| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While commit d36deae75011 ("qdio: extend API to allow polling") enhanced
the qdio layer so that drivers can poll their Input Queues, we don't
have the corresponding infrastructure for Output Queues yet.
Factor out a helper that scans a single QDIO Queue, so that qeth can
implement TX NAPI on top of it.
While doing so, remove the duplicated tracking of the next-to-scan index
(q->first_to_check vs q->first_to_kick) in this code path.
qdio_handle_aobs() needs to move slightly upwards in the code hierarchy,
so that it's still called from the polling path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since vfio_ccw_async_region_ops is not exported and has no reason to be
globally visible make it static to avoid the following sparse warning:
drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static?
Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Fixes in vfio-ccw for older and newer issues.
|
|
The IQD mcast queue doesn't support QAOB mode, so skip the
qdio_enable_async_operation() setup call for this queue. This avoids
the allocation of an unneeded QAOB pointer array, and sets up q->use_cq
properly so that drivers are prohibited from using QAOBs for mcast
traffic.
Take this opportunity to streamline the q->use_cq and aob != 0 checks.
The path to qdio_siga_output() is straight-forward, we don't need to
worry about being called with bad operands.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
There is a small window where it's possible that we could be working
on an interrupt (queued in the workqueue) and setting up a channel
program (i.e allocating memory, pinning pages, translating address).
This can lead to allocating and freeing the channel program at the
same time and can cause memory corruption.
Let's not call cp_free if we are currently processing a channel program.
The only way we know for sure that we don't have a thread setting
up a channel program is when the state is set to VFIO_CCW_STATE_CP_PENDING.
Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <62e87bf67b38dc8d5760586e7c96d400db854ebe.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
So we don't call try to call vfio_unpin_pages() incorrectly.
Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <33a89467ad6369196ae6edf820cbcb1e2d8d050c.1562854091.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We don't set cp->initialized to true so calling cp_free
will just return and not do anything.
Also fix a memory leak where we fail to free a ccwchain
on an error.
Fixes: 812271b910 ("s390/cio: Squash cp_free() and cp_unpin_free()")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <3173c4216f4555d9765eb6e4922534982bc820e4.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The comment is misleading because it tells us that
we should set orb.cmd.c64 before calling ccwchain_calc_length,
otherwise the function ccwchain_calc_length would return an
error. This is not completely accurate.
We want to allow an orb without cmd.c64, and this is fine
as long as the channel program does not use IDALs. But we do
want to reject any channel program that uses IDALs and does
not set the flag, which is what we do in ccwchain_calc_length.
After we have done the ccw processing, we need to set cmd.c64,
as we use IDALs for all translated channel programs.
Also for better code readability let's move the setting of
cmd.c64 within the non error path.
Fixes: fb9e7880af35 ("vfio: ccw: push down unsupported IDA check")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
Pull s390 updates from Vasily Gorbik:
- Improve stop_machine wait logic: replace cpu_relax_yield call in
generic stop_machine function with a weak stop_machine_yield
function. This is overridden on s390, which yields the current cpu to
the neighbouring cpu after a couple of retries, instead of blindly
giving up the cpu to the hipervisor. This significantly improves
stop_machine performance on s390 in overcommitted scenarios.
This includes common code changes which have been Acked by Peter
Zijlstra and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels
without using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest. This
includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
remove some code which most likely isn't working at all, besides that
s390 didn't even compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
hardware is missing. This way our modules behave like most other
modules and which is also what systemd's systemd-modules-load.service
expects.
- Replace defconfig with performance_defconfig, so there is one config
file less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
docs: s390: s390dbf: typos and formatting, update crash command
docs: s390: unify and update s390dbf kdocs at debug.c
docs: s390: restore important non-kdoc parts of s390dbf.rst
vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
s390/pci: correctly handle MIO opt-out
s390/pci: deal with devices that have no support for MIO instructions
s390: ap: kvm: Enable PQAP/AQIC facility for the guest
s390: ap: implement PAPQ AQIC interception in kernel
vfio: ap: register IOMMU VFIO notifier
s390: ap: kvm: add PQAP interception for AQIC
s390/unwind: cleanup unused READ_ONCE_TASK_STACK
s390/kasan: avoid false positives during stack unwind
s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
s390/qdio: (re-)initialize tiqdio list entries
s390/dasd: Fix a precision vs width bug in dasd_feature_list()
s390/cio: introduce driver_override on the css bus
vfio-ccw: make convert_ccw0_to_ccw1 static
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
...
|
|
When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1. But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns. Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.
Convert the 2KB we copied even if it's more than we need.
Fixes: 7f8e89a8f2fd ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Current code sets the dsci to 0x00000080. Which doesn't make any sense,
as the indicator area is located in the _left-most_ byte.
Worse: if the dsci is the _shared_ indicator, this potentially clears
the indication of activity for a _different_ device.
tiqdio_thinint_handler() will then have no reason to call that device's
IRQ handler, and the device ends up stalling.
Fixes: d0c9d4a89fff ("[S390] qdio: set correct bit in dsci")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When tiqdio_remove_input_queues() removes a queue from the tiq_list as
part of qdio_shutdown(), it doesn't re-initialize the queue's list entry
and the prev/next pointers go stale.
If a subsequent qdio_establish() fails while sending the ESTABLISH cmd,
it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and
tiqdio_remove_input_queues() will attempt to remove the queue entry a
second time. This dereferences the stale pointers, and bad things ensue.
Fix this by re-initializing the list entry after removing it from the
list.
For good practice also initialize the list entry when the queue is first
allocated, and remove the quirky checks that papered over this omission.
Note that prior to
commit e521813468f7 ("s390/qdio: fix access to uninitialized qdio_q fields"),
these checks were bogus anyway.
setup_queues_misc() clears the whole queue struct, and thus needs to
re-init the prev/next pointers as well.
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Sometimes, we want to control which of the matching drivers
binds to a subchannel device (e.g. for subchannels we want to
handle via vfio-ccw).
For pci devices, a mechanism to do so has been introduced in
782a985d7af2 ("PCI: Introduce new device binding path using
pci_dev.driver_override"). It makes sense to introduce the
driver_override attribute for subchannel devices as well, so
that we can easily extend the 'driverctl' tool (which makes
use of the driver_override attribute for pci).
Note that unlike pci we still require a driver override to
match the subchannel type; matching more than one subchannel
type is probably not useful anyway.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Update __ccwdev_check_busid() and __ccwgroupdev_check_busid() to use
"const" qualifiers to fix the compiler warning.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reported by sparse.
Fixes: 7f8e89a8f2fd ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190624090721.16241-1-cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Refactoring of the vfio-ccw cp handling, simplifying the
code and avoiding unneeded allocating/copying.
* tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
vfio-ccw: Skip second copy of guest cp to host
vfio-ccw: Move guest_cp storage into common struct
s390/cio: Combine direct and indirect CCW paths
vfio-ccw: Rearrange IDAL allocation in direct CCW
vfio-ccw: Remove pfn_array_table
vfio-ccw: Adjust the first IDAW outside of the nested loops
vfio-ccw: Rearrange pfn_array and pfn_array_table arrays
s390/cio: Use generalized CCW handler in cp_init()
s390/cio: Generalize the TIC handler
s390/cio: Refactor the routine that handles TIC CCWs
s390/cio: Squash cp_free() and cp_unpin_free()
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just to keep things tidy.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-6-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378ee9 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This allows device drivers (eg. qeth) to use the struct when processing
information retrieved via RCD.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Now that pfn_array_table[] is always an array of 1, it seems silly to
check for the very first entry in an array in the middle of two nested
loops, since we know it'll only ever happen once.
Let's move this outside the loops to simplify things, even though
the "k" variable is still necessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
While processing a channel program, we currently have two nested
arrays that carry a slightly different structure. The direct CCW
path creates this:
ccwchain->pfn_array_table[1]->pfn_array[#pages]
while an IDA CCW creates:
ccwchain->pfn_array_table[#idaws]->pfn_array[1]
The distinction appears to state that each pfn_array_table entry
points to an array of contiguous pages, represented by a pfn_array,
um, array. Since the direct-addressed scenario can ONLY represent
contiguous pages, it makes the intermediate array necessary but
difficult to recognize. Meanwhile, since an IDAL can contain
non-contiguous pages and there is no logic in vfio-ccw to detect
adjacent IDAWs, it is the second array that is necessary but appearing
to be superfluous.
I am not aware of any documentation that states the pfn_array[] needs
to be of contiguous pages; it is just what the code does today.
I don't see any reason for this either, let's just flip the IDA
codepath around so that it generates:
ch_pat->pfn_array_table[1]->pfn_array[#idaws]
This will bring it in line with the direct-addressed codepath,
so that we can understand the behavior of this memory regardless
of what type of CCW is being processed. And it means the casual
observer does not need to know/care whether the pfn_array[]
represents contiguous pages or not.
NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs,
so that "#pages" == "#idaws" in this area. This means that we will
have difficulty with this overlap in terminology if support for
Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that
this patch changes our ability to make that distinction.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It is now pretty apparent that ccwchain_handle_ccw()
(nee ccwchain_handle_tic()) does everything that cp_init()
wants to do.
Let's remove that duplicated code from cp_init() and let
ccwchain_handle_ccw() handle it itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Refactor ccwchain_handle_tic() into a routine that handles a channel
program address (which itself is a CCW pointer), rather than a CCW pointer
that is only a TIC CCW. This will make it easier to reuse this code for
other CCW commands.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Extract the "does the target of this TIC already exist?" check from
ccwchain_handle_tic(), so that it's easier to refactor that function
into one that cp_init() is able to use.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The routine cp_free() does nothing but call cp_unpin_free(), and while
most places call cp_free() there is one caller of cp_unpin_free() used
when the cp is guaranteed to have not been marked initialized.
This seems like a dubious way to make a distinction, so let's combine
these routines and make cp_free() do all the work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Protected virtualization guests have to use shared pages for airq
notifier bit vectors, because the hypervisor needs to write these bits.
Let us make sure we allocate DMA memory for the notifier bit vectors by
replacing the kmem_cache with a dma_cache and kalloc() with
cio_dma_zalloc().
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
As virtio-ccw devices are channel devices, we need to use the
dma area within the common I/O layer for any communication with
the hypervisor.
Note that we do not need to use that area for control blocks
directly referenced by instructions, e.g. the orb.
It handles neither QDIO in the common code, nor any device type specific
stuff (like channel programs constructed by the DASD driver).
An interesting side effect is that virtio structures are now going to
get allocated in 31 bit addressable storage.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
To support protected virtualization cio will need to make sure the
memory used for communication with the hypervisor is DMA memory.
Let us introduce one global pool for cio.
Our DMA pools are implemented as a gen_pool backed with DMA pages. The
idea is to avoid each allocation effectively wasting a page, as we
typically allocate much less than PAGE_SIZE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Free the vfio_ccw_cmd_region on module exit.
Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <c0f39039d28af39ea2939391bf005e3495d890fd.1559576250.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.
This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.
Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Add missing parameter description to fix the following warning:
drivers/s390/cio/qdio_thinint.c:183: warning:
Function parameter or member 'floating' not described in 'tiqdio_thinint_handler'
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
If the CCW being processed is a No-Operation, then by definition no
data is being transferred. Let's fold those checks into the normal
CCW processors, rather than skipping out early.
Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question. Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.
[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response. Consider this chain:
Address Format-1 CCW
-------- -----------------
0 33110EC0 346022CC 33177468
1 33110EC8 CF200000 3318300C
CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved. CCW[1] also has the SLI
bit set, and has a length of zero. Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:
Address Format-1 CCW
-------- -----------------
0 021EDED0 346422CC 021F0000
1 021EDED8 CF240000 3318300C
Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of. The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).
While the I/O fails, it doesn't fail correctly. In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.
To fix this, revert commit 4cebc5d6a6ff ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else. We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).
(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits. So we will cover the whole "family" of sense CCWs.)
For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program. The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.
Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.
The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs. Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's initialize the host address to something that is invalid,
rather than letting it default to zero. This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The pfn_array_alloc_pin routine is doing too much. Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.
Let's effectively revert a significant portion of commit 5c1cfb1c3948
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory. In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Otherwise, the guest can believe it's okay to start another I/O
and bump into the non-idle state. This results in a cc=2 (with
the asynchronous CSCH/HSCH code) returned to the guest, which is
unfortunate since everything is otherwise working normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20190514234248.36203-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).
In the case of an error, this points us to the first un-executed CCW
in the chain. But in the case of normal I/O, the address points beyond
the end of the chain. While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.
[1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When get_buf_states() gets called with count > 1, it scans the
corresponding number of SBAL states until it encounters a mismatch.
But when these SBALs are in a HW-owned state, the callers don't actually
care _how many_ such SBALs are on the queue. If we can't process the
first SBAL, we can't process any of the following SBALs either. So when
the first SBAL is HW-owned, skip the scan of the remaining SBALs and
thus save some CPU time.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
For a 1-SBAL state inspection, use the corresponding helper.
No functional change, just reducing the number of immediate callers to
get_buf_states().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
Julian Wiedmann
Vasily Gorbik
Heiko Carstens
Farhan Ali
Linus Torvalds
Eric Farman
Cornelia Huck
Suzuki K Poulose
Halil Pasic
Sebastian Ott