aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/net/qeth_core.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-28s390/qeth: drop redundant state checkingJulian Wiedmann1-3/+5
Now that qeth always uses dev_close() to shutdown the interface, we can trust the locking and remove some custom state checks. qeth_l?_stop_card() is no longer called for a card in UP state, so remove the checks there too. This basically makes the UP state obsolete, so rip out the whole thing (except for the sysfs-visible string). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't defer close_dev work during recoveryJulian Wiedmann1-1/+0
The recovery code already runs in a kthread, we don't have to defer the offlining further. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove RECOVER stateJulian Wiedmann1-1/+1
The offline code uses a specific RECOVER state to indicate that the interface should be brought up when a qeth device is set online again. Rather than having a specific card-state for this, just put it in an internal flag bit and set the state to DOWN. When working with the card's state transitions, this reduces the complexity quite a bit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: overhaul ethtool statisticsJulian Wiedmann1-38/+52
Accumulate per-TX queue statistics, and increase their size to 64 bit. Don't bother with enabling/disabling the statistics, the overhead is negligible. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: move ethtool code into its own fileJulian Wiedmann1-8/+4
Most of this is self-contained code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: reduce ethtool statisticsJulian Wiedmann1-29/+0
Counting the number of function calls and the time spent in functions is best left to proper tracing facilities. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: use a static Output Queue arrayJulian Wiedmann1-1/+1
qeth dynamically allocates an array for storing pointers to its Output Queue structures. Switch this to a static array - we are currently limited to 4 Output Queues, so shrinking the qeth_qdio_info struct by just a few bytes doesn't justify the additional complexity. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: allow cmd callbacks to return errnosJulian Wiedmann1-1/+0
Error propagation from cmd callbacks currently works in a way where qeth_send_control_data_cb() picks the raw HW code from the response, and the cmd's originator later translates this into an errno. The callback itself only returns 0 ("done") or 1 ("expect more data"). This is 1. limiting, as the only means for the callback to report an internal error is to invent pseudo HW codes (such as IPA_RC_ENOMEM), that the originator then needs to understand. For non-IPA callbacks, we even provide a separate field in the IO buffer metadata (iob->rc) so the callback can pass back a return value. 2. fragile, as the originator must take care to not translate any errno that is returned by qeth's own IO code paths (eg -ENOMEM). Also, any originator that forgets to translate the HW codes potentially passes garbage back to its caller. For instance, see commit 2aa4867198c2 ("s390/qeth: translate SETVLAN/DELVLAN errors"). Introduce a new model where all HW error translation is done within the callback, and the callback returns > 0, if it expects more data (as before) == 0, on success < 0, with an errno Start off with converting all callbacks to the new model that either a) pass back pseudo HW codes, or b) have a dependency on a specific HW error code. Also convert c) the one callback that uses iob->rc, and d) qeth_setadpparms_change_macaddr_cb() so that it can pass back an error back to qeth_l2_request_initial_mac() even when the cmd itself was successful. The old model remains supported: if the callback returns 0, we still propagate the response's HW error code back to the originator. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: cancel cmd on early errorJulian Wiedmann1-0/+1
When sending cmds via qeth_send_control_data(), qeth puts the request on the IO channel and then blocks on the reply object until the response has been received. If the IO completes with error, there will never be a response and we block until the reply-wait hits its timeout. For this case, connect the request buffer to its reply object, so that we can immediately cancel the wait. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: consolidate filling of low-level cmd length fieldsJulian Wiedmann1-1/+2
The code to fill the IPA length fields is duplicated three times across the driver: 1. qeth_send_ipa_cmd() sets IPA_CMD_LENGTH, which matches the defaults in the IPA_PDU_HEADER template. 2. for OSN, qeth_osn_send_ipa_cmd() bypasses this logic and inserts the length passed by the caller. 3. SNMP commands (that can outgrow IPA_CMD_LENGTH) have their own way of setting the length fields, via qeth_send_ipa_snmp_cmd(). Consolidate this into qeth_prepare_ipa_cmd(), which all originators of IPA cmds already call during setup of their cmd. Let qeth_send_ipa_cmd() pull the length from the cmd instead of hard-coding IPA_CMD_LENGTH. For now, the SNMP code still needs to fix-up its length fields manually. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: reduce data length for ARP cache queryJulian Wiedmann1-3/+0
qeth_l3_query_arp_cache_info() indicates a data length that's much larger than the actual length of its request (ie. the value passed to qeth_get_setassparms_cmd()). The confusion presumably comes from the fact that the cmd _response_ can be quite large - but that's no concern for the initial request IO. Fixing this up allows us to use the generic qeth_send_ipa_cmd() infrastructure. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: conclude all event processing before offlining a cardJulian Wiedmann1-1/+1
Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: cancel close_dev work before removing a cardJulian Wiedmann1-0/+1
A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25s390/qeth: remove VLAN tracking for L2 devicesJulian Wiedmann1-7/+0
For recovery purposes, qeth keeps track of all registered VIDs. Replace this by using the infrastructure introduced in commit 9daae9bd47cf ("net: Call add/kill vid ndo on vlan filter feature toggling"). By managing NETIF_F_HW_VLAN_CTAG_FILTER as a hw_feature, netdev_update_features() will select it from dev->wanted_features and replay all of the netdevice's VIDs to its ndo_vlan_rx_add_vid() callback. z/VM NICs strictly require VLAN registration, so don't expose it as hw_feature there but add a little hack in qeth_enable_hw_features() to make things work regardless. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25s390/qeth: detach netdevice while card is offlineJulian Wiedmann1-5/+0
When a qeth card is offline, it has no connection to the HW. So none of our control callbacks can run IO against it, and we can only cache the input (eg a new MAC address) without providing proper feedback to the caller. In this context, it seems much more reasonable to simply detach the netdevice and let the kernel reject any interaction with it. This also makes all sorts of internal state checks and locking obsolete. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25s390/qeth: consolidate open/stop netdev opsJulian Wiedmann1-0/+4
The L2 and L3 code for these ops is almost identical, we only need to provide a custom ndo_validate_addr() for L2 that checks whether programming the MAC address succeeded. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08s390/qeth: remove card listJulian Wiedmann1-7/+1
Re-implement the card-by-RDEV lookup by using device model concepts, and remove the now redundant list of all qeth card instances in the system. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08s390/qeth: unify transmit codeJulian Wiedmann1-8/+0
Since commit 82bf5c0867f6 ("s390/qeth: add support for IPv6 TSO"), qeth_xmit() also knows how to build TSO packets and is practically identical to qeth_l3_xmit(). Convert qeth_l3_xmit() into a thin wrapper that merely strips the L2 header off a packet, and calls qeth_xmit() for the actual TX processing. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08s390/qeth: handle af_iucv skbs in qeth_l3_fill_header()Julian Wiedmann1-1/+1
Filling the HW header from one single function will make it easier to rip out all the duplicated transmit code in qeth_l3_xmit(). On top, this saves one conditional branch in the TSO path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08s390/qeth: utilize virtual MAC for Layer2 OSD devicesJulian Wiedmann1-1/+0
By default, READ MAC on a Layer2 OSD device returns the adapter's burnt-in MAC address. Given the default scenario of many virtual devices on the same adapter, qeth can't make any use of this address and therefore skips the READ MAC call for this device type. But in some configurations, the READ MAC command for a Layer2 OSD device actually returns a pre-provisioned, virtual MAC address. So enable the READ MAC code to detect this situation, and let the L2 subdriver call READ MAC for OSD devices. This also removes the QETH_LAYER2_MAC_READ flag, which protects L2 devices against calling READ MAC multiple times. Instead protect the whole call to qeth_l2_request_initial_mac(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann1-5/+0
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann1-1/+1
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann1-0/+5
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize strings in debug messagesJulian Wiedmann1-1/+14
As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add TSO support for L2 devicesJulian Wiedmann1-1/+2
Except for the new HW header id, this works just like TSO6 on L3 devices and reuses all the existing data path support in qeth_xmit(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add support for IPv6 TSOJulian Wiedmann1-0/+2
This adds TSO6 support for L3 qeth devices. Just like for standard IPv6 traffic, TSO6 doesn't use IP offload and thus runs over the normal qeth_xmit() path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: remove duplicated carrier state trackingJulian Wiedmann1-1/+0
The netdevice is always available, apply any carrier state changes to it without caching them. On a STARTLAN event (ie. carrier-up), defer updating the state to qeth_core_hardsetup_card() in the subsequent recovery action. Also remove the carrier-state checks from the xmit routines. Stopping transmission on carrier-down is the responsibility of upper-level code (eg see dev_direct_xmit()). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: pass card pointer in iob callbackJulian Wiedmann1-1/+2
This allows us to remove the CARD_FROM_CDEV calls in the iob callbacks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: convert layer attribute to enumJulian Wiedmann1-7/+10
While the raw values are fixed due to their use in a sysfs attribute, we can still use the proper QETH_DISCIPLINE_* enum within the driver. Also move the initialization into qeth_set_initial_options(), along with all other user-configurable fields. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: fine-tune spinlocksJulian Wiedmann1-1/+0
For quite a lot of code paths it's obvious that they will never run in IRQ context. So replace their spin_lock_irqsave() calls with spin_lock_irq(). While at it, get rid of the redundant card pointer in struct qeth_reply that was used by qeth_send_control_data() to access the card's lock. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: remove qeth_hdr_chk_and_bounce()Julian Wiedmann1-1/+0
Restructure the OSN xmit path to handle misaligned HW headers properly, without shifting the packet data around. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: speed up TSO transmissionJulian Wiedmann1-1/+0
Switch TSO over to the faster transmit path, and remove all the unused old TSO code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: prepare for copy-free TSO transmissionJulian Wiedmann1-0/+1
Add all the necessary TSO plumbing to the copy-less transmit path. This includes calculating the right length of required protocol headers, and always building a separate buffer element for the TSO headers. A follow-up patch will then switch TSO traffic over to this path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: limit csum offload erratum to L3 devicesJulian Wiedmann1-5/+0
Combined L3+L4 csum offload is only required for some L3 HW. So for L2 devices, don't offload the IP header csum calculation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reference-ID: JUP 394553 Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: remove qeth_get_elements_no()Julian Wiedmann1-2/+1
Convert the last remaining user of qeth_get_elements_no() to qeth_count_elements(), so this helper can be removed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: move L2 xmit code to core moduleJulian Wiedmann1-0/+5
We need the exact same transmit path for non-offload-eligible traffic on L3 OSAs. So make it accessible from both sub-drivers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: don't restrict qeth_card to DMA memoryJulian Wiedmann1-1/+1
Allocating the main qeth_card struct with GFP_DMA blocks us from moving it into netdev_priv(). But the only reason why we need DMA memory is the ccw1 structs embedded into each ccw channel. So extract those into separate allocations, like we already do for the cmd buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: use qeth_setup_ccw() to set up all CCWsJulian Wiedmann1-0/+2
Re-work the helper a little bit, so that it can be used for all CCWs that qeth issues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: extract helper for MPC protocol typeJulian Wiedmann1-1/+1
Just a little code deduplication. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: add support for constrained HW headersJulian Wiedmann1-2/+2
Some transmit modes require that the HW header is located in the same page as the initial protocol headers in skb->data. Let callers specify the size of this contiguous header range, and enforce it when building the HW header. While at it, apply some gentle renaming to the relevant L2 code so that it matches the L3 code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: merge linearize-check into HW header constructionJulian Wiedmann1-1/+3
When checking whether an skb needs to be linearized to fit into an IO buffer, it's desirable to consider the skb's final size and layout (ie. after the HW header was added). But a subsequent linearization can then cause the re-positioned HW header to violate its alignment restrictions. Dealing with this situation in two different code paths is quite tricky. This patch integrates a) linearize-check and b) HW header construction into one 3 step-sequence: 1. evaluate how the HW header needs to be added (to identify if it takes up an additional buffer element), then 2. check if the required buffer elements exceed the device's limit. Linearize when necessary and re-evaluate the HW header placement. 3. Add the HW header in the best-possible way: a) push, without taking up an additional buffer element b) push, but consume another buffer element c) allocate a header object from the cache. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: add statistics for consumed buffer elementsJulian Wiedmann1-1/+1
Nowadays an skb fragment typically spans over multiple pages. So replace the obsolete, SG-only 'fragments' counter with one that tracks the consumed buffer elements. This is what actually matters for performance. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: use core MTU range checkingJulian Wiedmann1-1/+0
qeth's ndo_change_mtu() only applies some trivial bounds checking. Set up dev->min_mtu properly, so that dev_set_mtu() can do this for us. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: simplify max MTU handlingJulian Wiedmann1-2/+0
When the MPC initialization code discovers the HW-specific max MTU, apply the resulting changes straight to the netdevice. If this is the device's first initialization, also set its MTU (HiperSockets: the max MTU; else: a layer-specific default value). Then cap the current MTU by the new max MTU. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: don't cache HW port numberJulian Wiedmann1-1/+0
The netdevice is always available now, so get the portno from there. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: allocate netdevice earlyJulian Wiedmann1-0/+1
Allocation of the netdevice is currently delayed until a qeth card first goes online. This complicates matters in several places, where we need to cache values instead of applying them straight to the netdevice. Improve on this by moving the allocation up to where the qeth card itself is created. This is also one step in direction of eventually placing the qeth card into netdev_priv(). In all subsequent code, remove the now redundant checks whether card->dev is valid. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: clean up exported symbolsJulian Wiedmann1-6/+0
Remove some redundant EXPORTs. While at it, also move some L2-only prototypes into the proper header file. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: clean up Output Queue selectionJulian Wiedmann1-2/+13
Consolidate duplicated code, fix the misuse of RTN_UNSPEC and simplify the handling of non-unicast traffic on IQD devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: remove unused buffer->aob pointerJulian Wiedmann1-1/+0
Except for tracing, the pointer is not used. At the same time, accessing it from qeth_qdio_output_handler() is racy: whenever qeth_qdio_cq_handler() gets control, its call to qeth_qdio_handle_aob() frees the AOB. So the AOB pointer that qeth_qdio_output_handler() stores into 'buffer' can go stale at any time, and trigger a use-after-free. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.