aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2015-11-16wil6210: hold wil->mutex while managing vringsVladimir Kondratiev2-6/+17
To prevent race when connect flow may run in parallel with the disconnect event. Scenario leading to the bug is: while running connect flow on the AP, STA sends disconnect. log follows. <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Configure for connection CID 1 <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_init_tx() max_mpdu_size 2048 <7>[ 668.736301] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_alloc() <7>[ 668.736363] wil6210 0000:01:00.0: wlan0: DBG[MISC]vring[1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Head 0x00880300 -> 0x00880308 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI command 0x0821 [28] <7>[ 668.736426] DBG[ WMI]Cmd 00000000: 20 00 24 00 00 00 00 00 00 00 21 08 00 00 00 00 .$.......!..... <7>[ 668.736426] DBG[ WMI]cmd 00000000: 00 00 00 00 00 00 5f 5c 00 00 00 00 00 04 00 08 ......_\........ <7>[ 668.736457] DBG[ WMI]cmd 00000010: 01 01 00 00 00 00 00 00 00 00 ff 0f ............ <7>[ 668.736488] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Pseudo IRQ 0x00000004 <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1824 (reply_id 0x1821) <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_mask_irq_pseudo() <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]ISR MISC 0x20000000 <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1003 (reply_id 0x1821) <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Disconnect 04:ce:14:00:07:70 reason [proto 3 wmi 4] <7>[ 668.736582] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread IRQ <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread ISR MISC 0x20000000 <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]MBOX event <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox head 00880330 tail 00880328 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox evt 001a 0010 0000 00 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI event 0x1821 MID 0 @3255145 msec <7>[ 668.736707] DBG[ WMI]evt 00000000: 1a 00 10 00 00 00 00 10 00 00 21 18 69 ab 31 00 ..........!.i.1. <7>[ 668.736707] DBG[ WMI]evt 00000010: 01 01 00 00 00 00 00 00 ........ <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]queue_work -> 0 <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_recv_cmd -> 1 events queued <7>[ 668.736769] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_unmask_irq_pseudo() <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=1, reason=3 <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_disconnect_cid(CID 1, status 1) <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_fini_tx() id=1 <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736957] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1821 (reply_id 0x1821) <7>[ 668.736988] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Complete WMI 0x1821 <7>[ 668.737019] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_call(0x0821->0x1821) completed in 0 msec <3>[ 668.737019] wil6210 0000:01:00.0: wlan0: Tx config failed, status 0x01 <7>[ 668.739518] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_cfg80211_del_station(04:ce:14:00:07:70, reason=2) <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]_wil6210_disconnect(bssid=04:ce:14:00:07:70, reason=2, ev-) <7>[ 668.739581] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=-2, reason=2 <7>[ 668.742705] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0x (null):d962ce08 0x (null) <3>[ 668.742736] __dma_free_remap: trying to free invalid coherent area: (null) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-16ath10k: fix the wrong RX rate idx report at 11G modeYanbo Li3-3/+6
The RX rate idx is not correct for 11G mode OFDM packet. Because the bitrate table start with CCK index instead of OFDM. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-16ath10k: poll HTT send completion when CE 5 is unusedRajkumar Manoharan1-1/+12
commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") moved send completion polling under HTT Rx (CE 5) service routine. For QCA6174 based devices copy engine 1 (CE 1) is used for HTT Rx instead of CE 5. So send completion never be called. This is causing "failed to transmit packet, dropping: -105" errors. Fix this by processing send completion from CE 1 service routine instead of CE 5. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Tested-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-15iwlwifi: mvm: Avoid dereferencing sta if it was already flushedAvri Altman1-24/+20
Be a little bit more careful when dereferencing sta on key removal, As it might already get flushed on other thread. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-15iwlwifi: mvm: don't overwrite the key indices in D3 entryLuca Coelho4-28/+39
When entering D3, we need to use hardcoded key indices because the firmware requires that. To do so, we are overwriting the HW key index in the keyconf structure, which makes it impossible to reuse the indices that were used before entering D3. Additionally, we overwrite all the non-PTK keys with index 1, because the firmware only allows one non-PTK key to be set. This is bad, because when we resume, we may try to set more than one key with index 1, which will obviously fail. To fix this, allow the callers to set a pre-defined index to use in iwl_mvm_set_sta_key() instead of relying on the hw_key_idx value from the keyconf struct (which requires overwriting it). In normal cases, the caller can pass STA_KEY_IDX_INVALID, which will cause a new key offset to be chosen. During HW_RESTART, we pass the offset that is in use. And during D3 entry, we pass the hardcoded indices we need to use. Additionally, don't clear the fw_key_table in D3 entry, so that the flags are still set with the pre-D3 values when exiting D3. fixes=I3165c22362483f0152d9ec1d2a987fb5529727c1 Fixes: b546dcd6b742 ("iwlwifi: mvm: don't reset key index on HW restart") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-15iwlwifi: bump firmware API to 19Emmanuel Grumbach2-2/+2
This firmware will be the first firmware to support 3168. It hasn't been released yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-15iwlwifi: Add new PCI IDs for the 8260 seriesOren Givon1-1/+18
Add some new PCI IDs for the 8260 series which were missing. The following sub-system IDs were added: 0x0130, 0x1130, 0x0132, 0x1132, 0x1150, 0x8110, 0x9110, 0x8130, 0x9130, 0x8132, 0x9132, 0x8150, 0x9150, 0x0044, 0x0930 CC: <stable@vger.kernel.org> [4.1+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-12ath10k: fix peerid configuration in htt tx desc for htt version < 3.4Vasanthakumar Thiagarajan4-6/+20
Of a word in struct htt_data_tx_desc htt version >= 3.4 firmware uses LSB 16-bit for frequency configuration which is used for offchannel tx and MSB 16-bit is for peerid. But other firmwares using version 2.X (10.1, 10.2.2, 10.2.4 and 10.4) are using 32-bit for peerid in htt tx desc. So far no issue is found with the existing code setting peerid and freq for HTT version 2.X, this could be mainly because of 0 as frequecy (home channel) is being always passed with those firmwares. There may be issues when non-zero freq is passed with firmware using < 3.4 htt version. To be safe use target_version_major and target_version_minor along with htt-op-version before configuring peer id and freq in htt tx desc. This patch extends ath10k_mac_tx_frm_has_freq() to check for htt_op_version_tlv and uses the helper while setting peerid in htt_tx_desc. Fixes: 8d6d36243610 ("ath10k: fix offchan reliability") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: rename the helper which is used for off-channel txVasanthakumar Thiagarajan1-4/+4
Rename ath10k_mac_need_offchan_tx_work() to ath10k_mac_tx_frm_has_freq() to make it more meaningful. This helper will be used in the future change. No functionality change. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix peer assoc complete WMI command for 10.4Vasanthakumar Thiagarajan2-1/+41
There is an extra 4-byte member when compared to WMI 10.2 added to assoc complete command in WMI 10.4. This new member is used for 160Mhz related configuration. This WMI command mismatch between host and firmware does not cause any real issues because this new member is not used in 10.4 firmwares so far (10.4.1.00030-1). This difference in WMI command interface brings in a new wmi_ops for 10.4 gen_peer_assoc(). No noticeable functionality differences with this change can be seen with the current 10.4 firmwares, but the WMI interface has to be fixed to work with future 10.4 firmwares which may be using this new member. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: override CE5 configuration for QCA6147 deviceRyan Hsu1-3/+29
Commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") introduced to use the unused CE5 for target to host message. For the device like QCA6174, CE5 already assigned for other feature. So for QCA6174, override the CE5 configuration and use the CE1 instead. This patch is based on Rajkumar's earlier patch. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: add QCA9377 hw1.0 supportBartosz Markowski3-0/+23
Add new BMI target version and chip id revision. Register it on supported chips list. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: introduce dev_id to hw_paramsBartosz Markowski4-7/+33
A follow up patch introducing a QCA9377 hw1.0 support will need this device identification helper for an explicit distinction of HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI target version (0x0502000x). For the QCA9377 hw1.1 previously added we were just lucky we did not overlap with the same chip_id_rev. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: update missing hw_params of QCA9377 hw1.1Bartosz Markowski1-1/+3
The uart_pin was incorrectly configured for QCA9377 and the recently added hw_params were omitted. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix the currently supported QCA9377 target version nameBartosz Markowski3-5/+9
When introducing the original QCA9377 support, the chip target version was wrongly picked. The chip advertising itself with bmi target value equal to 0x05020001 is in fact a 1.1 revision. I realized this once I got a real 1.1 hw to play with. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-10ath10k: fix invalid NSS for 4x4 devicesRajkumar Manoharan1-1/+1
The number of spatial streams that are derived from chain mask for 4x4 devices is using wrong bitmask and conditional check. This is affecting downlink throughput for QCA99x0 devices. Earlier cfg_tx_chainmask is not filled by default until user configured it and so get_nss_from_chainmask never be called. This issue is exposed by recent commit 166de3f1895d ("ath10k: remove supported chain mask"). By default maximum supported chain mask is filled in cfg_tx_chainmask. Cc: stable@vger.kernel.org Fixes: 5572a95b4b ("ath10k: apply chainmask settings to vdev on creation") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-09remove abs64()Andrew Morton1-1/+1
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds5-5/+0
Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds10-27/+27
Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-11-04ath10k: debugfs file to enable Bluetooth coexistence featureYanbo Li3-1/+73
As not all QCA98XX radios are not connected to Bluetooth modules, enabling the BT coex feature in firmware will have side effects if the radio's GPIO are connected with other (non-BT) HW modules. Add debugfs file to control the firmware BT coex logic and set the feature as disable by default to avoid that btcoex is accidentally enabled. To enable this feature, execute: echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex To disable: echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex The firmware support this feature since 10.2.4.54 on 2G-only board, dual band or 5G boards don't support this. The feature's name is WMI_SERVICE_COEX_GPIO and the btcoex file is not created if firmware doesn't support it. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> [kvalo@qca.qualcomm.com: use btcoex filename and other smaller fixes] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add support for pktlog in QCA99X0Vivek Natarajan4-0/+35
This patch adds pktlog support for 10.4 fw versions. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new pdev params defines to 10.4Vasanthakumar Thiagarajan1-0/+6
No functionality change, just sync to the latest pdev params that 10.4 firmware defines. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new WMI cmd/event defines for 10.4Vasanthakumar Thiagarajan1-0/+4
No real functionality change, add WMI command/event defines to be in sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new service defines for 10.4Vasanthakumar Thiagarajan1-0/+10
No functional changes, adds new wmi service bits for 10.4 firmware to be sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add thermal throttling support for 10.4 firmwareTamizh chelvam2-1/+5
This patch enables thermal throttling support for 10.4 firmware. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: set peer MFP flag in peer assoc commandTamizh chelvam4-1/+18
Set peer's management frame protection flag in peer assoc command, this setting will enable/disable encrytion of management frames in fw. Setting of this flag is based on whether MFP is enabled/disabled at STA and a firmware feature flag ATH10K_FW_FEATURE_MFP_SUPPORT. This is because only firmwares 10.1.561 and above have support for MFP. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Manikanta pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add abstraction layer for peer flagsTamizh chelvam6-31/+188
Abstraction layer for peer flags is added to fix ABI breakage. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rxManikanta Pubbisetty1-16/+3
This patch replaces multiple if conditional checks with a single if condition in WMI management rx handler. Found during code review. Signed-off-by: Manikanta Pubbisetty <manikanta.pubbisetty@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-nextMark Brown5-5/+0
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2015-10-29ath6kl: implement ethtool statsBen Greear1-0/+123
This supports a way to get target stats through normal ethtool stats API. For instance: # ethtool -S wlan1 NIC statistics: tx_pkts_nic: 353 tx_bytes_nic: 25142 rx_pkts_nic: 6 rx_bytes_nic: 996 d_tx_ucast_pkts: 89 d_tx_bcast_pkts: 264 d_tx_ucast_bytes: 3020 d_tx_bcast_bytes: 22122 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: break stats gathering code into separate methodBen Greear2-23/+34
This will allow us to call it from elsewhere when implementing ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: fix firmware version assignmentBen Greear1-1/+1
Improper use of strlcpy caused garbage to be appended to the firmware version string. Fix this by paying attention to the ie_lenth. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: add error message to explain lack of HTBen Greear1-0/+3
It can take a user a while to understand why their NIC that advertises 802.11n support cannot actually do 802.11n. Print out a warning in the logs to save the next poor person to use this NIC some trouble. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: report antenna configurationBen Greear2-0/+19
This lets 'iw phy phy0 info' report antennas for the radio device: ... Available Antennas: TX 0x2 RX 0x2 Configured Antennas: TX 0x2 RX 0x2 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: handle failure in Tx vring configVladimir Kondratiev1-1/+1
When configuring Tx vring for new connection, WMI call to the firmware may fail. In this case, need to clean up properly. In particular, need to call cfg80211_del_sta() in case of AP like interface. Perform full "disconnect" procedure for proper clean up Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: fix device ready detectionVladimir Kondratiev3-13/+7
Adjust driver behavior during FW boot. Proper sequence of events after reset and FW download, is as following: - FW prepares mailbox structure and reports IRQ "FW_READY" - driver caches mailbox registers, marks mailbox readiness - FW sends WMI_FW_READY event, ignore it - FW sends WMI_READY event with some data - driver stores relevant data marks FW is operational Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: Fix TSO overflow handlingHamad Kadmany1-15/+15
When Tx ring full is encountered with TSO, printout of "DMA error" was wrongly printed. In addition, in case of Tx ring full return proper error code so that NETDEV_TX_BUSY is returned to network stack in order not to drop the packets and retry transmission of the packets when ring is emptied. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: ignore selected WMI eventsVladimir Kondratiev1-0/+10
Some events are ignored for purpose; such events should not be treated as "unhandled events". Replace info message saying "unhandled" with debug one saying "ignore", to reduce dmesg pollution Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add QCA9377 chipset supportBartosz Markowski4-0/+48
Add the hardware name, revision and update the pci_id table. Currently there're two HW ref. designs available I'm aware of, with 1.0.2 and 1.1 chip revisions. I've access and been using the first one so far and this patch cover only it. QCA9377 inherits most of the stuff (e.g. fw interfaces) from QCA61x4 design, so the integration was pretty straightforward. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: reload HT/VHT capabilities on antenna changeRajkumar Manoharan1-11/+28
To reflect configured antenna settings in HT/VHT MCS map, reload the HT/VHT capabilities upon antenna change. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: move static HT/VHT capability setup functionsRajkumar Manoharan1-140/+140
Move HT and VHT capabiltity setup static functions to avoid forward declaration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: fill HT/VHT MCS rateset only for configured chainmaskRajkumar Manoharan1-3/+5
HT/VHT MCS rateset should be filled only for configured chainmask rather that max supported chainmask. Fix that by checking configured chainmask while filling HT/VHT MCS rate map. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove supported chain maskRajkumar Manoharan3-16/+9
Removing supported chainmask fields as it can be always derived from num_rf_chains. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove shadow copy of CE descriptors for source ringRajkumar Manoharan3-33/+0
For the messages from host to target, shadow copy of CE descriptors are maintained in source ring. Before writing actual CE descriptor, first shadow copy is filled and then it is copied to CE address space. To optimize in download path and to reduce d-cache pressure, removing shadow copy of CE descriptors. This will also reduce driver memory consumption by 33KB during on device probing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: cleanup copy engine send completionRajkumar Manoharan3-50/+12
The physical address necessary to unmap DMA ('bufferp') is stored in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id when handling send completion (htc ep id is stored in sk_buff control buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp} are removed from CE send completion. This change is needed before removing the shadow copy of copy engine (CE) descriptors in follow up patch. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove send completion validation in diag read/writeRajkumar Manoharan1-20/+0
CE diag window access is serialized (it has to be by design) so there's no way to get a different send completion. so there's no need for post completion validation. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: use local memory instead of shadow descriptor in ce_sendRajkumar Manoharan1-7/+6
Currently to avoid uncached memory access while filling up copy engine descriptors, shadow descriptors are used. This can be optimized further by removing shadow descriptors. To achieve that first shadow ring dependency in ce_send is removed by creating local copy of the descriptor on stack and make a one-shot copy into the "uncached" descriptor. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add fw_stats support to 10.4 firmwareManikanta Pubbisetty3-0/+358
This patch adds support for getting firmware debug stats in 10.4 fw. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add FW API support to test modeAlan Liu5-21/+205
Add WMI-TLV and FW API support in ath10k testmode. Ath10k can get right wmi command format from UTF image to communicate UTF firmware. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.