| Age | Commit message (Collapse) | Author | Files | Lines |
|
As part of changes made to properly support auxiliary activities in CDB
NICs, an aux sta will be added when using hot spot 2.0 and will need
to be removed when roc flow is done.
In order to do so, prepare the roc_done_wk to work synchronously as the
rm_aux_sta is a SYNC command.
Since now all of th iwl_mvm_flush_sta function are using it sync,
removed the flag argument from the function.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.71b441c8b682.Ia1d216cb680308b91d6da9f73e23ae9f4baac79f@changeid
|
|
The FW relies on the re-enablement of the TX in order to know
it can exit quiet mode. Currently in case of CSA with quiet mode,
the quiet mode is never cancelled, resulting in a complete traffic
hang.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fee389c83ded.I09550fdadb61f899242d7e7b7578672372e2b7fe@changeid
|
|
If we have only a single RX queue, such as when MSI-X is not
available, we should not send the RFH_QUEUEU_CONFIG_CMD, because our
only queue is the same as the command queue and will be configured as
part of the context info. Our code was actually trying to send the
command with 0 queues, which caused UMAC assert 0x1D04.
Fix that by not sending the command when we have a single queue.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.c35eeb3299f8.I08f79a6ebe150a7d180b7005b24504bfdba6d8b5@changeid
|
|
Add PCI subsystem ID 0x6074 for Qu family.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fba1c29fc217.I7d47c8de078d48cfc1c98ce1086e71d8d2ebb980@changeid
|
|
We've removed the code that handles it appropriately, so stop
claiming we support it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.3b8936035273.I7799caa225295de44558e9da093b720afe606359@changeid
|
|
When we receive a non-zero SKU_ID in the alive notification, we need
to ring the doorbell and wait for the FW to send us a PNVM load
complete notification before we continue the init phase.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.a10e8b6bbcf9.Ib5d10b3d508a4d2d4e6b7b629af89d76f4f03d81@changeid
|
|
The ROR structure was replaced by the PNVM structure. They are
functionally identical, only the names have changed. For now we keep
them set to 0, which means that the PNVM was not found and should not
be loaded.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.065c5abcb913.Ifebf7fe47025d720ed58dda0b7ba389b473fe590@changeid
|
|
In v5 of the ALIVE notification, we may receive the SKU ID of the
device in use. Read and store it locally for future access. This
will be needed to find the correct PNVM (platform NVM) to pass to the
firmware.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.798744ad514e.Ibb0d88586a34acc904bf319974d791faafb7a905@changeid
|
|
FW is changing the max number of supported stations. To adapt to the
change we get the max number from the TLV and act according to the new
number.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
|
|
The legacy_httxpowerdiff in rtl8192se is pretty much the same as
the legacy_ht_txpowerdiff for other chips. Use the same name to
keep the consistency.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201006035928.5566-1-chiu@endlessm.com
|
|
clang static analysis reports this problem:
sdio.c:2403:3: warning: Attempt to free released memory
kfree(card->mpa_rx.buf);
^~~~~~~~~~~~~~~~~~~~~~~
When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again. If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().
So set both pointers to NULL when they are freed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com
|
|
In ath11k_mac_setup_iface_combinations(), if memory cannot be assigned
for the variable limits, then the memory assigned to combinations will
be leaked. Fix this.
Addresses-Coverity-ID: 1497534 ("Resource leaks")
Fixes: 2626c269702e ("ath11k: add interface_modes to hw_params")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004100218.311653-2-alex.dewar90@gmail.com
|
|
Also demote a non-conforming kernel-doc function header.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_drv' not described in 'iwl_drv'
drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_trans' not described in 'iwl_drv'
drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_op_mode' not described in 'iwl_drv'
drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'ucode_raw' not described in 'iwl_req_fw_callback'
drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'context' not described in 'iwl_req_fw_callback'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-16-lee.jones@linaro.org
|
|
Kerneldoc expects attributes/parameters to be in '@*.: ' format and
gets confused if the variable does not follow the type/attribute
definitions.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/devices.c:66: warning: Function parameter or member 'priv' not described in 'iwl_beacon_time_mask_low'
drivers/net/wireless/intel/iwlwifi/dvm/devices.c:66: warning: Function parameter or member 'tsf_bits' not described in 'iwl_beacon_time_mask_low'
drivers/net/wireless/intel/iwlwifi/dvm/devices.c:77: warning: Function parameter or member 'priv' not described in 'iwl_beacon_time_mask_high'
drivers/net/wireless/intel/iwlwifi/dvm/devices.c:77: warning: Function parameter or member 'tsf_bits' not described in 'iwl_beacon_time_mask_high'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-15-lee.jones@linaro.org
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'rate_n_flags' not described in 'iwl_mvm_hwrate_to_tx_status'
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'info' not described in 'iwl_mvm_hwrate_to_tx_status'
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1431: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_get_scd_ssn'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-14-lee.jones@linaro.org
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:695: warning: bad line:
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:701: warning: Function parameter or member 'priv' not described in 'iwl_set_rxon_channel'
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:701: warning: Function parameter or member 'ctx' not described in 'iwl_set_rxon_channel'
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:839: warning: Function parameter or member 'ctx' not described in 'iwl_full_rxon_required'
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:1029: warning: Function parameter or member 'priv' not described in 'iwlagn_commit_rxon'
drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:1029: warning: Function parameter or member 'ctx' not described in 'iwlagn_commit_rxon'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-13-lee.jones@linaro.org
|
|
2 of which do not attempt to document their parameters, 1 does a poor job.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:193: warning: Function parameter or member 'priv' not described in 'iwl_scan_cancel'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:205: warning: Function parameter or member 'priv' not described in 'iwl_scan_cancel_timeout'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'frame' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ta' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ies' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ie_len' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ssid' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ssid_len' not described in 'iwl_fill_probe_req'
drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'left' not described in 'iwl_fill_probe_req'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-12-lee.jones@linaro.org
|
|
Fix misnamed, and missing descriptions likely due to doc-rot.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Function parameter or member 'lq' not described in 'iwl_mvm_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Excess function parameter 'sync' description in 'iwl_mvm_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_update_smps'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'vif' not described in 'iwl_mvm_update_smps'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'smps_request' not described in 'iwl_mvm_update_smps'
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Excess function parameter 'smps_requests' description in 'iwl_mvm_update_smps'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-11-lee.jones@linaro.org
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'priv' not described in 'iwlagn_good_plcp_health'
drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'cur_ofdm' not described in 'iwlagn_good_plcp_health'
drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'cur_ofdm_ht' not described in 'iwlagn_good_plcp_health'
drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'msecs' not described in 'iwlagn_good_plcp_health'
drivers/net/wireless/intel/iwlwifi/dvm/rx.c:939: warning: Function parameter or member 'priv' not described in 'iwl_setup_rx_handlers'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-10-lee.jones@linaro.org
|
|
Looks as if it's never been used.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/mvm/ops.c:466:36: warning: ‘iwl_mvm_debug_names’ defined but not used [-Wunused-const-variable=]
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-9-lee.jones@linaro.org
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'priv' not described in 'iwl_prep_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'ctx' not described in 'iwl_prep_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'addr' not described in 'iwl_prep_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'is_ap' not described in 'iwl_prep_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'sta' not described in 'iwl_prep_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'priv' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'ctx' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'addr' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'is_ap' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'sta' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'sta_id_r' not described in 'iwl_add_station_common'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:390: warning: Function parameter or member 'priv' not described in 'iwl_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:390: warning: Function parameter or member 'sta_id' not described in 'iwl_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'priv' not described in 'iwl_remove_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'sta_id' not described in 'iwl_remove_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'addr' not described in 'iwl_remove_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:614: warning: Function parameter or member 'priv' not described in 'iwl_clear_ucode_stations'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:614: warning: Function parameter or member 'ctx' not described in 'iwl_clear_ucode_stations'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:648: warning: Function parameter or member 'priv' not described in 'iwl_restore_stations'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:648: warning: Function parameter or member 'ctx' not described in 'iwl_restore_stations'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'priv' not described in 'is_lq_table_valid'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'ctx' not described in 'is_lq_table_valid'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'lq' not described in 'is_lq_table_valid'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'priv' not described in 'iwl_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'ctx' not described in 'iwl_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'lq' not described in 'iwl_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'flags' not described in 'iwl_send_lq_cmd'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1270: warning: Function parameter or member 'priv' not described in 'iwlagn_alloc_bcast_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1270: warning: Function parameter or member 'ctx' not described in 'iwlagn_alloc_bcast_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1309: warning: Function parameter or member 'priv' not described in 'iwl_update_bcast_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1309: warning: Function parameter or member 'ctx' not described in 'iwl_update_bcast_station'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'priv' not described in 'iwl_sta_tx_modify_enable_tid'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'sta_id' not described in 'iwl_sta_tx_modify_enable_tid'
drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'tid' not described in 'iwl_sta_tx_modify_enable_tid'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-8-lee.jones@linaro.org
|
|
This is the only use of kerneldoc in the sourcefile and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'priv' not described in 'iwl_find_disconn_antenna'
drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'average_sig' not described in 'iwl_find_disconn_antenna'
drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'data' not described in 'iwl_find_disconn_antenna'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-6-lee.jones@linaro.org
|
|
Neither of these headers attempt to document any function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/lib.c:121: warning: Function parameter or member 'priv' not described in 'iwlagn_txfifo_flush'
drivers/net/wireless/intel/iwlwifi/dvm/lib.c:121: warning: Function parameter or member 'scd_q_msk' not described in 'iwlagn_txfifo_flush'
drivers/net/wireless/intel/iwlwifi/dvm/lib.c:779: warning: Function parameter or member 'priv' not described in 'iwlagn_set_rxon_chain'
drivers/net/wireless/intel/iwlwifi/dvm/lib.c:779: warning: Function parameter or member 'ctx' not described in 'iwlagn_set_rxon_chain'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-5-lee.jones@linaro.org
|
|
None of these headers attempt to document any function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'priv' not described in 'iwlagn_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'rate_n_flags' not described in 'iwlagn_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'info' not described in 'iwlagn_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlwifi/dvm/tx.c:1267: warning: Function parameter or member 'priv' not described in 'iwlagn_rx_reply_compressed_ba'
drivers/net/wireless/intel/iwlwifi/dvm/tx.c:1267: warning: Function parameter or member 'rxb' not described in 'iwlagn_rx_reply_compressed_ba'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-4-lee.jones@linaro.org
|
|
None of these headers attempt to document any function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:165: warning: cannot understand function prototype: 'const u16 expected_tpt_legacy[IWL_RATE_COUNT] = '
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:329: warning: Function parameter or member 'priv' not described in 'rs_program_fix_rate'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:329: warning: Function parameter or member 'lq_sta' not described in 'rs_program_fix_rate'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'tbl' not described in 'rs_collect_tx_data'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'scale_index' not described in 'rs_collect_tx_data'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'attempts' not described in 'rs_collect_tx_data'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'successes' not described in 'rs_collect_tx_data'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:681: warning: Function parameter or member 'sta' not described in 'rs_use_green'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'lq_sta' not described in 'rs_get_supported_rates'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'hdr' not described in 'rs_get_supported_rates'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'rate_type' not described in 'rs_get_supported_rates'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2628: warning: duplicate section name 'NOTE'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'priv' not described in 'rs_initialize_lq'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'sta' not described in 'rs_initialize_lq'
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'lq_sta' not described in 'rs_initialize_lq'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-3-lee.jones@linaro.org
|
|
None of these headers attempt to document any function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/dvm/main.c:388: warning: Function parameter or member 't' not described in 'iwl_bg_statistics_periodic'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:545: warning: Function parameter or member 't' not described in 'iwl_bg_ucode_trace'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:771: warning: Function parameter or member 'priv' not described in 'iwl_alive_start'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'priv' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'start_idx' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'num_events' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'mode' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'pos' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'buf' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'bufsz' not described in 'iwl_print_event_log'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'priv' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'capacity' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'num_wraps' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'next_entry' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'size' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'mode' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'pos' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'buf' not described in 'iwl_print_last_event_logs'
drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'bufsz' not described in 'iwl_print_last_event_logs'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-2-lee.jones@linaro.org
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the IIO fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kalle Valo says:
====================
wireless-drivers-next patches for v5.10
Third set of patches for v5.10. Lots of iwlwifi patches this time, but
also few patches ath11k and of course smaller changes to other
drivers.
Major changes:
rtw88
* properly recover from firmware crashes on 8822c
* dump firmware crash log
iwlwifi
* protected Target Wake Time (TWT) implementation
* support disabling 5.8GHz channels via ACPI
* support VHT extended NSS capability
* enable Target Wake Time (TWT) by default
ath11k
* improvements to QCA6390 PCI support to make it more usable
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johannes Berg says:
====================
Another set of changes, this time with:
* lots more S1G band support
* 6 GHz scanning, finally
* kernel-doc fixes
* non-split wiphy dump fixes in nl80211
* various other small cleanups/features
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ath.git patches for v5.10. Major changes:
ath11k
* improvements to QCA6390 PCI support, adding essential missing
features: ELF board files, packet log handling to avoid data stalls
and crash fixes
|
|
In bmps mode, beacons are filtered, and firmware is in charge
of monitoring the beacons and report changes or loss.
mac80211 must be advertised about such change to prevent it's
internal timer based beacon monitor to report beacon loss.
Fix that by setting/clearing the IEEE80211_VIF_BEACON_FILTER
vif flag on bmps entry/exit.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1592471863-31402-2-git-send-email-loic.poulain@linaro.org
|
|
These casts are not needed. No changes in functionality.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-9-git-send-email-kvalo@codeaurora.org
|
|
Host sends wmi command to allow hardware enter idle power
save mode in ath11k_mac_op_start function.
hw parameter idle_ps indicates whether idle power save is supported.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-8-git-send-email-kvalo@codeaurora.org
|
|
For QCA6390, Start a timer to update CE pipe 4 ring HP when shadow
register is enabled. Its' to avoid that HP isn't updated to target
register.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-7-git-send-email-kvalo@codeaurora.org
|
|
Start a timer to update REO HP if HP isn't updated to target.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-6-git-send-email-kvalo@codeaurora.org
|
|
The timer is to check if TCL HP isn't updated to target.
The timer will postpone itself if there are TX operations
during the interval, otherwise the timer handler updates
the HP again so the index value in HP register will be
forwarded to target register, and the timer stops afterwards.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-5-git-send-email-kvalo@codeaurora.org
|
|
For QCA6390, set wmi credit to 1 to avoid back-to-back write to
shadow register when shadow register is enabled.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-4-git-send-email-kvalo@codeaurora.org
|
|
To enable shadow register access, host needs to pass shadow
register configuration to firmware via qmi message. Host also
needs to update ring's HP or TP address to shadow register
address. The write operation to shadow register will be
forwarded to target register by hardware automatically, and
the write operation to shadow register is permitted even
when the target is in power save or sleep mode.
Update the shadow config whenever power up happens.
This feature is controlled by hw parameter supports_shadow_regs which is only
enabled for QCA6390.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-3-git-send-email-kvalo@codeaurora.org
|
|
For QCA6390, host can read and write registers below unwindowed
address directly without programming the window register. For
registers below bar0 + 4k - 32, host can read and write regardless
of the power save state. Shadow registers are located below
bar0 + 4K - 32.
Before MHI power up, there is no need to wakeup MHI so ini_done is
added to indicate it.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-2-git-send-email-kvalo@codeaurora.org
|
|
With QCA6390 when doing rmmod the kernel crashed. The reason was that the
destroy functions ath11k_debugfs_pdev_destroy() and ath11k_debugfs_soc_destroy()
accidentally had swapped the debugfs directories and
ath11k_debugfs_soc_destroy() was removing an already removed directory, which
crashed the kernel.
The source of confusion is badly named function and variable names. I think the
best way to clean this up is actually to merge the corresponding functions, but
that's for another patch. Let's first just fix the crash.
[ 43.430245] ------------[ cut here ]------------
[ 43.430247] DEBUG_LOCKS_WARN_ON(1)
[ 43.430253] WARNING: CPU: 4 PID: 2148 at kernel/locking/lockdep.c:183 check_wait_context+0x231/0x290
[ 43.430255] Modules linked in: ath11k_pci(-) ath11k qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core
[ 43.430261] CPU: 4 PID: 2148 Comm: rmmod Not tainted 5.9.0-rc5-wt-ath+ #198
[ 43.430262] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[ 43.430265] RIP: 0010:check_wait_context+0x231/0x290
[ 43.430267] Code: ff ff e8 42 83 bf 00 85 c0 74 f0 44 8b 15 af 0d 90 01 45 85 d2 75 e4 48 c7 c6 7f e5 37 8d 48 c7 c7 8d 81 34 8d e8 c3 01 fa ff <0f> 0b 31 c0 e9 01 fe ff f
[ 43.430268] RSP: 0018:ffffa36140f23bf8 EFLAGS: 00010082
[ 43.430270] RAX: 0000000000000000 RBX: e7a8b0f303fcdbd7 RCX: 0000000000000000
[ 43.430272] RDX: 0000000000000016 RSI: ffffffff8bee5824 RDI: ffffffff8d66fd60
[ 43.430273] RBP: ffff936573551d80 R08: 0000000a1ca4fc0e R09: 0000000000000016
[ 43.430275] R10: 0000000000000046 R11: ffffa36140f23a35 R12: ffff936573552670
[ 43.430276] R13: 0000000000000000 R14: ffff936573552638 R15: 0000000000000001
[ 43.430278] FS: 00007f03e78c8700(0000) GS:ffff93659c800000(0000) knlGS:0000000000000000
[ 43.430280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.430282] CR2: 000056424768fee8 CR3: 00000001f7b46003 CR4: 00000000003706e0
[ 43.430283] Call Trace:
[ 43.430286] __lock_acquire+0x1c0/0x6e0
[ 43.430289] lock_acquire+0xb6/0x270
[ 43.430292] ? lockref_get+0x9/0x20
[ 43.430295] ? lock_acquire+0xb6/0x270
[ 43.430297] ? simple_pin_fs+0x1d/0xa0
[ 43.430299] ? find_held_lock+0x32/0x90
[ 43.430303] _raw_spin_lock+0x2c/0x70
[ 43.430305] ? lockref_get+0x9/0x20
[ 43.430306] lockref_get+0x9/0x20
[ 43.430308] simple_recursive_removal+0x31/0x2f0
[ 43.430310] ? debugfs_rename+0x40/0x40
[ 43.430312] debugfs_remove+0x3b/0x60
[ 43.430320] ath11k_debug_soc_destroy+0x10/0x20 [ath11k]
[ 43.430325] ath11k_core_deinit+0xab/0xd0 [ath11k]
[ 43.430327] ath11k_pci_remove+0x1b/0xb0 [ath11k_pci]
[ 43.430329] pci_device_remove+0x36/0x90
[ 43.430331] __device_release_driver+0x16c/0x220
[ 43.430333] driver_detach+0xcf/0x110
[ 43.430334] bus_remove_driver+0x4d/0xa2
[ 43.430336] pci_unregister_driver+0x25/0xa0
[ 43.430338] __do_sys_delete_module+0x163/0x240
[ 43.430340] ? lockdep_hardirqs_on_prepare.part.0+0x9f/0x140
[ 43.430342] ? syscall_enter_from_user_mode+0x1d/0x50
[ 43.430343] ? trace_hardirqs_on+0x1c/0x100
[ 43.430345] do_syscall_64+0x33/0x40
[ 43.430347] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 43.430348] RIP: 0033:0x7f03e73f89e7
[ 43.430350] Code: 73 01 c3 48 8b 0d b1 c4 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c
[ 43.430351] RSP: 002b:00007ffdb61d6198 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 43.430352] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f03e73f89e7
[ 43.430353] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000556f67d922e8
[ 43.430354] RBP: 0000556f67d92280 R08: 0000000000000000 R09: 1999999999999999
[ 43.430355] R10: 0000000000000883 R11: 0000000000000202 R12: 00007ffdb61d63b0
[ 43.430356] R13: 00007ffdb61d7917 R14: 0000000000000000 R15: 0000556f67d92280
[ 43.430358] irq event stamp: 240801
[ 43.430360] hardirqs last enabled at (240801): [<ffffffff8c02d0e5>] cmpxchg_double_slab.constprop.0+0x185/0x1a0
[ 43.430362] hardirqs last disabled at (240800): [<ffffffff8c02d03e>] cmpxchg_double_slab.constprop.0+0xde/0x1a0
[ 43.430364] softirqs last enabled at (240680): [<ffffffffc01eee37>] ath11k_pci_read32+0x87/0xe0 [ath11k_pci]
[ 43.430365] softirqs last disabled at (240678): [<ffffffffc01eedf8>] ath11k_pci_read32+0x48/0xe0 [ath11k_pci]
[ 43.430366] ---[ end trace dc96c4234c294fe8 ]---
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-6-git-send-email-kvalo@codeaurora.org
|
|
Fix warning caused by lockdep_assert_held when CONFIG_LOCKDEP is enabled.
[ 271.940647] WARNING: CPU: 6 PID: 0 at drivers/net/wireless/ath/ath11k/hal.c:818 ath11k_hal_srng_access_begin+0x31/0x40 [ath11k]
[ 271.940655] Modules linked in: qrtr_mhi qrtr ns ath11k_pci mhi ath11k qmi_helpers nvme nvme_core
[ 271.940675] CPU: 6 PID: 0 Comm: swapper/6 Kdump: loaded Tainted: G W 5.9.0-rc5-kalle-bringup-wt-ath+ #4
[ 271.940682] Hardware name: Dell Inc. Inspiron 7590/08717F, BIOS 1.3.0 07/22/2019
[ 271.940698] RIP: 0010:ath11k_hal_srng_access_begin+0x31/0x40 [ath11k]
[ 271.940708] Code: 48 89 f3 85 c0 75 11 48 8b 83 a8 00 00 00 8b 00 89 83 b0 00 00 00 5b c3 48 8d 7e 58 be ff ff ff ff e8 53 24 ec fa 85 c0 75 dd <0f> 0b eb d9 90 66 2e 0f 1f 84 00 00 00 00 00 55 53 48 89 f3 8b 35
[ 271.940718] RSP: 0018:ffffbdf0c0230df8 EFLAGS: 00010246
[ 271.940727] RAX: 0000000000000000 RBX: ffffa12b34e67680 RCX: ffffa12b57a0d800
[ 271.940735] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffa12b34e676d8
[ 271.940742] RBP: ffffa12b34e60000 R08: 0000000000000001 R09: 0000000000000001
[ 271.940753] R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000
[ 271.940763] R13: ffffa12b34e60000 R14: ffffa12b34e60000 R15: 0000000000000000
[ 271.940774] FS: 0000000000000000(0000) GS:ffffa12b5a400000(0000) knlGS:0000000000000000
[ 271.940788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 271.940798] CR2: 00007f8bef282008 CR3: 00000001f4224004 CR4: 00000000003706e0
[ 271.940805] Call Trace:
[ 271.940813] <IRQ>
[ 271.940835] ath11k_dp_tx_completion_handler+0x9e/0x950 [ath11k]
[ 271.940847] ? lock_acquire+0xba/0x3b0
[ 271.940876] ath11k_dp_service_srng+0x5a/0x2e0 [ath11k]
[ 271.940893] ath11k_pci_ext_grp_napi_poll+0x1e/0x80 [ath11k_pci]
[ 271.940908] net_rx_action+0x283/0x4f0
[ 271.940931] __do_softirq+0xcb/0x499
[ 271.940950] asm_call_on_stack+0x12/0x20
[ 271.940963] </IRQ>
[ 271.940979] do_softirq_own_stack+0x4d/0x60
[ 271.940991] irq_exit_rcu+0xb0/0xc0
[ 271.941001] common_interrupt+0xce/0x190
[ 271.941014] asm_common_interrupt+0x1e/0x40
[ 271.941026] RIP: 0010:cpuidle_enter_state+0x115/0x500
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-5-git-send-email-kvalo@codeaurora.org
|
|
The conf_mutex is not use and lead below deadlock, remove it to solve
the deadlock issue.
[ 44.967496] NET: Registered protocol family 42
[ 45.119629] ath11k_pci 0000:06:00.0: WARNING: ath11k PCI support is experimental!
[ 45.120087] ath11k_pci 0000:06:00.0: BAR 0: assigned [mem 0xdc000000-0xdc0fffff 64bit]
[ 45.120108] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 45.206525] ath11k_pci 0000:06:00.0: aspm 0x42 changed to 0x40
[ 45.207430] mhi 0000:06:00.0: Requested to power ON
[ 45.208609] mhi 0000:06:00.0: Power on setup success
[ 46.190711] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0x101 soc_id 0xffffffff
[ 46.190729] ath11k_pci 0000:06:00.0: fw_version 0x306a70f fw_build_timestamp 2000-01-01 00:00 fw_build_id
1]: Starting Load/Save RF Kill Switch Status...
[ 46.385118] ath11k_pci 0000:06:00.0 wlp6s0: renamed from wlan0
1]: Started Load/Save RF Kill Switch Status.
[ 53.566669] wlp6s0: authenticate with 00:03:7f:48:dd:bf
[ 53.809092] wlp6s0: send auth to 00:03:7f:48:dd:bf (try 1/3)
[ 53.816490] wlp6s0: authenticated
[ 53.818618] wlp6s0: associate with 00:03:7f:48:dd:bf (try 1/3)
[ 53.820839] wlp6s0: RX AssocResp from 00:03:7f:48:dd:bf (capab=0x1 status=0 aid=2)
[ 53.834859]
[ 53.834861] ======================================================
[ 53.834862] WARNING: possible circular locking dependency detected
[ 53.834863] 5.9.0-rc5-wt-ath+ #198 Not tainted
[ 53.834864] ------------------------------------------------------
[ 53.834865] kworker/u16:3/166 is trying to acquire lock:
[ 53.834866] ffff8c4b37184f78 (&ar->conf_mutex){+.+.}-{3:3}, at: ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.834875]
[ 53.834875] but task is already holding lock:
[ 53.834876] ffff8c4b37182808 (&local->iflist_mtx){+.+.}-{3:3}, at: ieee80211_set_associated+0x167/0x360
[ 53.834879]
[ 53.834879] which lock already depends on the new lock.
[ 53.834879]
[ 53.834880]
[ 53.834880] the existing dependency chain (in reverse order) is:
[ 53.834881]
[ 53.834881] -> #1 (&local->iflist_mtx){+.+.}-{3:3}:
[ 53.834884] __lock_acquire+0x3bf/0x6e0
[ 53.834886] lock_acquire+0xb6/0x270
[ 53.834887] __mutex_lock+0x88/0x8e0
[ 53.834890] ieee80211_set_hw_80211_encap+0x3e/0x1f0
[ 53.834895] ath11k_mac_op_add_interface+0x348/0x7f0 [ath11k]
[ 53.834897] drv_add_interface+0x7c/0x190
[ 53.834899] ieee80211_do_open+0x552/0x9a0
[ 53.834901] __dev_open+0xe5/0x190
[ 53.834902] __dev_change_flags+0x1c6/0x230
[ 53.834903] dev_change_flags+0x1c/0x50
[ 53.834905] do_setlink+0x246/0xc60
[ 53.834906] __rtnl_newlink+0x607/0x990
[ 53.834907] rtnl_newlink+0x3f/0x60
[ 53.834908] rtnetlink_rcv_msg+0x174/0x490
[ 53.834910] netlink_rcv_skb+0x42/0x100
[ 53.834911] netlink_unicast+0x18c/0x250
[ 53.834912] netlink_sendmsg+0x227/0x460
[ 53.834914] sock_sendmsg+0x59/0x60
[ 53.834915] ____sys_sendmsg+0x1f5/0x230
[ 53.834916] ___sys_sendmsg+0x70/0xb0
[ 53.834917] __sys_sendmsg+0x54/0xa0
[ 53.834919] do_syscall_64+0x33/0x40
[ 53.834920] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.834921]
[ 53.834921] -> #0 (&ar->conf_mutex){+.+.}-{3:3}:
[ 53.834923] check_prev_add+0x98/0x9f0
[ 53.834925] validate_chain+0x404/0x6c0
[ 53.834926] __lock_acquire+0x3bf/0x6e0
[ 53.834927] lock_acquire+0xb6/0x270
[ 53.834929] __mutex_lock+0x88/0x8e0
[ 53.834934] ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.834935] ieee80211_hw_config+0xb3/0x270
[ 53.834937] ieee80211_set_associated+0x17c/0x360
[ 53.834938] ieee80211_assoc_success.constprop.0+0x5a2/0xc80
[ 53.834940] ieee80211_rx_mgmt_assoc_resp+0x16a/0x350
[ 53.834941] ieee80211_sta_rx_queued_mgmt+0xca/0x410
[ 53.834943] ieee80211_iface_work+0x1f3/0x350
[ 53.834945] process_one_work+0x265/0x5d0
[ 53.834946] worker_thread+0x49/0x300
[ 53.834948] kthread+0x135/0x150
[ 53.834949] ret_from_fork+0x22/0x30
[ 53.834950]
[ 53.834950] other info that might help us debug this:
[ 53.834950]
[ 53.834951] Possible unsafe locking scenario:
[ 53.834951]
[ 53.834952] CPU0 CPU1
[ 53.834952] ---- ----
[ 53.834953] lock(&local->iflist_mtx);
[ 53.834954] lock(&ar->conf_mutex);
[ 53.834955] lock(&local->iflist_mtx);
[ 53.834956] lock(&ar->conf_mutex);
[ 53.834957]
[ 53.834957] *** DEADLOCK ***
[ 53.834957]
[ 53.834958] 4 locks held by kworker/u16:3/166:
[ 53.834959] #0: ffff8c4b37c22948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[ 53.834961] #1: ffffa98300abfe70 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[ 53.834963] #2: ffff8c4b371e4cd0 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_rx_queued_mgmt+0x4b/0x410
[ 53.834965] #3: ffff8c4b37182808 (&local->iflist_mtx){+.+.}-{3:3}, at: ieee80211_set_associated+0x167/0x360
[ 53.834968]
[ 53.834968] stack backtrace:
[ 53.834969] CPU: 1 PID: 166 Comm: kworker/u16:3 Not tainted 5.9.0-rc5-wt-ath+ #198
[ 53.834970] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[ 53.834972] Workqueue: phy0 ieee80211_iface_work
[ 53.834974] Call Trace:
[ 53.834976] dump_stack+0x77/0xa0
[ 53.834978] check_noncircular+0x15d/0x180
[ 53.834980] check_prev_add+0x98/0x9f0
[ 53.834982] ? add_chain_cache+0x143/0x440
[ 53.834984] validate_chain+0x404/0x6c0
[ 53.834986] __lock_acquire+0x3bf/0x6e0
[ 53.834988] lock_acquire+0xb6/0x270
[ 53.834993] ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.834999] ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.835001] __mutex_lock+0x88/0x8e0
[ 53.835006] ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.835007] ? sched_clock_cpu+0xc/0xb0
[ 53.835009] ? __lock_release+0x179/0x2c0
[ 53.835014] ath11k_mac_op_config+0x16/0x30 [ath11k]
[ 53.835016] ieee80211_hw_config+0xb3/0x270
[ 53.835018] ieee80211_set_associated+0x17c/0x360
[ 53.835019] ieee80211_assoc_success.constprop.0+0x5a2/0xc80
[ 53.835021] ? lockdep_hardirqs_on_prepare.part.0+0x9f/0x140
[ 53.835023] ? cmpxchg_double_slab.constprop.0+0x185/0x1a0
[ 53.835025] ? trace_hardirqs_on+0x1c/0x100
[ 53.835027] ? __slab_free+0x8f/0x330
[ 53.835029] ? slab_free_freelist_hook+0xf8/0x150
[ 53.835031] ? ieee802_11_parse_elems_crc+0x147/0x1d0
[ 53.835032] ? kfree+0x2b0/0x2d0
[ 53.835034] ? ieee802_11_parse_elems_crc+0x147/0x1d0
[ 53.835036] ieee80211_rx_mgmt_assoc_resp+0x16a/0x350
[ 53.835041] ieee80211_sta_rx_queued_mgmt+0xca/0x410
[ 53.835043] ? __lock_acquire+0x3bf/0x6e0
[ 53.835045] ? lock_acquire+0xb6/0x270
[ 53.835046] ? skb_dequeue+0x13/0x70
[ 53.835048] ? find_held_lock+0x32/0x90
[ 53.835049] ? sched_clock_cpu+0xc/0xb0
[ 53.835051] ? mark_held_locks+0x50/0x80
[ 53.835053] ? lockdep_hardirqs_on_prepare.part.0+0x9f/0x140
[ 53.835054] ? _raw_spin_unlock_irqrestore+0x34/0x40
[ 53.835056] ? trace_hardirqs_on+0x1c/0x100
[ 53.835058] ieee80211_iface_work+0x1f3/0x350
[ 53.835060] process_one_work+0x265/0x5d0
[ 53.835062] worker_thread+0x49/0x300
[ 53.835063] ? process_one_work+0x5d0/0x5d0
[ 53.835065] kthread+0x135/0x150
[ 53.835066] ? kthread_create_worker_on_cpu+0x60/0x60
[ 53.835068] ret_from_fork+0x22/0x30
[ 53.835075] wlp6s0: associated
[ 53.835132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-4-git-send-email-kvalo@codeaurora.org
|
|
For QCA6390 we first need to call free_irq() and only then disable_msi(). Otherwise a
kernel BUG below will happen. Also free core, hal_srng and ce resources during
ath11k_pci_remove().
[ 1089.425506] ------------[ cut here ]------------
[ 1089.425510] kernel BUG at drivers/pci/msi.c:375!
[ 1089.425514] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 1089.425517] CPU: 1 PID: 20539 Comm: rmmod Not tainted 5.9.0-rc5-wt-ath+ #198
[ 1089.425519] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[ 1089.425523] RIP: 0010:free_msi_irqs+0x184/0x1b0
[ 1089.425526] Code: 14 85 c0 0f 84 cc fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 bc fe ff ff 8b 7b 10 01 ef e8 c3 01 bf ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 b0 00 00 0
[ 1089.425528] RSP: 0018:ffffb128c0cf7dd0 EFLAGS: 00010282
[ 1089.425530] RAX: ffff947d67549000 RBX: ffff947cd2d25200 RCX: 0000000000000000
[ 1089.425532] RDX: ffff947d94a6f928 RSI: ffff947d94a6fa18 RDI: 0000000000000099
[ 1089.425533] RBP: 0000000000000000 R08: ffff947d67549000 R09: ffffffff86670050
[ 1089.425535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff947d96c194f0
[ 1089.425537] R13: ffff947d96c19000 R14: 0000000000000000 R15: ffffffffc0225250
[ 1089.425539] FS: 00007f97c44ed700(0000) GS:ffff947d9c200000(0000) knlGS:0000000000000000
[ 1089.425541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1089.425543] CR2: 00007f97c408d701 CR3: 0000000192bc0006 CR4: 00000000003706e0
[ 1089.425544] Call Trace:
[ 1089.425549] ath11k_pci_remove+0x2b/0x90 [ath11k_pci]
[ 1089.425553] pci_device_remove+0x36/0x90
[ 1089.425556] __device_release_driver+0x16c/0x220
[ 1089.425559] driver_detach+0xcf/0x110
[ 1089.425561] bus_remove_driver+0x4d/0xa2
[ 1089.425564] pci_unregister_driver+0x25/0xa0
[ 1089.425568] __do_sys_delete_module+0x163/0x240
[ 1089.425571] ? trace_hardirqs_on+0x1c/0x100
[ 1089.425575] do_syscall_64+0x33/0x40
[ 1089.425577] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1089.425579] RIP: 0033:0x7f97c401d9e7
[ 1089.425581] Code: 73 01 c3 48 8b 0d b1 c4 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c
[ 1089.425583] RSP: 002b:00007fff1e0fb728 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1089.425585] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97c401d9e7
[ 1089.425587] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005585aad022e8
[ 1089.425589] RBP: 00005585aad02280 R08: 0000000000000000 R09: 1999999999999999
[ 1089.425591] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fff1e0fb940
[ 1089.425592] R13: 00007fff1e0fd917 R14: 0000000000000000 R15: 00005585aad02280
[ 1089.425596] Modules linked in: ath11k_pci(-) ath11k qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core [last unloaded: mhi]
[ 1089.425603] ---[ end trace 2a81926cc0708a38 ]---
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-3-git-send-email-kvalo@codeaurora.org
|
|
Add packet log support for QCA6390, otherwise the data connection will stall
within a minute or so. Enable it via debugfs and use trace-cmd to capture the
pktlogs.
echo 0xffff 1 > /sys/kernel/debug/ath11k/qca6390\ hw2.0/mac0/pktlog_filter
The mon status ring doesn't support interrupt so far, so host starts
a timer to reap this ring. The timer handler also reaps the
rxdma_err_dst_ring in case of monitor mode.
As QCA6390 requires bss created ahead of starting vdev, so check
vdev_start_delay for monitor mode.
For QCA6390, it uses wbm_desc_rel_ring to return descriptors.
It also uses rx_refill_buf_ring to fill mon buffer instead of
rxdma_mon_buf_ring.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-2-git-send-email-kvalo@codeaurora.org
|
|
With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc
is being called in non-atomic context.
To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL in idr_alloc.
BUG: sleeping function called from invalid context at mm/slab.h:393
[ 59.805451] Call trace:
[ 59.807971] ___might_sleep+0x110/0x118
[ 59.811915] __might_sleep+0x50/0x84
[ 59.815593] kmem_cache_alloc+0x60/0x3e0
[ 59.819630] radix_tree_node_alloc+0x4c/0xe8
[ 59.824014] radix_tree_extend+0x8c/0x164
[ 59.828135] idr_get_free_cmn+0xa4/0x27c
[ 59.832167] idr_alloc_cmn+0x70/0xe8
[ 59.835856] ath11k_dp_rxbufs_replenish+0x1e8/0x310 [ath11k]
[ 59.841687] ath11k_dp_rxdma_ring_buf_setup+0x50/0x60 [ath11k]
[ 59.847693] ath11k_dp_rx_pdev_alloc+0x260/0x4d8 [ath11k]
[ 59.853248] ath11k_dp_pdev_alloc+0x40/0xc4 [ath11k]
[ 59.858357] ath11k_core_qmi_firmware_ready+0x3c4/0x490 [ath11k]
[ 59.864538] ath11k_qmi_driver_event_work+0x4c8/0x1178 [ath11k]
[ 59.870620] process_one_work+0x208/0x434
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601399736-3210-9-git-send-email-kvalo@codeaurora.org
|
|
With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc
is being called in non-atomic context.
To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL kzalloc.
[ 357.217088] BUG: sleeping function called from invalid context at mm/slab.h:498
[ 357.217091] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
[ 357.217092] INFO: lockdep is turned off.
[ 357.217095] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.9.0-rc5-wt-ath+ #196
[ 357.217096] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[ 357.217097] Call Trace:
[ 357.217098] <IRQ>
[ 357.217107] ? ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k]
[ 357.217110] dump_stack+0x77/0xa0
[ 357.217113] ___might_sleep.cold+0xa6/0xb6
[ 357.217116] kmem_cache_alloc_trace+0x1f2/0x270
[ 357.217122] ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k]
[ 357.217129] ath11k_htt_pull_ppdu_stats.isra.0+0x96/0x270 [ath11k]
[ 357.217135] ath11k_dp_htt_htc_t2h_msg_handler+0xe7/0x1d0 [ath11k]
[ 357.217137] ? trace_hardirqs_on+0x1c/0x100
[ 357.217143] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k]
[ 357.217149] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k]
[ 357.217151] ? handle_irq_event+0x70/0xa8
[ 357.217154] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci]
[ 357.217157] tasklet_action_common.constprop.0+0xd4/0xf0
[ 357.217160] __do_softirq+0xc9/0x482
[ 357.217162] asm_call_on_stack+0x12/0x20
[ 357.217163] </IRQ>
[ 357.217166] do_softirq_own_stack+0x49/0x60
[ 357.217167] irq_exit_rcu+0x9a/0xd0
[ 357.217169] common_interrupt+0xa1/0x190
[ 357.217171] asm_common_interrupt+0x1e/0x40
[ 357.217173] RIP: 0010:cpu_idle_poll.isra.0+0x2e/0x60
[ 357.217175] Code: 8b 35 26 27 74 69 e8 11 c8 3d ff e8 bc fa 42 ff e8 e7 9f 4a ff fb 65 48 8b 1c 25 80 90 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 0
[ 357.217177] RSP: 0018:ffffffff97403ee0 EFLAGS: 00000202
[ 357.217178] RAX: 0000000000000001 RBX: ffffffff9742b8c0 RCX: 0000000000b890ca
[ 357.217180] RDX: 0000000000b890ca RSI: 0000000000000001 RDI: ffffffff968d0c49
[ 357.217181] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[ 357.217182] R10: ffffffff9742b8c0 R11: 0000000000000046 R12: 0000000000000000
[ 357.217183] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000066fdf520
[ 357.217186] ? cpu_idle_poll.isra.0+0x19/0x60
[ 357.217189] do_idle+0x5f/0xe0
[ 357.217191] cpu_startup_entry+0x14/0x20
[ 357.217193] start_kernel+0x443/0x464
[ 357.217196] secondary_startup_64+0xa4/0xb0
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601399736-3210-8-git-send-email-kvalo@codeaurora.org
|
|
After base_lock which occupy by ath11k_regd_update, the softirq run for
WMI_REG_CHAN_LIST_CC_EVENTID maybe arrived and it also need to accuire
the spin lock, then deadlock happend, change to disable softirqis to solve it.
[ 235.576990] ================================
[ 235.576991] WARNING: inconsistent lock state
[ 235.576993] 5.9.0-rc5-wt-ath+ #196 Not tainted
[ 235.576994] --------------------------------
[ 235.576995] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 235.576997] kworker/u16:1/98 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 235.576998] ffff9655f75cad98 (&ab->base_lock){+.?.}-{2:2}, at: ath11k_regd_update+0x28/0x1d0 [ath11k]
[ 235.577009] {IN-SOFTIRQ-W} state was registered at:
[ 235.577013] __lock_acquire+0x219/0x6e0
[ 235.577015] lock_acquire+0xb6/0x270
[ 235.577018] _raw_spin_lock+0x2c/0x70
[ 235.577023] ath11k_reg_chan_list_event.isra.0+0x10d/0x1e0 [ath11k]
[ 235.577028] ath11k_wmi_tlv_op_rx+0x3c3/0x560 [ath11k]
[ 235.577033] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k]
[ 235.577039] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k]
[ 235.577041] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci]
[ 235.577043] tasklet_action_common.constprop.0+0xd4/0xf0
[ 235.577045] __do_softirq+0xc9/0x482
[ 235.577046] asm_call_on_stack+0x12/0x20
[ 235.577048] do_softirq_own_stack+0x49/0x60
[ 235.577049] irq_exit_rcu+0x9a/0xd0
[ 235.577050] common_interrupt+0xa1/0x190
[ 235.577052] asm_common_interrupt+0x1e/0x40
[ 235.577053] cpu_idle_poll.isra.0+0x2e/0x60
[ 235.577055] do_idle+0x5f/0xe0
[ 235.577056] cpu_startup_entry+0x14/0x20
[ 235.577058] start_kernel+0x443/0x464
[ 235.577060] secondary_startup_64+0xa4/0xb0
[ 235.577061] irq event stamp: 432035
[ 235.577063] hardirqs last enabled at (432035): [<ffffffff968d12b4>] _raw_spin_unlock_irqrestore+0x34/0x40
[ 235.577064] hardirqs last disabled at (432034): [<ffffffff968d10d3>] _raw_spin_lock_irqsave+0x63/0x80
[ 235.577066] softirqs last enabled at (431998): [<ffffffff967115c1>] inet6_fill_ifla6_attrs+0x3f1/0x430
[ 235.577067] softirqs last disabled at (431996): [<ffffffff9671159f>] inet6_fill_ifla6_attrs+0x3cf/0x430
[ 235.577068]
[ 235.577068] other info that might help us debug this:
[ 235.577069] Possible unsafe locking scenario:
[ 235.577069]
[ 235.577070] CPU0
[ 235.577070] ----
[ 235.577071] lock(&ab->base_lock);
[ 235.577072] <Interrupt>
[ 235.577073] lock(&ab->base_lock);
[ 235.577074]
[ 235.577074] *** DEADLOCK ***
[ 235.577074]
[ 235.577075] 3 locks held by kworker/u16:1/98:
[ 235.577076] #0: ffff9655f75b1d48 ((wq_completion)ath11k_qmi_driver_event){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[ 235.577079] #1: ffffa33cc02f3e70 ((work_completion)(&ab->qmi.event_work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[ 235.577081] #2: ffff9655f75cad50 (&ab->core_lock){+.+.}-{3:3}, at: ath11k_core_qmi_firmware_ready.part.0+0x4e/0x160 [ath11k]
[ 235.577087]
[ 235.577087] stack backtrace:
[ 235.577088] CPU: 3 PID: 98 Comm: kworker/u16:1 Not tainted 5.9.0-rc5-wt-ath+ #196
[ 235.577089] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[ 235.577095] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k]
[ 235.577096] Call Trace:
[ 235.577100] dump_stack+0x77/0xa0
[ 235.577102] mark_lock_irq.cold+0x15/0x3c
[ 235.577104] mark_lock+0x1d7/0x540
[ 235.577105] mark_usage+0xc7/0x140
[ 235.577107] __lock_acquire+0x219/0x6e0
[ 235.577108] ? sched_clock_cpu+0xc/0xb0
[ 235.577110] lock_acquire+0xb6/0x270
[ 235.577116] ? ath11k_regd_update+0x28/0x1d0 [ath11k]
[ 235.577118] ? atomic_notifier_chain_register+0x2d/0x40
[ 235.577120] _raw_spin_lock+0x2c/0x70
[ 235.577125] ? ath11k_regd_update+0x28/0x1d0 [ath11k]
[ 235.577130] ath11k_regd_update+0x28/0x1d0 [ath11k]
[ 235.577136] __ath11k_mac_register+0x3fb/0x480 [ath11k]
[ 235.577141] ath11k_mac_register+0x119/0x180 [ath11k]
[ 235.577146] ath11k_core_pdev_create+0x17/0xe0 [ath11k]
[ 235.577150] ath11k_core_qmi_firmware_ready.part.0+0x65/0x160 [ath11k]
[ 235.577155] ath11k_qmi_driver_event_work+0x1c5/0x230 [ath11k]
[ 235.577158] process_one_work+0x265/0x5d0
[ 235.577160] worker_thread+0x49/0x300
[ 235.577161] ? process_one_work+0x5d0/0x5d0
[ 235.577163] kthread+0x135/0x150
[ 235.577164] ? kthread_create_worker_on_cpu+0x60/0x60
[ 235.577166] ret_from_fork+0x22/0x30
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601399736-3210-7-git-send-email-kvalo@codeaurora.org
|
|
QCA6390 does not support monitor mode at the moment so disable it altogether,
using a hack as mac80211 does not support disabling it otherwise. Add a boolean
to hw_params to know if hardware supports monitor mode.
IPQ8074 continues to support monitor mode normally.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601399736-3210-6-git-send-email-kvalo@codeaurora.org
|