| Age | Commit message (Collapse) | Author | Files | Lines |
|
This driver was deprecated with the introduction of the r8188eu driver,
based upon Realtek sources that were modified for CFG80211 support and
other fixes on GitHub by Larry Finger. As that driver is now progressing
at pace, we should remove this one.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731133809.196681-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IQKMatrixRegSetting array in struct odm_rf_cal is initialised
but never used. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
phy_lc_calibrate's is2t parameter is always false.
Remove some code that would be called only for is2t == true.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
path_adda_on's is2t parameter is always false.
Remove some code that would be called only for is2t == true.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
phy_iq_calibrate's is2t parameter is always false.
Remove some code that would be called only for is2t == true.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The boolean is2t variable in rtl88eu_phy_iq_calibrate is always false.
Remove some code that's unused in this case.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210726195354.28548-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
HwRxPageSize from struct hal_data_8188e is set but never read. Remove the
component and the code to initialise it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The IntrMask array is set but never read. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RegTxPause and RegBcnCtrlVal from struct hal_data_8188e are set but
never read. Remove them.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pwrpriv->bFwCurrentInPSMode is initialized and updated but nobody reads
its value. Remove this write-only component.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This define can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hwinfo and AutoLoadFail parameters can be obtained from
struct adapter, there's no need to pass them as separate
function parameters.
Use memcpy instead of bytewise copy if we have to fall back to the
hard-coded mac address.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "HAL layer variable" HW_VAR_TXPAUSE is not used in this driver.
Remove its define and the code for setting and for reading a value.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "HAL layer variable" HW_VAR_MEDIA_STATUS1 is not used in this driver.
Remove its define and the code for setting a value.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210725155902.32433-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove braces from single line if blocks to clear checkpatch warnings.
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210726092129.30334-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary blank lines reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210726091014.21405-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
None of the power flows and transitions includes a read command.
PWR_CMD_READ can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rtl88eu_pwrseqcmdparsing function takes a parameter to restrict
commands to certain power cut versions of the rtl8188eu chipset.
This mechanism is not used, the callers always select all versions.
Remove the power cut parameter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver defines a couple of "flows" to move the chip into a certain
power state. Each flow is a sequence of "transitions".
This patch removes flows and transitions which are not used.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This setting is used only in one place. There's no need to store it
in a global struct.
While at it, merge the two-line Hal_InitPGData88E function and its
only caller.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hal variable to trigger gpio 0 seems to be a leftover from debugging
code that was removed. An empty function is called when this variable is
written to.
Remove the empty function and the variable itself. It should be safe to
remove an entry from the hw_variables enum as this enum is used only
within the rtl8188eu driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All that rtw_hal_read_chip_info does is call _ReadPROMContent. Merge the
two functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210718173610.894-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move source file hal/mac_cfg.c to the 'core' driver directory, and also
rename its array from array_MAC_REG_8188E to array_MAC_REG, as well as
renaming the function rtl88eu_phy_mac_config to phy_mac_config. Also
modify single call-site for this function to reflect new name.
This file contains no code which touches the adapter's HalData structure,
and is a good candidate for therefore moving out of 'hal'. Also, no
need for these signatures to include the model number as this driver
only supports RTL8188eu.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210720225826.454516-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The while-loop only iterates once becase the post increment test of count
being non-zero is false on the first iteration because count is zero. Fix
this by using a for-loop instead. Static analysis found the issue on the
count > POLLING_LLT_THRESHOLD check always being false since the loop
currently just iterates once.
Thanks to David Laight for suggesting using for-loop instead to improve
the readability of the fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210630065647.5641-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove GlobalDebugLevel variable and all of its uses, as it is now
no longer used anywhere in this driver.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210625000756.6313-23-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all RT_TRACE calls from hal/rtl8188eu_recv.c as this macro is
unnecessary, and these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210625000756.6313-20-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all RT_TRACE calls from hal/hal_intf.c as this macro is
unnecessary, and these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210625000756.6313-19-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all RT_TRACE calls from hal/rtl8188eu_xmit.c as this macro is
unnecessary, and these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210625000756.6313-18-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove MSG_88E call from hal/odm.c as this macro is unnecessary,
and this call is dubious in terms of necessity. Removing all calls
will ultimately allow the removal of the macro itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210623234902.7411-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove HAL_INIT_PROFILE_TAG, which is an empty loop already.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
if and else do the same thing.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A number of efuse-related functions have an "efuse type" parameter.
This type is not used and can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove block comment about function HwSuspendModeEnable92Cu.
The comment contains no useful information and there is even
no HwSuspendModeEnable92Cu function in the driver code.
'git grep -n HwSuspendModeEnable92Cu drivers/staging/rtl8188eu'
returns nothing.
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210619175055.5122-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the _dbg_dump_tx_info function from hal/rtl8188e_xmit.c, as
it doesn't actually do anything and is only called from one place.
It used to have some redundant debugging statements in it, but these
have now been removed anyway, so all it does is read information from
the adapter to set a variable 'dump_txdesc' which is then never used.
This fixes a kernel test robot warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove set but unused variables from within the file hal/rtl8188e_cmd.c
in the function rtl8188e_set_FwMediaStatus_cmd, as they are triggering
kernel test robot warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-7-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify trycnt condition in the do/while loop of rtw_hal_set_hwreg to use
a prefix decrement operator instead of postfix. As an unsigned 8-bit
integer, this value would actually be 255 after the end of the do/while
loop, which is almost certainly not what was intended. It is more
reasonable to assume a loop counter should be zero at the end of all
loop iterations. Indeed, the line following the loop previously contained
an if statement which assumed trycnt was 0, and therefore was never
triggered.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/rtl8188eu_xmit.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-25-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/rtl8188eu_recv.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-24-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/usb_halinit.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself. Also remove unused jiffies variable from the start of
rtl8188eu_hal_init.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-23-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/rtl8188e_xmit.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-22-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/rtl8188e_hal_init.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-21-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/pwrseqcmd.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-20-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/rtl8188e_cmd.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-19-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all DBG_88E calls from hal/hal_intf.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615001507.1171-18-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bAPKThermalMeterIgnore in struct hal_data_8188e is never read and can
be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove power index members of struct hal_data_8188e that are written to
but never read.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FwRsvdPageStartOffset in struct hal_data_8188e is never read. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|