aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/ath6kl/include/common (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-08-13staging: remove ath6klKalle Valo30-8093/+0
ath6kl is now in drivers/net/wireless/ath so the staging driver is not supported anymore and should be removed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-06ath6kl: Remove ununsed macros from gpio_reg.hVasanthakumar Thiagarajan4-678/+9
After this there is no difference between hw2.0/hw/gpio_reg.h and hw4.0/hw/gpio_reg.h, so remove the duplication. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06ath6kl: Remove gpio.h and gpio_api.hVasanthakumar Thiagarajan2-46/+0
The macros and function proto types in these files are not used anywhere. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06ath6kl: Remove unused eeprom.cVasanthakumar Thiagarajan1-209/+0
Also delete si_reg.h which is only used in eeprom.c Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06ath6kl: Remove dead code with CONFIG_AR6002_REV1_FORCE_HOSTVasanthakumar Thiagarajan1-36/+0
This is not defined anywhere, also delete vmc_reg.h which is used only in the dead code. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06ath6kl: Remove somemore unused header filesVasanthakumar Thiagarajan7-2146/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove few more unused header filesVasanthakumar Thiagarajan4-230/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Replace data type macros with kernel defined onesVasanthakumar Thiagarajan2-2/+2
Now athtypes_linux.h and a_types.h are unused, remove them. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused macros from gpio_reg.hVasanthakumar Thiagarajan3-2638/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused regdump.hVasanthakumar Thiagarajan2-111/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove somemore unused header files from hw4.0/hw/Vasanthakumar Thiagarajan6-4687/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused hw4.0/hw/vmc_reg.hVasanthakumar Thiagarajan2-199/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused bb_lc_reg.hVasanthakumar Thiagarajan1-7076/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused hw2.0/hw/uart_reg.hVasanthakumar Thiagarajan2-547/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove duplicate si_reg.hVasanthakumar Thiagarajan1-186/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove duplicate rtc_reg.hVasanthakumar Thiagarajan3-3846/+0
Also remove unused rtc register definition from rtc_reg.h. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove duplicate mbox_wlan_reg.hVasanthakumar Thiagarajan2-530/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove duplicate mbox_host_reg.hVasanthakumar Thiagarajan2-437/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove duplicate abp_map.hVasanthakumar Thiagarajan1-13/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03ath6kl: Remove unused analog_register header filesVasanthakumar Thiagarajan5-8985/+0
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03staging: ath6kl: open/shared auth implementationNaveen Singh1-0/+5
If the wpa_supplicant conf file supplies both open and shared algorithm, and AP is configured as shared then connection never happens. Since it is a FMAC driver additional logic is added in driver which first detects this, then tries open algorithm for the first time and when it fails tries the shared algo. kvalo: fix style issues Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25ath6kl: add the device ID on the data command packetNaveen Singh1-1/+22
The firmware expects the device ID to be added on the data and command packets sent to firmware for AR6003 v2.1.1. Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25ath6kl: Extend WMI API used by AR6003 v2.1.1Naveen Singh1-13/+82
These commands and event IDs are used by AR6003 v2.1.1. Some events are no longer needed so these are removed now. Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25ath6kl: add support for AR6003 v2.1.1Naveen Singh1-34/+192
This adds support for AR6003 v2.1.1. Highlights changes for this new hardware are: 1. Host interest area, through which driver communicates with FW has been enhanced to accomodate additional members for proper functioanlity of new HW. 2. The firmware and the board data files are different for AR6003 v2.1.1. The capability to read those file have been added in the driver. 3. Certain parameters like numdevice, firmware mode needs to be programmed for proper functionality of new driver. Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13Staging: merge 2.6.39-rc3 into staging-nextGreg Kroah-Hartman7-12/+12
This was done to handle a number of conflicts, the majority of which were caused by the big "fix spelling issues" patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04ath6kl: remove unused define WLAN_HEADERSLuis R. Rodriguez8-80/+0
All the code is used so just keep it and remove the static define. Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04ath6kl: remove dependency on LINUX and KERNEL_2_6 macrosLuis R. Rodriguez11-89/+0
Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04ath6kl: remove Bluetooth PAL code and WMI ACL TX/RX data supportLuis R. Rodriguez1-1/+1
ath6kl used to have an internal PAL for Bluetooth 3.0 support but this is no longer supported. The target used a WMI with an ACL header for supporting these frames. Userspace would use the ioctl AR6000_XIOCTL_ACL_DATA to send data to the target and the firmware would generate ACL frames. Remove both the parsing of the frames and the ioctl support. We leave a warning for now for if the target generates some sort of ACL data frame, later on we can remove this warning once we have proven the target is no longer generating these frames. It should be noted this also provides a fix for the processing of spurious ACL data frames from the target, previously they would not be dropped if they were generated by the target but EXPORT_HCI_PAL_INTERFACE was not compiled in. Cc: Naveen Singh <nsingh@atheros.com> Cc: Prerepa (Dham) Viswanadham <dham@atheros.com> Cc: Shanmugamkamatchi Balashanmugam <sbalashanmugam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi7-12/+12
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-14ath6kl: remove-typedef HTC_FRAME_HDRLuis R. Rodriguez2-5/+5
remove-typedef -s HTC_FRAME_HDR \ "struct htc_frame_hdr" drivers/staging/ath6kl/ Tested-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11staging: ath6kl: remove-typedef: A_UCHARLuis R. Rodriguez4-5/+5
remove-typedef -s A_UCHAR u8 drivers/staging/ath6kl/ This uses the remove-typedef utility: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/remove-typedef Cc: Naveen Singh <naveen.singh@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18staging: ath6kl: Add configuration for excessive TX retry thresholdVipin Mehta1-11/+25
Adding host side interface to configure the excessive TX retry threshold. It is used by the target to determine disconnection triggers. Additionally, some definitions have been added to header file wmi.h to bridge the gap for the newly added command. Signed-off-by: Vipin Mehta <vmehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Remove #define A_OKJoe Perches2-3/+2
Just use 0. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_INT32 to s32Joe Perches2-8/+8
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_INT16 to s16Joe Perches1-18/+18
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_INT8 to s8Joe Perches1-16/+16
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_UINT64 to u64Joe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_UINT32 to u32Joe Perches18-484/+484
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_UINT16 to u16Joe Perches12-193/+193
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_UINT8 to u8Joe Perches11-563/+563
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Convert A_CHAR to charJoe Perches2-7/+7
Remove obfuscating A_CHAR uses, just use char. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: ath6kl: Remove A_BOOL and TRUE/FALSEJoe Perches1-8/+0
Use kernel bool and true/false. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-31staging: ath6kl: wmi.h: Convert packed structures with A_BOOL to u32Joe Perches1-8/+8
These structures are device native and need to be 4 bytes long. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vipin Mehta <vipin.mehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-31staging: ath6kl: Remove A_FAILED macroJoe Perches1-2/+0
Remove obfuscating A_FAILED(foo) macro. Just test for foo instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vipin Mehta <vipin.mehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-31staging: ath6kl: Remove A_SUCCESS macroJoe Perches1-2/+1
Remove obfuscating A_SUCCESS(foo) macro. Just test for !foo instead. Reformat a few macros that used A_SUCCESS for better readability. Add do { foo } while (0) surrounds to those macros too. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vipin Mehta <vipin.mehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-31staging: ath6kl: Convert enum A_STATUS to intJoe Perches1-36/+39
Convert enum members to int as well. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Vipin Mehta <vipin.mehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-08staging: ath6kl: Eliminating the symlink to 2.0 header filesVipin Mehta11-1/+0
Moving the AR6002 hw 2.0 specific register definitions files from the hw.0 directory to a new directory, 'hw' within hw2.0. Signed-off-by: Vipin Mehta <vmehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-02staging: add ath6kl driver for AR6003 chipVipin Mehta68-0/+40596
AR6003 is a single stream, SDIO based 802.11 chipset from Atheros optimized for mobile and embedded devices. ath6kl is a cfg80211 driver for AR6003 and supports both the station and AP mode of operation. Station mode supports 802.11 a/b/g/n with HT20 on 2.4/5GHz and HT40 only on 5GHz. Some of the other features include WPA/WPA2, WPS, WMM, WMM-PS, and BT coexistence. AP mode can be operated only in b/g mode with support for a subset of features mentioned above. The driver supports cfg80211 but comes with its own set of wext ioctls which have historically supported some of our customers with features like BT 3.0 and AP mode of operation. For further details, please refer to: http://wireless.kernel.org/en/users/Drivers/ath6kl The driver requires firmware that runs on the chip's network processor. The majority of it is stored in ROM. The binaries that are downloaded and executed from RAM are as follows: 1) Patch against the code in ROM for bug fixes and feature enhancements. 2) Code to copy the data from the OTP region of the memory into RAM. 3) Calibration file carrying board specific data. The above files need to be present in the directory '/lib/firmware/ath6k/AR6003/hw2.0/' for the driver to initialize the chip upon enumeration. The files can be downloaded from the link specified at the following location: http://wireless.kernel.org/en/users/Drivers/ath6kl#Download This driver is only provided in the interim while we work on the mac80211 replacement, ath6k. Once the mac80211 driver achieves feature parity with the ath6kl driver, the ath6kl will be deprecated and removed from staging. Signed-off-by: Vipin Mehta <vmehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.