aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2021-10-25ath10k: fix module load regression with iram-recovery featureAbinaya Kalaiselvan3-5/+24
Commit 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support") introduced a new firmware feature flag ATH10K_FW_FEATURE_IRAM_RECOVERY. But this caused ath10k_pci module load to fail if ATH10K_FW_CRASH_DUMP_RAM_DATA bit was not enabled in the ath10k coredump_mask module parameter: [ 2209.328190] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 2209.434414] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 [ 2209.547191] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.9.0.2-00099 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 cbade90a [ 2210.896485] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id 0:1 crc32 a040efc2 [ 2213.603339] ath10k_pci 0000:02:00.0: failed to copy target iram contents: -12 [ 2213.839027] ath10k_pci 0000:02:00.0: could not init core (-12) [ 2213.933910] ath10k_pci 0000:02:00.0: could not probe fw (-12) And by default coredump_mask does not have ATH10K_FW_CRASH_DUMP_RAM_DATA enabled so anyone using a firmware with iram-recovery feature would fail. To my knowledge only QCA9984 firmwares starting from release 10.4-3.9.0.2-00099 enabled the feature. The reason for regression was that ath10k_core_copy_target_iram() used ath10k_coredump_get_mem_layout() to get the memory layout, but when ATH10K_FW_CRASH_DUMP_RAM_DATA was disabled it would get just NULL and bail out with an error. While looking at all this I noticed another bug: if CONFIG_DEV_COREDUMP is disabled but the firmware has iram-recovery enabled the module load fails with similar error messages. I fixed that by returning 0 from ath10k_core_copy_target_iram() when _ath10k_coredump_get_mem_layout() returns NULL. Tested-on: QCA9984 hw2.0 PCI 10.4-3.9.0.2-00139 Fixes: 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support") Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020075054.23061-1-kvalo@codeaurora.org
2021-10-25ath10k: fix invalid dma_addr_t token assignmentArnd Bergmann1-1/+9
Using a kernel pointer in place of a dma_addr_t token can lead to undefined behavior if that makes it into cache management functions. The compiler caught one such attempt in a cast: drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface': drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 5586 | arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf; | ^ Looking through how this gets used down the way, I'm fairly sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL devices, and if it was accessed, that would be a bug. Change the assignment to use a known-invalid address token instead, which avoids the warning and makes it easier to catch bugs if it does end up getting used. Fixes: e263bdab9c0e ("ath10k: high latency fixes for beacon buffer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org
2021-10-25ath11k: change return buffer manager for QCA6390Baochen Qiang6-15/+49
QCA6390 firmware uses HAL_RX_BUF_RBM_SW1_BM, not HAL_RX_BUF_RBM_SW3_BM. This is needed to fix a case where an A-MSDU has an unexpected LLC/SNAP header in the first subframe (CVE-2020-24588). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914163726.38604-2-jouni@codeaurora.org
2021-10-23mt76: connac: fix unresolved symbols when CONFIG_PM is unsetFelix Fietkau1-1/+1
mt76_connac_mcu_reg_* functions are always needed by connac based drivers Fixes: 87f9bf24ea84 ("mt76: connac: move mcu reg access utility routines in mt76_connac_lib module") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Make use of the helper macro kthread_run()Cai Huoqing1-6/+4
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Print error message when reading EEPROM from mtd failedHauke Mehrtens1-1/+4
When the EEPROM data is stored on a MTD partition print an error message when reading this MTD partition failed. This is currently happening often in OpenWrt because the initial data was written with using a flash driver which ignores the error detection data and now OpenWrt uses a driver which checks it. With this patch a better error message is shown: [ 8.986988] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323 [ 9.100508] mt7915e 0000:01:00.0: reading EEPROM from mtd factory failed: -117 [ 9.144289] mt7915e: probe of 0000:01:00.0 failed with error -22 mt7915 does not work without an EEPROM, MT7922 still works. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7921: disable 4addr capabilityLorenzo Bianconi1-1/+2
4addr is not supported by the driver/firmware yet Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add debugfs knobs for MCU utilizationShayne Chen6-4/+75
Add debugfs knobs to read MCU utilization, which helps user know firmware status more easily to narrow down CPU bottleneck issues. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add WA firmware log supportShayne Chen4-14/+58
Support to turn on/off WA firmware log from debugfs. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_capsLorenzo Bianconi1-3/+2
Fix the following sparse warning mt7915_mcu_beacon_check_caps routine: warning: cast to restricted __le32 warning: cast from restricted __le16 Fixes: 22dffbddf0167 ("mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework debugfs fixed-rate knobRyder Lee3-9/+60
Switch to use new mt7915_mcu_set_fixed_rate_ctrl(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee5-27/+175
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: remove mt7915_mcu_add_he()Ryder Lee4-34/+14
Make mt7915_mcu_sta_he_tlv() as a part of mt7915_mcu_add_rate_ctrl() as firmware rate control should get HE rate information from sta_rec_he, and reduce a global function accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: apply cached RF data for DBDCRyder Lee2-2/+21
Band0 and band1 share the same hardware, so band0 will stop Tx/Rx when band1 performs Rx calibration. cal_cache is introduced to solve such corner cases by moving necessary datas from channel_switch to bootup. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: mt7622: fix ibss and meshpointNick Hainke1-2/+2
commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh") meshpoint support. Both used in the "get_omac_idx"-function: if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the ibss and meshpoint mode should "prefer hw bssid slot 1-3". However, with that change the ibss or meshpoint mode will not send any beacon on the mt7622 wifi anymore. Devices were still able to exchange data but only if a bssid already existed. Two mt7622 devices will never be able to communicate. This commits reverts the preferation of slot 1-3 for ibss and meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3. Tested on Banana Pi R64. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Nick Hainke <vincent@systemli.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
2021-10-23mt76: mt7921: fix Wformat build warningRandy Dunlap1-1/+1
ARRAY_SIZE() is of type size_t, so the format specfier should be %zu instead of %lu. Fixes this build warning: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c: In function ‘mt7921_get_et_stats’: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c:1024:26: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=] dev_err(dev->mt76.dev, "ei: %d SSTATS_LEN: %lu", Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: linux-wireless@vger.kernel.org Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022233251.29987-1-rdunlap@infradead.org
2021-10-23mt76: mt7921: fix mt7921s KconfigLorenzo Bianconi1-0/+1
Add missing MMC dependency in mt7921s Kconfig: ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_rr': sdio.c:(.text+0x1263): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x1278): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x12c8): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1327): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x134d): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x138c): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x140f): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1498): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x14e5): undefined reference to `sdio_release_host' ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_wr': sdio.c:(.text+0x1599): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x15ae): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x15f9): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1646): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x16a5): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x16cb): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x170a): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1782): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x17e9): undefined reference to `sdio_release_host' Fixes: 48fab5bbef409 ("mt76: mt7921: introduce mt7921s support") Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1ce6cb04ba1ab5aabd2b06b45fd8266537ef5359.1634893214.git.lorenzo@kernel.org
2021-10-22Merge tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextJakub Kicinski183-2717/+97628
Kalle Valo says: ==================== wireless-drivers-next patches for v5.16 Second set of patches for v5.16 and this time we have a big one. We have the new Realtek driver rtw89 with over 90 kLOC and also over 150 patches for mt76. ath9k also got few new small features. And the usual cleanups and fixes all over. Major changes: rtw89 * new Realtek 802.11ax driver * supports Realtek 8852AE 802.11ax 2x2 chip ath9k * add option to reset the wifi chip via debugfs * convert Device Tree bindings to the json-schema * support Device Tree ieee80211-freq-limit property to limit channels mt76 * mt7921 aspm support * mt7921 testmode support * mt7915 LED support * mt7921 6GHz band support * support for eeprom data in DT * mt7915 TWT support * mt7921s SDIO support * tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (213 commits) zd1201: use eth_hw_addr_set() wl3501_cs: use eth_hw_addr_set() ray_cs: use eth_hw_addr_set() ... ==================== Link: https://lore.kernel.org/r/20211022075845.0E679C4360D@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Merge tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJakub Kicinski1-17/+146
Johannes Berg says: ==================== Quite a few changes: * the applicable eth_hw_addr_set() and const hw_addr changes * various code cleanups/refactorings * stack usage reductions across the wireless stack * some unstructured find_ie() -> structured find_element() changes * a few more pieces of multi-BSSID support * some 6 GHz regulatory support * 6 GHz support in hwsim, for testing userspace code * Light Communications (LC, 802.11bb) early band definitions to be able to add a first driver soon * tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) cfg80211: fix kernel-doc for MBSSID EMA mac80211: Prevent AP probing during suspend nl80211: Add LC placeholder band definition to nl80211_band ... ==================== Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22iwlwifi: pnvm: print out the version properlyJohannes Berg1-1/+1
The version really is a git sha1, not a hex number, so we need to print it out with leading zeroes (8 digits) and without 0x prefix. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.83422182774a.I40703fd517534133eb67d644ee16532ba8a67e35@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: dbg: treat non active regions as unsupported regionsRotem Saado1-1/+3
If a region is not active, it means that it was not defined as a region TLV in the FW image. We should treat them as unsupported in that case. This saves operational driver memory and run time when collecting debug data by skipping unsupported regions. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8025bd29d86a.I3ecb4e273bf714e426d82217e0590264cb763419@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Read acpi dsm to get channel activation bitmapMiri Korenblit3-5/+39
Read the bitmap from the ACPI and pass it to he FW through LARI_CONFIG_CHANGE_CMD. This allows OEMs to override channel state to active as per Geo Location bitmap. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.23d4f2d182c0.I39ac5ff74ac6f2223f393657205eddc1c8e48890@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: add new device id 7F70Yaara Baruch1-0/+3
Add new 7F70 device to cards id struct. Add new 7F70 DID killers devices. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.d931a48ad8bd.I9b027837cba3478c9bb74c3f07df48eaef70a197@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: improve log when processing CSAGregory Greenman1-2/+3
Sometimes driver fails to detect misbehaving AP since we may miss a few beacons (AP is declared misbehaving only after the second time CSA counter has a wrong jump). Move the print to the start of the function to avoid doubts when analysing this kind of issues. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8e6b1eb8a436.I5fd6caee968007e91d03b93d6ea84b670ce047e9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: set BT-coex high priority for 802.1X/4-way-HSJohannes Berg5-0/+20
Set BT coex high priority during the 802.1X handshake to avoid issues where BT is active enough to kill all the big negotiation frames that we may need to send (e.g. with a large certificate), leading to the connection not being established correctly. Give WiFi priority over BT during this short but critical phase. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.a1825bbba397.I10315577fb41dfcec15c92e8f6785d9655f74c6a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: dbg: treat dbgc allocation failure when tlv is missingRotem Saado1-1/+3
in case allocation tlv is missing for specific dbgc id, treat it as allocation failure. with this behavior we removing later the unsupported regions relating to the failed dbgc allocation. this saves operational driver memory and run time at collecting debug data. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.4cd241abf1de.I8f6cf00a7266675dfebdc01a73c1ac6e001855b9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: add new killer devices to the driverYaara Baruch3-0/+32
Add 1550, 1675 and 1690 killer devices to the driver. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.9a3d01b8c4e9.I9720afa0a6ea72f94ed4a3f3cf88294174ab905b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: set inactivity timeouts also for PS-pollSara Sharon1-14/+14
Code tried to avoid setting ACs for PS-poll by an early return. However as a result the timeouts weren't set as well. Inactivity timeout of zero means we will always try to go back to sleep immediately after moving to AM, which doesn't make much sense, and isn't supported by FW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.dda7f6ba0b22.Ia107bfe496b84e8a2edb33d9f39a5d2b56ed63f7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: pcie: try to grab NIC access earlyJohannes Berg1-0/+18
Sometimes some NICs may fail to initialize, but if we have such a scenario we may only see an alive timeout (i.e. the firmware doesn't send us the alive message), and that will only cause us to fail the interface up. Try to once grab NIC access during device probe to ensure we can properly talk to the hardware at all, and to do all the potential workarounds in that function. Since we now finish NIC init here, we can remove it from the later potential read of the RF ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.604dfc8f43bd.I07b58a5c9238f75413a91198452ba1268ee79425@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: reduce WARN_ON() in TX status pathJohannes Berg1-1/+3
Evidently, it's possible to hit this issue, so reduce the noise from it by just having it print a (rate-limited) message instead. We don't really know yet why we hit it, but there's no value in having a WARN_ON() here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: allow rate-limited error messagesJohannes Berg3-16/+40
Sometimes we might want to have an error message for something related to TX/RX, but if that somehow happens frequently it'll overwhelm the logs. Add IWL_ERR_LIMIT() to alleviate that by rate-limiting those messages. To do this, rework __iwl_err() a bit to have a mode argument instead of passing yet another (bool) argument to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.2cb1e6b75672.Iec5b1c1bcc6ebc87c586921a6c5c2a937f49e83c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: remove session protection after auth/assocJohannes Berg1-0/+16
When auth/assoc completes, we should remove session protection, except when association is successful, where we need it until a beacon is received from the AP. In particular, in the case of assoc comeback, currently the session protection event just times out, leading to confusing messages: wlan0: 42:00:00:00:00:00 rejected association temporarily; comeback duration 1000 TU (1024 ms) iwlwifi 0000:00:00.0: Not associated and the session protection is over already... wlan0: Connection to AP 42:00:00:00:00:00 lost wlan0: associate with 42:00:00:00:00:00 (try 2/3) mac80211 never does anything on the "Connection ... lost" as it's not even connected. Removing the session protection when it's no longer needed removes those confusing messages and lets the device do other things in the allocated time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.95e4bebb069b.I635280e5d26c70414ac6eb5d62b46fe4bd942818@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: remove redundant iwl_finish_nic_init() argumentJohannes Berg6-13/+12
We don't need this argument, since in all cases where the function is called, trans->trans_cfg is already set (it's in fact set during allocation). Remove it to avoid any confusion about it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.cb04580b8521.I7129d4ba3dc689af839761d5807a10f99718893e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Add RTS and CTS flags to iwl_tx_cmd_flags.Miri Korenblit1-0/+4
As part of the new rate_n_flags, the RTS and CTS flags are being removed from it. Instead, we have these flags in the flags field in the TX command. Add to new flags to the iwl_tx_cmd_flags enum. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b5aaabb04432.I999f86ed6a9d9b99e63a33f724963f83f85fbb44@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: remove csi from iwl_mvm_pass_packet_to_mac80211()Luca Coelho1-5/+3
Remove the unused csi parameter from iwl_mvm_pass_packet_to_mac80211(). It is not used anymore, but was accidentally left in. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20211017132604.480251-2-luca@coelho.fi Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new rate_n_flags for REPLY_RX_MPDU_CMD and RX_NO_DATA_NOTIFLuca Coelho2-58/+86
As part of the new rate_n_flags this two APIs may use the new rate. Add support for the new rate. These two APIs were updated in one patch because both of them are using the same functions which were changed. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.7eb6240b8079.I1e804e70a8ebd23840a9431fc5d2a56ad8d5d1a2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new TX_RSP and COMPRESSED_BA_RES versionsMiri Korenblit5-24/+99
As part of the new rate_n_flags, a new version of this structures was added in the FW. Add support for this new version and for the new rate_n_flags in this API. Both these APIs were updated in one patch since they are using the same functions. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new version of BEACON_TEMPLATE_CMD.Miri Korenblit4-17/+41
As part of the new rate_n_flags, a new version of BEACON_TEMPLATE_CMD was added in FW in order to support the new rate_n_flags. Add support for the new version. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Add support for new rate_n_flags in tx_cmd.Miri Korenblit6-11/+30
As part of the new rate_n_flags, tx_cmd API has changed. Add support for these changes. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.26efa51624b1.Ic96ae4d81b3ff07fb514df2b5f6a8e470e4d3778@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: BZ Family SW reset supportRoee Goldfiner2-18/+18
Previously added BZ reset wasn't taking into account the call to iwl_trans_pcie_sw_reset which used a pre-BZ logic to reset the device - enabling iwl_trans_pcie_sw_reset to support BZ family made this reset redundant. MAC_ACCESS clear shouldn't be called here but only when calling _iwl_trans_pcie_stop_device which now support also BZ family. Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.648931fe07e2.Ibf30f9b8e70536da93c4a574ace33d325d3f8da4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: BZ Family BUS_MASTER_DISABLE_REQ code duplicationRoee Goldfiner2-14/+3
Remove redundant code which occurs anyway in a later stage and add msleep(100) which is required after disable request. Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.46183bcd6549.Ie05161496810d3f28fb9d1fecb5f8593889ed2c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: yoyo: fw debug config from context info and presetMukesh Sisodiya9-5/+245
Add new TLV for debug config set to read preset based on TLV is set in context info. This is needed to set the preset based on ucode in early trigger point. Add DRAM frag allocation info in first fragment of DBGC1 with all details. New capability from FW for DBGC frag debug support is added and BUFFER_ALLOCATION_CMD is disabled in capability is supported. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.cacf0babc521.If3704b5fda09b344e3e438252360898a3f2e90fa@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new version of ranging response notificationMiri Korenblit3-5/+9
As part of the new rate_n_flags, FW added a new version for LOCATION_RANGE_RSP_NTFY, and it's internal structure - LOCATION_RANGE_RSP_AP_ETRY_NTFY. Add support for this. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.c5c6c863631e.I4b493f4eeabbfa1dc965ae012b72fc57de7d5f4f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support version 3 of tlc_update_notif.Miri Korenblit8-144/+244
As part of the new rate_n_flags, a new version of tlc_update_notif was added in FW in order to support the new rate_n_flags. Add support for the new version, and move the all API to use the new rate_n_flags only (if FW supports the old one - convert it). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: convert old rate & flags to the new format.Miri Korenblit4-24/+141
As part of the new rate & flags, convert an old format rate to the new. This is needed if the driver supports the new format but the FW supports the old one. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.1ea5263dafec.Iadffe7cb26554d4c23c9242eb2ec8326306202a9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: add definitions for new rate & flagsMiri Korenblit1-4/+144
As a part of preparing to the new rate & flags, add new needed definitions. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.41563bea6610.I51a886fa75cca723c81877b386ba41b2a9db1122@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: update definitions due to new rate & flagsMiri Korenblit9-147/+147
As a part of preparing to the new rate & flags version Update the relevant definitions and use them. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.5862bf4f14c4.Ib476b5443faa085539b79d49a0aebd81a213b42f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: scrub key material in firmware dumpsJohannes Berg1-1/+178
Use the previously added infrastructure to scrub key material in firmware dumps: * in the TX FIFO data, just search for each key that we know about and override such data * scrub various commands that we sent to the firmware if they're present * in firmware memory, where advertised by firmware TLVs Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.d1514964e6a7.I18f8c2ce8082952af7cfe5f8fe75fe51851b8853@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: parse debug exclude data from firmware fileJohannes Berg3-0/+57
Parse the memory dump exclusion TLVs from the firmware file and save the data to be able to apply them later upon dump. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.ec280bcb32cb.Iac0da0e22d7c3c0e237867c9113a06ddd95c7a51@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: fw dump: add infrastructure for dump scrubbingJohannes Berg9-12/+89
In firmware dumps, currently all kinds of key material may be included, e.g. in host commands (if firmware crashes during the processing of a key-related command) or in the TX FIFO(s) if we have been using in-TX-command key material. Additionally, some firmware versions will advertise sections of their internal data to not dump, due to them containing some sensitive data. Add some infrastructure to allow scrubbing this data out, as dependent on the opmode's idea of what will need to be done. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.