aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-ti-qspi.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-03-30Merge remote-tracking branches 'spi/topic/sunxi', 'spi/topic/tegra114', 'spi/topic/ti-qspi', 'spi/topic/ti-ssp', 'spi/topic/topcliff-pch', 'spi/topic/txx9', 'spi/topic/xcomm' and 'spi/topic/xfer' into spi-nextMark Brown1-1/+0
2014-03-30Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-nextMark Brown1-1/+0
2014-03-10spi/ti-qspi: Fix return from mmap pathSourav Poddar1-1/+0
mmap resource requirement is only for memory mapped operations. If the user does not populate mmap resource, dont call return, instead we go on for normal spi mode operations. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-16spi: Remove explictly set bus_num and num_chipselect to default settingAxel Lin1-1/+0
The purpose of commit 1e8a52e18cfb "spi: By default setup spi_masters with 1 chipselect and dynamics bus number" is to avoid setting default value for bus_num and num_chipselect in spi master drivers. So let's remove the duplicate code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-By: David Daney <david.daney@cavium.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07spi: Use SPI_BPW_MASK macro at appropriate placesAxel Lin1-1/+2
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qspi', 'spi/topic/s3c24xx', 'spi/topic/s3c64xx', 'spi/topic/sh', 'spi/topic/tegra114', 'spi/topic/tegra20-sflash', 'spi/topic/tegra20-slink', 'spi/topic/txx9' and 'spi/topic/xcomm' into spi-linusMark Brown1-44/+73
2014-01-13spi: ti-qspi: Fixup driver nameAxel Lin1-1/+2
The driver name in current code looks like a compatible string which is not the naming convention for platform drivers. Fix it and also add modalias since this driver can be built as a module. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13spi: ti-qspi: Simplify qspi_write_msg and qspi_read_msg implementationAxel Lin1-41/+20
Make the unit of wlen to be byte, and simplify the code to avoid duplicate code for different wlen cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07spi: ti-qspi: Fix getting correct address for qspiAxel Lin1-7/+1
Now platform_get_drvdata() returns the address of qspi rather than master. Also drop unneeded spi_unregister_master() call in ti_qspi_remove() because we use devm_spi_register_master() in probe. commit cbcabb7a300b "spi/qspi: Fix qspi remove path" assumes platform_get_drvdata() returns address of master. However, commit 160a061301c7 "spi/qspi: set correct platform drvdata in ti_qspi_probe()" pass qspi to platform_set_drvdata(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi/qspi: Fix runtime resume pathSourav Poddar1-3/+1
Due to the following commit commit 160a061301c7adf54c40696e7ceedc73f6b747dd Author: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Date: Mon Nov 11 14:13:41 2013 +0800 spi/qspi: set correct platform drvdata in ti_qspi_probe() The ti_qspi_remove() use the platform drvdata as a type of struct ti_qspi, we should pass correct platform drvdata to platform_set_drvdata() in ti_qspi_probe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org> platform_set_drvdata was changed in the probe, so we need to correspondingly change deferencing of qspi in runtime resume path. Else, this will lead to a NULL dereference pointer. Based on v3.13-rc3 Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19spi/qspi: parse register by name.Sourav Poddar1-2/+51
Modify the qspi driver to parse reg information by name. If "reg names" is not found, then revert back to normal get resource. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24spi/qspi: Fix qspi remove path.Sourav Poddar1-1/+17
There is a bug in qspi removal path, as a result of which qspi cannot be removed when used as a module. The patch solves the bug and qspi can be removed cleanly. The bugs fixed are: -pm_runtime used around register access. - pm_runtime_disable need to be done before removal. - spi_unregister_master need to be called to unregister the spi device. Tested on DRA7 board. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24spi/qspi: cleanup pm_runtime error check.Sourav Poddar1-1/+1
clean up pm_runtime error check in accordance with rest of the check in the driver. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24spi/qspi: set correct platform drvdata in ti_qspi_probe()Wei Yongjun1-2/+1
The ti_qspi_remove() use the platform drvdata as a type of struct ti_qspi, we should pass correct platform drvdata to platform_set_drvdata() in ti_qspi_probe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-07Merge remote-tracking branch 'spi/topic/devm' into spi-qspiMark Brown1-3/+2
Conflicts: drivers/spi/spi-ti-qspi.c
2013-10-07spi: ti-qspi: one only one interrupt handlerSebastian Andrzej Siewior1-33/+6
The here used irq and threaded irq handler is a complete non-sense. After the status register is read and the source disabled it schedules a thread (the irq thread) to read the status from the variable, invoke complete() and then renable the interrupt. Again: schedule a thread which invokes _only_ complete(). This patch removes this non-sense and we remain with one handler which invokes complete() if needed. The device remove path should now disable the interupts. This has been compile time tested. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi/qspi: Add dual/quad read mode bit.Sourav Poddar1-1/+1
Add dual/quad read mode bit flag for the master controller. These check will be used in the spi framework to determine whether the master controller can do dual/quad read respectively. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi: ti-qspi: use devm_spi_register_master()Jingoo Han1-11/+1
Use devm_spi_register_master() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01spi/qspi: fix missing unlock on error in ti_qspi_start_transfer_one()Wei Yongjun1-0/+1
Add the missing unlock before return from function ti_qspi_start_transfer_one() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27spi/qspi: Add compatible string for am4372.Sourav Poddar1-0/+1
Add a compatible string for am4372. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27spi/qspi: Fix device table entrySourav Poddar1-1/+1
Fix module device table entry. Without this, there will be a build failure while trying to build qspi as a module. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23spi/qspi: Add dual/quad spi read supportSourav Poddar1-1/+12
Support for multiple lines in SPI framework has been picked[1]. [1]: http://comments.gmane.org/gmane.linux.kernel.spi.devel/14420 Hence, adapting ti qspi driver to support multiple data lines for read. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22spi/qspi: Add qspi flash controllerSourav Poddar1-0/+561
The patch add basic support for the quad spi controller. QSPI is a kind of spi module that allows single, dual and quad read access to external spi devices. The module has a memory mapped interface which provide direct interface for accessing data form external spi devices. The patch will configure controller clocks, device control register and for defining low level transfer apis which will be used by the spi framework to transfer data to the slave spi device(flash in this case). Test details: ------------- Tested this on dra7 board. Test1: Ran mtd_stesstest for 40000 iterations. - All iterations went through without failure. Test2: Use mtd utilities: - flash_erase to erase the flash device - mtd_debug read to read data back. - mtd_debug write to write to the data flash. diff between the write and read data shows zero. Acked-by: Felipe Balbi<balbi@ti.com> Reviewed-by: Felipe Balbi<balbi@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.