aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/xilinx_uartps.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-30serial: Make ->set_termios() old ktermios constIlpo Järvinen1-1/+2
There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Check the clk_enable return valueShubhrajyoti Datta1-2/+10
Check the clk_enable return value. If clocks are not enabled the register accesses could hang the system so error out instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-8-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Add timeout waiting for loopShubhrajyoti Datta1-1/+13
There is a potential infinite loop while waiting for the the TXFULL to deassert. Adds the error message and timeout to avoid infinite loop if it fails to get the TX fifo not full. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-7-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Prevent writes when the controller is disabledShubhrajyoti Datta1-0/+15
Prevent writing to the fifo if the controller is disabled. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-6-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Fix the ignore_statusShubhrajyoti Datta1-0/+2
Currently the ignore_status is not considered in the isr. Add a check to add the ignore_status. Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-5-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Initialise the read_status_maskShubhrajyoti Datta1-0/+2
Initialise the read status in probe. It will be checked in the isr so to have the default values lets initialise in probe. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-4-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Update copyright text to correct formatMichal Simek1-1/+1
Based on recommended guidance Copyright term should be also present in front of (c). That's why aligned drivers to match this pattern. It helps automated tools with source code scanning. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-3-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: xilinx_uartps: Check clk_enable return valueShubhrajyoti Datta1-2/+10
If clocks are not enabled the register access may hang the system. Check for the clock enable return value and bail out if not enabled. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220729114748.18332-2-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: xilinx_uartps: cache xmit in cdns_uart_handle_tx()Jiri Slaby1-10/+7
Cache port->state->xmit into a local variable (xmit) in cdns_uart_handle_tx(). This reduces length of some lines there significantly. I.e. makes the code more readable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: xilinx_uartps: return early in cdns_uart_handle_tx()Jiri Slaby1-29/+18
Return from the true branch of the 'if'. This saves one indentation level and makes the code more readable. The two comments about what obvious code does are removed too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03serial: make uart_console_write->putchar()'s character an unsigned charJiri Slaby1-1/+1
Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil <paul@crapouillou.net> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@orcam.me.uk> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Karol Gugala <kgugala@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> [atmel_serial] Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson_serial Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26serial: xilinx_uartps: Fix race condition causing stuck TXAnssi Hannula1-1/+2
xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid any previous TXEVENT event asserting the UART interrupt. This clear operation is done immediately after filling the TX FIFO. However, if the bytes inserted by cdns_uart_handle_tx() are consumed by the UART before the TXEMPTY is cleared, the clear operation eats the new TXEMPTY event as well, causing cdns_uart_isr() to never receive the TXEMPTY event. If there are bytes still queued in circbuf, TX will get stuck as they will never get transferred to FIFO (unless new bytes are queued to circbuf in which case .start_tx() is called again). While the racy missed TXEMPTY occurs fairly often with short data sequences (e.g. write 1 byte), in those cases circbuf is usually empty so no action on TXEMPTY would have been needed anyway. On the other hand, longer data sequences make the race much more unlikely as UART takes longer to consume the TX FIFO. Therefore it is rare for this race to cause visible issues in general. Fix the race by clearing the TXEMPTY bit in ISR *before* filling the FIFO. The TXEMPTY bit in ISR will only get asserted at the exact moment the TX FIFO *becomes* empty, so clearing the bit before filling FIFO does not cause an extra immediate assertion even if the FIFO is initially empty. This is hard to reproduce directly on a normal system, but inserting e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud, and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50" reliably reproduces the issue on my ZynqMP test system unless this fix is applied. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24serial: Prefer unsigned int to bare use of unsignedJinchao Wang1-1/+1
Fix checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Jinchao Wang <wjc@cdjrlc.com> Link: https://lore.kernel.org/r/20210624021207.58059-1-wjc@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-20tty: serial: xilinx_uartps: Fix documentation for cdns_uart_clk_notifier_cb()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/xilinx_uartps.c:496: warning: expecting prototype for cdns_uart_clk_notitifer_cb(). Prototype was for cdns_uart_clk_notifier_cb() instead Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210520121906.3468725-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-20serial: drop irq-flags initialisationsJohan Hovold1-4/+4
There's no need to initialise irq-flags variables before saving the interrupt state. Drop the redundant initialisations from drivers that got this wrong. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210519092541.10137-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22serial: xilinx_uartps: drop low-latency workaroundJohan Hovold1-2/+1
Commit c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") reworked the driver interrupt processing but also, without comment, added an unnecessary workaround for the infamous low_latency behaviour of tty_flip_buffer_push() which had been removed years before. Specifically, since commit a9c3f68f3cd8 ("tty: Fix low_latency BUG"), tty_flip_buffer_push() always schedules a work item to push data to the line discipline and there's no need to keep any low_latency hacks around. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210421095509.3024-27-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: xilinx_uartps: Supply description for missing member 'cts_override'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/xilinx_uartps.c:205: warning: Function parameter or member 'cts_override' not described in 'cdns_uart' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-23-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-21tty: xilinx_uartps: Really fix id assignmentHelmut Grohne1-2/+6
The problems started with the revert (18cc7ac8a28e28). The cdns_uart_console.index is statically assigned -1. When the port is registered, Linux assigns consecutive numbers to it. It turned out that when using ttyPS1 as console, the index is not updated as we are reusing the same cdns_uart_console instance for multiple ports. When registering ttyPS0, it gets updated from -1 to 0, but when registering ttyPS1, it already is 0 and not updated. That led to 2ae11c46d5fdc4. It assigns the index prior to registering the uart_driver once. Unfortunately, that ended up breaking the situation where the probe order does not match the id order. When using the same device tree for both uboot and linux, it is important that the serial0 alias points to the console. So some boards reverse those aliases. This was reported by Jan Kiszka. The proposed fix was reverting the index assignment and going back to the previous iteration. However such a reversed assignement (serial0 -> uart1, serial1 -> uart0) was already partially broken by the revert (18cc7ac8a28e28). While the ttyPS device works, the kmsg connection is already broken and kernel messages go missing. Reverting the id assignment does not fix this. >From the xilinx_uartps driver pov (after reverting the refactoring commits), there can be only one console. This manifests in static variables console_pprt and cdns_uart_console. These variables are not properly linked and can go out of sync. The cdns_uart_console.index is important for uart_add_one_port. We call that function for each port - one of which hopefully is the console. If it isn't, the CON_ENABLED flag is not set and console_port is cleared. The next cdns_uart_probe call then tries to register the next port using that same cdns_uart_console. It is important that console_port and cdns_uart_console (and its index in particular) stay in sync. The index assignment implemented by Shubhrajyoti Datta is correct in principle. It just may have to happen a second time if the first cdns_uart_probe call didn't encounter the console device. And we shouldn't change the index once the console uart is registered. Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Link: https://lore.kernel.org/linux-serial/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com/ Fixes: 18cc7ac8a28e28 ("Revert "serial: uartps: Register own uart console and driver structures"") Fixes: 2ae11c46d5fdc4 ("tty: xilinx_uartps: Fix missing id assignment to the console") Fixes: 76ed2e10579671 ("Revert "tty: xilinx_uartps: Fix missing id assignment to the console"") Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200713073227.GA3805@laureti-dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-27Revert "tty: xilinx_uartps: Fix missing id assignment to the console"Jan Kiszka1-1/+0
This reverts commit 2ae11c46d5fdc46cb396e35911c713d271056d35. It turned out to break the ultra96-rev1, e.g., which uses uart1 as serial0 (and stdout-path = "serial0:115200n8"). Fixes: 2ae11c46d5fd ("tty: xilinx_uartps: Fix missing id assignment to the console") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-11Merge 5.7-rc5 into tty-nextGreg Kroah-Hartman1-0/+1
We need the tty fixes in here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-04tty: xilinx_uartps: Fix missing id assignment to the consoleShubhrajyoti Datta1-0/+1
When serial console has been assigned to ttyPS1 (which is serial1 alias) console index is not updated property and pointing to index -1 (statically initialized) which ends up in situation where nothing has been printed on the port. The commit 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") didn't contain this line which was removed by accident. Fixes: 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27Merge 5.7-rc3 into tty-nextGreg Kroah-Hartman1-162/+49
We need the tty/serial fixes in here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16serial: uartps: Use cdns_uart_tx_empty in console_writeRaviteja Narayanam1-3/+1
Instead of accessing the registers and checking for tx_empty, use cdns_uart_tx_empty in cdns_uart_console_write function. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1586413563-29125-3-git-send-email-raviteja.narayanam@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16serial: uartps: Wait for tx_empty in console setupRaviteja Narayanam1-0/+8
On some platforms, the log is corrupted while console is being registered. It is observed that when set_termios is called, there are still some bytes in the FIFO to be transmitted. So, wait for tx_empty inside cdns_uart_console_setup before calling set_termios. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Register own uart console and driver structures"Michal Simek1-55/+40
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Move Port ID to device data structure"Michal Simek1-11/+9
This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Change uart ID port allocation"Michal Simek1-98/+13
This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade. With setting up NR_PORTS to 16 to be able to use serial2 and higher aliases and don't loose functionality which was intended by these changes. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"Michal Simek1-4/+2
This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Fix error path when alloc failed"Michal Simek1-4/+2
This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Use the same dynamic major number for all ports"Michal Simek1-3/+2
This reverts commit ab262666018de6f4e206b021386b93ed0c164316. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16Revert "serial: uartps: Fix uartps_major handling"Michal Simek1-7/+1
This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: uartps: Add TACTIVE check in cdns_uart_tx_empty functionRaviteja Narayanam1-2/+2
Make sure that all bytes are transmitted out of Uart by monitoring CDNS_UART_SR_TACTIVE bit as well. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Maarten Brock <m.brock@vanmierlo.com> Link: https://lore.kernel.org/r/e2514818af5973be291cc117d07739f068b71639.1584610774.git.shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24serial: uartps: Remove unconditional wait inside set_termiosRaviteja Narayanam1-14/+2
set_termios function should not wait for the transmit FIFO empty (CDNS_UART_SR_TXEMPTY) unconditionally. The tty layer takes care of it based on the parameter passed (TCSANOW/TCSADRAIN/TCSAFLUSH). Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/536e190dd5bbb474007a67e6323c048288942a28.1584610774.git.shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: set_mctrl sets RTS and DTRMaarten Brock1-0/+4
set_mctrl now sets RTS and DTR. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-3-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: set_termios sets flowcontrolMaarten Brock1-5/+9
Let set_termios enable/disable automatic flow control. set_mctrl should not touch automatic flow control. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-2-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: Let get_mctrl return statusMaarten Brock1-3/+25
Some of the applications like microcom do not work if modem is disabled. To fix them we always return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR instead of 0 when using cts_override. Make get_mctrl return actual status when not using cts_override. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-1-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18tty/serial: Migrate xilinx_uartps to use has_sysrqDmitry Safonov1-4/+1
The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20191213000657.931618-53-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartps: Fix uartps_major handlingMichal Simek1-1/+7
There are two parts which should be fixed. The first one is to assigned uartps_major at the end of probe() to avoid complicated logic when something fails. The second part is initialized uartps_major number to 0 when last device is removed. This will ensure that on next probe driver will ask for new dynamic major number. Fixes: ab262666018d ("serial: uartps: Use the same dynamic major number for all ports") Reported-by: Paul Thomas <pthomas8589@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d2652cda992833315c4f96f06953eb547f928918.1570194248.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04xilinx_uartps.c: suppress "may be used uninitialised" warningStephen Rothwell1-1/+1
A powerpc allyesconfig build produces this warning: In file included from include/linux/radix-tree.h:16, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/device.h:16, from include/linux/platform_device.h:13, from drivers/tty/serial/xilinx_uartps.c:16: drivers/tty/serial/xilinx_uartps.c: In function 'cdns_uart_console_write': include/linux/spinlock.h:288:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] _raw_spin_unlock_irqrestore(lock, flags); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/tty/serial/xilinx_uartps.c:1197:16: note: 'flags' was declared here unsigned long flags; ^~~~~ It looks like gcc just can't track the relationship between "locked" and "flags", and it is obvious that "flags" won't be used when "locked" is zero, so the simplest thing is to initialise flags. Cc: Jiri Slaby <jslaby@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20190731160557.6a09c3e1@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Remove useless return from cdns_uart_poll_put_charNava kishore Manne1-2/+0
There is no reason to call return at the end of function which should return void. The patch is also remove one checkpatch warning: WARNING: void function return statements are not generally useful + return; +} Fixes: 6ee04c6c5488 ("tty: xuartps: Add polled mode support for xuartps") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Do not add a trailing semicolon to macroNava kishore Manne1-1/+1
This patch fixes this checkpatch warning: WARNING: macros should not use a trailing semicolon +#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \ + clk_rate_change_nb); Fixes: d9bb3fb12685 ("tty: xuartps: Rebrand driver as Cadence UART") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Fix long line over 80 charsNava kishore Manne1-1/+2
Trivial patch which fixes one checkpatch warning: WARNING: line over 80 characters + !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) { Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Fix multiple line dereferenceNava kishore Manne1-2/+2
Trivial patch which fixes this checkpatch warning: WARNING: Avoid multiple line dereference - prefer 'port->state->xmit.tail' + port->state->xmit.buf[port->state->xmit. + tail], port->membase + CDNS_UART_FIFO); Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Use octal permission for module_param()Nava kishore Manne1-2/+2
Octal permission is preffered compare to symbolic one. This patch fixes checkpatch warnings: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Use the same dynamic major number for all portsShubhrajyoti Datta1-2/+3
Let kernel to find out major number dynamically for the first device and then reuse it for other instances. This fixes the issue that each uart is registered with a different major number. After the patch: crw------- 1 root root 253, 0 Jun 10 08:31 /dev/ttyPS0 crw--w---- 1 root root 253, 1 Jan 1 1970 /dev/ttyPS1 Fixes: 024ca329bfb9 ("serial: uartps: Register own uart console and driver structures") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10serial: uartps: Add a timeout to the tx empty waitShubhrajyoti Datta1-4/+10
In case the cable is not connected then the target gets into an infinite wait for tx empty. Add a timeout to the tx empty wait. Reported-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10serial: uartps: Move the spinlock after the read of the tx emptyShubhrajyoti Datta1-2/+1
Currently we are doing a read of the status register. Move the spinlock after that as the reads need not be spinlock protected. This patch prevents relaxing the cpu with spinlock held. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29serial: uartps: Add support for cts-overrideShubhrajyoti Datta1-0/+12
Having flow is configurable. Add support for the same by checking for cts-override. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01tty: xilinx_uartps: Correct return value in probeRajan Vaja1-13/+19
Existing driver checks for alternate clock if devm_clk_get() fails and returns error code for last clock failure. If xilinx_uartps is called before clock driver, devm_clk_get() returns -EPROBE_DEFER. In this case, probe should not check for alternate clock as main clock is already present in DTS and return -EPROBE_DEFER only. This patch fixes it by not checking for alternate clock when main clock get returns -EPROBE_DEFER. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.