aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-07-15ipw2200: use generic power managementVaibhav Gupta1-23/+7
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629072525.156154-3-vaibhavgupta40@gmail.com
2020-07-15ipw2100: use generic power managementVaibhav Gupta1-24/+7
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629072525.156154-2-vaibhavgupta40@gmail.com
2020-07-15adm8211: use generic power managementVaibhav Gupta1-20/+5
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In the case of adm8211, after removing PCI helper functions, .suspend() and .resume() became empty-body functions. Hence, define them NULL and use dev_pm_ops. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629035031.169670-1-vaibhavgupta40@gmail.com
2020-07-15orinoco: use generic power managementVaibhav Gupta5-31/+13
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. PCI drivers are not expected to invoke PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state(), etc. Their tasks are completed by PCI core itself. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624174048.64754-1-vaibhavgupta40@gmail.com
2020-07-15rtl818x_pci: use generic power managementVaibhav Gupta1-19/+4
Earlier, drivers had to manage the device's power states, and related operations, themselves. With the generic approach, these are done by PCI core. The only driver-specific jobs, .suspend() and .resume() doing were invoking PCI helper functions pci_save/restore_state() and pci_set_power_state(). This is not recommeneded as PCI core takes care of that. Hence they became empty-body functions, thus define them NULL. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623094454.12427-1-vaibhavgupta40@gmail.com
2020-07-15rtlwifi: rtl8192cu: Free ieee80211_hw if probing failsReto Schneider1-0/+1
In case of an error, no one will use the allocated structure. Call ieee80211_free_hw, same as in rtl_usb_disconnect. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-4-code@reto-schneider.ch
2020-07-15rtlwifi: rtl8192cu: Prevent leaking urbReto Schneider1-1/+4
If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch
2020-07-15rtlwifi: rtl8192cu: Fix deadlockReto Schneider1-2/+4
Prevent code from calling itself indirectly, causing the driver to hang and consume 100% CPU. Without this fix, the following script can bring down a single CPU system: ``` while true; do rmmod rtl8192cu modprobe rtl8192cu done ``` Signed-off-by: Reto Schneider <code@reto-schneider.ch> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-2-code@reto-schneider.ch
2020-07-15rtlwifi: rtl8192cu: Remove uninitialized_var() usageKees Cook1-2/+2
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL, and avoid sending garbage by returning. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: dc0313f46664 ("rtlwifi: rtl8192cu: Add routine hw") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200620033007.1444705-6-keescook@chromium.org
2020-07-15b43: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL. No later NULL deref is possible due to the early returns outside of the (phy->rev >= 7 && phy->rev < 19) case, which explicitly tests for NULL. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 58619b14d106 ("b43: move under broadcom vendor directory") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200620033007.1444705-5-keescook@chromium.org
2020-07-15orinoco_usb: fix spelling mistakeFlavio Suligoi1-3/+3
Fix typo: "EZUSB_REQUEST_TRIGER" --> "EZUSB_REQUEST_TRIGGER" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200619093102.29487-1-f.suligoi@asem.it
2020-07-15rtlwifi: rtl8188ee: Fix endian issueLarry Finger1-1/+1
Sparse reports the following issue: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: warning: incorrect type in initializer (different base types) drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: expected restricted __le32 [usertype] *pdesc drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: got unsigned int [usertype] * Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604005733.7905-3-Larry.Finger@lwfinger.net
2020-07-15rtlwifi: Fix endian issue in ps.cLarry Finger1-6/+6
Sparse reports the following endian issues: CHECK drivers/net/wireless/realtek/rtlwifi/ps.c drivers/net/wireless/realtek/rtlwifi/ps.c:772:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:772:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:775:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:775:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:778:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:778:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:867:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:867:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:870:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:870:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:873:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:873:42: warning: cast to restricted __le32 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604005733.7905-2-Larry.Finger@lwfinger.net
2020-07-15broadcom: fix wiki website urlFlavio Suligoi2-3/+3
In some b43 files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605154112.16277-6-f.suligoi@asem.it
2020-07-15atmel: fix wiki website urlFlavio Suligoi1-1/+1
In at76c50x-usb.c the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605154112.16277-5-f.suligoi@asem.it
2020-07-15wireless: fix wiki website url in main KconfigFlavio Suligoi1-1/+1
The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605154112.16277-3-f.suligoi@asem.it
2020-07-15rtw88: coex: Fix ACL Tx pause during BT inquiry/page.Zong-Zhe Yang7-29/+108
Add a set of logic with corresponding coexistence parameters to handle the situation under BT inquiry/page. We will set PSTDMA while WL-Busy + BT inquiry/page to separate WL/BT slots. PSTDMA can protect WL data rate and BT performance. If WL-Busy + BT inquiry/page and there was BT device paired, We will set the mechanism to 4Slot PSTDMA. In 4Slot PSTDMA, the paired devices can perform more smoothly and prevent some issues trigger from insufficient data. And to avoid A2DP glitch or disconnection, we will adjust ACL data priority higher than inquiry/page. In addition, we found sometimes BT inquiry/page still working last for seconds after BT had notified inquiry/page finished. It will lead to A2DP glitch cause of ACL data, inquiry/page priority toggled. To fix the corner, we add a timer to remain the inquiry/page status. And we found WL busy/idle threshold is too sensitive, it will keep switching in some weak network environment and coexistence mechanism will switch between TDMA and PSTDMA. The very frequently switching may destroyed not only the handshake with AP, but BT performance. And it will trigger some unexpected error. To prevent the frequently switching, we add a timer to delay the status change while WL busy switch to idle. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200715023324.8600-1-yhchuang@realtek.com
2020-07-15mwifiex: Prevent memory corruption handling keysDan Carpenter1-7/+15
The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda
2020-07-15mwifiex: Fix reporting 'operation not supported' error codePali Rohár3-12/+12
ENOTSUPP (double PP) is internal linux kernel code 524 available only in kernel include file linux/errno.h and not exported to userspace. EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not supported' available via kernel include file uapi/asm-generic/errno.h. ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace include file bits/errno.h and not available in kernel. Because Linux kernel does not support ENOTSUP (single P) and because userspace does not support ENOTSUPP (double PP), report error code for 'operation not supported' via EOPNOTSUPP macro. This patch fixes problem that mwifiex kernel driver sends to userspace unsupported error codes like: "failed: -524 (No error information)". After applying this patch userspace see: "failed: -95 (Not supported)". Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200703112151.18917-1-pali@kernel.org
2020-07-15wlcore: Remove pointless spinlockTony Lindgren1-2/+0
No need to take a spinlock here for bitops. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200702162951.45392-5-tony@atomide.com
2020-07-15wlcore: Use spin_trylock in wlcore_irq() to see if we need to queue txTony Lindgren1-6/+11
We currently have a collection of flags and locking between the threaded irq and tx work: - wl->flags bitops - wl->mutex - wl->wl_lock spinlock The bitops flags do not need a spinlock around them, and we only need the spinlock to see if we need to queue tx work or not. And wlcore_irq() holds the mutex. To simplify the locking, we can use spin_trylock and always queue tx work unless we know there's nothing to do. Let's also update the comment a bit while at it. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200702162951.45392-4-tony@atomide.com
2020-07-15wlcore: Use spin_trylock in wlcore_irq_locked() for running the queueTony Lindgren1-9/+13
We currently have a collection of flags and locking between the threaded irq and tx work: - wl->flags bitops - wl->mutex - wl->wl_lock spinlock The bitops flags do not need a spinlock around them, and wlcore_irq() already holds the mutex calling wlcore_irq_locked(). And we only need the spinlock to see if we need to run the queue or not. To simplify the locking, we can use spin_trylock and always run the tx queue unless we know there's nothing to do. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200702162951.45392-3-tony@atomide.com
2020-07-15wlcore: Simplify runtime resume ELP pathTony Lindgren1-28/+15
We can simplify the runtime resume ELP path by always setting and clearing the completion in runtime resume. This way we can test for WL1271_FLAG_IRQ_RUNNING after the resume write to see if we need completion at all. And in wlcore_irq(), we need to take spinlock for running the completion and for the pm_wakeup_event(). Spinlock is not needed around the bitops flags check for WL1271_FLAG_SUSPENDED so the spinlocked sections get shorter. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200702162951.45392-2-tony@atomide.com
2020-07-15mwifiex: Use macro MWIFIEX_MAX_BSS_NUM for specifying limit of interfacesPali Rohár1-1/+2
This macro is already used in mwifiex driver for specifying upper limit and is defined to value 3. So use it also in struct ieee80211_iface_limit. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200626152938.12737-1-pali@kernel.org
2020-07-15rtw88: 8822c: add new RFE type 6Yan-Hsuan Chuang1-0/+1
A new RFE type 6 of RTL8822CE is released, add it in the RFE type definition. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623072014.31631-1-yhchuang@realtek.com
2020-07-15rtw88: 8822ce: add support for device ID 0xc82fAaron Ma1-0/+4
New device ID 0xc82f found on Lenovo ThinkCenter. Tested it with c822 driver, works good. PCI id: 03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:c82f] Subsystem: Lenovo Device [17aa:c02f] Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200612082745.204400-1-aaron.ma@canonical.com
2020-07-15rtw88: pci: disable aspm for platform inter-op with module parameterYan-Hsuan Chuang1-0/+9
Some platforms cannot read the DBI register successfully for the ASPM settings. After the read failed, the bus could be unstable, and the device just became unavailable [1]. For those platforms, the ASPM should be disabled. But as the ASPM can help the driver to save the power consumption in power save mode, the ASPM is still needed. So, add a module parameter for them to disable it, then the device can still work, while others can benefit from the less power consumption that brings by ASPM enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411 [2] Note that my lenovo T430 is the same. Fixes: 3dff7c6e3749 ("rtw88: allows to enable/disable HCI link PS mechanism") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605074703.32726-1-yhchuang@realtek.com
2020-07-15rtw88: 8821c: Add 8821CE to Kconfig and MakefileTzu-En Huang2-0/+20
Since 8821C code is ready, we can build it. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603094218.19942-6-yhchuang@realtek.com
2020-07-15rtw88: single rf path chips don't support TX STBCTzu-En Huang1-2/+2
Since single rf path chips don't support TX SPBC, tell mac80211 to not advertise it. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603094218.19942-5-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add beamformee supportTzu-En Huang2-2/+48
Beamforming is used for directional signal transmission/reception. Beamformee plays the role for signal reception, and makes the RX performance better in middle distance range. Implement beamformee related callbacks for 8821c. Since 8821c only support 1ss rate, nc_index in beamformee setting needs to be adjusted based on the capability. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603094218.19942-4-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add power trackingTzu-En Huang3-0/+293
The TX power requires to be adjusted based on the thermal value. The actual power will decrease if the thermal value raised, and will increase if the thermal value lowered. Driver comapres the thermal value, as moving averages. If it changes over a limit, driver will modify the TX power index to compensate. Implement rtw_chip_ops::pwr_track() for 8821c. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603094218.19942-3-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add cck pd settingsTzu-En Huang3-0/+29
CCK PD can reduce the number of false alarm of the CCK rates. It dynamically adjusts the power threshold and CS ratio. The values are compared to the values of the previous level, if the level is changed, set new values of power threshold and CS ratio. Implement rtw_chip_ops::cck_pd_set() for 8821c. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603094218.19942-2-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add phy calibrationTzu-En Huang1-0/+34
In order to get a better TX EVM, do calibration after association. The calibration needed for 8821c is the IQK, which is done in the firmware. Implement the rtw_chip_ops::phy_calibration() to trigger firmware to calibrate. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-8-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add false alarm statisticsTzu-En Huang2-0/+63
False alarm statistics can be used to adjust the RX gain. This helps the driver to adapt to different circumstances. Implement rtw_chip_ops::false_alarm_statistics() for 8821c. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-7-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add query rx desc supportTzu-En Huang2-0/+117
Some RX packets contain also information about environment status. Implement rtw_chip_ops::query_rx_desc() for 8821c. Parse the RX descriptor which describes the current condition of the received packet. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-6-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add set channel supportTzu-En Huang4-0/+229
8821c is capable of 2.4G and 5G. Implement rtw_chip_ops::set_channel() to set 2G and 5G channels. This includes MAC, BB and RF related settings. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-5-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add dig related settingsTzu-En Huang1-0/+6
To improve user experience in field, we need DIG to adjust RX initial gain depends on field situation. Define the register addresses for 8821c. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-4-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add set tx power indexTzu-En Huang1-0/+39
To configure the transmit power of 8821c implement trasmit power index setting callback function for 8821c. This is very similar to the callback function of 8822b. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-3-yhchuang@realtek.com
2020-07-15rtw88: 8821c: add basic functionsTzu-En Huang8-0/+7514
RTL8821CE chipsets are 802.11ac dual-band WiFi + BT combo chips. This patch adds the basic functions such as parameter tables, chip information, power on flow. Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616091625.26489-2-yhchuang@realtek.com
2020-07-14wilc1000: let wilc_mac_xmit() return NETDEV_TX_OKLuc Van Oostenryck1-3/+3
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type defining 'NETDEV_TX_OK' but this driver returns '0' instead of 'NETDEV_TX_OK'. Fix this by returning 'NETDEV_TX_OK' instead of '0'. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629104009.84077-1-luc.vanoostenryck@gmail.com
2020-07-14wilc1000: use API version number info along with firmware filenameAjay Singh2-5/+14
Added version number info along with firmware name so driver can pick the correct revision of FW file. Moved FW filename macro as part of driver code & added MODULE_FIRMWARE to specify FW needed by module. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-6-ajay.kathat@microchip.com
2020-07-14wilc1000: use unified single wilc1000 FW binaryAjay Singh2-13/+8
Modify WILC1000 binary filename to use single unified wilc1000 FW. A single wilc1000 binary is used for different wilc1000 revisions. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-5-ajay.kathat@microchip.com
2020-07-14wilc1000: fix compiler warning for 'wowlan_support' unused variableAjay Singh1-0/+2
Avoid below reported warning found when 'CONFIG_PM' config is undefined. 'warning: unused variable 'wowlan_support' [-Wunused-const-variable]' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-4-ajay.kathat@microchip.com
2020-07-14wilc1000: use strlcpy to avoid 'stringop-truncation' warningAjay Singh1-2/+1
Make use 'strlcpy' instead of 'strncpy' to overcome 'stringop-truncation' compiler warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-3-ajay.kathat@microchip.com
2020-07-14brcm80211: brcmsmac: Move LEDs to GPIO descriptorsLinus Walleij2-39/+29
The code in the BRCM80211 BRCMSMAC driver is using the legacy GPIO API to to a complex check of the validity of the base of the GPIO chip and whether it is present at all and then adding an offset to the base of the chip. Use the existing function to obtain a GPIO line internally from a GPIO chip so we can use the offset directly and modernize the code to use GPIO descriptors instead of integers from the global GPIO numberspace. Cc: Wright Feng <wright.feng@cypress.com> Cc: Frank Kao <frank.kao@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711210150.4943-1-linus.walleij@linaro.org
2020-07-14brcmfmac: Transform compatible string for FW loadingMatthias Brugger1-3/+16
The driver relies on the compatible string from DT to determine which FW configuration file it should load. The DTS spec allows for '/' as part of the compatible string. We change this to '-' so that we will still be able to load the config file, even when the compatible has a '/'. This fixes explicitly the firmware loading for "solidrun,cubox-i/q". Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans deGoede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200701112201.6449-1-matthias.bgg@kernel.org
2020-07-14brcmfmac: set pacing shift before transmitting skb to busWright Feng1-0/+3
Linux 3.6 introduces TSQ which has a per socket threshold for TCP Tx packet to reduce latency. In flow control mode, host driver enqueues skb in hanger and TCP doesn't push new skb frees until host frees the skb when receiving fwstatus event. So set pacing shift 8 to send them as a single large aggregate frame to the bus layer. 43455 TX TCP throughput in different FC modes on Linux 5.4.18 sk_pacing_shift : Throughput (fcmode=0) 10: 245 Mbps 9: 245 Mbps 8: 246 Mbps 7: 246 Mbps sk_pacing_shift : Throughput (fcmode=1) 10: 182 Mbps 9: 197 Mbps 8: 206 Mbps 7: 207 Mbps sk_pacing_shift : Throughput (fcmode=2) 10: 180 Mbps 9: 197 Mbps 8: 206 Mbps 7: 207 Mbps Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624091608.25154-3-wright.feng@cypress.com
2020-07-14brcmfmac: set state of hanger slot to FREE when flushing PSQWright Feng1-0/+4
When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624091608.25154-2-wright.feng@cypress.com
2020-07-14brcmfmac: reset SDIO bus on a firmware crashChi-Hsien Lin3-3/+38
commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") adds a reset function to recover firmware trap for PCIe bus. This commit adds an implementation for SDIO bus. Upon SDIO firmware trap, do below: - Remove the device - Reset hardware - Probe the device again Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622144851.165248-1-chi-hsien.lin@cypress.com
2020-07-14brcmfmac: do not disconnect for disassoc frame from unconnected APAble Liao1-1/+6
Ignore FW event if the event's BSSID is different form the BSSID of the currently connected AP. Check interface state is connected or not, if state is not connected that can ignore link down event. Signed-off-by: Able Liao <Able.Liao@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200618160739.21457-4-chi-hsien.lin@cypress.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.