aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-15PCI/switchtec: Add Gen4 flash information interface supportKelvin Cao1-0/+111
Add the new flash_info registers struct and the implementation of ioctl_flash_part_info() for the new Gen4 hardware. [logang@deltatee.com: rewrote commit message] Link: https://lore.kernel.org/r/20200115035648.2578-7-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add Gen4 system info register supportLogan Gunthorpe1-0/+5
Add the Gen4-specific system info registers and ensure their usage is guarded by a check on the device's generation. Link: https://lore.kernel.org/r/20200115035648.2578-6-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Separate Gen3 register structures into unionsLogan Gunthorpe1-11/+27
Since the sys_info and flash_info registers differ significantly in Gen4 hardware, separate out the Gen3 registers into their own structure with a union in the main structure. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-5-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Factor out Gen3 ioctl_flash_part_info()Logan Gunthorpe1-26/+42
Refactor ioctl_flash_part_info() into a Gen3-specific function because the registers for flash partition information have changed significantly in Gen4 and will require a completely different implementation. No functional changes intended. Co-developed-by: Kelvin Cao <kelvin.cao@microchip.com> Link: https://lore.kernel.org/r/20200115035648.2578-4-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add 'generation' variableLogan Gunthorpe1-32/+58
Add a generation variable passed through the device ID table and test for Gen3-specific registers. This will allow us to add Gen4 and other devices that extend the programming model. Link: https://lore.kernel.org/r/20200115035648.2578-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Rename generation-specific constantsLogan Gunthorpe1-5/+5
Gen4 hardware will have different values for the SWITCHTEC_X_RUNNING and SWITCHTEC_IOCTL_NUM_PARTITIONS, so rename them with GEN3 in their name. No functional changes intended. Link: https://lore.kernel.org/r/20200115035648.2578-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr()Wesley Sheng1-5/+6
The event ID check doesn't depend on anything in the mask_all_events() to mask_event() path. Do it in switchtec_event_isr() to avoid the CSR read in mask_event(). Link: https://lore.kernel.org/r/20200106190337.2428-6-logang@deltatee.com Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Remove redundant valid PFF number countWesley Sheng1-8/+4
Remove the redundant valid PFF number count from ioctl_event_summary(), since init_pff() has already counted the valid PFFs. Link: https://lore.kernel.org/r/20200106190337.2428-5-logang@deltatee.com Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add support for Intercomm Notify and Upstream Error ContainmentLogan Gunthorpe1-0/+3
Add support for the Inter Fabric Manager Communication (Intercomm) Notify event in PAX variants of Switchtec hardware and the Upstream Error Containment port in the MR1 release of Gen3 firmware. Link: https://lore.kernel.org/r/20200106190337.2428-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-13PCI/PM: Print config space of devices before suspendChen Yu1-1/+4
When resuming from hibernation (S4, also known as "suspend to disk") on a VM, we have seen invalid config space, e.g., serial 0000:00:16.3: restoring config space at offset 0x14 (was 0x9104e000, writing 0xffffffff) To help debug problems like this, log the config space being saved before suspend, similar to the log in pci_restore_config_dword() when resuming. Link: https://lore.kernel.org/r/20200113060724.19571-1-yu.c.chen@intel.com [bhelgaas: commit log] Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Len Brown <lenb@kernel.org>
2020-01-13PCI: Don't disable bridge BARs when assigning bus resourcesLogan Gunthorpe1-4/+16
Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5ad71 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by: Kit Chow <kchow@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-13PCI: uniphier: remove module code from built-in driverMasahiro Yamada1-30/+1
builtin_platform_driver() and MODULE_* are always odd combination. This file is not compiled as a module by anyone because CONFIG_PCIE_UNIPHIER is a bool option. Let's remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-01-13PCI: exynos: Rename Exynos to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-01-10PCI: tegra: Fix afi_pex2_ctrl reg offset for Tegra30Marcel Ziswiler1-1/+1
Fix AFI_PEX2_CTRL reg offset for Tegra30 by moving it from the Tegra20 SoC struct where it erroneously got added. This fixes the AFI_PEX2_CTRL reg offset being uninitialised subsequently failing to bring up the third PCIe port. Fixes: adb2653b3d2e ("PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of SoC struct") Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-01-10PCI: tegra: Fix return value check of pm_runtime_get_sync()David Engraf1-1/+1
pm_runtime_get_sync() returns the device's usage counter. This might be >0 if the device is already powered up or CONFIG_PM is disabled. Abort probe function on real error only. Fixes: da76ba50963b ("PCI: tegra: Add power management support") Link: https://lore.kernel.org/r/20191216111825.28136-1-david.engraf@sysgo.com Signed-off-by: David Engraf <david.engraf@sysgo.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org # v4.17+
2020-01-10PCI: keystone: Fix outbound region mappingYurii Monakov1-1/+1
The Keystone outbound Address Translation Unit (ATU) maps PCI MMIO space in 8 MB windows. When programming the ATU windows, we previously incremented the starting address by 8, not 8 MB, so all the windows were mapped to the first 8 MB. Therefore, only 8 MB of MMIO space was accessible. Update the loop so it increments the starting address by 8 MB, not 8, so more MMIO space is accessible. Fixes: e75043ad9792 ("PCI: keystone: Cleanup outbound window configuration") Link: https://lore.kernel.org/r/20191004154811.GA31397@monakov-y.office.kontur-niirs.ru Signed-off-by: Yurii Monakov <monakov.y@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org # v4.20+
2020-01-10PCI: keystone: Fix link training retries initiationYurii Monakov1-1/+1
ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so link training was not triggered more than once after startup. In configurations where link can be unstable during early boot, for example, under low temperature, it will never be established. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Signed-off-by: Yurii Monakov <monakov.y@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org
2020-01-10PCI: qcom: Add support for SDM845 PCIe controllerBjorn Andersson1-0/+150
The SDM845 has one Gen2 and one Gen3 controller, add support for these. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2020-01-09PCI: artpec6: Configure FTS with dwc helper functionDilip Kota1-7/+1
Use DesignWare helper functions to configure Fast Training Sequence. Drop the respective code in the driver. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-01-09PCI: dwc: intel: PCIe RC controller driverDilip Kota5-0/+625
Add support to PCIe RC controller on Intel Gateway SoCs. PCIe controller is based of Synopsys DesignWare PCIe core. Intel PCIe driver requires Upconfigure support, Fast Training Sequence and link speed configurations. So adding the respective helper functions in the PCIe DesignWare framework. It also programs hardware autonomous speed during speed configuration so defining it in pci_regs.h. Also, mark Intel PCIe driver depends on MSI IRQ Domain as Synopsys DesignWare framework depends on the PCI_MSI_IRQ_DOMAIN. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2020-01-08PCI/switchtec: Fix vep_vector_number ioread widthLogan Gunthorpe1-1/+1
vep_vector_number is actually a 16 bit register which should be read with ioread16() instead of ioread32(). Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver") Link: https://lore.kernel.org/r/20200106190337.2428-3-logang@deltatee.com Reported-by: Doug Meyer <dmeyer@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-08PCI/switchtec: Use dma_set_mask_and_coherent()Wesley Sheng1-1/+1
Use dma_set_mask_and_coherent() instead of dma_set_coherent_mask() as the Switchtec hardware fully supports 64bit addressing and we should set both the streaming and coherent masks the same. [logang@deltatee.com: reworked commit message] Fixes: aff614c6339c ("switchtec: Set DMA coherent mask") Link: https://lore.kernel.org/r/20200106190337.2428-2-logang@deltatee.com Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig5-6/+6
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-23PCI: Export pci_ats_disabled() as a GPL symbol to modulesWill Deacon1-0/+1
Building drivers for ATS-aware IOMMUs as modules requires access to pci_ats_disabled(). Export it as a GPL symbol to get things working. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-23PCI/ATS: Restore EXPORT_SYMBOL_GPL() for pci_{enable,disable}_ats()Greg Kroah-Hartman1-0/+2
Commit d355bb209783 ("PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()") unexported a bunch of symbols from the PCI core since the only external users were non-modular IOMMU drivers. Although most of those symbols can remain private for now, 'pci_{enable,disable_ats()' is required for the ARM SMMUv3 driver to build as a module, otherwise we get a build failure as follows: | ERROR: "pci_enable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined! | ERROR: "pci_disable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined! Re-export these two functions so that the ARM SMMUv3 driver can be build as a module. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> [will: rewrote commit message] Signed-off-by: Will Deacon <will@kernel.org> Tested-by: John Garry <john.garry@huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18PCI: Add DMA alias quirk for PLX PEX NTBJames Sewart1-0/+15
The PLX PEX NTB forwards DMA transactions using Requester IDs that don't exist as PCI devices. The devfn for a transaction is used as an index into a lookup table storing the origin of a transaction on the other side of the bridge. Alias all possible devfns to the NTB device so that any transaction coming in is governed by the mappings for the NTB. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-12-18PCI: Add nr_devfns parameter to pci_add_dma_alias()James Sewart2-19/+26
Add a "nr_devfns" parameter to pci_add_dma_alias() so it can be used to create DMA aliases for a range of devfns. [bhelgaas: incorporate nr_devfns fix from James, update quirk_pex_vca_alias() and setup_aliases()] Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-12-18PCI: Fix pci_add_dma_alias() bitmask sizeJames Sewart3-3/+6
The number of possible devfns is 256, but pci_add_dma_alias() allocated a bitmap of size 255. Fix this off-by-one error. This fixes commits 338c3149a221 ("PCI: Add support for multiple DMA aliases") and c6635792737b ("PCI: Allocate dma_alias_mask with bitmap_zalloc()"), but I doubt it was possible to see a problem because it takes 4 64-bit longs (or 8 32-bit longs) to hold 255 bits, and bitmap_zalloc() doesn't save the 255-bit size anywhere. [bhelgaas: commit log, move #define to drivers/pci/pci.h, include loop limit fix from Qian Cai: https://lore.kernel.org/r/20191218170004.5297-1-cai@lca.pw] Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-12-13PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllersDaniel Drake1-0/+16
On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the XHCI controller fails to resume from runtime suspend or s2idle, and USB becomes unusable from that point. xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3 xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002) xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout xhci_hcd 0000:03:00.4: PCI post-resume error -110! xhci_hcd 0000:03:00.4: HC died; cleaning up During suspend, a transition to D3cold is attempted, however the affected platforms do not seem to cut the power to the PCI device when in this state, so the device stays in D3hot. Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay is increased to 20ms. The transition failure does not appear to be detectable as a CRS condition. Add a PCI quirk to increase the delay on the affected hardware. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587 Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@mail.gmail.com Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-12-13PCI: Add generic quirk for increasing D3hot delayDaniel Drake1-7/+12
Separate the D3 delay increase functionality out of quirk_radeon_pm() into its own function so that it can be shared with other quirks, including the AMD Ryzen XHCI quirk that will be introduced in a followup commit. Tweak the function name and message to indicate more clearly that the delay relates to a D3hot-to-D0 transition. Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-12-12PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-inWei Liu2-26/+24
Previously quirk_paxc_bridge() was applied when the iproc driver was built-in, but not when it was compiled as a module. This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM: PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be defined. Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk is always applied, whether iproc is built-in or a module. [bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c] Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-12-12PCI: rockchip: Fix IO outbound ATU register numberEnric Balletbo i Serra1-1/+3
Since 62240a88004b ("PCI: rockchip: Drop storing driver private outbound resource data), the offset calculation is wrong to access the register number to program the IO outbound ATU. Fix this by computing the ATU IO register number based on the number of MEM registers, not the size of the IO region. This causes 'synchronous external aborts' like the following: mwifiex_pcie 0000:01:00.0: enabling device (0000 -> 0002) mwifiex_pcie: PCI memory map Virt0: 00000000a573ad00 PCI memory map Virt2: 00000000783126c4 Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: mwifiex_pcie(+) mwifiex uvcvideo cfg80211 atmel_mxt_ts videobuf2_vmalloc ... CPU: 2 PID: 269 Comm: systemd-udevd Not tainted 5.4.0+ #327 Hardware name: Google Kevin (DT) pstate: 60000005 (nZCv daif -PAN -UAO) pc : mwifiex_register_dev+0x264/0x3f8 [mwifiex_pcie] lr : mwifiex_register_dev+0x150/0x3f8 [mwifiex_pcie] sp : ffff800012073860 x29: ffff800012073860 x28: ffff8000100a2e28 x27: ffff8000118b6210 x26: ffff800008f57458 x25: ffff0000ecfda000 x24: 0000000000000001 x23: ffff0000e9905080 x22: ffff800008f5d000 x21: ffff0000eecea078 x20: ffff0000e9905080 x19: ffff0000eecea000 x18: 0000000000000001 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff x14: ffff8000118998c8 x13: ffff000000000000 x12: 0000000000000008 x11: 0101010101010101 x10: ffff7f7fffff7fff x9 : 0000000000000000 x8 : ffff0000e3c24240 x7 : 0000000000000000 x6 : ffff0000e3c24148 x5 : ffff0000e3c24148 x4 : ffff0000e7975ec8 x3 : 0000000000000001 x2 : 0000000000002b42 x1 : ffff800012c00008 x0 : ffff0000e9905080 Call trace: mwifiex_register_dev+0x264/0x3f8 [mwifiex_pcie] mwifiex_add_card+0x2f8/0x430 [mwifiex] mwifiex_pcie_probe+0x98/0x148 [mwifiex_pcie] pci_device_probe+0x110/0x1a8 ... Code: a8c67bfd d65f03c0 f942ac01 91002021 (b9400021) Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: 62240a88004b ("PCI: rockchip: Drop storing driver private outbound resource data) Link: https://lore.kernel.org/r/20191211093450.7481-1-enric.balletbo@collabora.com Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reported-by: Vicente Bergas <vicencb@gmail.com> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andrew Murray <andrew.murray@arm.com>
2019-12-10PCI/P2PDMA: Add Intel SkyLake-E to the whitelistArmen Baloyan1-0/+3
Intel SkyLake-E was successfully tested for p2pdma transactions spanning over a host bridge and PCI bridge with IOMMU on. Add it to the whitelist. Link: https://lore.kernel.org/r/1575669165-31697-1-git-send-email-abaloyan@gigaio.com Signed-off-by: Armen Baloyan <abaloyan@gigaio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-12-09PCI/IOV: Fix memory leak in pci_iov_add_virtfn()Navid Emamdoost1-5/+4
In the implementation of pci_iov_add_virtfn() the allocated virtfn is leaked if pci_setup_device() fails. The error handling is not calling pci_stop_and_remove_bus_device(). Change the goto label to failed2. Fixes: 156c55325d30 ("PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()") Link: https://lore.kernel.org/r/20191125195255.23740-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-12-03Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds76-1753/+2219
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-01Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playgroundLinus Torvalds1-1/+1
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-30Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-37/+90
Pull powerpc updates from Michael Ellerman: "Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing" * tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits) powerpc/fixmap: fix crash with HIGHMEM x86/efi: remove unused variables powerpc: Define arch_is_kernel_initmem_freed() for lockdep powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp powerpc: Avoid clang warnings around setjmp and longjmp powerpc: Don't add -mabi= flags when building with Clang powerpc: Fix Kconfig indentation powerpc/fixmap: don't clear fixmap area in paging_init() selftests/powerpc: spectre_v2 test must be built 64-bit powerpc/powernv: Disable native PCIe port management powerpc/kexec: Move kexec files into a dedicated subdir. powerpc/32: Split kexec low level code out of misc_32.S powerpc/sysdev: drop simple gpio powerpc/83xx: map IMMR with a BAT. powerpc/32s: automatically allocate BAT in setbat() powerpc/ioremap: warn on early use of ioremap() powerpc: Add support for GENERIC_EARLY_IOREMAP powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() powerpc/8xx: use the fixmapped IMMR in cpm_reset() powerpc/8xx: add __init to cpm1 init functions ...
2019-11-28Merge branch 'pci/trivial'Bjorn Helgaas8-55/+30
- Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski) * pci/trivial: PCI: Fix indentation PCI: Fix typos PCI: Remove useless comments and tidy others PCI: Remove unnecessary includes # Conflicts: # drivers/pci/probe.c
2019-11-28Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas2-4/+5
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) - Fix pcitest.c fd leak (Hewenliang) * remotes/lorenzo/pci/misc: tools: PCI: Fix fd leakage MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers PCI: mvebu: mvebu_pcie_map_registers __iomem fix PCI: mvebu: Make mvebu_pci_bridge_emul_ops static PCI: iproc-msi: Fix __iomem annotation in decode_msi_hwirq()
2019-11-28Merge branch 'remotes/lorenzo/pci/mmio-dma-ranges'Bjorn Helgaas21-601/+254
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) * remotes/lorenzo/pci/mmio-dma-ranges: PCI: Make devm_of_pci_get_host_bridge_resources() static PCI: rcar: Use inbound resources for setup PCI: iproc: Use inbound resources for setup PCI: xgene: Use inbound resources for setup PCI: v3-semi: Use inbound resources for setup PCI: ftpci100: Use inbound resources for setup PCI: of: Add inbound resource parsing to helpers PCI: versatile: Enable COMPILE_TEST PCI: versatile: Remove usage of PHYS_OFFSET PCI: versatile: Use pci_parse_request_of_pci_ranges() PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges() PCI: xilinx: Use pci_parse_request_of_pci_ranges() PCI: xgene: Use pci_parse_request_of_pci_ranges() PCI: v3-semi: Use pci_parse_request_of_pci_ranges() PCI: rockchip: Drop storing driver private outbound resource data PCI: rockchip: Use pci_parse_request_of_pci_ranges() PCI: mobiveil: Use pci_parse_request_of_pci_ranges() PCI: mediatek: Use pci_parse_request_of_pci_ranges() PCI: iproc: Use pci_parse_request_of_pci_ranges() PCI: faraday: Use pci_parse_request_of_pci_ranges() PCI: dwc: Use pci_parse_request_of_pci_ranges() PCI: altera: Use pci_parse_request_of_pci_ranges() PCI: aardvark: Use pci_parse_request_of_pci_ranges() PCI: Export pci_parse_request_of_pci_ranges() resource: Add a resource_list_first_type helper # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-11-28Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-8/+24
- Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) * remotes/lorenzo/pci/vmd: MAINTAINERS: Remove Keith from VMD maintainer PCI: vmd: Add device id for VMD device 8086:9A0B PCI: vmd: Add bus 224-255 restriction decode
2019-11-28Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas1-0/+10
- Set uniphier to host (RC) mode always (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier: Set mode register to host mode
2019-11-28Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-4/+2
- Fix Tegra CLKREQ dependency programming (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Fix CLKREQ dependency programming
2019-11-28Merge branch 'remotes/lorenzo/pci/rockchip'Bjorn Helgaas1-44/+25
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) * remotes/lorenzo/pci/rockchip: PCI: rockchip: Make some regulators non-optional
2019-11-28Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas1-23/+27
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) * remotes/lorenzo/pci/rcar: PCI: rcar: Fix missing MACCTLR register setting in initialization sequence PCI: rcar: Recalculate inbound range alignment for each controller entry PCI: rcar: Move the inbound index check PCI: rcar: Remove unnecessary header include (../pci.h)
2019-11-28Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas1-57/+62
- Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix csr_read()/write() build issue
2019-11-28Merge branch 'remotes/lorenzo/pci/meson'Bjorn Helgaas1-27/+109
- Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) * remotes/lorenzo/pci/meson: arm64: dts: khadas-vim3: add commented support for PCIe arm64: dts: meson-g12a: Add PCIe node phy: meson-g12a-usb3-pcie: Add support for PCIe mode PCI: amlogic: meson: Add support for G12A PCI: amlogic: Fix probed clock names dt-bindings: pci: amlogic, meson-pcie: Add G12A bindings PCI: amlogic: Fix reset assertion via gpio descriptor
2019-11-28Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas1-0/+1
- Add layerscape LS1028a support (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add LS1028a support dt-bindings: pci: layerscape-pci: add compatible strings "fsl, ls1028a-pcie"
2019-11-28Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas1-0/+28
- Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) * remotes/lorenzo/pci/iproc: PCI: iproc: Invalidate PAXB address mapping before programming it
2019-11-28Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-29/+179
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) * remotes/lorenzo/pci/hv: PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.