aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ses.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-28scsi: ses: Fix unsigned comparison with less than zeroJiapeng Chong1-1/+1
Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22scsi: ses: Retry failed Send/Receive Diagnostic commandsWen Xiong1-4/+18
Setting SCSI logging level with error=3, we saw some errors from enclosues: [108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13 Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29). Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com Reviewed-by: Brian King <brking@linux.ibm.com> Reviewed-by: James Bottomley <jejb@linux.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-6/+1
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 176Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170025.980374610@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21scsi: ses: switch to SPDX tagsChristoph Hellwig1-18/+2
Use the the GPLv2 SPDX tag instead of verbose boilerplate text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-12-04scsi: ses: don't ask for diagnostic pages repeatedly during probeLi Dongyang1-4/+7
We are testing if there is a match with the ses device in a loop by calling ses_match_to_enclosure(), which will issue scsi receive diagnostics commands to the ses device for every device on the same host. On one of our boxes with 840 disks, it takes a long time to load the driver: [root@g1b-oss06 ~]# time modprobe ses real 40m48.247s user 0m0.001s sys 0m0.196s With the patch: [root@g1b-oss06 ~]# time modprobe ses real 0m17.915s user 0m0.008s sys 0m0.053s Note that we still need to refresh page 10 when we see a new disk to create the link. Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au> Tested-by: Jason Ozolins <jason.ozolins@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-07Merge branch 'fixes' into miscJames Bottomley1-1/+1
2017-08-25scsi: ses: Fix racy cleanup of /sys in remove_dev()Calvin Owens1-2/+1
Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [<ffffffffa0388a98>] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [<ffffffffa0389d14>] ses_set_fault+0xf4/0x400 [ses] [<ffffffffa0361069>] set_component_fault+0xa9/0xf0 [enclosure] [<ffffffff8205bffc>] dev_attr_store+0x3c/0x70 [<ffffffff81677df5>] sysfs_kf_write+0x115/0x180 [<ffffffff81675725>] kernfs_fop_write+0x275/0x3a0 [<ffffffff8151f810>] __vfs_write+0xe0/0x3e0 [<ffffffff8152281f>] vfs_write+0x13f/0x4a0 [<ffffffff81526731>] SyS_write+0x111/0x230 [<ffffffff828b401b>] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: ses: make page2 support optionalHannes Reinecke1-1/+38
Simple subenclosures do not need to support SES page 2, so make it optional. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: ses: Fixup error message 'failed to get diagnostic page 0xffffffea'Hannes Reinecke1-7/+10
The printk was using the result as argument, leading to a slightly confusing log message. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: ses: check return code from ses_recv_diag()Hannes Reinecke1-1/+2
We should be checking the return code from ses_recv_diag() to avoid accessing invalid data. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-08scsi: ses: Fix wrong page errorBrian King1-1/+1
If a SES device returns an error on a requested diagnostic page, we are currently printing an error indicating the wrong page was received. Fix this up to simply return a failure and only check the returned page when the diagnostic page buffer was populated by the device. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-06scsi: ses: don't get power status of SES device slot on probeMauricio Faria de Oliveira1-1/+0
The commit 08024885a2a3 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Fixes: 08024885a2a3 ("ses: Add power_status to SES device slot") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Song Liu <songliubraving@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: ses: Fix SAS device detection in enclosureEwan D. Milne1-1/+1
The call to scsi_is_sas_rphy() needs to be made on the SAS end_device, not on the SCSI device. Fixes: 835831c57e9b ("ses: use scsi_is_sas_rphy instead of is_sas_attached") Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-18scsi: ses: use scsi_is_sas_rphy instead of is_sas_attachedJohannes Thumshirn1-1/+1
Use scsi_is_sas_rphy() instead of is_sas_attached() to decide whether we should obtain the SAS address from a scsi device or not. This will prevent us from tripping on the BUG_ON() in sas_sdev_to_rdev() if the rphy isn't attached to the SAS transport class, like it is with hpsa's logical devices. Fixes: 3f8d6f2a0 ('ses: fix discovery of SATA devices in SAS enclosures') Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-12ses: Fix racy cleanup of /sys in remove_dev()Calvin Owens1-1/+2
Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [<ffffffffa0388a98>] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [<ffffffffa0389d14>] ses_set_fault+0xf4/0x400 [ses] [<ffffffffa0361069>] set_component_fault+0xa9/0xf0 [enclosure] [<ffffffff8205bffc>] dev_attr_store+0x3c/0x70 [<ffffffff81677df5>] sysfs_kf_write+0x115/0x180 [<ffffffff81675725>] kernfs_fop_write+0x275/0x3a0 [<ffffffff8151f810>] __vfs_write+0xe0/0x3e0 [<ffffffff8152281f>] vfs_write+0x13f/0x4a0 [<ffffffff81526731>] SyS_write+0x111/0x230 [<ffffffff828b401b>] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by: Calvin Owens <calvinowens@fb.com> Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-18ses: fix discovery of SATA devices in SAS enclosuresJames Bottomley1-18/+4
The current discovery routines use the VPD 0x83 inquiry page to find the device SAS address and match it to the end point in the enclosure. This doesn't work for SATA devices because expanders (or hosts) simply make up an endpoint address for STP and thus the address returned by the VPD page never matches. Instead of doing this, for SAS attached devices, match by the direct endpoint address instead. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2015-12-11ses: fix additional element traversal bugJames Bottomley1-1/+9
KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2015-12-10ses: Fix problems with simple enclosuresJames Bottomley1-1/+19
Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: stable@vger.kernel.org Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2015-01-09ses: Add power_status to SES device slotSong Liu1-9/+89
Add power_status to SES device slot, so we can power on/off the HDDs behind the enclosure. Check firmware status in ses_set_* before sending control pages to firmware. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09ses: add reliable slot attributeDan Williams1-5/+12
The name provided by firmware is in a vendor specific format, publish the slot number to have a reliable mechanism for identifying slots across firmware implementations. If the enclosure does not provide a slot number fallback to the component number which is guaranteed unique, and usually mirrors the slot number. Cleaned up the unused ses_component.desc in the process. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09ses: add enclosure logical idDan Williams1-0/+9
Export the NAA logical id for the enclosure. This is optionally available from the sas_transport_class, but it is really a property of the enclosure. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09ses: generate KOBJ_CHANGE on enclosure attachDan Williams1-1/+2
In support of a /dev/disk/by-slot populated with data from the enclosure and ses modules udev needs notification when the new interface files/links are available. Otherwise, any udev rules specified for the disk cannot assume that the enclosure topology has settled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09ses: close potential registration raceDan Williams1-7/+14
The slot and address fields have a small window of instability when userspace can read them before initialization. Separate enclosure_component allocation from registration. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: remove scsi_driver owner fieldChristoph Hellwig1-1/+1
The driver core driver structure has grown an owner field and now requires it to be set for all modular drivers. Set it up for all scsi_driver instances and get rid of the now superflous scsi_driver owner field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Shane M Seymour <shane.seymour@hp.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-03-27[SCSI] ses: Use vpd information from scsi_deviceHannes Reinecke1-28/+10
The scsi_device now has VPD page83 information attached, so there is no need to query it again. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] ses: requesting a fault indicationDouglas Gilbert1-1/+5
Noticed that when the sysfs interface of the SCSI SES driver was used to request a fault indication the LED flashed but the buzzer didn't sound. So it was doing what REQUEST IDENT (locate) should do. Changelog: - fix the setting of REQUEST FAULT for the device slot and array device slot elements in the enclosure control diagnostic page - note the potentially defective code that reads the FAULT SENSED and FAULT REQUESTED bits from the enclosure status diagnostic page The attached patch is against git/scsi-misc-2.6 Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-03-23[SCSI] ses: add subenclosure supportJames Bottomley1-19/+25
There have been many complaints that an enclosure with subenclosures isn't attached to by the ses driver. Until now, though, no-one had been willing to provide access to one. Subenclosures are added simply by flattening the tree (i.e. all subenclosure devices show up under the one main device). This may have consequences if the naming is only unique per subenclosure, but that's a bug for another day. The tested array had no page 7, so no device naming at all. It also only had the disk devices on one of its subenclosures (all the others had power, fans, temperature and various sensors), so testing of this is fairly rudimentary. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] ses: show devices for enclosures with no page 7John Hughes1-2/+2
enclosure page 7 gives us the "pretty" names of the enclosure slots. Without a page 7, we can still use the enclosure code as long as we make up numeric names for the slots. Unfortunately, the current code fails to add any devices because the check for page 10 is in the wrong place if we have no page 7. Fix it so that devices show up even if the enclosure has no page 7. Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo1-0/+1
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-12drivers/scsi/ses.c: eliminate double freeJulia Lawall1-2/+2
The few lines below the kfree of hdr_buf may go to the label err_free which will also free hdr_buf. The most straightforward solution seems to be to just move the kfree of hdr_buf after these gotos. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18[SCSI] eliminate potential kmalloc failure in scsi_get_vpd_page()James Bottomley1-3/+7
The best way to fix this is to eliminate the intenal kmalloc() and make the caller allocate the required amount of storage. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ses: update enclosure data on hot addJames Bottomley1-71/+97
Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ses: add support for enclosure component hot removalJames Bottomley1-7/+26
Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ses: fix hotplug with multiple devices and expandersJames Bottomley1-4/+6
In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-04-03[SCSI] ses: #if 0 the unused ses_match_host()Adrian Bunk1-0/+2
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ses: code_set == 1 is tested twiceRoel Kluin1-1/+1
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ses: Use new scsi VPD helperMatthew Wilcox1-27/+4
SES had its own code to retrieve VPD from devices; convert it to use the new scsi_get_vpd_page helper. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02[SCSI] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
[jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] add residual argument to scsi_execute and scsi_execute_reqFUJITA Tomonori1-4/+5
scsi_execute() and scsi_execute_req() discard the residual length information. Some callers need it. This adds residual argument (optional) to scsi_execute and scsi_execute_req. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-30[SCSI] ses: fix VPD inquiry overrunJames Bottomley1-4/+14
There are a few kerneloops.org reports like this one: http://www.kerneloops.org/search.php?search=ses_match_to_enclosure That seem to imply we're running off the end of the VPD inquiry data (although at 512 bytes, it should be long enough for just about anything). we should be using correctly sized buffers anyway, so put those in and hope this oops goes away. Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-24[SCSI] ses: Fix timeoutMatthew Wilcox1-1/+1
Timeouts are measured in jiffies, not in seconds. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones1-14/+14
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-18[SCSI] ses: fix data corruptionYinghai Lu1-59/+67
one system: initrd get courrupted: RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-28 != 2048) 134217728 crc error VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 388k freed init_special_inode: bogus i_mode (177777) Warning: unable to open an initial console. init_special_inode: bogus i_mode (177777) init_special_inode: bogus i_mode (177777) Kernel panic - not syncing: No init found. Try passing init= option to kernel. bisected to commit 9927c68864e9c39cc317b4f559309ba29e642168 Author: James Bottomley <James.Bottomley@HansenPartnership.com> Date: Sun Feb 3 15:48:56 2008 -0600 [SCSI] ses: add new Enclosure ULD changes: 1. change char to unsigned char to avoid type change later. 2. preserve len for page1 3. need to move desc_ptr even the entry is not enclosure_component_device/raid. so keep desc_ptr on right position 4. record page7 len, and double check if desc_ptr out of boundary before touch. 5. fix typo in subenclosure checking: should use hdr_buf instead. [jejb: style fixes] Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] ses: fix memory leaksYinghai Lu1-9/+14
fix leaking with scomp leaking when failing. Also free page10 on driver removal and remove one extra space. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] ses: add new Enclosure ULDJames Bottomley1-0/+689
This adds support to SCSI for enclosure services devices. It also makes use of the enclosure services added in an earlier patch to display the enclosure topology in sysfs. At the moment, the enclosures are SAS specific, but if anyone actually has a non-SAS enclosure that follows the SES-2 standard, we can add that as well. On my Vitesse based system, the enclosures show up like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/ total 0 -r--r--r-- 1 root root 4096 2008-02-03 15:44 components lrwxrwxrwx 1 root root 0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 000 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 001 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 002 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 003 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 004 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 005 lrwxrwxrwx 1 root root 0 2008-02-03 15:44 subsystem -> ../../enclosure --w------- 1 root root 4096 2008-02-03 15:44 uevent And the individual occupied slots like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/ total 0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 active lrwxrwxrwx 1 root root 0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault -rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate -rw-r--r-- 1 root root 4096 2008-02-03 15:45 status lrwxrwxrwx 1 root root 0 2008-02-03 15:45 subsystem -> ../../../enclosure_component -r--r--r-- 1 root root 4096 2008-02-03 15:45 type --w------- 1 root root 4096 2008-02-03 15:45 uevent You can flash the various blinky lights by echoing to the fault and locate files. >From the device's point of view, you can see it has an enclosure like this: sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/ block:sda generic queue_depth state bsg:0:0:0:0 iocounterbits queue_type subsystem bus iodone_cnt rescan timeout delete ioerr_cnt rev type device_blocked iorequest_cnt scsi_device:0:0:0:0 uevent driver modalias scsi_disk:0:0:0:0 vendor enclosure_component:SLOT 001 model scsi_generic:sg0 evt_media_change power scsi_level Note the enclosure_component:SLOT 001 which shows where in the enclosure this device fits. The astute will notice that I'm using SCSI VPD Inquiries to identify the devices. This, unfortunately, won't work for SATA devices unless we do some really nasty hacking about on the SAT because the only think that knows the SAS addresses for SATA devices is libsas, not libata where the SAT resides. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.