aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/smartpqi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche1-3/+3
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13scsi: smartpqi: Update version to 2.1.18-045Don Brace1-3/+3
Link: https://lore.kernel.org/r/165730608687.177165.11815510982277242966.stgit@brunhilda Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Update copyright to current yearDon Brace6-6/+6
Update copyright to current year. Link: https://lore.kernel.org/r/165730608177.177165.13184715486635363193.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add ctrl ready timeout module parameterKevin Barnett3-1/+33
Allow user to override the default driver timeout for controller ready. There are some rare configurations which require the driver to wait longer than the normal 3 minutes for the controller to complete its bootup sequence and be ready to accept commands from the driver. The module parameter is: ctrl_ready_timeout= { 0 | 30-1800 } and specifies the timeout in seconds for the driver to wait for controller ready. The valid range is 0 or 30-1800. The default value is 0, which causes the driver to use a timeout of 180 seconds (3 minutes). Link: https://lore.kernel.org/r/165730607666.177165.9221211345284471213.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Update deleting a LUN via sysfsKevin Barnett1-18/+30
Change removing a LUN using sysfs from an internal driver function pqi_remove_all_scsi_devices() to using the .slave_destroy entry in the scsi_host_template. A LUN can be deleted via sysfs using this syntax: echo 1 > /sys/block/sdX/device/delete Link: https://lore.kernel.org/r/165730607154.177165.9723066932202995774.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add module param to disable managed intsMike McGowen2-2/+13
Allow SMP affinity to be changeable by disabling managed interrupts. On distributions where the driver is enabled for multi-queue support the driver utilizes kernel managed interrupts, which automatically distributes interrupts to all available CPUs and assigns SMP affinity. On most distributions, the affinity can not be changed by the user. This change will allow managed interrupts to be disabled by the user via a module parameter while still allowing multi-queue support to function properly. Use the module parameter disable_managed_interrupts=1 Link: https://lore.kernel.org/r/165730606638.177165.12846020942931640329.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Fix RAID map race conditionKevin Barnett1-39/+71
Correct a rare stale RAID map access when performing AIO during a RAID configuration change. A race condition in the driver could cause it to access a stale RAID map when a logical volume is reconfigured. Modify the driver logic to invalidate a RAID map very early when a RAID configuration change is detected and only switch to a new RAID map after the driver detects that the RAID map has changed. Link: https://lore.kernel.org/r/165730606128.177165.7671413443814750829.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Fix DMA direction for RAID requestsMahesh Rajashekhara1-2/+2
Correct a SOP READ and WRITE DMA flags for some requests. This update corrects DMA direction issues with SCSI commands removed from the controller's internal lookup table. Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller lookup table and exposed a DMA direction flag issue. SCSI READ BLOCK LIMITS was recently removed from our controller lookup table so the controller uses the respective IU flag field to set the DMA data direction. Since the DMA direction is incorrect the FW never completes the request causing a hang. Some SCSI commands which use SCSI READ BLOCK LIMITS * sg_map * mt -f /dev/stX status After updating controller firmware, users may notice their tape units failing. This patch resolves the issue. Also, the AIO path DMA direction is correct. The DMA direction flag is a day-one bug with no reported BZ. Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver") Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Stop logging spurious PQI reset failuresKevin Barnett1-2/+1
Change method used to detect controller firmware crash during PQI reset. PQI reset can fail with error -6 if firmware takes > 100ms to complete reset. Method used by driver to detect controller firmware crash during PQI was incorrect in some cases. Link: https://lore.kernel.org/r/165730605108.177165.1132931838384767071.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add PCI IDs for Lenovo controllersMike McGowen1-0/+32
Add PCI IDs for Lenovo controllers (values in hex): VID / DID / SVID / SDID ---- ---- ---- ---- Lenovo 4350-8i HBA 9005 / 028f / 1d49 / 0220 Lenovo 4350-16i HBA 9005 / 028f / 1d49 / 0221 Lenovo 5350-8i RAID 9005 / 028f / 1d49 / 0520 Lenovo 5350-8i Internal RAID 9005 / 028f / 1d49 / 0522 Lenovo 9350-8i RAID 9005 / 028f / 1d49 / 0620 Lenovo 9350-8i Internal RAID 9005 / 028f / 1d49 / 0621 Lenovo 9350-16i RAID 9005 / 028f / 1d49 / 0622 Lenovo 9350-16i Internal RAID 9005 / 028f / 1d49 / 0623 Link: https://lore.kernel.org/r/165730604598.177165.9910276232981721083.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add PCI ID for Adaptec SmartHBA 2100-8iMike McGowen1-0/+4
Add the PCI ID for (values in hex): VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartHBA 2100-8i-o 9005 / 0285 / 9005 / 0659 Link: https://lore.kernel.org/r/165730604089.177165.17257514581321583667.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Fix PCI control linkdown system hangSagar Biradar3-5/+52
Fail all outstanding requests after a PCI linkdown. Block access to device SCSI attributes during the following conditions: "Cable pull" is called PQI_CTRL_SURPRISE_REMOVAL. "PCIe Link Down" is called PQI_CTRL_GRACEFUL_REMOVAL. Block access to device SCSI attributes during and in rare instances when the controller goes offline. Either outstanding requests or the access of SCSI attributes post linkdown can lead to a hang. Post linkdown, driver does not fail the outstanding requests leading to long wait time before all the IOs eventually fail. Also access of the SCSI attributes by host applications can lead to a system hang. Link: https://lore.kernel.org/r/165730603578.177165.4699352086827187263.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add driver support for multi-LUN devicesKumar Meiyappan2-35/+72
Add driver support for up to 256 LUNs per device. Update AIO path to pass the appropriate LUN number for base-code to target the correct LUN. Update RAID IO path to pass the appropriate LUN number for FW to target the correct LUN. Pass the correct LUN number while doing a LUN reset. Count the outstanding commands based on LUN number. While removing a Multi-LUN device, wait for all outstanding commands to complete for all LUNs. Add Feature bit support. Link: https://lore.kernel.org/r/165730603067.177165.14016422176841798336.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Close write read holesMike McGowen1-0/+3
Insert a minimum 1 millisecond delay after writing to a register before reading from it. SIS and PQI registers that can be both written to and read from can return stale data if read from too soon after having been written to. There is no read/write ordering or hazard detection on the inbound path to the MSGU from the PCIe bus, therefore reads could pass writes. Link: https://lore.kernel.org/r/165730602555.177165.11181012469428348394.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com> Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add PCI IDs for ramaxel controllersMurthy Bhat1-0/+8
Add the following controllers (values in hex): VID / DID / SVID / SDID ---- / ---- / ---- / ---- Ramaxel FBGF-RAD PM8204 9005 / 028F / 1CC4 / 0101 Ramaxel FBGF-RAD PM8222 9005 / 028F / 1CC4 / 0201 Link: https://lore.kernel.org/r/165730602045.177165.3720208650043407285.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Add controller fw version to console logGilbert Wu1-0/+3
Print controller firmware version to OS message log during driver initialization or after OFA. Link: https://lore.kernel.org/r/165730601536.177165.17698744242908911822.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-13scsi: smartpqi: Shorten drive visibility after removalMike McGowen2-2/+9
Check the response code returned from the LUN reset task management function and if it indicates the LUN is not valid, do not retry. Reduce rescan worker delay to 5 seconds for the event handler only. The removal of a drive from the OS could have been delayed up to 30 seconds after being physically pulled. The driver was retrying a LUN reset 3 times even though the return code indiciated the LUN was no longer valid. There was a 10 second delay between each retry. Additionally, the rescan worker was scheduled to run 10 seconds after the driver received the event. Link: https://lore.kernel.org/r/165730601025.177165.9416869335174437006.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-23scsi: smartpqi: Fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220521111145.81697-58-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: smartpqi: Stop using the SCSI pointerBart Van Assche1-2/+12
Set .cmd_size in the SCSI host template instead of using the SCSI pointer from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-44-bvanassche@acm.org Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: smartpqi: Fix unused variable pqi_pm_ops for clangDon Brace1-0/+4
Driver added a new dev_pm_ops structure used only if CONFIG_PM is set. The CONFIG_PM MACRO needed to be moved up in the code to avoid the compiler warnings. The hunk to move the location was missing from the above patch. Found by kernel test robot by building driver with CONFIG_PM disabled. Link: https://lore.kernel.org/all/202202090657.bstNLuce-lkp@intel.com/ Link: https://lore.kernel.org/r/20220210201151.236170-1-don.brace@microchip.com Fixes: c66e078ad89e ("scsi: smartpqi: Fix hibernate and suspend") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike Mcgowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Update version to 2.1.14-035Don Brace1-3/+3
Link: https://lore.kernel.org/r/164375215867.440833.17567317655622946368.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix lsscsi -t SAS addressesKevin Barnett1-3/+3
Correct lsscsi -t output for newer controllers that support 16-byte WWID in the SAS address field. lsscsi -t was displaying all zeros for SAS addresses. When we added support to smartpqi for 16-byte WWIDs in the RPL data for newer controllers, we were copying the wrong part of the 16-byte WWID to the SAS address field. Link: https://lore.kernel.org/r/164375215363.440833.7298523719813806902.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix hibernate and suspendKevin Barnett1-35/+81
Restructure the hibernate/suspend code to allow workarounds for the controller boot differences. Newer controllers have subtle differences in the way that they boot up. Link: https://lore.kernel.org/r/164375214859.440833.14683009064111314948.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix BUILD_BUG_ON() statementsMike McGowen3-2/+6
Add calls to the functions at the beginning driver initialization. The BUILD_BUG_ON() statements that are currently in functions named verify_structures() in the modules smartpqi_init.c and smartpqi_sis.c do not work as currently implemented. Link: https://lore.kernel.org/r/164375214355.440833.13129778749209816497.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix NUMA node not updated during initMike McGowen1-5/+5
Correct NUMA node association when calling pqi_pci_probe(). In the function pqi_pci_probe(), the driver makes an OS call to get the NUMA node associated with a controller. If the call returns that there is no associated node, the driver attempts to set it to node 0. The problem is that a different local variable (cp_node) was being used to do this, but the original local variable (node) was still being used in the call to pqi_alloc_ctrl_info(). The value of "node" is not updated if the conditional after the call to dev_to_node() evaluates to TRUE. Link: https://lore.kernel.org/r/164375213850.440833.5243014942807747074.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Expose SAS address for SATA drivesKevin Barnett2-42/+3
Remove UNIQUE_WWID_IN_REPORT_PHYS_LUN PQI feature. This feature was originally added to solve a problem with NVMe drives, but this problem has since been solved a different way, so this PQI feature is no longer required for any type of drive. The kernel was not creating symbolic links in sysfs between SATA drives and their enclosure. The driver was enabling the UNIQUE_WWID_IN_REPORT_PHYS_LUN PQI feature, which causes the FW to return a WWID for SATA drives that is derived from a unique ID read from the SATA drive itself. The driver was exposing this WWID as the drive's SAS address. However, because this SAS address does not match the SAS address returned by an enclosure's SES Page 0xA data, the Linux kernel was not able to match a SATA drive with its enclosure. Link: https://lore.kernel.org/r/164375213346.440833.12379222470149882747.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Speed up RAID 10 sequential readsMike McGowen2-5/+6
Use all data disks for sequential read operations. Testing discovered inconsistent performance on RAID 10 volumes when performing 256K sequential reads. The driver was only using a single tracker to determine which physical drive to send a request to for AIO requests. Change the single tracker (next_bypass_group) to an array of trackers based on the number of data disks in a row of the RAID map. Link: https://lore.kernel.org/r/164375212842.440833.6733971458765002128.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix kdump issue when controller is locked upMahesh Rajashekhara1-16/+23
Avoid dropping into shell if the controller is in locked up state. Driver issues SIS soft reset to bring back the controller to SIS mode while OS boots into kdump mode. If the controller is in lockup state, SIS soft reset does not work. Since the controller lockup code has not been cleared, driver considers the firmware is no longer up and running. Driver returns back an error code to OS and the kdump fails. Link: https://lore.kernel.org/r/164375212337.440833.11955356190354940369.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Update volume size after expansionMahesh Rajashekhara2-8/+13
After modifying logical volume size, lsblk command still shows previous size of logical volume. When the driver gets any event from firmware it schedules rescan worker with delay of 10 seconds. If array expansion is so quick that it gets completed in a second, the driver could not catch logical volume expansion due to worker delay. Since driver does not detect volume expansion, driver would not call rescan device to update new size to the OS. Link: https://lore.kernel.org/r/164375211833.440833.17023155389220583731.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Avoid drive spin-down during suspendSagar Biradar1-1/+10
On certain systems (based on PCI IDs), when the OS transitions the system into the suspend (S3) state, the BMIC flush cache command will indicate a system RESTART instead of SUSPEND. This avoids drive spin-down. Link: https://lore.kernel.org/r/164375211330.440833.7203813692110347698.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Resolve delay issue with PQI_HZ valueBalsundar P3-26/+20
Change PQI_HZ to HZ. PQI_HZ macro was set to 1000 when HZ value is less than 1000. By default, PQI_HZ will result into a delay of 10 seconds(for kernel, which has HZ = 100). So in this case when firmware raises an event, rescan worker will be scheduled after a delay of (10 x PQI_HZ) = 100 seconds instead of 10 seconds. Also driver uses PQI_HZ at many instances, which might result in some other issues with respect to delay. Link: https://lore.kernel.org/r/164375210825.440833.15510172447583227486.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Balsundar P <balsundar.p@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix a typo in func pqi_aio_submit_io()Kevin Barnett1-1/+1
Use correct pqi_aio_path_request structure to calculate the offset to sg_descriptors. The function pqi_aio_submit_io() uses the pqi_raid_path_request structure to calculate the offset of the structure member sg_descriptors. This is incorrect. It should be using the pqi_aio_path_request structure instead. This typo is benign because the offsets are the same in both structures. Link: https://lore.kernel.org/r/164375210321.440833.2566086558909686629.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix a name typo and cleanup codeKevin Barnett1-5/+5
Rename the function pqi_is_io_high_priority() to pqi_is_io_high_priority(). Remove 2 unnecessary lines from the function, and adjusted the white space. Link: https://lore.kernel.org/r/164375209818.440833.10908948825731635853.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Quickly propagate path failures to SCSI midlayerMurthy Bhat1-2/+18
Return DID_NO_CONNECT when a path failure is detected. When a path fails during I/O and AIO path gets disabled for a multipath device, the I/O was retried in the RAID path slowing down path fail detection. Returning DID_NO_CONNECT allows multipath to switch paths more quickly. Link: https://lore.kernel.org/r/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Eliminate drive spin down on warm bootSagar Biradar1-1/+7
Avoid drive spin down during a warm boot. Call the BMIC Flush Cache command (0xc2) to indicate the reason for the flush cache (shutdown, hibernate, suspend, or restart). Link: https://lore.kernel.org/r/164375208810.440833.11254644025650871435.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Enable SATA NCQ priority in sysfsGilbert Wu2-4/+117
Add device attribute 'sas_ncq_prio_enable' to enable SATA NCQ priority support and provide I/O priority in SCSI command and pass priority information to controller firmware. This device attribute works only when device has NCQ priority support and controller firmware can handle I/Os with NCQ priority attribute. Link: https://lore.kernel.org/r/164375208306.440833.7392577382127815362.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Add PCI IDsDon Brace1-4/+104
Add in new ZTE controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ZTE SmartROC3100 RS241-18i 2G 9005 / 028F / 1CF2 / 5449 ZTE SmartROC3100 RS242-18i 4G 9005 / 028F / 1CF2 / 544A ZTE SmartIOC2100 RS243-18i 9005 / 028F / 1CF2 / 544B ZTE SmartROC3100 RM241B-18i 2G 9005 / 028F / 1CF2 / 544D ZTE SmartROC3100 RM242B-18i 4G 9005 / 028F / 1CF2 / 544E ZTE SmartIOC2100 RM243B-18i 9005 / 028F / 1CF2 / 544F Add PCI ID for 1100-24i controller: VID / DID / SVID / SDID ---- ---- ---- ---- HBA 1100-24i 9005 / 028F / 9005 / 1304 Add PCI IDs for HPE and Adaptec devices: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec Smart HBA 2200-8io /e 9005 / 028F / 9005 / 1463 Adaptec Smart HBA 2200-16io /e 9005 / 028F / 9005 / 14C2 HPE SR308i-p Gen11 9005 / 028F / 1590 / 0382 HPE SR308i-o Gen11 9005 / 028F / 1590 / 0383 HPE SR932i-p Gen11 9005 / 028F / 1590 / 0381 Add PCI IDs for Inspur controllers: VID / DID / SVID / SDID ---- ---- ---- ---- INSPUR RS0800M5H24i 9005 / 028F / 1BD4 / 006B INSPUR RS0800M5E8I 9005 / 028F / 1BD4 / 006C INSPUR RS0800M5H8I 9005 / 028F / 1BD4 / 006D INSPUR RS0804M5R16i 9005 / 028F / 1BD4 / 006F INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0070 INSPUR RS0800M5H16i 9005 / 028F / 1BD4 / 0071 INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0072 NT RAID 3100-24i 9005 / 028F / 1F0C / 3161 Add HPE and Adaptec OROC PCI IDs: VID / DID / SVID / SDID ---- ---- ---- ---- HPE SR216i-o Gen11 9005 / 028F / 9005 / 036F Adaptec SmartRAID 3284-16io /e/uC 9005 / 028F / 9005 / 1473 Adaptec SmartRAID 3254-16io /e 9005 / 028F / 9005 / 1474 Add PCI IDs for new channel controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartRAID 3254-8i /e 9005 / 028F / 9005 / 14A4 Adaptec SmartRAID 3252-8i /e 9005 / 028F / 9005 / 14A5 Adaptec SmartRAID 3204-8i /e 9005 / 028F / 9005 / 14A6 Align PCI IDs with OOB driver. Easier to check for differences. Link: https://lore.kernel.org/r/164375207802.440833.15947108153078495425.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Co-developed-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Co-developed-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Co-developed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix rmmod stack traceDon Brace1-4/+2
Prevent "BUG: scheduling while atomic: rmmod" stack trace. Stop setting spin_locks before calling OS functions to remove devices. Link: https://lore.kernel.org/r/164375207296.440833.4996145011193819683.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: smartpqi: Switch to attribute groupsBart Van Assche1-21/+25
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-43-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: smartpqi: Call scsi_done() directlyBart Van Assche1-1/+1
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-71-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update version to 2.1.12-055Don Brace1-3/+3
Update driver version to reflect changes. Link: https://lore.kernel.org/r/20210928235442.201875-12-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add 3252-8i PCI idMike McGowen1-0/+4
Add PCI ID information for the Adaptec SmartRAID 3252-8i controller: 9005 / 028F / 9005 / 14A2 Link: https://lore.kernel.org/r/20210928235442.201875-11-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix duplicate device nodes for tape changersKevin Barnett2-4/+20
Stop the OS from re-discovering multiple LUNs for tape drive and medium changer. Duplicate device nodes for Ultrium tape drive and medium changer are being created. The Ultrium tape drive is a multi-LUN SCSI target. It presents a LUN for the tape drive and a 2nd LUN for the medium changer. Our controller FW lists both LUNs in the RPL results. As a result, the smartpqi driver exposes both devices to the OS. Then the OS does its normal device discovery via the SCSI REPORT LUNS command, which causes it to re-discover both devices a 2nd time, which results in the duplicate device nodes. Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix boot failure during LUN rebuildMike McGowen1-1/+1
Move the delay in the register polling loop to the beginning of the loop to ensure there is always a delay between writing the register and reading it. Link: https://lore.kernel.org/r/20210928235442.201875-9-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add extended report physical LUNsMike McGowen3-59/+147
Add support for the new extended formats in the data returned from the Report Physical LUNs command for controllers that enable this feature. The new formats allow the reporting of 16-byte WWIDs. Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Avoid failing I/Os for offline devicesMahesh Rajashekhara1-1/+8
Prevent kernel crash by failing outstanding I/O request when the OS takes device offline. When posted I/Os to the controller's inbound queue are not picked by the controller, the driver will halt the controller and take the controller offline. When the driver takes the controller offline, the driver will fail all the outstanding requests which can sometimes lead to an OS crash. Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add TEST UNIT READY check for SANITIZE operationDon Brace1-0/+87
Send a TEST UNIT READY to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing a sanitize operation. According to SCSI SBC4 specification section 4.11.2 "Commands allowed during SANITIZE", some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until SANITIZE has completed. This can take hours. According to document HPE Smart Storage Administrator User Guide, during the sanitize erase operation, the drive is unusable. I.e. the expected behavior for SANITIZE is the that disk remains offline even after SANITIZE has completed. The customer is expected to re-enable the disk using the management utility. Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update LUN reset handlerKevin Barnett1-39/+66
Enhance check for commands queued to the controller. Add new function pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for submission to controller across all queue groups to drain. Add helper functions to obtain queue command counts for each queue group. These queues should drain quickly as they are already staged to be submitted down to the controller's IB queue. Enhance check for outstanding command completion. Update the count of outstanding commands while waiting. This value was not re-obtained and was potentially causing infinite wait for all completions. Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Capture controller reason codesMurthy Bhat4-20/+57
In some rare cases, the driver can halt the controller. Add a reason code describing why the controller was halted. Store this reason code in a controller register to aid in debugging the issue. Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add controller handshake during kdumpMahesh Rajashekhara3-2/+91
Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.