aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/iio/adc
AgeCommit message (Collapse)AuthorFilesLines
2022-02-21iio:adc:ad7280a: Move out of stagingJonathan Cameron3-1123/+0
This is a rather unusual device (in IIO anyway). However, it has a near to standard userspace ABI. Note the work to move this out of staging was done against a minimal QEMU model, which doesn't model all the features of the device. I have no intention to upstream the QEMU model as it was developed just to enable this driver cleanup. https://github.com/jic23/qemu/tree/ad7280a-hacks Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-21-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Use more conservative delays to allow 105C operation.Jonathan Cameron1-2/+2
The datasheet provides timings for operating this device at up to 105 degrees centigrade. Adopt these more conservative timings. Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-20-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Remove shift from cb_mask state cache.Jonathan Cameron1-5/+7
Making the local storage of the Cell Balance mask a simple bitmap and then shifting it only at time of register write simplifies several code paths. Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-19-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Drop buggy support for early termination of AUX alert.Jonathan Cameron1-22/+0
This functionality is intended to allow for a few temperature sensors to be missing (and hence not worth reading) on the final device in a chain. The ones removed are 3 and 5 (unlike for the ADC channels where it is 4 and 5). The datasheet includes a foot note 3 to Table 12 that makes this complex to support. "(3) To remove AUX5 or AUX5 and AUX3 from the alert detection, conversions on three auxiliary ADC input channels only must be selected in the control register." This mode has never been supported by the driver. As this support would be complex to add and the rework is being done against a QEMU model developed for the purposes of verifying nothing is broken, it is better to drop this support for now. Reported-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-16-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Use device properties to replace platform data.Jonathan Cameron2-45/+86
Convert all the device specific info that was previously in platform data over to generic firmware query interfaces. dt-bindings to follow shortly. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-15-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Use a local dev pointer to avoid &spi->devJonathan Cameron1-4/+5
We use this a few times already and it is about to get worse, so introduce a local variable to simplify things. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-14-jic23@kernel.org
2022-02-21staging:iio:ad7280a: Reflect optionality of irq in ABIJonathan Cameron1-19/+29
Given the irq is optional, let us remove the interfaces related to events when it is not present. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-13-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Cleanup includesJonathan Cameron1-7/+9
Drop used includes, add a few missing ones and reorder. The include-what-you-use tool output was considered in making this change. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-12-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Make oversampling_ratio a runtime controlJonathan Cameron2-34/+72
Oversampling has nothing directly to do with analog circuits or similar so belongs in the control of userspace as a policy decision. The only complexity in here was that the acquisition time needs updating if this setting is changed at runtime (as oversampling is time consuming). Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-11-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Trivial comment formatting cleanupJonathan Cameron1-10/+11
IIO uses the /* * stuff * more stuff */ multi-line style, so use that here as well. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-10-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Drop unused timestamp channel.Jonathan Cameron1-13/+1
The driver doesn't support buffered mode, so a timestamp channel that is entirely hidden from userspace without buffer mode is rather pointless. Drop it. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-9-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Standardize extended ABI namingJonathan Cameron1-131/+43
The *_balance_switch_en and *_balance_switch_timer attributes had non standard prefixes. Use the ext_info framework to automatically create then with in_voltageX-voltageY_ prefix. Documentation for these two unusual attributes to follow. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-8-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Switch to standard event controlJonathan Cameron1-103/+110
This driver had a slightly non standard events ABI but there seems to be no reason for not doing it with the core support for rising and falling events on the two types of channels. In theory the events on different daisy chained chips could be at different levels, but the driver has never supported this and it doesn't seem likely to be used so let us ignore that option. Includes reordering so that we only set the software cached value of the thresholds if the hardware write succeeds. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-7-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Use bitfield ops to managed fields in transfers.Jonathan Cameron1-19/+45
The write and two types of read transfer are sufficiently complex that they benefit from the clarity of using FIELD_PREP() and FIELD_GET(). This also applies to the handling in ad7280_event_handler() so use a similar approach there as well. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-6-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Split buff[2] into tx and rx partsJonathan Cameron1-8/+9
As the __cacheline_aligned will ensure that the first of these two buffers is appropriate aligned, there is no need to keep them as a single array which is confusing given the first element is always tx and the second rx. Hence let us just have two parts and name them separately. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-5-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: rename _read() to _read_reg()Jonathan Cameron1-4/+4
This avoids possible confusion with read back of the channel conversions. These two types of reads are of difference sizes with resulting differences in the data layout of the response from the hardware. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-4-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Register define cleanup.Jonathan Cameron1-128/+151
1. Postfix register addresses with _REG to distinguish them from fields within the registers 2. Switch to using FIELD_PREP and masks to aid readability. 3. Shorten a few defines to make the lines remain a sensible length. 4. Fix an issue whether where an CTRL_LB field is set in CTRL_HB. 5. Fix wrong AUX1_3_4 which should be AUX_1_3_5 according to table 14 in the datasheet. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-3-jic23@kernel.org
2022-02-21staging:iio:adc:ad7280a: Fix handing of device address bit reversing.Jonathan Cameron1-2/+2
The bit reversal was wrong for bits 1 and 3 of the 5 bits. Result is driver failure to probe if you have more than 2 daisy-chained devices. Discovered via QEMU based device emulation. Fixes tag is for when this moved from a macro to a function, but it was broken before that. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Fixes: 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse") Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-2-jic23@kernel.org
2020-06-14iio: remove explicit IIO device parent assignmentAlexandru Ardelean2-2/+0
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-23staging: iio: adc: ad7280a: Add comments to clarify stringified argumentsDeepak R Varma1-0/+4
Checkpatch would flash a check message around a stringified macro argument containing a '-' character. Add comment to indicate the argument is legitimate and doesn't need fixing. Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/469bf8db1c228913e72841367182fba2168fe795.1584904896.git.mh12gx2825@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-08staging: iio: adc: ad7192: move out of stagingAlexandru Tachici3-1047/+0
Move ad7192 ADC driver out of staging into mainline. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: adc: ad7192: removed spi_device_idAlexandru Tachici1-22/+11
This patch removes spi_device_id table and moves the init data (id of the chip) in the .data field of of_device_id table. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: adc: ad7192: modify iio_chan_spec arrayAlexandru Tachici1-46/+66
This patch changes the static const struct iio_chan_spec arrays in a way that all the necessary attributes are set at compile time. Now ad7192_channels_config only makes the channels attribute of iio_dev point to the right array depending on the chip. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: adc: ad7192: fail probe on get_voltageAlexandru Tachici1-2/+5
This patch makes the ad7192_probe fail in case regulator_get_voltage will return an error or voltage is set to 0. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-09-08staging: iio: adc: ad7192: Add system calibration supportMircea Caprioru1-1/+78
This patch will add a system calibration attribute for each channel. Using this option the user will have the ability to calibrate each channel for zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM to implement the functionality. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-18staging: iio: adc: ad7192: Add low_pass_3db_filter_frequencyMircea Caprioru1-16/+133
By adding this option we are able to remove the sync3 field and dt binding. When setting the required cutoff frequency we also determine the ADC configuration for chop and sync filter. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-18staging: iio: adc: ad7192: Remove platform dataMircea Caprioru2-49/+2
This patch removes the reference voltage entry from the platform_data structure. This is no longer needed since the reference voltage is obtained from the device tree. With this we also remove the entire ad7192.h file. The undefined reference voltage warning is promoted to an error signaling a problem with the device tree. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27staging: iio: ad7192: create of_device_id arrayBárbara Fernandes1-0/+12
Create list of compatible device ids to be matched with those stated in the device tree. Signed-off-by: Bárbara Fernandes <barbara.fernandes@usp.br> Signed-off-by: Wilson Sales <spoonm@spoonm.org> Co-developed by: Wilson Sales <spoonm@spoonm.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05staging: iio: adc: Add paragraph to describe Kconfig symbolVatsala Narang1-0/+3
This patch updates Kconfig with paragraph that describe config symbol fully.Issue addressed by checkpatch. Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-21Merge 5.1-rc6 into staging-nextGreg Kroah-Hartman1-4/+4
We want the fixes in here as well as this resolves an iio driver merge issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04Merge tag 'iio-for-5.2a-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-nextGreg Kroah-Hartman6-442/+199
Jonathan writes: First set of new device support, features and fixes for IIO in the 5.2 cycle Staging graduations * ad7780 - Move this ADC driver out of staging. Included adding some new features along the way (see below). Also added DT bindings. New device support * adis16480 - Support the ADIS16495 and ADIS16497 IMU devices making heavy use of refactoring of various aspects of the driver in precursor patches. * lsm6dsx - Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor. - Support for the LSM6DS0X * matbotix mb1232 - New driver for this ultrasound ranging device family. Including bindings. - Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137. * max31856 - New driver for this thermocouple temperature sensor. * meson saradc - Support the Meson-G12A (ID addition only). * stmpe-adc - New driver supporting generic ADC alongside touchscreen support which previously existed. Includes DT bindings. * vcnl4000 - Support for the vcln4040 proximity and light sensor, including adding DT bindings for this and parts previously supported. Features * core - Allow reading of mount matrices from ACPI in addition to DT. - Common binding for theromcouple types. * ad5933 - Add ABI docs as there are a few 'unsual' elements about this device - perhaps because it's our only impedance analyser. * ad7780 - Add gain and filter gpio support + readback of current gain and filter. * adis16480 - Allow selection fo the dataready pin to be used. - Device tree ID table and binding documentation. - Support external clock modes, including new bindings. * bma180 - Mount matrix support. * bmc150 - Mount matrix support. * bmg160 - Mount matrix support. - DT id table and bindings doc. * bmp280 - Put calibration data into the entropy pool. * hmc5843 - Mount matrix support. * itg3200 - Mount matrix support. * kxcjk1013 - Device tree id table, and binding docs. * lpc32xx - Add scale when regulator specified including DT docs for regulator. * pms7003 - Add device IDs for all supported parts to driver and binding. * stm32-dfsdm - Enable hw consumer support, scan mode control and a complex set of triggered buffer modes. - Power management. * stm32-lptimer-counter - power management. - Document the pinctrl sleep state binding. * ti-ads7950 - GPIO pin support. Cleanups, minor fixes * core - Use bitmap_zalloc to make it explicit that is what we are doing. - Tidy up all the Kconfig files (which had slowly gotten messy) - Fix a forwards definition missing issue in iio/driver.h * ad sigma delta core - Improve handling of SPI bus locking vs CS assertion. This has been wrong a long time so not rushing this in. * ad5064 - Mlock to local lock. * ad5933 (staging cleanup) - Multiline comment fixes. - Include ordering. - SPDX. - Tidy up Kconfig help which was a bit missleading. - Change some non standard attributes to ABI defined ones. * ad7124 - White space fix. * ad7192 - White space. - Use DT clock binding. - Improve error reporting. - Platform data to DT conversion. - Use read_avail callback, mostly to avoid the endless series of patches from new contributors trying to falsely put spaces around the negative sign. * ad7280a - Add brackets to macros to avoid potential precedence isseus. - Add temp vars for event codes to reduce indent and improved readability. - Clean out som CamelCase notation. - White space. * ad7606 - Fix broken file naming in MAINTAINERS. * ad7780 - Missing switch defaults to supress warnings and harden the code slightly. - Set pattern masks more directly. - Add ID values and masks for all supported chips. - SPDX + add Renato as a copyright holder as he has done a lot of work on this driver. - Add brackets to macros to avoid potential precedence issues. * ad7923 - White space fixes. - Use BIT macro to improve readability. - Add brackets to macros to avoid potential precedence issues. - Tidy up a null comparisom. * ad9523 - Fix a typo in naming of variables. * adis16400 - Combine trigger file into main code as no advantage in separate files. Rename core file to just adis16400. - Squash the header into the c file now there is only one file. - Generalize burst mode to support new variants. * ak8975 - Local variable to improve readability around mount matrix support. * as3935 - Avoid potential race by ensuring remove does exact opposite of probe rather than a slightly different order. * cross_ec - Drop some unnecessary includes. - Fix some warning and the slightly 'unusual' code. - Add some docs for non obvious function. - SPDX * hmc5843 - Potential unhandled error case. * iio trigger core - Print an error if there is no available irq due to max consumers per trigger being set to low. * iio loop trigger - Drop an unlikely on IS_ERR as IS_ERR already has the annotation. * ingenic-adc - Drop a redundant dev_err call as devm_ioremap_resource reports the same internally. * lmp91000 - Drop some unncessary parentheses and white space tidy up. - Invert and if statement to improve readability. - Fix a wrong error message. * lpc32xx - Header sorting + drop some unused ones. * mma8542 - Mark a switch fallthrough. * mpu6050 - Add a local variable to improve code readability around mount matrix support. * mxs-lradc-adc - Handle devm_iio_trigger_alloc failure. * sps30 - Fix up a kernel version in the ABI docs. * srf04 - DT binding doc converted to yaml. * ssp_sensors - Supress a clang build warning due to lack of visibility of conditional within a iio_push_to_buffers_with_timestamp. (reasonable false warning!) * st_accel - Drop pointless less than 0 comparisom of unsigned int. * stm32-dfsdm - Improve accuracy of spi_master_frequency calculation. - Improve calculation fo sampling frequency. - Rework various internals to simplify adding triggered buffer support. - Claim direct mode to avoid racing around read_raw and being in buffered mode. * stmpe - Fix a clang false positive warning. * ti-ads7950 - Use local lock rather than using the core mlock when not locking around the device mode. * vcnl4000 - Use word writes instead of byte writes. It seems byte writes are fine for some parts (undocument) but not others that the driver will shortly support. Other * mailmap - Add email address change for Sean Nyekjaer. Update in relevant drivers * tag 'iio-for-5.2a-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (129 commits) iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion iio: adc: stm32-dfsdm: add PM support iio: adc: stm32-dfsdm: improve sampling frequency accuracy staging: iio: adc: ad7280a: Tab alignment MAINTAINERS: Fix the link to ad7606 dt-bindings iio:temperature: Add MAX31856 thermocouple support iio:temperature:max31856:Add device tree bind info dt-bindings: iio/temperature: Add thermocouple types (and doc) devantech-srf04.yaml: transform DT binding to YAML iio: frequency: ad9523: Fix typo in ad9523_platform_data iio: Make possible to include driver.h first dt-bindings: iio: add Bosch BMG160 gyroscope sensor iio: gyro: bmg160: add device tree compatibility table staging: iio: adc: ad7192: Use read_avail for available attributes dt-bindings: iio: light: add vcnl4040 devicetree bindings iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor dt-bindings: iio: light: add vcnl4000 devicetree bindings iio: light: vcnl4000 add devicetree hooks iio: light: vcnl4000 use word writes instead of byte writes iio: adc: stm32-dfsdm: claim direct mode for raw read and settings ...
2019-04-04staging: iio: adc: ad7280a: Tab alignmentCristian Sicilia1-18/+18
Aligned some parameters. Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7192: Use read_avail for available attributesMircea Caprioru1-38/+61
This patch removes the in_voltage-voltage_scale_available and in_voltage_scale_available attributes. These are replaced with available attributes added in info_mask_shared_by_type_available. With this modification the iio core will be responsible with naming the attributes thus removing the checkpatch warning related to in_voltage-voltage_scale_available naming. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7280a: Remove CamelCase notationCristian Sicilia1-6/+5
Fix CamelCase naming. Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7280a: Adding temp var to improve readabilityCristian Sicilia1-30/+25
Creating a temporary variable to improve readability Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7280a: Avoid precedence issues in macroCristian Sicilia1-3/+4
Enclosing parameter with parenthesis due to avoid possible precedence issue. Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: moving ad7780 out of stagingRenato Lui Geh3-390/+0
Move ad7780 ADC driver out of staging and into the mainline. The ad7780 is a sigma-delta analog to digital converter. This driver provides reading voltage values and status bits from both the ad778x and ad717x series. Its interface also allows writing on the FILTER and GAIN GPIO pins on the ad778x. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add new copyright holderRenato Lui Geh1-0/+1
This patch adds a new copyright holder to the ad7780 driver. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add SPDX identifierRenato Lui Geh1-2/+1
Add SPDX identifier (GPL-2.0) to the AD7780 driver. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: move regulator to after GPIO initRenato Lui Geh1-10/+10
To maintain consistency between ad7780_probe and ad7780_remove orders, regulator initialization has been moved to after GPIO initializations. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging:iio:ad7780: add chip ID values and maskRenato Lui Geh1-0/+6
The ad7780 supports both the ad778x and ad717x families. Each chip has a corresponding ID. This patch provides a mask for extracting ID values from the status bits and also macros for the correct values for the ad7170, ad7171, ad7780 and ad7781. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: set pattern values and masks directlyRenato Lui Geh1-11/+9
The AD7780 driver contains status pattern bits designed for checking whether serial transfers have been correctly performed. Pattern macros were previously generated through bit fields. This patch sets good pattern values directly and masks through GENMASK. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add filter reading to ad778xRenato Lui Geh1-4/+14
This patch adds the new feature of reading the filter odr value for ad778x chips. This value is stored in the chip's state struct whenever a read or write call is performed on the chip's driver. This feature requires sharing SAMP_FREQ. Since the ad717x does not have a filter option, the driver only shares the relevant info mask for the ad778x family. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add gain reading to ad778xRenato Lui Geh1-0/+5
This patch adds a new functionality of reading gain values from the ad778x chips. This value is stored in the chip's state struct and is updated whenever a read or write call is performed on the driver. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add missing switch default caseRenato Lui Geh1-0/+2
This patch simply adds a missing switch default case in read_raw. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: ad7780: add gain & filter gpio supportRenato Lui Geh1-18/+96
Previously, the AD7780 driver only supported gpio for the 'powerdown' pin. This commit adds suppport for the 'gain' and 'filter' pin. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7192: Convert platform data to DT propertiesMircea Caprioru2-19/+21
This patch will remove platform data members and replace them with device tree properties. These properties will be subject to further modifications and probably replaced with other functionalities at some point in time. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7192: Report error directly in ad7192_setupMircea Caprioru1-8/+5
This patch removes the goto out statement and uninformative print message. This improves readability. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7192: Use DT clock bindingMircea Caprioru2-28/+58
This patch replaces the platform data clock select member with DT clock binding. Through the DT the external clock binding is specified. If this is not provided then the device will use the internal clock source. With the external clock binding there is the option to use a clock or a crystal as the clock source. When an external crystal is used it is connected to MCLK1 and MCLK2 pins. If the external clock is used only MCLK2 pin will be connected. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04staging: iio: adc: ad7192: Fix identationMircea Caprioru1-2/+2
This patch fixes the odd indentation inside function ad7192_calibrate_all. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.