aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21PCI: Fix typo in pci_scan_child_bus_extend()Mika Westerberg1-1/+1
Should be 'if' not 'of'. Fix this. Link: https://lore.kernel.org/r/20220905080232.36087-7-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Fix whitespace and indentationMika Westerberg1-2/+0
Drop two empty lines from pci_scan_child_bus_extend() and correct indentation in pci_bridge_distribute_available_resources() to better follow the kernel coding style. No functional impact. Link: https://lore.kernel.org/r/20220905080232.36087-6-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Pass available buses even if the bridge is already configuredMika Westerberg1-2/+3
If some part of the PCI topology is already configured (by the boot firmware) but not all, and it includes hotplug bridges, we may need to extend the bus resources of those bridges to accommodate any future hotplugs, in the same way we already do with the normal hotplug case. Pass the available buses to pci_scan_child_bus_extend() even when the bridge in question is already configured so the bus allocation code can use these available buses to extend the possible hotplug bridges below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Link: https://lore.kernel.org/r/20220905080232.36087-3-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-20PCI: Fix used_buses calculation in pci_scan_child_bus_extend()Mika Westerberg1-2/+2
pci_scan_bridge_extend() returns the subordinate bus number needed to cover all the buses below a bridge. pci_scan_child_bus_extend() computes the number of buses to reserve by comparing that with the current max bus number. Previously it did the subtraction in the wrong order, so 'used_buses' was nonsense. Subtract 'max' from 'cmax' as is done for the similar pci_scan_bridge_extend() call in the following block. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Fixes: 3374c545c27c ("PCI: Account for all bridges on bus when distributing bus numbers") Link: https://lore.kernel.org/r/20220905080232.36087-2-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-08-10Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-1/+1
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.0: - Introduce a 'struct cxl_region' object with support for provisioning and assembling persistent memory regions. - Introduce alloc_free_mem_region() to accompany the existing request_free_mem_region() as a method to allocate physical memory capacity out of an existing resource. - Export insert_resource_expand_to_fit() for the CXL subsystem to late-publish CXL platform windows in iomem_resource. - Add a polled mode PCI DOE (Data Object Exchange) driver service and use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute Table)" * tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits) cxl/hdm: Fix skip allocations vs multiple pmem allocations cxl/region: Disallow region granularity != window granularity cxl/region: Fix x1 interleave to greater than x1 interleave routing cxl/region: Move HPA setup to cxl_region_attach() cxl/region: Fix decoder interleave programming Documentation: cxl: remove dangling kernel-doc reference cxl/region: describe targets and nr_targets members of cxl_region_params cxl/regions: add padding for cxl_rr_ep_add nested lists cxl/region: Fix IS_ERR() vs NULL check cxl/region: Fix region reference target accounting cxl/region: Fix region commit uninitialized variable warning cxl/region: Fix port setup uninitialized variable warnings cxl/region: Stop initializing interleave granularity cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime cxl/acpi: Minimize granularity for x1 interleaves cxl/region: Delete 'region' attribute from root decoders cxl/acpi: Autoload driver for 'cxl_acpi' test devices cxl/region: decrement ->nr_targets on error in cxl_region_attach() cxl/region: prevent underflow in ways_to_cxl() cxl/region: uninitialized variable in alloc_hpa() ...
2022-08-04Merge branch 'pci/err'Bjorn Helgaas1-0/+3
- Recognize disconnected devices so we don't bother trying to set them to "frozen" or "normal" state (Christoph Hellwig) - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - Configure ECRC for every device, including hot-added ones (Stefan Roese) - Keep AER error reporting enabled for switches (Stefan Roese) - Enable error reporting for all devices that support AER (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) * pci/err: PCI/AER: Iterate over error counters instead of error strings PCI/AER: Enable error reporting when AER is native PCI/portdrv: Don't disable AER reporting in get_port_device_capability() PCI/AER: Configure ECRC for every device PCI: Clear PCI_STATUS when setting up device PCI/ERR: Recognize disconnected devices in report_error_detected()
2022-07-22PCI: Extend isolated function probing to s390Niklas Schnelle1-1/+1
Like the jailhouse hypervisor, s390's PCI architecture allows passing isolated PCI functions to a guest OS instance. As of now this is was not utilized even with multi-function support as the s390 PCI code makes sure that only virtual PCI busses including a function with devfn 0 are presented to the PCI subsystem. A subsequent change will remove this restriction. Allow probing such functions by replacing the existing check for jailhouse_paravirt() with a new hypervisor_isolated_pci_functions() helper. Link: https://lore.kernel.org/r/20220628143100.3228092-5-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-22PCI: Move jailhouse's isolated function handling to pci_scan_slot()Niklas Schnelle1-20/+10
The special case of the jailhouse hypervisor passing through individual PCI functions handles scanning for PCI functions even if function 0 does not exist. Previously this was done with an extra loop duplicating the one in pci_scan_slot(). By incorporating the check for jailhouse_paravirt() into pci_scan_slot() we can instead do this as part of the normal slot scan. Note that with the assignment of dev->multifunction gated by fn > 0 we set dev->multifunction unconditionally for all functions if function 0 is missing just as in the existing jailhouse loop. The only functional change is that we now call pcie_aspm_init_link_state() for these functions, but this already happened if function 0 was passed through and should not be a problem. Link: https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20220628143100.3228092-4-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-22PCI: Split out next_ari_fn() from next_fn()Niklas Schnelle1-13/+18
In commit b1bd58e448f2 ("PCI: Consolidate "next-function" functions") the next_fn() function subsumed the traditional and ARI-based next function determination. This got rid of some needlessly complex function pointer handling but also reduced the separation between these very different methods of finding the next function. With the next_fn() cleaned up a bit we can re-introduce this separation by moving out the ARI handling while sticking with direct function calls. Link: https://lore.kernel.org/r/20220628143100.3228092-3-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
2022-07-22PCI: Clean up pci_scan_slot()Niklas Schnelle1-19/+19
While determining the next PCI function is factored out of pci_scan_slot() into next_fn(), the former still handles the first function as a special case, which duplicates the code from the scan loop. Furthermore the non-ARI branch of next_fn() is generally hard to understand and especially the check for multifunction devices is hidden in the handling of NULL devices for non-contiguous multifunction. It also signals that no further functions need to be scanned by returning 0 via wraparound and this is a valid function number. Improve upon this by transforming the conditions in next_fn() to be easier to understand. By changing next_fn() to return -ENODEV instead of 0 when there is no next function we can then handle the initial function inside the loop and deduplicate the shared handling. This also makes it more explicit that only function 0 must exist. No functional change is intended. Link: https://lore.kernel.org/r/20220628143100.3228092-2-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-19PCI: Replace magic constant for PCI Sig Vendor IDIra Weiny1-1/+1
Replace the magic value in pci_bus_crs_vendor_id() with PCI_VENDOR_ID_PCI_SIG. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-3-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-05PCI: Clear PCI_STATUS when setting up deviceKai-Heng Feng1-0/+3
We are seeing Master Abort bit is set on Intel I350 ethernet device and its root port right after boot, probably happened during BIOS phase: 00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:464d] (rev 05) (prog-if 00 [Normal decode]) Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- 6e:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- The Master Abort bit is cleared after S3. Since there's no functional impact found, clear the PCI_STATUS to treat it anew at setting up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215989 Link: https://lore.kernel.org/r/20220517043738.2308499-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-16Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-20/+12
Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas1-5/+5
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13Merge branch 'pci/host/mt7621'Bjorn Helgaas1-2/+2
- Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) * pci/host/mt7621: PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static
2022-01-12PCI: Let pcibios_root_bridge_prepare() access bridge->windowsSergio Paracuellos1-2/+2
When pci_register_host_bridge() is called, bridge->windows are already available. However these windows are being moved temporarily from there. To let pcibios_root_bridge_prepare() have access to these windows, move the windows movement after calling this function. This is useful for the MIPS ralink mt7621 platform so it can set up I/O coherence units and avoid custom MIPS code in the mt7621 PCIe controller driver. Link: https://lore.kernel.org/r/20211207104924.21327-2-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2021-12-09PCI/MSI: Move msi_lock to struct pci_devThomas Gleixner1-1/+3
It's only required for PCI/MSI. So no point in having it in every struct device. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211206210224.925241961@linutronix.de
2021-11-18PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config readsNaveen Naidu1-5/+5
When config pci_ops.read() can detect failed PCI transactions, the data returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff). Obviously a successful PCI config read may *also* return that data if a config register happens to contain ~0, so it doesn't definitively indicate an error unless we know the register cannot contain ~0. Use PCI_POSSIBLE_ERROR() to check the response we get when we read data from hardware. This unifies PCI error response checking and makes error checks consistent and easier to find. Link: https://lore.kernel.org/r/f4d18d470cb90f9cb52ea155b01528ba2e76e8d6.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-15PCI: Use pci_find_vsec_capability() when looking for TBT devicesAndy Shevchenko1-13/+5
Currently set_pcie_thunderbolt() open-codes pci_find_vsec_capability(). Refactor the former to use the latter. No functional change intended. Link: https://lore.kernel.org/r/20211115112902.24033-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-3/+4
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05Merge branch 'pci/resource'Bjorn Helgaas1-4/+27
- Coalesce host bridge contiguous apertures to allow P2P bridge windows that span several contiguous host bridge apertures (Kai-Heng Feng) * pci/resource: PCI: Coalesce host bridge contiguous apertures
2021-11-05Merge branch 'pci/enumeration'Bjorn Helgaas1-2/+2
- Rename pcibios_add_device() to pcibios_device_add() since it's called from pci_device_add() (Oliver O'Halloran) - Don't try to enable AtomicOps on VFs, since they can only be enabled on the PF (Selvin Xavier) * pci/enumeration: PCI: Do not enable AtomicOps on VFs PCI: Rename pcibios_add_device() to pcibios_device_add()
2021-10-27PCI: Prefer 'unsigned int' over bare 'unsigned'Krzysztof Wilczyński1-3/+4
The bare "unsigned" type implicitly means "unsigned int", but the preferred coding style is to use the complete type name. Update the bare use of "unsigned" to the preferred "unsigned int". No change to functionality intended. See a1ce18e4f941 ("checkpatch: warn on bare unsigned or signed declarations without int"). Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-19PCI: Re-enable Downstream Port LTR after reset or hotplugMingchuang Qiao1-3/+15
Per PCIe r5.0, sec 7.5.3.16, Downstream Ports must disable LTR if the link goes down (the Port goes DL_Down status). This is a problem because the Downstream Port's dev->ltr_path is still set, so we think LTR is still enabled, and we enable LTR in the Endpoint. When it sends LTR messages, they cause Unsupported Request errors at the Downstream Port. This happens in the reset path, where we may enable LTR in pci_restore_pcie_state() even though the Downstream Port disabled LTR because the reset caused a link down event. It also happens in the hot-remove and hot-add path, where we may enable LTR in pci_configure_ltr() even though the Downstream Port disabled LTR when the hot-remove took the link down. In these two scenarios, check the upstream bridge and restore its LTR enable if appropriate. The Unsupported Request may be logged by AER as follows: pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: id=00e8 pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=00e8(Requester ID) pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00100000/00010000 pcieport 0000:00:1d.0: [20] Unsupported Request (First) In addition, if LTR is not configured correctly, the link cannot enter the L1.2 state, which prevents some machines from entering the S0ix low power state. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20211012075614.54576-1-mingchuang.qiao@mediatek.com Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Signed-off-by: Mingchuang Qiao <mingchuang.qiao@mediatek.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-09-29PCI: Coalesce host bridge contiguous aperturesKai-Heng Feng1-4/+27
Built-in graphics at 07:00.0 on HP EliteDesk 805 G6 doesn't work because graphics can't get the BAR it needs. The BIOS configuration is correct: BARs 0 and 2 both fit in the 00:08.1 bridge window. But that 00:08.1 window covers two host bridge apertures from _CRS. Previously we assumed this was illegal, so we clipped the window to fit into one aperture (see 0f7e7aee2f37 ("PCI: Add pci_bus_clip_resource() to clip to fit upstream window")). pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window] pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100401fffff 64bit pref] pci 0000:07:00.0: reg 0x10: [mem 0x10030000000-0x1003fffffff 64bit pref] pci 0000:07:00.0: reg 0x18: [mem 0x10040000000-0x100401fffff 64bit pref] pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window However, the host bridge apertures are contiguous, so there's no need to clip in this case. Coalesce contiguous apertures so we can allocate from the entire contiguous region. Previous commit 65db04053efe ("PCI: Coalesce host bridge contiguous apertures") was similar but sorted the apertures, and Guenter Roeck reported a regression in ppc:sam460ex qemu emulation from nvme; see https://lore.kernel.org/all/20210709231529.GA3270116@roeck-us.net/ [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013 Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210713125007.1260304-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Guenter Roeck <linux@roeck-us.net>
2021-09-21PCI: Rename pcibios_add_device() to pcibios_device_add()Oliver O'Halloran1-2/+2
The general convention for pcibios_* hooks is that they're named after the corresponding pci_* function they provide a hook for. The exception is pcibios_add_device() which provides a hook for pci_device_add(). Rename pcibios_add_device() to pcibios_device_add() so it matches pci_device_add(). Also, remove the export of the microblaze version. The only caller must be compiled as a built-in so there's no reason for the export. Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
2021-09-02Merge branch 'remotes/lorenzo/pci/hyper-v'Bjorn Helgaas1-2/+10
- Add domain_nr in struct pci_host_bridge (Boqun Feng) - Use host bridge MSI domain for root buses if present (Boqun Feng) - Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V) (Boqun Feng) - Make Hyper-V enumeration more generic (Arnd Bergmann) - Set Hyper-V domain_nr at probe-time (Boqun Feng) - Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng) - Enable Hyper-V bridge probing on ARM64 (Boqun Feng) * remotes/lorenzo/pci/hyper-v: PCI: hv: Turn on the host bridge probing on ARM64 PCI: hv: Set up MSI domain at bridge probing time PCI: hv: Set ->domain_nr of pci_host_bridge at probing time PCI: hv: Generify PCI probing arm64: PCI: Support root bridge preparation for Hyper-V arm64: PCI: Restructure pcibios_root_bridge_prepare() PCI: Support populating MSI domains of root buses via bridges PCI: Introduce domain_nr in pci_host_bridge
2021-09-02Merge branch 'pci/vpd'Bjorn Helgaas1-1/+0
- Check Resource Item Names against those defined for type (Bjorn Helgaas) - Treat initial 0xff as missing EEPROM (Heiner Kallweit) - Reject resource tags with invalid size (Bjorn Helgaas) - Don't check Large Resource Item Names for validity (Bjorn Helgaas) - Allow access to valid parts of VPD if some is invalid (Bjorn Helgaas) - Remove pci_vpd_size() old_size argument (Heiner Kallweit) - Make pci_vpd_wait() uninterruptible (Heiner Kallweit) - Remove struct pci_vpd.flag (Heiner Kallweit) - Remove struct pci_vpd_ops (Heiner Kallweit) - Remove struct pci_vpd.valid member (Heiner Kallweit) - Embed struct pci_vpd in struct pci_dev (Heiner Kallweit) - Determine VPD size in pci_vpd_init() (Heiner Kallweit) - Treat invalid VPD like missing VPD capability (Heiner Kallweit) - Add pci_vpd_alloc() to allocate buffer and read VPD into it (Heiner Kallweit) - Add pci_vpd_find_ro_info_keyword() (Heiner Kallweit) - Add pci_vpd_check_csum() (Heiner Kallweit) - Add pci_vpd_find_id_string() (Heiner Kallweit) - Read VPD with pci_vpd_alloc() (bnx2x, bnxt, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit) - Search VPD with pci_vpd_find_ro_info_keyword() (bnx2, bnx2x, bnxt, cxgb4, cxlflash SCSI, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit) - Search VPD with pci_vpd_find_id_string() (cxgb4 driver) (Heiner Kallweit) - Validate VPD checksum with pci_vpd_check_csum() (cxgb4, tg3 drivers) (Heiner Kallweit) - Replace open-coded byte swapping with swab32s() in bnx2 (Heiner Kallweit) - Remove unused vpd_param member ec (Heiner Kallweit) - Stop exporting pci_vpd_find_tag(), pci_vpd_find_info_keyword() (Heiner Kallweit) - Move several VPD defines and inlines to internal PCI core (Heiner Kallweit) * pci/vpd: PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword() cxgb4: Search VPD with pci_vpd_find_ro_info_keyword() cxgb4: Remove unused vpd_param member ec cxgb4: Validate VPD checksum with pci_vpd_check_csum() bnxt: Search VPD with pci_vpd_find_ro_info_keyword() bnxt: Read VPD with pci_vpd_alloc() bnx2x: Search VPD with pci_vpd_find_ro_info_keyword() bnx2x: Read VPD with pci_vpd_alloc() bnx2: Replace open-coded byte swapping with swab32s() bnx2: Search VPD with pci_vpd_find_ro_info_keyword() sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword() sfc: falcon: Read VPD with pci_vpd_alloc() tg3: Search VPD with pci_vpd_find_ro_info_keyword() tg3: Validate VPD checksum with pci_vpd_check_csum() tg3: Read VPD with pci_vpd_alloc() sfc: Search VPD with pci_vpd_find_ro_info_keyword() sfc: Read VPD with pci_vpd_alloc() PCI/VPD: Add pci_vpd_check_csum() PCI/VPD: Add pci_vpd_find_ro_info_keyword() PCI/VPD: Add pci_vpd_alloc() PCI/VPD: Treat invalid VPD like missing VPD capability PCI/VPD: Determine VPD size in pci_vpd_init() PCI/VPD: Embed struct pci_vpd in struct pci_dev PCI/VPD: Remove struct pci_vpd.valid member PCI/VPD: Remove struct pci_vpd_ops PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd() PCI/VPD: Remove struct pci_vpd.flag PCI/VPD: Make pci_vpd_wait() uninterruptible PCI/VPD: Remove pci_vpd_size() old_size argument PCI/VPD: Allow access to valid parts of VPD if some is invalid PCI/VPD: Don't check Large Resource Item Names for validity PCI/VPD: Reject resource tags with invalid size PCI/VPD: Treat initial 0xff as missing EEPROM PCI/VPD: Check Resource Item Names against those valid for type PCI/VPD: Correct diagnostic for VPD read failure
2021-08-23PCI: Support populating MSI domains of root buses via bridgesBoqun Feng1-1/+5
Currently, at probing time, the MSI domains of root buses are populated if either the information of MSI domain is available from firmware (DT or ACPI), or arch-specific sysdata is used to pass the fwnode of the MSI domain. These two conditions don't cover all, e.g. Hyper-V virtual PCI on ARM64, which doesn't have the MSI information in the firmware and couldn't use arch-specific sysdata because running on an architecture with PCI_DOMAINS_GENERIC=y. To support populating MSI domains of the root buses at the probing when neither of the above condition is true, the ->msi_domain of the corresponding bridge device is used: in pci_host_bridge_msi_domain(), which should return the MSI domain of the root bus, the ->msi_domain of the corresponding bridge is fetched first as a potential value of the MSI domain of the root bus. In order to use the approach to populate MSI domains, the driver needs to dev_set_msi_domain() on the bridge before calling pci_register_host_bridge(), and makes sure GENERIC_MSI_IRQ_DOMAIN=y. Another advantage of this new approach is providing an arch-independent way to populate MSI domains, which allows sharing the driver code as much as possible between architectures. Originally-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210726180657.142727-3-boqun.feng@gmail.com Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-23PCI: Introduce domain_nr in pci_host_bridgeBoqun Feng1-1/+5
Currently we retrieve the PCI domain number of the host bridge from the bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually we have the information at PCI host bridge probing time, and it makes sense that we store it into pci_host_bridge. One benefit of doing so is the requirement for supporting PCI on Hyper-V for ARM64, because the host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain number from pci_config_window on ARM64 Hyper-V guest. As the preparation for ARM64 Hyper-V PCI support, we introduce the domain_nr in pci_host_bridge and a sentinel value to allow drivers to set domain numbers properly at probing time. Currently CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this newly-introduced field. Link: https://lore.kernel.org/r/20210726180657.142727-2-boqun.feng@gmail.com Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-18PCI: Setup ACPI fwnode early and at the same time with OFShanker Donthineni1-3/+4
Previously, the ACPI_COMPANION() of a pci_dev was usually set by acpi_bind_one() in this path: pci_device_add pci_configure_device pci_init_capabilities device_add device_platform_notify acpi_platform_notify acpi_device_notify # KOBJ_ADD acpi_bind_one ACPI_COMPANION_SET However, things like pci_configure_device() and pci_init_capabilities() that run before device_add() need the ACPI_COMPANION, e.g., acpi_pci_bridge_d3() uses a _DSD method to learn about D3 support. These places had special-case code to manually look up the ACPI_COMPANION. Set the ACPI_COMPANION earlier, in pci_setup_device(), so it will be available while configuring the device. This covers both paths to creating pci_dev objects: pci_scan_single_device # for normal non-SR-IOV devices pci_scan_device pci_setup_device pci_set_acpi_fwnode pci_device_add pci_iov_add_virtfn # for SR-IOV virtual functions pci_setup_device pci_set_acpi_fwnode Also move the OF fwnode setup to the same spot. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210817180500.1253-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-17PCI: Remove reset_fn field from pci_devAmey Narkhede1-1/+0
"reset_fn" indicates whether the device supports any reset mechanism. Remove the use of reset_fn in favor of the reset_methods array that tracks supported reset mechanisms of a device and their ordering. The octeon driver incorrectly used reset_fn to detect whether the device supports FLR or not. Use pcie_reset_flr() to probe whether it supports FLR. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-5-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Add array to track reset method orderingAmey Narkhede1-3/+2
Add reset_methods[] in struct pci_dev to keep track of reset mechanisms supported by the device and their ordering. Refactor probing and reset functions to take advantage of calling convention of reset functions. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-4-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Cache PCIe Device Capabilities registerAmey Narkhede1-2/+3
Add a new member called devcap in struct pci_dev for caching the PCIe Device Capabilities register to avoid reading PCI_EXP_DEVCAP multiple times. Refactor pcie_has_flr() to use cached device capabilities. Link: https://lore.kernel.org/r/20210817180500.1253-2-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-12PCI/VPD: Embed struct pci_vpd in struct pci_devHeiner Kallweit1-1/+0
Now that struct pci_vpd is really small, simplify the code by embedding struct pci_vpd directly in struct pci_dev instead of dynamically allocating it. Link: https://lore.kernel.org/r/d898489e-22ba-71f1-2f31-f1a78dc15849@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-09Revert "PCI: Coalesce host bridge contiguous apertures"Bjorn Helgaas1-46/+4
This reverts commit 65db04053efea3f3e412a7e0cc599962999c96b4. Guenter reported that after 65db04053efe, the ppc:sam460ex qemu emulation no longer boots from nvme: nvme nvme0: Device not ready; aborting initialisation, CSTS=0x0 nvme nvme0: Removing after probe failure status: -19 Link: https://lore.kernel.org/r/20210709231529.GA3270116@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-08Merge tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-4/+47
Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-07-06Merge branch 'pci/resource'Bjorn Helgaas1-4/+46
- Coalesce host bridge apertures so we can allocate large BARs that cross contiguous apertures (Kai-Heng Feng) * pci/resource: PCI: Coalesce host bridge contiguous apertures
2021-06-14Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman1-1/+2
We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04PCI: Coalesce host bridge contiguous aperturesKai-Heng Feng1-4/+46
Built-in graphics on HP EliteDesk 805 G6 doesn't work because graphics can't get the BAR it needs: pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window] pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window] pci 0000:00:08.1: bridge window [mem 0xd2000000-0xd23fffff] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100401fffff 64bit pref] pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window However, the root bus has two contiguous apertures that can contain the child resource requested. Coalesce contiguous apertures so we can allocate from the entire contiguous region. [bhelgaas: fold in https://lore.kernel.org/r/20210528170242.1564038-1-kai.heng.feng@canonical.com] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013 Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210401131252.531935-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-27PCI: Print a debug message on PCI device releaseNiklas Schnelle1-0/+1
Commit 62795041418d ("PCI: enhance physical slot debug information") added a debug print on releasing the PCI slot and another message on destroying it. There is however no debug print on releasing the PCI device structure itself and even with closely looking at the kernel log during hotplug testing, I overlooked several missing pci_dev_put() calls for way too long. Add a debug print in pci_release_dev() making it much easier to spot when the PCI device structure is not released when it is supposed to be. Link: https://lore.kernel.org/r/20210311132312.2882425-1-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-27PCI: Add sysfs "removable" attributeRajat Jain1-0/+22
A PCI device is "external_facing" if it's a Root Port with the ACPI "ExternalFacingPort" property or if it has the DT "external-facing" property. We consider everything downstream from such a device to be removable by user. We're mainly concerned with consumer platforms with user accessible Thunderbolt ports that are vulnerable to DMA attacks, and we expect those ports to be identified by firmware as "ExternalFacingPort". Devices in traditional hotplug slots can technically be removed, but the expectation is that unless the port is marked with "ExternalFacingPort", such devices are less accessible to user / may not be removed by end user, and thus not exposed as "removable" to userspace. This can be used to implement userspace policies tailored for user removable devices. Eg usage: https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2591812 https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2795038 (code uses such an attribute to remove external PCI devices or disable features on them as needed by the policy desired) Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20210524171812.18095-2-rajatja@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-25PCI/MSI: Fix MSIs for generic hosts that use device-tree's "msi-map"Jean-Philippe Brucker1-1/+2
Since commit 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains"), platforms that rely on the "msi-map" device-tree property don't get MSIs anymore. On the Arm Fast Model for example [1], the host bridge doesn't have a "msi-parent" property since it doesn't itself generate MSIs, and so doesn't get a MSI domain. It has an "msi-map" property instead to describe MSI controllers of child devices. As a result, due to the new msi_domain check in pci_register_host_bridge(), the whole bus gets PCI_BUS_FLAGS_NO_MSI. Check whether the root complex has an "msi-map" property before giving up on MSIs. [1] arch/arm64/boot/dts/arm/fvp-base-revc.dts Fixes: 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains") Link: https://lore.kernel.org/r/20210510173129.750496-1-jean-philippe@linaro.org Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-05-04Merge branch 'remotes/lorenzo/pci/msi'Bjorn Helgaas1-2/+2
- Convert tegra to MSI domains (Marc Zyngier) - Use rcar controller address as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert rcar to MSI domains (Marc Zyngier) - Use xilinx port structure as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert xilinx to MSI domains (Marc Zyngier) - Remove unused Hyper-V msi_controller structure (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) * remotes/lorenzo/pci/msi: PCI: Refactor HT advertising of NO_MSI flag PCI/MSI: Document the various ways of ending up with NO_MSI PCI: mediatek: Advertise lack of built-in MSI handling PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains PCI/MSI: Let PCI host bridges declare their reliance on MSI domains PCI/MSI: Kill default_teardown_msi_irqs() PCI/MSI: Kill msi_controller structure PCI/MSI: Drop use of msi_controller from core code PCI: hv: Drop msi_controller structure PCI: xilinx: Convert to MSI domains PCI: xilinx: Don't allocate extra memory for the MSI capture address PCI: rcar: Convert to MSI domains PCI: rcar: Don't allocate extra memory for the MSI capture address PCI: tegra: Convert to MSI domains
2021-04-20PCI/MSI: Let PCI host bridges declare their reliance on MSI domainsMarc Zyngier1-0/+2
There is a whole class of host bridges that cannot know whether MSIs will be provided or not, as they rely on other blocks to provide the MSI functionnality, using MSI domains. This is the case for example on systems that use the ARM GIC architecture. Introduce a new attribute ('msi_domain') indicating that implicit dependency, and use this property to set the NO_MSI flag when no MSI domain is found at probe time. Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Drop use of msi_controller from core codeMarc Zyngier1-2/+0
As there is no driver using msi_controller, we can now safely remove its use from the PCI probe code. Link: https://lore.kernel.org/r/20210330151145.997953-8-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-23PCI: Release OF node in pci_scan_device()'s error pathDmitry Baryshkov1-0/+1
In pci_scan_device(), if pci_setup_device() fails for any reason, the code will not release device's of_node by calling pci_release_of_node(). Fix that by calling the release function. Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically") Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2020-12-15Merge branch 'pci/msi'Bjorn Helgaas1-19/+2
- Disable MSI for broken Pericom PCIe-USB adapter (Andy Shevchenko) - Move MSI/MSI-X init to msi.c (Bjorn Helgaas) - Move MSI/MSI-X flags updaters to msi.c (Bjorn Helgaas) - Warn if we assign 64-bit MSI address to device that only supports 32-bit MSI (Vidya Sagar) * pci/msi: PCI/MSI: Set device flag indicating only 32-bit MSI support PCI/MSI: Move MSI/MSI-X flags updaters to msi.c PCI/MSI: Move MSI/MSI-X init to msi.c PCI: Use predefined Pericom Vendor ID PCI: Disable MSI for Pericom PCIe-USB adapter
2020-12-15Merge branch 'pci/misc'Bjorn Helgaas1-2/+2
- Update kernel-doc to match function prototypes (Mauro Carvalho Chehab) - Bounds-check "pci=resource_alignment=" requests (Bjorn Helgaas) - Fix integer overflow in "pci=resource_alignment=" requests (Colin Ian King) - Remove unused HAVE_PCI_SET_MWI definition (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) * pci/misc: PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: Fix overflow in command-line resource alignment requests PCI: Bounds-check command-line resource alignment requests PCI: Fix kernel-doc markup # Conflicts: # drivers/pci/pci-driver.c
2020-12-15Merge branch 'pci/err'Bjorn Helgaas1-0/+2
- Stop writing AER Capability when we don't own it (Sean V Kelley) - Bind RCEC devices to the Port driver (Qiuxu Zhuo) - Cache the RCEC RA Capability offset (Sean V Kelley) - Add pci_walk_bridge() (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley) - Recover from RCiEP AER errors (Sean V Kelley) - Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) * pci/err: PCI/AER: Add RCEC AER error injection support PCI/PME: Add pcie_walk_rcec() to RCEC PME handling PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/ERR: Recover from RCiEP AER errors PCI/ERR: Add pcie_link_rcec() to associate RCiEPs PCI/ERR: Recover from RCEC AER errors PCI/ERR: Clear AER status only when we control AER PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities() PCI/ERR: Bind RCEC devices to the Root Port driver PCI/AER: Write AER Capability only when we control it
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.