aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-04-06s2io: convert to set_phys_id (v2)stephen hemminger2-48/+41
Convert to new ethtool set physical id model. Remove no longer used timer, and fix docbook comment. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06niu: convert to new ethtool set_phys_idstephen hemminger2-13/+17
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06pcnet32: convert to set_phys_idstephen hemminger1-46/+28
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06benet: convert to set_phys_idstephen hemminger2-17/+22
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2x: convert to set_phys_idstephen hemminger1-21/+23
Also cleanup error codes to no lie about things that driver doesn't support. If device is down report -EAGAIN (same as Broadcom), and if port doesn't blink then error as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2: convert to set_phys_idstephen hemminger2-29/+28
In this case, need to add element to device private to hold original led state. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06vxge: convert to set_phys_idstephen hemminger1-9/+16
Also fix up incorrect docbook comment Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06cxgb3: implement set_phys_idstephen hemminger1-11/+14
Implement new ethtool set_phys_id on Chelsio cxgb3 board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: implement ethtool set_phys_idstephen hemminger1-20/+23
Implement control of LED via set_phys_id. Note: since PHY is powered off if device is down, this board only allows blinking if device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06skge: implement set_phys_idstephen hemminger1-17/+16
Implement set_phys_id led control on SysKonnect board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06sky2: support ethtool set_phys_idstephen hemminger1-12/+13
Use ethtool set_phys_id to control LED. Fixes issues with RTNL being held for extended periods. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Update version number to 5.0.16Anirban Chakraborty1-2/+2
Bumped up version number to 5.0.16 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Fix LRO disableRajesh Borundia3-11/+24
o In dev->open LRO was enabled by default, enable it depending upon netdev->features , kernel may have disabled it. o Configure LRO when interface is up. Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Use flt method to determine flash fw regionSritej Velaga2-4/+16
Use flash layout table to get flash fw starting address and its size. If that fails, use legacy method. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Remove unused codeAnirban Chakraborty4-81/+46
Cleaned up unused codes for interrupt coalescence settings Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Changes to VLAN codeAnirban Chakraborty3-26/+35
Made changes to VLAN code comply with new VLAN infrastructure in kernel Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Code optimization patchAnirban Chakraborty2-125/+115
Optimized code resulted in achieving lower CPU utilization on transmit path and higher throughput for small packet sizes (64 bytes). Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Cleanup patchAnirban Chakraborty6-273/+268
1. Changed adapter structure to move away from embedding hardware and receive context structs and use pointers to those objects 2. Packed all the structs that interface with FW 3. Removed unused code and structs Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Memory leak fixSony Chacko1-2/+4
Fix a memory leak in error path of pci info. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Make PCI info available in all modesSony Chacko1-3/+3
Before this fix, PCI info was available only when multiple NIC functions are present on the same port. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6David S. Miller5-97/+40
2011-04-06tg3: Support 4mb flash sizes for 5717 and 5719Matt Carlson1-1/+5
If a 5717 or 5719 NVRAM part is manually strapped and is 2mb in size, the driver needs to look at the NVRAM size field rather than infer it from the strapping itself. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Enable 5720 supportMatt Carlson1-0/+1
This patch adds the 5720 device ID to the PCI table, thus enabling 5720 support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 PHY IDMatt Carlson2-0/+2
This patch adds the 5720 PHY ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 H2BMC supportMatt Carlson2-15/+53
This patch adds support for the new Host to BMC feature. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 NVRAM decodingMatt Carlson2-1/+152
The 5720 implements its own NVRAM pin strapping scheme. This patch adds the required support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 ASIC revMatt Carlson2-8/+27
This patch adds support for the 5720 ASIC rev. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Reintroduce 5717_PLUSMatt Carlson2-24/+17
This patch reintroduces the TG3_FLG3_5717_PLUS to identify 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: 5717_PLUS => 57765_PLUSMatt Carlson2-22/+22
The 57765 arrived before the 5717 and has a subset of the features supported by the 5717. This patch renames the 5717_PLUS flag so that it can be reintroduced to designate only 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Cleanup extended rx ring size codeMatt Carlson2-21/+27
Hardcoded values are used in multiple places to describe the maximum rx ring sizes. This patch replaces those values with preprocessor constants. This patch also introduces a new TG3_FLG3_LRG_PROD_RING_CAP to determine if the device is capable of supporting larger ring sizes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_idBen Hutchings1-10/+18
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05sfc: Implement generic features interfaceBen Hutchings4-84/+18
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05sfc: Enable all TSO features on VLANsBen Hutchings1-1/+1
The TSO code already supports IPv6 on VLAN, so enable it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-04net: Allow no-cache copy from user on transmitTom Herbert1-1/+1
This patch uses __copy_from_user_nocache on transmit to bypass data cache for a performance improvement. skb_add_data_nocache and skb_copy_to_page_nocache can be called by sendmsg functions to use this feature, initial support is in tcp_sendmsg. This functionality is configurable per device using ethtool. Presumably, this feature would only be useful when the driver does not touch the data. The feature is turned on by default if a device indicates that it does some form of checksum offload; it is off by default for devices that do no checksum offload or indicate no checksum is necessary. For the former case copy-checksum is probably done anyway, in the latter case the device is likely loopback in which case the no cache copy is probably not beneficial. This patch was tested using 200 instances of netperf TCP_RR with 1400 byte request and one byte reply. Platform is 16 core AMD x86. No-cache copy disabled: 672703 tps, 97.13% utilization 50/90/99% latency:244.31 484.205 1028.41 No-cache copy enabled: 702113 tps, 96.16% utilization, 50/90/99% latency 238.56 467.56 956.955 Using 14000 byte request and response sizes demonstrate the effects more dramatically: No-cache copy disabled: 79571 tps, 34.34 %utlization 50/90/95% latency 1584.46 2319.59 5001.76 No-cache copy enabled: 83856 tps, 34.81% utilization 50/90/95% latency 2508.42 2622.62 2735.88 Note especially the effect on latency tail (95th percentile). This seems to provide a nice performance improvement and is consistent in the tests I ran. Presumably, this would provide the greatest benfits in the presence of an application workload stressing the cache and a lot of transmit data happening. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04xen: netfront: assume all hw features are available until backend connection setupIan Campbell1-0/+8
We need to assume that all features will be available when registering the netdev otherwise they are ommitted from the initial set of dev->wanted_features. When we connect to the backed we reduce the set as necessary due to the call to netdev_update_features() in xennet_connect(). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller22-30/+68
2011-04-03mISDN: fix "persistant" typoJan Engelhardt1-10/+10
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-03mlx4: fix kfree on error path in new_steering_entry()Mariusz Kozlowski1-2/+2
On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-03xen: netfront: fix declaration orderEric Dumazet1-36/+36
Must declare xennet_fix_features() and xennet_set_features() before using them. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01net: convert sunhme/sungem network drivers to hw_featuresMichał Mirosław2-3/+6
Side effects: - TX offloads (HW csum, scatter-gather) can be toggled now - RX checksum is reported correctly now (it's always active) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01veth: convert to hw_featuresMichał Mirosław1-40/+5
This should probably get TSO available as it's basically a loopback device. Offloads are left disabled by default - as before. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01jme: convert offload constraints to ndo_fix_featuresMichał Mirosław2-60/+19
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01net: convert xen-netfront to hw_featuresMichał Mirosław1-34/+23
Not tested in any way. The original code for offload setting seems broken as it resets the features on every netback reconnect. This will set GSO_ROBUST at device creation time (earlier than connect time). RX checksum offload is forced on - so advertise as it is. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01net: convert SMSC USB net drivers to hw_featuresMichał Mirosław2-144/+63
There's a race (not fixed here) in smsc75xx in setting RFE_CTL that's not properly handled via rfe_ctl_lock. Spinlock is not a good tool here, as this has to wait for URB completion (or maybe just submission) after issuing register write request. Otherwise, the rfe_ctl might be changed just after spin_unlock() and device left programmed with other value. smsc95xx has increased hard_header_len for the case of TX checksumming. smsc75xx is fixed to advertise IP+IPV6_CSUM instead of HW_CSUM as it does not use csum_start/csum_offset. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01virtio_net: convert to hw_featuresMichał Mirosław1-27/+19
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01usbnet: use eth%d name for known ethernet devicesArnd Bergmann10-12/+21
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01starfire: clean up dma_addr_t size testFUJITA Tomonori1-5/+1
Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6David S. Miller8-8/+38
2011-04-01sfc: Move test of rx_checksum_enabled from nic.c to rx.cBen Hutchings2-4/+5
This is preparation for using the generic netdev features interface, and should have no effect in itself. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-03-31bnx2x, cnic: Disable iSCSI if DCBX negotiation is successfulDmitry Kravkov6-23/+83
With current bnx2x firmware 6.2.9, iSCSI is not supported in DCB network, so we need to disable it. Add cnic command to disconnect iSCSI connections and prevent future connections when DCBX negotiation succeeds. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.