aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/otg/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18usb: phy: move all PHY drivers to drivers/usb/phy/Felipe Balbi1-21/+0
that's a much more reasonable location for those drivers. It helps us saving drivers/usb/otg/ for when we actually start adding generic OTG code. Also completely delete drivers/usb/otg/ as there's nothing left there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: otg: move usb_otg_state_string to usb-common.cFelipe Balbi1-3/+0
otg.c only had a single function definition which might make more sense to be placed in usb-common.c. While doing that, we also delete otg.c since it's now empty. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-09usb: otg: add basic mxs phy driver supportRichard Zhao1-0/+1
mxs phy is used in Freescale i.MX SoCs, for example imx23, imx28, imx6Q. This patch adds the basic host support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peter Chen <peter.chen@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-24usb: otg: kill langwell_otg driverAlexander Shishkin1-1/+0
The way this driver was added by f0ae849 (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20USB: OTG: add Marvell usb OTG driver supportNeil Zhang1-0/+1
This driver is for ChipIdea USB OTG controller on Marvell Socs. PXA9xx/MMP2/MMP3/MGx all have this USB OTG controller. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-02USB: add Freescale USB OTG Transceiver driverLi Yang1-0/+2
Slightly reworked and cleaned up driver from Freescale LTIB for MPC5121E. The driver has been ported to the current kernel, proc interface "/proc/driver/fsl_usb2_otg" has been replaced by sysfs interface. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11usb: otg: Add ulpi viewport access opsBenoit Goby1-0/+1
Add generic access ops for controllers with a ulpi viewport register (e.g. Chipidea/ARC based controllers). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07USB: Rename "msm72k_otg.c" to "msm_otg.c"Pavankumar Kondeti1-1/+1
This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musbGreg Kroah-Hartman1-0/+1
* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits) usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource arm: OMAP4430: musb: Configure musb to OTG mode usb: musb: Adding musb support for OMAP4430 usb: otg: TWL6030: Add twl6030_usb file for compilation mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 mfd: TWL6030: USBOTG VBUS event generation on usb: musb: add support for ux500 platform musb: am35x: fix compile error due to control apis arm: omap4: enable usb on 4430sdp usb: musb: drop board_set_vbus usb: musb: drop musb_platform_suspend/resume usb: musb: blackfin: usb dev_pm_ops structure usb: musb: am35x: usb dev_pm_ops structure usb: musb: omap2430: use dev_pm_ops structure usb: musb: omap2430: drop the nops usb: musb: mark musb_save/restore_context static ...
2010-12-10usb: add ab8500 usb transceiver driverMian Yousaf Kaukab1-0/+1
Basic driver for ab8500 usb otg transceiver TODO: -Regulators support -Host and OTG testing -Interface with PRCMU -Charging support Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10USB: Add MSM OTG Controller driverPavankumar Kondeti1-0/+1
This driver implements PHY initialization, clock management, ULPI IO ops and simple OTG state machine to kick host/peripheral based on Id/VBUS line status. VBUS/Id lines are tied to a reference voltage on some boards. Hence provide debugfs interface to select host/peripheral mode. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10usb: otg: TWL6030: Add twl6030_usb file for compilationHema HK1-0/+1
Add the twl6030_usb transceiver file for compilation. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22usb: makefile cleanupmatt mooney1-4/+3
For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: Add Intel Langwell USB OTG Transceiver DriverHao Wu1-0/+1
This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB OTG: Add generic driver for ULPI OTG transceiverDaniel Mack1-0/+1
This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12Revert "USB: Add Intel Langwell USB OTG Transceiver Drive"Greg Kroah-Hartman1-1/+0
This reverts commit 453f77558810ffa669ed5a510a7173ec49def396. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add Intel Langwell USB OTG Transceiver DriveHao Wu1-0/+1
Description: This driver is used for Intel Langwell* USB OTG controller in Intel Moorestown* platform. It tries to implement host/device role switch according to OTG spec. The actual hsot and device functions are accomplished in modified EHCI driver and Intel Langwell USB OTG client controller driver. * Langwell and Moorestown are names used in development. They are not approved official name. Note: This patch is the first version Intel Langwell USB OTG Transceiver driver. The development is not finished, and the bug fixing is on going for some hardware and software issues. The main purpose of this submission is for code view. Supported features: - Data-line Pulsing SRP - Support HNP to switch roles - PCI D0/D3 power management support Known issues: - HNP is only tested with another Moorestown platform. - PCI D0/D3 power management support is not fully tested. - VBus Pulsing SRP is not support in current version. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: otg: adding nop usb transceiverAjay Kumar Gupta1-0/+1
NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: otg: twl4030 transceiver driverDavid Brownell1-0/+1
Add driver for the high speed USB-OTG transceiver in TI's TWL4030 family of chips. Given this and various other pending patches, OMAP3 hardware like that from beagleboard.org, gumstix.com (Overo), and openpandora.org should now have basic USB host and peripheral connectivity with mainline kernels. Ditto for less widely-available boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: otg: sharable otg transceiver opsTony Lindgren1-5/+6
Move otg_get/set/put_transceiver() from omap specific code to common otg.c so other upcoming drivers can share them. [ dbrownell@users.sourceforge.net: move to drivers/usb/otg, dox ] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: otg: gpio_vbus transceiver stubPhilipp Zabel1-0/+5
gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: move isp1301_omap to drivers/usb/otgDavid Brownell1-0/+8
This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.