valo24-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18zd1211rw: move under zydas vendor directoryKalle Valo19-2/+4
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18zd1201: move under zydas vendor directoryKalle Valo6-21/+36
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwl8k: move under marvell vendor directoryKalle Valo5-11/+11
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo52-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18libertas_tf: move under marvell vendor directoryKalle Valo12-21/+21
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18libertas: move under marvell vendor directoryKalle Valo35-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo126-2/+3
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18iwlegacy: move under intel directoryKalle Valo24-2/+3
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18ipw2x00: move under intel vendor directoryKalle Valo17-4/+20
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18cw1200: move under st vendor directoryKalle Valo31-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18brcm80211: move under broadcom vendor directoryKalle Valo118-11/+11
Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18b43legacy: move under broadcom vendor directoryKalle Valo29-2/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18b43: move under broadcom vendor directoryKalle Valo67-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18atmel: move under atmel vendor directoryKalle Valo10-49/+64
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18airo: move under cisco vendor directoryKalle Valo7-45/+60
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-17adm80211: move under admtek vendor directoryKalle Valo6-29/+46
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-17rtlwifi: rtl8821ae: Fix lockups on bootLarry Finger2-2/+2
In commit 54328e64047a5 ("rtlwifi: rtl8821ae: Fix system lockups on boot"), an attempt was made to fix a regression introduced in commit 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers"). Unfortunately, there were logic errors in that patch that prevented affected boxes from booting even after that patch was applied. The actual cause of the original problem is unknown as none of the developers have systems that are affected. Fixes: 54328e64047a ("rtlwifi: rtl8821ae: Fix system lockups on boot") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.1+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-17Merge ath-current from ath.gitKalle Valo5-15/+107
ath10k * fix invalid NSS for 4x4 devices * add QCA9377 hw1.0 support * fix QCA6174 regression with CE5 usage wil6210 * new maintainer - Maya Erez
2015-11-17Merge tag 'iwlwifi-for-kalle-2015-11-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixesKalle Valo7-55/+79
* bump API to firmware 19 - not released yet. * fix D3 flows (Luca) * new device IDs (Oren) * fix NULL pointer dereference (Avri)
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.