| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move Intel HID driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base of
the device.
On Windows these are read by a special HingeAngleService process which
calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is
in tablet- or laptop-mode. The firmware may use this to disable the kbd and
touchpad to avoid spurious input in tablet-mode as well as to report
SW_TABLET_MODE info to the OS.
Since Linux does not call these undocumented methods, the SW_TABLET_MODE
info reported by various pdx86 drivers is incorrect on these devices.
Before this commit the intel-hid and thinkpad_acpi code already had 2
hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid
reporting broken info.
And now we also have a bug-report about the same problem in the intel-vbtn
code. Since there are at least 3 different ACPI hardware-ids in play, add
a new dual_accel_detect() helper which checks for all 3, rather then
adding different hardware-ids to the drivers as bug-reports trickle in.
Having shared code which checks all known hardware-ids is esp. important
for the intel-hid and intel-vbtn drivers as these are generic drivers
which are used on a lot of devices.
The BOSC0200 hardware-id requires special handling, because often it is
used for a single-accelerometer setup. Only in a few cases it refers to
a dual-accel setup, in which case there will be 2 I2cSerialBus resources
in the device's resource-list, so the helper checks for this.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011
Reported-and-tested-by: Julius Lehmann <julius@devpi.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com
|
|
Alder Lake has a new ACPI ID for Intel HID event filter device.
Signed-off-by: Ping Bao <ping.a.bao@intel.com>
Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some devices send (duplicate) tablet-mode events when moved around even
though the mode has not changed; and they do this even when suspended.
Change the tablet-mode event handling when priv->wakeup_mode is set to
update the switch state in case it changed and then return immediately
(without calling pm_wakeup_hard_event()) to avoid spurious wakeups.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537
Fixes: 537b0dd4729e ("platform/x86: intel-hid: Add support for SW_TABLET_MODE")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com
|
|
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.
Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Rocket Lake has a new ACPI ID for Intel HID event filter device.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20201208020620.101455-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base
of the device. On Windows these are read by a special HingeAngleService
process which calls an ACPI DSM (Device Specific Method) on the
ACPI KIOX010A device node for the sensor in the display, to let the
firmware know if the 2-in-1 is in tablet- or laptop-mode so that it can
disable the kbd and touchpad to avoid spurious input in tablet-mode.
The linux kxcjk1013 driver calls the DSM for this once at probe time
to ensure that the builtin kbd and touchpad work. On some devices this
causes a "spurious" 0xcd event on the intel-hid ACPI dev. In this case
there is not a functional tablet-mode switch, so we should not register
the tablet-mode switch device.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201207165129.396298-1-hdegoede@redhat.com
|
|
Some convertible have unreliable VGBS return, in these cases we enable
support when receiving the first event.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20201204160234.36832-1-elia@xvalue.it
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some convertible use the intel-hid ACPI interface to report SW_TABLET_MODE,
implement this with DMI based allow-list to be sure to activate support
only on models that effectively have it.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Link: https://lore.kernel.org/r/20201204160121.36703-1-elia@xvalue.it
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
According to the ACPI spec 9.1.1 _DSM (Device Specific Method),
intel_hid_dsm_fn_mask, acquired from function index 0, is "a buffer
containing one bit for each function index". When validitaing fn_index,
it should be compared with corresponding bit.
This buffer is usually longer than a byte. Depending on whether
INTEL_HID_DSM_HEBC_V2_FN exist, it could be either
"Buffer (0x02) { 0xFF, 0x01 }" or "Buffer (0x02) { 0xFF, 0x03 }".
Probably it won't grow larger according to the description. On older
platforms, available functions could be fewer or not supported at all,
i.e., "Buffer (One) { 0x00 }".
Signed-off-by: Zhen Gong <zhengong@usc.edu>
Link: https://lore.kernel.org/r/CAJCLVRCyp0ASdWTx-PxsrDC9zFBPw0U2AtPip+_Hpj2r5gUPwA@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
HEBC method reports capabilities of 5 button array but HP Spectre X2 (2015)
does not have this control method (the same was for Wacom MobileStudio Pro).
Expand previous DMI quirk by Alex Hung to also enable 5 button array
for this system.
Signed-off-by: Nickolai Kozachenko <daemongloom@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
|
|
Tiger Lake's new unique ACPI device IDs for intel-hid driver is not
valid because of missing 'C' in the ID. Fix the ID by updating it.
After the update, the new ID should now look like
INT1051 --> INTC1051
Fixes: bdd11b654035 ("platform/x86: intel-hid: Add Tiger Lake ACPI device ID")
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move MODULE_DEVICE_TABLE() closer to the table for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Tiger Lake has a new unique ACPI device ID for the Intel HID event
filter device that needs to be added to the intel-hid driver to
support it.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 10a08fd65ec1 ("ACPI: PM: Set up EC GPE for system wakeup from
drivers that need it") assumed that the EC GPE would only need to be
set up for system wakeup if either the intel-hid or the intel-vbtn
driver was in use, but that turns out to be incorrect. In particular,
on ASUS Zenbook UX430UNR/i7-8550U, if the EC GPE is not enabled while
suspended, the system cannot be woken up by opening the lid or
pressing a key, and that machine doesn't use any of the drivers
mentioned above.
For this reason, always set up the EC GPE for system wakeup from
suspend-to-idle by setting and clearing its wake mask in the ACPI
suspend-to-idle callbacks.
Fixes: 10a08fd65ec1 ("ACPI: PM: Set up EC GPE for system wakeup from drivers that need it")
Reported-by: Kristian Klausen <kristian@klausen.dk>
Tested-by: Kristian Klausen <kristian@klausen.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that intel_button_array_enable() never disables the power
button which is the only one needed to wake up the system from
suspend-to-idle, so it can be safely called during suspend-to-idle
as well as during "regular" system suspend, and rearrange the
code in the driver's "suspend" and "resume" callbacks accordingly.
While at it, use pm_suspend_no_platform() to check if the current
suspend-resume cycle is suspend-to-idle, as that is the only
case when the device should be enabled while suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Both intel-hid and intel-vbtn set a wakeup_mode flag causing them
to behave in a special way during system suspend and while suspended
in their "prepare" PM callbacks and clear it in their "resume" PM
callbacks. That may cause the wakeup_mode flag to remain set after
a system suspend failure (if some other driver's "suspend" callback
returns an error before the "suspend" callback of either intel-hid
or intel-vbtn is invoked).
After commit 10a08fd65ec1 ("ACPI: PM: Set up EC GPE for system wakeup
from drivers that need it") that also affects the "wakeup mask" bit
of the EC GPE, which may not be cleared after a failing system
suspend.
Fix this issue by adding "complete" PM callbacks to intel-hid and
intel-vbtn to clear the wakeup_mode flag and the "wakeup mask" bit
of the EC GPE if they have not been cleared earlier.
Fixes: 10a08fd65ec1 ("ACPI: PM: Set up EC GPE for system wakeup from drivers that need it")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360). It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.
For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.
While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).
[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
are there to prevent the EC GPE from being disabled by the
acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
systems with either intel-hid or intel-vbtn this change doesn't
affect any interactions with the hardware or platform firmware.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Power button suspend for some Dell models was added in:
commit 821b85366284 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")
by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.
The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.
Report the power button release event to fix this issue.
Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9Ro
Tested-by: Tristian Celestin <tristian.celestin@outlook.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In some of the recent platforms, it is possible that stand alone methods
for HEBC() or other methods used in this driver may not exist. In this
case intel-hid driver will fail to load and power button will not be
functional.
It is also possible that some quirks in this driver added for some
platforms may have same issue in loading intel-hid driver.
There is an update to the ACPI details for the HID event filter driver.
In the updated specification a _DSM is added, which has separate function
indexes for each of the previous stand alone methods.
This change brings in support for the _DSM and allows usage of function
index for corresponding stand alone methods.
Details of Device Specific Method:
Intel HID Event Filter Driver _DSM UUID:
eeec56b3-4442-408f-a792-4edd4d758054
• Function index 0: Returns a buffer with a bit-field representing the
supported function IDs.
Function Index ASL Object
--------------------------------
1 BTNL
2 HDMM
3 HDSM
4 HDEM
5 BTNS
6 BTNE
7 HEBC
8 VGBS
9 HEBC
One significant change is to query the supported methods implemented on
the platform. So the previous HEBC() has two variants. HEBC v1 and
HEBC v2. The v2 version allowed further define which of the 5-button
are actually defined by the platform. HEBC v2 support is only available
via new DSM.
v1 Button details:
Bits [0] - Rotation Lock, Num Lock, Home, End, Page Up,
Page Down
Bits [1] - Wireless Radio Control
Bits [2] - System Power Down
Bits [3] - System Hibernate
Bits [4] - System Sleep/ System Wake
Bits [5] - Scan Next Track
Bits [6] - Scan Previous Track
Bits [7] - Stop
Bits [8] - Play/Pause
Bits [9] - Mute
Bits [10] - Volume Increment
Bits [11] - Volume Decrement
Bits [12] - Display Brightness Increment
Bits [13] - Display Brightness Decrement
Bits [14] - Lock Tablet
Bits [15] - Release Tablet
Bits [16] - Toggle Bezel
Bits [17] - 5 button array
Bits [18-31] - reserved
v2 Buttom details:
Bits [0-16] - Same as v1 version
Bits [17] - 5 button array
Bits [18] – Power Button
Bits [19] - W Home Button
Bits [20] - Volume Up Button
Bits [21] - Volume Down Button
Bits [22] – Rotation Lock Button
Bits [23-31] – reserved
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
KEY_ROTATE_LOCK_TOGGLE is introduced in 4.16 rc1 and this key event is
emitted on Wacom MobileStudio Pro 13.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Co-developed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Removed unused header files and sorted them alphabetically. No
functional changes are made.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The intel-hid device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: ef884112e55c (platform: x86: intel-hid: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
HEBC method reports capabilities of 5 button array but Wacom
MobileStudio Pro does not have this control method. A DMI quirk
was created to enable 5 button array for this system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197991
Reported-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Tested-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
On Dell Latitude 7275 the 5-button array is not exposed in the ACPI
tables, but notififies are still sent to the Intel HID device object
(device ID INT33D5) in response to power button actions. They were
ignored as the intel-hid driver was not prepared to take care of them
until recently.
Power button wakeup from suspend-to-idle was added in:
commit 635173a17b03 ("intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle")
However power button suspend doesn't work yet on this platform so it
would be good to add it also.
On the affected platform (for which priv->array is NULL), add a new
upfront check against the power button press notification (0xCE) to
notify_handler(), outside the wakeup mode this time, which allows
reporting the power button press event and triggers the suspend. Also
catch and ignore the corresponding power button release notification
(0xCF) to stop it from being reported as an "unknown event" in the logs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196115
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Acked-By: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: minor coding style and commit message format fix]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Pull x86 platform driver updates from Darren Hart:
"Several fixes from static analysis and message noise reduction.
Correct WMI core and related drivers to evaluate instance number 0x0
in accordance with the documentation. Add intel-telemetry support for
Gemini Lake. Various individual driver fixes noted below.
dell-wmi:
- Update dell_wmi_check_descriptor_buffer() to new model
intel-vbtn:
- reduce unnecessary messages for normal users
- match power button on press rather than release
intel-hid:
- reduce unnecessary messages for normal users
thinkpad_acpi:
- Fix warning about deprecated hwmon_device_register
wmi:
- Fix check for method instance number
ideapad-laptop:
- Expose conservation mode switch
intel_pmc_core:
- Make the driver PCH family agnostic
peaq-wmi:
- Evaluate wmi method with instance number 0x0
- silence a static checker warning
mxm-wmi:
- Evaluate wmi method with instance number 0x0
asus-wmi:
- Evaluate wmi method with instance number 0x0
intel_scu_ipc:
- make intel_scu_ipc_pdata_t const
intel_mid_powerbtn:
- make mid_pb_ddata const
- fix error return code in mid_pb_probe()
hp-wmi:
- Remove unused macro helper
- Correctly determine method id in WMI calls
dell-wmi:
- Fix driver interface version query
intel_telemetry:
- remove redundant macro definition
- Add GLK PSS Event Table
alienware-wmi:
- fix format string overflow warning
ibm_rtl:
- remove unnecessary static in ibm_rtl_write()
msi-wmi:
- remove unnecessary static in msi_wmi_notify()"
* tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits)
platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model
platform/x86: intel-vbtn: reduce unnecessary messages for normal users
platform/x86: intel-hid: reduce unnecessary messages for normal users
platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register
platform/x86: wmi: Fix check for method instance number
platform/x86: ideapad-laptop: Expose conservation mode switch
platform/x86: intel_pmc_core: Make the driver PCH family agnostic
platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0
platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0
platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0
platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const
platform/x86: intel_mid_powerbtn: make mid_pb_ddata const
platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe()
platform/x86: hp-wmi: Remove unused macro helper
platform/x86: hp-wmi: Correctly determine method id in WMI calls
platform/x86: intel-vbtn: match power button on press rather than release
platform/x86: dell-wmi: Fix driver interface version query
platform/x86: intel_telemetry: remove redundant macro definition
platform/x86: intel_telemetry: Add GLK PSS Event Table
platform/x86: alienware-wmi: fix format string overflow warning
...
|
|
Unsupported events is only useful for developers and does not meaningful
for users. Using dev_dbg makes more sense and reduces noise in kernel
messages.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
On Dell Latitude 7275 the 5-button array is not exposed in the
ACPI tables, but still notifies are sent to the Intel HID device
object (device ID INT33D5) in response to power button actions while
suspended to idle. However, they are currently ignored as the
intel-hid driver is not prepared to take care of them.
As a result, power button wakeup from suspend-to-idle doesn't work
on this platform, but suspend-to-idle is the only reliable suspend
variant on it (the S3 implementation in the platform firmware turns
out to be broken), so it would be good to handle it properly.
For this reason, add an upfront check against the power button press
event (0xCE) to notify_handler() in the wakeup mode which allows it
to catch the power button wakeup notification on the affected
platform (even though priv->array is NULL on it) and should not
change the behavior on platforms with priv->array present (because
priv->array contains the event in question in those cases).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196115
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-By: Mario Limonciello <mario.limonciello@dell.com>
|
|
Allow the intel-hid driver to wake up the system from suspend-to-idle
by configuring its platform device as a wakeup one by default and
switching it over to a system wakeup events triggering mode during
system suspend transitions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The intel-hid driver is missing a PM ->thaw callback allowing the
device to go back to the operational state after creating a
hibernation image or when there is an image restoration error during
resume.
The lack of the ->thaw callback basically means that all events
signaled by the device are discarded after a hibernation image has
been created which may be problematic, for example, if the image
cannot be saved (eg. due to an I/O issue with storage).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
devm_input_allocate_device() already causes the supplied struct device
to be set as the parent of the input device, so doing it again is
redundant.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>
|
|
Remove redundant set_bit() call for KEY_RFKILL as it is already made by
sparse_keymap_setup() due to KEY_RFKILL being assigned to event code 8
in intel_hid_keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>
|
|
intel_hid_input_setup() is only called from the platform driver's .probe
callback. Use the devm variant of input_allocate_device() for
allocating memory for the HID events input device in order to simplify
two error paths and get rid of intel_hid_input_destroy().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>
|
|
As the integer value passed to intel_hid_set_enable() is always
explicitly passed and is used solely as a boolean value, make it a bool.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>
|
|
ACPI method HDSM takes a single integer argument. Use
acpi_execute_simple_method() instead of acpi_evaluate_object() for
calling that ACPI method to simplify code and reduce the number of local
variables inside intel_hid_set_enable().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>
|
|
New firmwares include a feature called 5 button array that supports
super key, volume up/down, rotation lock and power button. Support
for this feature is required to fix power button on some recent
systems.
This patch was tested on a Dell Latitude 7480.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Pull x86 platform driver updates from Darrent Hart:
"Introduce one new driver for Mellanox platforms. Add support for
various new models to existing drivers via quirks, hotkeys, etc.
Significant updates to intel_pmc_core in support of Kabylake and
Sunrise Point PCH power management debug. Some cleanup and refactoring
across various drivers.
Detailed summary:
dell-laptop:
- Use brightness_set_blocking for kbd_led_level_set
thinkpad_acpi:
- Initialize local in_tablet_mode and type
- Fix old style declaration GCC warning
- Adding new hotkey ID for Lenovo thinkpad
- Add support for X1 Yoga (2016) Tablet Mode
- Move tablet detection into separate function
asus-nb-wmi:
- Add X45U quirk
- Make use of dmi->ident
asus-wmi:
- Set specified XUSB2PR value for X550LB
intel_mid_thermal:
- Fix suspend handlers unused warning
intel-vbtn:
- Switch to use devm_input_allocate_device
dell-wmi:
- Add events created by Dell Rugged 2-in-1s
- Adjust wifi catcher to emit KEY_WLAN
intel_pmc_core:
- Add KBL CPUID support
- Add LTR IGNORE debug feature
- Add MPHY PLL clock gating status
- ModPhy core lanes pg status
- Add PCH IP Power Gating Status
- Fix PWRMBASE mask and mmio reg len
acer-wmi:
- Only supports AMW0_GUID1 on acer family
mlx-platform:
- Introduce support for Mellanox hotplug driver
platform/x86:
- Use ACPI_FAILURE at appropriate places"
* tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (22 commits)
platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type
platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set
platform/x86: thinkpad_acpi: Fix old style declaration GCC warning
platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad
platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode
platform/x86: thinkpad_acpi: Move tablet detection into separate function
platform/x86: asus-nb-wmi.c: Add X45U quirk
platform/x86: asus-nb-wmi: Make use of dmi->ident
platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
platform/x86: intel-vbtn: Switch to use devm_input_allocate_device
platform/x86: Use ACPI_FAILURE at appropriate places
platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s
platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN
platform/x86: intel_pmc_core: Add KBL CPUID support
platform/x86: intel_pmc_core: Add LTR IGNORE debug feature
platform/x86: intel_pmc_core: Add MPHY PLL clock gating status
platform/x86: intel_pmc_core: ModPhy core lanes pg status
platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
...
|
|
Use ACPI_FAILURE() to replace !ACPI_SUCCESS(), this avoid !! operations.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.
To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.
Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The second call to acpi_remove_notify_handler does not result in panic
or generate error messages, but it is unnecessary and the function
returns with an error. Remove the duplicate call. Correct two improperly
indented lines.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This is the same as the original workaround from S3 but for S4. Without
this workaround, a rfkill event will be received and it will toggle
wireless devices when radio hotkey is not pressed.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Pull x86 platform driver updates from Darren Hart:
"Significant refactoring of Dell laptop drivers, modularizing the
smbios code. Multiple new platforms added for ideapad, asus, dell,
and alienware using existing quirks. A few fixes and cleanups.
hp-wmi:
- Remove GPS rfkill support via pre-2009 interface
- fix unregister order in hp_wmi_rfkill_setup() once again
ideapad-laptop:
- Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop:
- Support radio toggle button
intel-hid:
- allocate correct amount of memory for private struct
platform/x86:
- Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc:
- Avoid pending IPC1 command during legacy suspend
- Fix GCR register base address and length
asus-nb-wmi:
- add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv:
- Change verbosity control bits
dell-rbtn:
- Add a comment about the XPS 13 9350
dell-wmi, dell-laptop:
- depends DMI
dell-wmi:
- support Dell Inspiron M5110
- properly process Dell Instant Launch hotkey
- enable receiving WMI events on Dell Vostro V131
- Support new hotkeys on the XPS 13 9350 (Skylake)
- Clean up hotkey table size check
- Stop storing pointers to DMI tables
dell-laptop:
- move dell_smi_error() to dell-smbios
- use dell_smbios_find_token() instead of find_token_location()
- use dell_smbios_find_token() instead of find_token_id()
- extract SMBIOS-related code to a separate module
dell-smbios:
- rename dell_smi_error() to dell_smbios_error()
- make da_tokens static
- remove find_token_{id,location}()
- implement new function for finding DMI table 0xDA tokens
- make the SMBIOS buffer static
- return the SMBIOS buffer from dell_smbios_get_buffer()
- don't return an SMBIOS buffer from dell_smbios_send_request()
- don't pass an SMBIOS buffer to dell_smbios_send_request()
- rename dell_send_request() to dell_smbios_send_request()
- rename release_buffer() to dell_smbios_release_buffer()
- rename clear_buffer() to dell_smbios_clear_buffer()
- rename get_buffer() to dell_smbios_get_buffer()
dell-led:
- use dell_smbios_send_request() for performing SMBIOS calls
- use dell_smbios_find_token() for finding mic DMI tokens
toshiba_acpi:
- Add a module parameter to disable hotkeys registration
- Add sysfs entries for the Cooling Method feature
- Add support for cooling method feature
Documentation/ABI:
- Update sysfs-driver-toshiba_acpi file
thinkpad_acpi:
- Remove ambiguous logging for "Unsupported brightness interface"
alienware-wmi:
- whitespace improvements
- Add support for two new systems: ASM200 and ASM201.
- Add support for deep sleep control.
- Add initial support for alienware graphics amplifier.
- Add support for new platform: X51-R3
- Clean up whitespace for ASM100 platform"
* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
hp-wmi: Remove GPS rfkill support via pre-2009 interface
hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
dell-wmi: support Dell Inspiron M5110
dell-wmi: properly process Dell Instant Launch hotkey
dell-wmi: enable receiving WMI events on Dell Vostro V131
dell-smbios: rename dell_smi_error() to dell_smbios_error()
dell-laptop: move dell_smi_error() to dell-smbios
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop: Support radio toggle button
intel-hid: allocate correct amount of memory for private struct
platform/x86: Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
intel_pmc_ipc: Fix GCR register base address and length
asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv: Change verbosity control bits
dell-rbtn: Add a comment about the XPS 13 9350
dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
dell-wmi: Clean up hotkey table size check
dell-wmi, dell-laptop: depends DMI
dell-wmi: Stop storing pointers to DMI tables
...
|
|
We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
intel_hid_keymap contains a duplicate entry for KEY_HOME and an
incorrect HID index for KEY_PAGEDOWN
Reported-by: Pavel Bludov <pbludov@gmail.com>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
|
|
This driver supports various HID events including hotkeys.
Dell XPS 13 9350 requires it for the wireless hotkey.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-and-tested-by: Andy Lutomirski <luto@kernel.org>
[dvhart: Kconfig help typo fix and INPUT_SPARSEKMAP fix from Sedat Dilek]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
Kate Hsuan
Hans de Goede
Ping Bao
Alban Bedel
Alex Hung
Elia Devito
Zhen Gong
Lu Wei
Nickolai Kozachenko
Linus Torvalds
Gayatri Kammela
Andy Shevchenko
Rafael J. Wysocki
Jérôme de Bretagne
Srinivas Pandruvada
Michał Kępień
Axel Lin
Heikki Krogerus
Wolfram Sang