aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-02s390: ap: implement PAPQ AQIC interception in kernelPierre Morel3-7/+375
We register a AP PQAP instruction hook during the open of the mediated device. And unregister it on release. During the probe of the AP device, we allocate a vfio_ap_queue structure to keep track of the information we need for the PQAP/AQIC instruction interception. In the AP PQAP instruction hook, if we receive a demand to enable IRQs, - we retrieve the vfio_ap_queue based on the APQN we receive in REG1, - we retrieve the page of the guest address, (NIB), from register REG2 - we retrieve the mediated device to use the VFIO pinning infrastructure to pin the page of the guest address, - we retrieve the pointer to KVM to register the guest ISC and retrieve the host ISC - finaly we activate GISA If we receive a demand to disable IRQs, - we deactivate GISA - unregister from the GIB - unpin the NIB When removing the AP device from the driver the device is reseted and this process unregisters the GISA from the GIB, and unpins the NIB address then we free the vfio_ap_queue structure. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02vfio: ap: register IOMMU VFIO notifierPierre Morel2-1/+44
To be able to use the VFIO interface to facilitate the mediated device memory pinning/unpinning we need to register a notifier for IOMMU. While we will start to pin one guest page for the interrupt indicator byte, this is still ok with ballooning as this page will never be used by the guest virtio-balloon driver. So the pinned page will never be freed. And even a broken guest does so, that would not impact the host as the original page is still in control by vfio. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390: ap: kvm: add PQAP interception for AQICPierre Morel1-0/+2
We prepare the interception of the PQAP/AQIC instruction for the case the AQIC facility is enabled in the guest. First of all we do not want to change existing behavior when intercepting AP instructions without the SIE allowing the guest to use AP instructions. In this patch we only handle the AQIC interception allowed by facility 65 which will be enabled when the complete interception infrastructure will be present. We add a callback inside the KVM arch structure for s390 for a VFIO driver to handle a specific response to the PQAP instruction with the AQIC command and only this command. But we want to be able to return a correct answer to the guest even there is no VFIO AP driver in the kernel. Therefor, we inject the correct exceptions from inside KVM for the case the callback is not initialized, which happens when the vfio_ap driver is not loaded. We do consider the responsibility of the driver to always initialize the PQAP callback if it defines queues by initializing the CRYCB for a guest. If the callback has been setup we call it. If not we setup an answer considering that no queue is available for the guest when no callback has been setup. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/qdio: don't touch the dsci in tiqdio_add_input_queues()Julian Wiedmann1-1/+0
Current code sets the dsci to 0x00000080. Which doesn't make any sense, as the indicator area is located in the _left-most_ byte. Worse: if the dsci is the _shared_ indicator, this potentially clears the indication of activity for a _different_ device. tiqdio_thinint_handler() will then have no reason to call that device's IRQ handler, and the device ends up stalling. Fixes: d0c9d4a89fff ("[S390] qdio: set correct bit in dsci") Cc: <stable@vger.kernel.org> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/qdio: (re-)initialize tiqdio list entriesJulian Wiedmann2-2/+4
When tiqdio_remove_input_queues() removes a queue from the tiq_list as part of qdio_shutdown(), it doesn't re-initialize the queue's list entry and the prev/next pointers go stale. If a subsequent qdio_establish() fails while sending the ESTABLISH cmd, it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and tiqdio_remove_input_queues() will attempt to remove the queue entry a second time. This dereferences the stale pointers, and bad things ensue. Fix this by re-initializing the list entry after removing it from the list. For good practice also initialize the list entry when the queue is first allocated, and remove the quirky checks that papered over this omission. Note that prior to commit e521813468f7 ("s390/qdio: fix access to uninitialized qdio_q fields"), these checks were bogus anyway. setup_queues_misc() clears the whole queue struct, and thus needs to re-init the prev/next pointers as well. Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.") Cc: <stable@vger.kernel.org> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/dasd: Fix a precision vs width bug in dasd_feature_list()Dan Carpenter1-1/+1
The "len" variable is the length of the option up to the next option or to the end of the string which ever first. We want to print the invalid option so we want precision "%.*s" but the format is width "%*s" so it prints up to the end of the string. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/cio: introduce driver_override on the css busCornelia Huck2-0/+54
Sometimes, we want to control which of the matching drivers binds to a subchannel device (e.g. for subchannels we want to handle via vfio-ccw). For pci devices, a mechanism to do so has been introduced in 782a985d7af2 ("PCI: Introduce new device binding path using pci_dev.driver_override"). It makes sense to introduce the driver_override attribute for subchannel devices as well, so that we can easily extend the 'driverctl' tool (which makes use of the driver_override attribute for pci). Note that unlike pci we still require a driver override to match the subchannel type; matching more than one subchannel type is probably not useful anyway. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-24vfio-ccw: make convert_ccw0_to_ccw1 staticCornelia Huck1-1/+1
Reported by sparse. Fixes: 7f8e89a8f2fd ("vfio-ccw: Factor out the ccw0-to-ccw1 transition") Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190624090721.16241-1-cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-24Merge tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into featuresVasily Gorbik3-278/+151
Refactoring of the vfio-ccw cp handling, simplifying the code and avoiding unneeded allocating/copying. * tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw: vfio-ccw: Remove copy_ccw_from_iova() vfio-ccw: Factor out the ccw0-to-ccw1 transition vfio-ccw: Copy CCW data outside length calculation vfio-ccw: Skip second copy of guest cp to host vfio-ccw: Move guest_cp storage into common struct s390/cio: Combine direct and indirect CCW paths vfio-ccw: Rearrange IDAL allocation in direct CCW vfio-ccw: Remove pfn_array_table vfio-ccw: Adjust the first IDAW outside of the nested loops vfio-ccw: Rearrange pfn_array and pfn_array_table arrays s390/cio: Use generalized CCW handler in cp_init() s390/cio: Generalize the TIC handler s390/cio: Refactor the routine that handles TIC CCWs s390/cio: Squash cp_free() and cp_unpin_free() Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-21vfio-ccw: Remove copy_ccw_from_iova()Eric Farman1-12/+2
Just to keep things tidy. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190618202352.39702-6-farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-21vfio-ccw: Factor out the ccw0-to-ccw1 transitionEric Farman1-23/+25
This is a really useful function, but it's buried in the copy_ccw_from_iova() routine so that ccwchain_calc_length() can just work with Format-1 CCWs while doing its counting. But it means we're translating a full 2K of "CCWs" to Format-1, when in reality there's probably far fewer in that space. Let's factor it out, so maybe we can do something with it later. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190618202352.39702-5-farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-21vfio-ccw: Copy CCW data outside length calculationEric Farman1-12/+7
It doesn't make much sense to "hide" the copy to the channel_program struct inside a routine that calculates the length of the chain. Let's move it to the calling routine, which will later copy from channel_program to the memory it allocated itself. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190618202352.39702-4-farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-21vfio-ccw: Skip second copy of guest cp to hostEric Farman1-7/+3
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory to the host space anchored off vfio_ccw_private. There's no need to do that again once we have the length calculated, when we could just copy the section we need to the "permanent" space for the I/O. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190618202352.39702-3-farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-21vfio-ccw: Move guest_cp storage into common structEric Farman3-19/+18
Rather than allocating/freeing a piece of memory every time we try to figure out how long a CCW chain is, let's use a piece of memory allocated for each device. The io_mutex added with commit 4f76617378ee9 ("vfio-ccw: protect the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ event that accesses/uses this space, so there should be no race concerns with another CPU attempting an (unexpected) SSCH for the same device. Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190618202352.39702-2-farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-19s390/cio: move struct node_descriptor to cio.hJulian Wiedmann1-30/+0
This allows device drivers (eg. qeth) to use the struct when processing information retrieved via RCD. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-19s390/sclp: remove call home supportHeiko Carstens3-211/+0
This feature has never been used, so remove it. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-17s390/cio: Combine direct and indirect CCW pathsEric Farman1-76/+39
With both the direct-addressed and indirect-addressed CCW paths simplified to this point, the amount of shared code between them is (hopefully) more easily visible. Move the processing of IDA-specific bits into the direct-addressed path, and add some useful commentary of what the individual pieces are doing. This allows us to remove the entire ccwchain_fetch_idal() routine and maintain a single function for any non-TIC CCW. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-10-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17vfio-ccw: Rearrange IDAL allocation in direct CCWEric Farman1-10/+15
This is purely deck furniture, to help understand the merge of the direct and indirect handlers. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-9-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17vfio-ccw: Remove pfn_array_tableEric Farman1-85/+33
Now that both CCW codepaths build this nested array: ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages] We can collapse this into simply: ccwchain->pfn_array[#idaws/#pages] Let's do that, so that we don't have to continually navigate two nested arrays when the first array always has a count of one. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-8-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17vfio-ccw: Adjust the first IDAW outside of the nested loopsEric Farman1-2/+3
Now that pfn_array_table[] is always an array of 1, it seems silly to check for the very first entry in an array in the middle of two nested loops, since we know it'll only ever happen once. Let's move this outside the loops to simplify things, even though the "k" variable is still necessary. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-7-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17vfio-ccw: Rearrange pfn_array and pfn_array_table arraysEric Farman1-15/+11
While processing a channel program, we currently have two nested arrays that carry a slightly different structure. The direct CCW path creates this: ccwchain->pfn_array_table[1]->pfn_array[#pages] while an IDA CCW creates: ccwchain->pfn_array_table[#idaws]->pfn_array[1] The distinction appears to state that each pfn_array_table entry points to an array of contiguous pages, represented by a pfn_array, um, array. Since the direct-addressed scenario can ONLY represent contiguous pages, it makes the intermediate array necessary but difficult to recognize. Meanwhile, since an IDAL can contain non-contiguous pages and there is no logic in vfio-ccw to detect adjacent IDAWs, it is the second array that is necessary but appearing to be superfluous. I am not aware of any documentation that states the pfn_array[] needs to be of contiguous pages; it is just what the code does today. I don't see any reason for this either, let's just flip the IDA codepath around so that it generates: ch_pat->pfn_array_table[1]->pfn_array[#idaws] This will bring it in line with the direct-addressed codepath, so that we can understand the behavior of this memory regardless of what type of CCW is being processed. And it means the casual observer does not need to know/care whether the pfn_array[] represents contiguous pages or not. NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs, so that "#pages" == "#idaws" in this area. This means that we will have difficulty with this overlap in terminology if support for Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that this patch changes our ability to make that distinction. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-6-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17s390/cio: Use generalized CCW handler in cp_init()Eric Farman1-23/+4
It is now pretty apparent that ccwchain_handle_ccw() (nee ccwchain_handle_tic()) does everything that cp_init() wants to do. Let's remove that duplicated code from cp_init() and let ccwchain_handle_ccw() handle it itself. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-5-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17s390/cio: Generalize the TIC handlerEric Farman1-5/+6
Refactor ccwchain_handle_tic() into a routine that handles a channel program address (which itself is a CCW pointer), rather than a CCW pointer that is only a TIC CCW. This will make it easier to reuse this code for other CCW commands. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-4-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17s390/cio: Refactor the routine that handles TIC CCWsEric Farman1-4/+4
Extract the "does the target of this TIC already exist?" check from ccwchain_handle_tic(), so that it's easier to refactor that function into one that cp_init() is able to use. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-3-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-17s390/cio: Squash cp_free() and cp_unpin_free()Eric Farman1-20/+16
The routine cp_free() does nothing but call cp_unpin_free(), and while most places call cp_free() there is one caller of cp_unpin_free() used when the cp is guaranteed to have not been marked initialized. This seems like a dubious way to make a distinction, so let's combine these routines and make cp_free() do all the work. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190606202831.44135-2-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-15virtio/s390: make airq summary indicators DMAHalil Pasic1-8/+24
The hypervisor needs to interact with the summary indicators, so these need to be DMA memory as well (at least for protected virtualization guests). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: use DMA memory for ccw I/O and classic notifiersHalil Pasic1-80/+89
Before virtio-ccw could get away with not using DMA API for the pieces of memory it does ccw I/O with. With protected virtualization this has to change, since the hypervisor needs to read and sometimes also write these pieces of memory. The hypervisor is supposed to poke the classic notifiers, if these are used, out of band with regards to ccw I/O. So these need to be allocated as DMA memory (which is shared memory for protected virtualization guests). Let us factor out everything from struct virtio_ccw_device that needs to be DMA memory in a satellite that is allocated as such. Note: The control blocks of I/O instructions do not need to be shared. These are marshalled by the ultravisor. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: add indirection to indicators accessHalil Pasic1-15/+25
This will come in handy soon when we pull out the indicators from virtio_ccw_device to a memory area that is shared with the hypervisor (in particular for protected virtualization guests). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15virtio/s390: use cacheline aligned airq bit vectorsHalil Pasic1-1/+2
The flag AIRQ_IV_CACHELINE was recently added to airq_iv_create(). Let us use it! We actually wanted the vector to span a cacheline all along. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/airq: use DMA memory for adapter interruptsHalil Pasic3-14/+26
Protected virtualization guests have to use shared pages for airq notifier bit vectors, because the hypervisor needs to write these bits. Let us make sure we allocate DMA memory for the notifier bit vectors by replacing the kmem_cache with a dma_cache and kalloc() with cio_dma_zalloc(). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/cio: add basic protected virtualization supportHalil Pasic9-83/+160
As virtio-ccw devices are channel devices, we need to use the dma area within the common I/O layer for any communication with the hypervisor. Note that we do not need to use that area for control blocks directly referenced by instructions, e.g. the orb. It handles neither QDIO in the common code, nor any device type specific stuff (like channel programs constructed by the DASD driver). An interesting side effect is that virtio structures are now going to get allocated in 31 bit addressable storage. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/cio: introduce DMA pools to cioHalil Pasic1-4/+129
To support protected virtualization cio will need to make sure the memory used for communication with the hypervisor is DMA memory. Let us introduce one global pool for cio. Our DMA pools are implemented as a gen_pool backed with DMA pages. The idea is to avoid each allocation effectively wasting a page, as we typically allocate much less than PAGE_SIZE. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-15s390/pkey: Use -ENODEV instead of -EOPNOTSUPPDavid Hildenbrand1-4/+4
systemd-modules-load.service automatically tries to load the pkey module on systems that have MSA. Pkey also requires the MSA3 facility and a bunch of subfunctions. Failing with -EOPNOTSUPP makes "systemd-modules-load.service" fail on any system that does not have all needed subfunctions. For example, when running under QEMU TCG (but also on systems where protected keys are disabled via the HMC). Let's use -ENODEV, so systemd-modules-load.service properly ignores failing to load the pkey module because of missing HW functionality. While at it, also convert the -EOPNOTSUPP in pkey_clr2protkey() to -ENODEV. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-11docs: s390: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
Convert all text files with s390 documentation to ReST format. Tried to preserve as much as possible the original document format. Still, some of the files required some work in order for it to be visible on both plain text and after converted to html. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-07s390/qdio: handle PENDING state for QEBSM devicesJulian Wiedmann1-0/+1
When a CQ-enabled device uses QEBSM for SBAL state inspection, get_buf_states() can return the PENDING state for an Output Queue. get_outbound_buffer_frontier() isn't prepared for this, and any PENDING buffer will permanently stall all further completion processing on this Queue. This isn't a concern for non-QEBSM devices, as get_buf_states() for such devices will manually turn PENDING buffers into EMPTY ones. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-07s390/cio: fix kdoc for tiqdio_thinint_handlerSebastian Ott1-0/+1
Add missing parameter description to fix the following warning: drivers/s390/cio/qdio_thinint.c:183: warning: Function parameter or member 'floating' not described in 'tiqdio_thinint_handler' Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-07s390/zcrypt: support special flagged EP11 cprbsHarald Freudenberger1-0/+4
Within an EP11 cprb there exists a byte field flags. Bit 0x20 of this field indicates a special cprb. A special cprb triggers special handling in the firmware below the OS layer. However, a special cprb also needs to have the S bit in GPR0 set when NQAP is called. This was not the case for EP11 cprbs and this patch now introduces the code to support this. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-04Merge tag 'vfio-ccw-20190603' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into featuresHeiko Carstens2-46/+119
various vfio-ccw fixes (ccw translation, state machine)
2019-06-04s390/Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult3-13/+12
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-06-03s390/cio: Remove vfio-ccw checks of command codesEric Farman1-6/+5
If the CCW being processed is a No-Operation, then by definition no data is being transferred. Let's fold those checks into the normal CCW processors, rather than skipping out early. Likewise, if the CCW being processed is a "test" (a category defined here as an opcode that contains zero in the lowest four bits) then no special processing is necessary as far as vfio-ccw is concerned. These command codes have not been valid since the S/370 days, meaning they are invalid in the same way as one that ends in an eight [1] or an otherwise valid command code that is undefined for the device type in question. Considering that, let's just process "test" CCWs like any other CCW, and send everything to the hardware. [1] POPS states that a x08 is a TIC CCW, and that having any high-order bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the high-order bits are ignored. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190516161403.79053-4-farman@linux.ibm.com> Acked-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Allow zero-length CCWs in vfio-ccwEric Farman1-18/+12
It is possible that a guest might issue a CCW with a length of zero, and will expect a particular response. Consider this chain: Address Format-1 CCW -------- ----------------- 0 33110EC0 346022CC 33177468 1 33110EC8 CF200000 3318300C CCW[0] moves a little more than two pages, but also has the Suppress Length Indication (SLI) bit set to handle the expectation that considerably less data will be moved. CCW[1] also has the SLI bit set, and has a length of zero. Once vfio-ccw does its magic, the kernel issues a start subchannel on behalf of the guest with this: Address Format-1 CCW -------- ----------------- 0 021EDED0 346422CC 021F0000 1 021EDED8 CF240000 3318300C Both CCWs were converted to an IDAL and have the corresponding flags set (which is by design), but only the address of the first data address is converted to something the host is aware of. The second CCW still has the address used by the guest, which happens to be (A) (probably) an invalid address for the host, and (B) an invalid IDAW address (doubleword boundary, etc.). While the I/O fails, it doesn't fail correctly. In this example, we would receive a program check for an invalid IDAW address, instead of a unit check for an invalid command. To fix this, revert commit 4cebc5d6a6ff ("vfio: ccw: validate the count field of a ccw before pinning") and allow the individual fetch routines to process them like anything else. We'll make a slight adjustment to our allocation of the pfn_array (for direct CCWs) or IDAL (for IDAL CCWs) memory, so that we have room for at least one address even though no guest memory will be pinned and thus the IDAW will not be populated with a host address. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190516161403.79053-3-farman@linux.ibm.com> Acked-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Don't pin vfio pages for empty transfersEric Farman1-5/+50
The skip flag of a CCW offers the possibility of data not being transferred, but is only meaningful for certain commands. Specifically, it is only applicable for a read, read backward, sense, or sense ID CCW and will be ignored for any other command code (SA22-7832-11 page 15-64, and figure 15-30 on page 15-75). (A sense ID is xE4, while a sense is x04 with possible modifiers in the upper four bits. So we will cover the whole "family" of sense CCWs.) For those scenarios, since there is no requirement for the target address to be valid, we should skip the call to vfio_pin_pages() and rely on the IDAL address we have allocated/built for the channel program. The fact that the individual IDAWs within the IDAL are invalid is fine, since they aren't actually checked in these cases. Set pa_nr to zero when skipping the pfn_array_pin() call, since it is defined as the number of pages pinned and is used to determine whether to call vfio_unpin_pages() upon cleanup. The pfn_array_pin() routine returns the number of pages that were pinned, but now might be skipped for some CCWs. Thus we need to calculate the expected number of pages ourselves such that we are guaranteed to allocate a reasonable number of IDAWs, which will provide a valid address in CCW.CDA regardless of whether the IDAWs are filled in with pinned/translated addresses or not. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190516161403.79053-2-farman@linux.ibm.com> Acked-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Initialize the host addresses in pfn_arrayEric Farman1-1/+4
Let's initialize the host address to something that is invalid, rather than letting it default to zero. This just makes it easier to notice when a pin operation has failed or been skipped. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190514234248.36203-5-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Split pfn_array_alloc_pin into piecesEric Farman1-18/+46
The pfn_array_alloc_pin routine is doing too much. Today, it does the alloc of the pfn_array struct and its member arrays, builds the iova address lists out of a contiguous piece of guest memory, and asks vfio to pin the resulting pages. Let's effectively revert a significant portion of commit 5c1cfb1c3948 ("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we break pfn_array_alloc_pin() into its component pieces, and have one routine that allocates/populates the pfn_array structs, and another that actually pins the memory. In the future, we will be able to handle scenarios where pinning memory isn't actually appropriate. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190514234248.36203-4-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Set vfio-ccw FSM state before ioeventfdEric Farman1-3/+3
Otherwise, the guest can believe it's okay to start another I/O and bump into the non-idle state. This results in a cc=2 (with the asynchronous CSCH/HSCH code) returned to the guest, which is unfortunate since everything is otherwise working normally. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20190514234248.36203-3-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-03s390/cio: Update SCSW if it points to the end of the chainEric Farman1-1/+5
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an IRB generally points to 8 bytes after the last CCW that was executed (there are exceptions, but this is the most common behavior). In the case of an error, this points us to the first un-executed CCW in the chain. But in the case of normal I/O, the address points beyond the end of the chain. While the guest generally only cares about this when possibly restarting a channel program after error recovery, we should convert the address even in the good scenario so that we provide a consistent, valid, response upon I/O completion. [1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state that this is true even if the resulting address is invalid or protected, but moving to the end of the guest chain should not be a surprise. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190514234248.36203-2-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-02Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+3
Pull EFI fixes from Ingo Molnar: "Two EFI fixes: a quirk for weird systabs, plus add more robust error handling in the old 1:1 mapping code" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Allow the number of EFI configuration tables entries to be zero efi/x86/Add missing error handling to old_memmap 1:1 mapping code
2019-06-02Merge tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds3-3/+3
Pull SPDX fixes from Greg KH: "Here are just two small patches, that fix up some found SPDX identifier issues. The first patch fixes an error in a previous SPDX fixup patch, that causes build errors when doing 'make clean' on the tree (the fact that almost no one noticed it reflects the fact that kernel developers don't like doing that option very often...) The second patch fixes up a number of places in the tree where people mistyped the string "SPDX-License-Identifier". Given that people can not even type their own name all the time without mistakes, this was bound to happen, and odds are, we will have to add some type of check for this to checkpatch.pl to catch this happening in the future. Both of these have passed testing by 0-day" * tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: treewide: fix typos of SPDX-License-Identifier crypto: ux500 - fix license comment syntax error
2019-06-02Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds3-2/+3
Pull i2c fixes from Wolfram Sang: "A memleak fix for the core, two driver bugfixes, as well as fixing missing file patterns to MAINTAINERS" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add I2C DT bindings to ARM platforms MAINTAINERS: add DT bindings to i2c drivers i2c: synquacer: fix synquacer_i2c_doxfer() return value i2c: mlxcpld: Fix wrong initialization order in probe i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr
2019-06-02Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds5-22/+0
Pull thermal SoC fix from Eduardo Valentin: "A single revert, detected to cause issues on the tsens driver" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled"
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.