| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
wired through the FPGA. To ensure correct behavior, the appropriate
bit in the System Manager FPGA Interface Group register needs to be
set.
Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Junote Cai reported that he was not able to get a DSA setup involving the
Freescale DPAA/FMAN driver to work and narrowed it down to
of_find_net_device_by_node(). This function requires the network device's
device reference to be correctly set which is the case here, though we have
lost any device_node association there.
The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform
device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be
propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent
device and the of_node when dpaa_eth_add_device() creates the platform device.
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Priit reported that stmmac was crashing with the trace below. This is because
phy_attached_print() is called too early right after the PHY device has been
found, but before it has a driver attached, since that is only done in
phy_probe() which occurs later.
Fix this by dealing with a possibly NULL phydev->drv point since that can
happen here, but could also happen if we voluntarily did an unbind of the
PHY device with the PHY driver.
sun7i-dwmac 1c50000.ethernet: PTP uses main clock
sun7i-dwmac 1c50000.ethernet: no reset control found
sun7i-dwmac 1c50000.ethernet: no regulator found
sun7i-dwmac 1c50000.ethernet: Ring mode enabled
sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
sun7i-dwmac 1c50000.ethernet: Normal descriptors
libphy: stmmac: probed
Unable to handle kernel NULL pointer dereference at virtual address 00000048
pgd = c0004000
[00000048] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00318-g0065bd7fa384 #1
Hardware name: Allwinner sun7i (A20) Family
task: ee868000 task.stack: ee85c000
PC is at phy_attached_print+0x1c/0x8c
LR is at stmmac_mdio_register+0x12c/0x200
pc : [<c04510ac>] lr : [<c045e6b4>] psr: 60000013
sp : ee85ddc8 ip : 00000000 fp : c07dfb5c
r10: ee981210 r9 : 00000001 r8 : eea73000
r7 : eeaa6dd0 r6 : eeb49800 r5 : 00000000 r4 : 00000000
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eeb49800
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 4000406a DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xee85c210)
Stack: (0xee85ddc8 to 0xee85e000)
ddc0: 00000000 00000002 eeb49400 eea72000 00000000 eeb49400
dde0: c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480
de00: eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020
de20: 00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210
de40: 00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032
de60: fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8
de80: ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620
dea0: ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620
dec0: c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc
dee0: c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc
df00: ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6
df20: 00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000
df40: c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0
df60: c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006
df80: 00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000
dfa0: 00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff
[<c04510ac>] (phy_attached_print) from [<c045e6b4>] (stmmac_mdio_register+0x12c/0x200)
[<c045e6b4>] (stmmac_mdio_register) from [<c045b850>] (stmmac_dvr_probe+0x850/0x96c)
[<c045b850>] (stmmac_dvr_probe) from [<c0465180>] (sun7i_gmac_probe+0x120/0x180)
[<c0465180>] (sun7i_gmac_probe) from [<c03f7be8>] (platform_drv_probe+0x50/0xac)
[<c03f7be8>] (platform_drv_probe) from [<c03f63e0>] (driver_probe_device+0x234/0x2e4)
[<c03f63e0>] (driver_probe_device) from [<c03f6534>] (__driver_attach+0xa4/0xa8)
[<c03f6534>] (__driver_attach) from [<c03f49ec>] (bus_for_each_dev+0x4c/0x9c)
[<c03f49ec>] (bus_for_each_dev) from [<c03f59fc>] (bus_add_driver+0x190/0x214)
[<c03f59fc>] (bus_add_driver) from [<c03f6dfc>] (driver_register+0x78/0xf4)
[<c03f6dfc>] (driver_register) from [<c010177c>] (do_one_initcall+0x44/0x168)
[<c010177c>] (do_one_initcall) from [<c0900d88>] (kernel_init_freeable+0x144/0x1d0)
[<c0900d88>] (kernel_init_freeable) from [<c060ecfc>] (kernel_init+0x8/0x110)
[<c060ecfc>] (kernel_init) from [<c0107738>] (ret_from_fork+0x14/0x3c)
Code: e59021c8 e59d401c e590302c e3540000 (e5922048)
---[ end trace 39ae87c7923562d0 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Tested-By: Priit Laes <plaes@plaes.org>
Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helps tools such as wpa_supplicant can start even if the macsec
module isn't loaded yet.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the value of the mrouter flag in struct mlxsw_sp_bridge_port when
it is being changed.
Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netif_napi_del() should be paired with netif_napi_add(), however no
such call takes place in ftgmac100_probe(). This triggers a NULL
pointer dereference if e.g. no PHY is found by the MDIO probe:
[ 2.770000] libphy: Fixed MDIO Bus: probed
[ 2.770000] ftgmac100 1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8
[ 2.790000] libphy: ftgmac100_mdio: probed
[ 2.790000] ftgmac100 1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found
[ 2.790000] ftgmac100 1e660000.ethernet: MII Probe failed!
[ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 2.810000] pgd = 80004000
[ 2.810000] [00000004] *pgd=00000000
[ 2.810000] Internal error: Oops: 805 [#1] ARM
[ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1
[ 2.810000] Hardware name: ASpeed SoC
[ 2.810000] task: 9e421b60 task.stack: 9e4a0000
[ 2.810000] PC is at netif_napi_del+0x74/0xa4
[ 2.810000] LR is at ftgmac100_probe+0x290/0x674
[ 2.810000] pc : [<80331004>] lr : [<80292b30>] psr: 60000013
[ 2.810000] sp : 9e4a1d70 ip : 9e4a1d88 fp : 9e4a1d84
[ 2.810000] r10: 9e565000 r9 : ffffffed r8 : 00000007
[ 2.810000] r7 : 9e565480 r6 : 9ec072c0 r5 : 00000000 r4 : 9e5654d8
[ 2.810000] r3 : 9e565530 r2 : 00000000 r1 : 00000000 r0 : 9e5654d8
[ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 2.810000] Control: 00c5387d Table: 80004008 DAC: 00000055
[ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188)
[ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000)
[ 2.810000] 1d60: 9e565000 9e549e10 9e4a1dcc 9e4a1d88
[ 2.810000] 1d80: 80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000
[ 2.810000] 1da0: 9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000
[ 2.810000] 1dc0: 9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4
[ 2.810000] 1de0: 9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10
[ 2.810000] 1e00: 9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28
[ 2.810000] 1e20: 80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48
[ 2.810000] 1e40: 80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640
[ 2.810000] 1e60: 9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0
[ 2.810000] 1e80: 8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8
[ 2.810000] 1ea0: 80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec
[ 2.810000] 1ec0: 9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258
[ 2.810000] 1ee0: 80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc
[ 2.810000] 1f00: 9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000
[ 2.810000] 1f20: 9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057
[ 2.810000] 1f40: 9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0
[ 2.810000] 1f60: 3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000
[ 2.810000] 1f80: 00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158
[ 2.810000] 1fa0: 00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000
[ 2.810000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.810000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5
[ 2.810000] [<80331004>] (netif_napi_del) from [<80292b30>] (ftgmac100_probe+0x290/0x674)
[ 2.810000] [<80292b30>] (ftgmac100_probe) from [<80243df8>] (platform_drv_probe+0x60/0xc0)
[ 2.810000] [<80243df8>] (platform_drv_probe) from [<80242178>] (driver_probe_device+0x280/0x44c)
[ 2.810000] [<80242178>] (driver_probe_device) from [<80242434>] (__driver_attach+0xf0/0x104)
[ 2.810000] [<80242434>] (__driver_attach) from [<80240148>] (bus_for_each_dev+0x7c/0xb0)
[ 2.810000] [<80240148>] (bus_for_each_dev) from [<802425dc>] (driver_attach+0x28/0x30)
[ 2.810000] [<802425dc>] (driver_attach) from [<80240ba8>] (bus_add_driver+0x14c/0x268)
[ 2.810000] [<80240ba8>] (bus_add_driver) from [<80243068>] (driver_register+0x88/0x104)
[ 2.810000] [<80243068>] (driver_register) from [<80244a38>] (__platform_driver_register+0x40/0x54)
[ 2.810000] [<80244a38>] (__platform_driver_register) from [<805ab264>] (ftgmac100_driver_init+0x18/0x20)
[ 2.810000] [<805ab264>] (ftgmac100_driver_init) from [<8058ae70>] (do_one_initcall+0xac/0x168)
[ 2.810000] [<8058ae70>] (do_one_initcall) from [<8058b040>] (kernel_init_freeable+0x114/0x1cc)
[ 2.810000] [<8058b040>] (kernel_init_freeable) from [<803fd170>] (kernel_init+0x18/0x104)
[ 2.810000] [<803fd170>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c)
[ 2.810000] Code: e594205c e5941058 e2843058 e3a05000 (e5812004)
[ 3.210000] ---[ end trace f32811052fd3860c ]---
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull RTC fix from Alexandre Belloni:
"Fix regmap configuration for ds1307"
* tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1307: fix regmap config
|
|
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
|
|
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b5342 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Pull timer fixes from Thomas Gleixner:
"A few small fixes for timer drivers:
- Prevent infinite recursion in the arm architected timer driver with
ftrace
- Propagate error codes to the caller in case of failure in EM STI
driver
- Adjust a bogus loop iteration in the arm architected timer driver
- Add a missing Kconfig dependency to the pistachio clocksource to
prevent build failures
- Correctly check for IS_ERR() instead of NULL in the shared timer-of
code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled
clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies
clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL
clocksource/drivers/em_sti: Fix error return codes in em_sti_probe()
clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
|
|
Pull irq fixes from Thomas Gleixner:
"A pile of smallish changes all over the place:
- Add a missing ISB in the GIC V1 driver
- Remove an ACPI version check in the GIC V3 ITS driver
- Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
spurious wakeups
- Remove the artifical limitation of ITS instances to the number of
NUMA nodes which prevents utilizing the ITS hardware correctly
- Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code
- Honour the force affinity argument in the GIC-V3 driver which is
required to make perf work correctly
- Correctly report allocation failures in GIC-V2/V3 to avoid using
half allocated and initialized interrupts.
- Fixup checks against nr_cpu_ids in the generic IPI code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/ipi: Fixup checks against nr_cpu_ids
genirq: Restore trigger settings in irq_modify_status()
MAINTAINERS: Remove Jason Cooper's irqchip git tree
irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
irqchip: brcmstb-l2: Define an irq_pm_shutdown function
irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
irqchip/gic-v3: Honor forced affinity setting
irqchip/gic-v3: Report failures in gic_irq_domain_alloc
irqchip/gic-v2: Report failures in gic_irq_domain_alloc
irqchip/atmel-aic: Remove root argument from ->fixup() prototype
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
|
|
enable_4k_uar module parameter was added in patch cited below to
address the backward compatibility issue in SRIOV when the VM has
system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar
implementation.
The above compatibility issue does not exist in the non SRIOV case.
In this patch, we always enable 4k uar implementation if SRIOV
is not enabled on mlx4's supported cards.
Fixes: 76e39ccf9c36 ("net/mlx4_core: Fix backward compatibility on VFs")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the pci_find_pcie_root_port() function is called on a root port
itself, return the root port rather than NULL.
This effectively reverts commit 0e405232871d6 ("PCI: fix oops when
try to find Root Port for a PCI device") which added an extra check
that would now be redundant.
Fixes: a99b646afa8a ("PCI: Disable PCIe Relaxed Ordering if unsupported")
Fixes: c56d4450eb68 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported a double free [1], caused by the fact
that tun driver was not updated properly when priv_destructor
was added.
When/if register_netdevice() fails, priv_destructor() must have been
called already.
[1]
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x7f/0x260 mm/kasan/report.c:252
kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333
kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_set_iff drivers/net/tun.c:1884 [inline]
__tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x443ff9
RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9
RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0
R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627
kmalloc include/linux/slab.h:493 [inline]
kzalloc include/linux/slab.h:666 [inline]
selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012
security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506
tun_set_iff drivers/net/tun.c:1839 [inline]
__tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563
register_netdevice+0x8d0/0xee0 net/core/dev.c:7605
tun_set_iff drivers/net/tun.c:1859 [inline]
__tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
The buggy address belongs to the object at ffff8801d2843b40
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
32-byte region [ffff8801d2843b40, ffff8801d2843b60)
The buggy address belongs to the page:
page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f
raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc
>ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc
^
ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
==================================================================
Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"A small set of fixes that should go into this release. This contains:
- An NVMe pull request from Christoph, with a few select fixes.
One of them fix a polling regression in this series, in which it's
trivial to cause the kernel to disable most of the hardware queue
interrupts.
- Fixup for a blk-mq queue usage imbalance on request allocation,
from Keith.
- A xen block pull request from Konrad, fixing two issues with
xen/xen-blkfront"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-pci: add a fallback when pci_irq_get_affinity returns NULL
nvme-pci: set cqe_seen on polled completions
nvme-fabrics: fix reporting of unrecognized options
nvmet-fc: eliminate incorrect static markers on local variables
nvmet-fc: correct use after free on list teardown
nvmet: don't overwrite identify sn/fr with 0-bytes
xen-blkfront: use a right index when checking requests
xen: fix bio vec merging
blk-mq: Fix queue usage on failed request allocation
|
|
Pull rdma fixes from Doug Ledford:
"Fourth set of -rc fixes for 4.13 cycle. This is all of the -rc fixes
that we know of. I suspect this will be the last rc pull request, but
you never know, I could be wrong.
Nothing major here. There are the i40iw patches I mentioned in my last
pull request minus one that I pulled out because it wasn't a fix and
not appropriate for the rc cycle. Then a few other items trickled in
and were added to the pull request. It's fairly small aside from those
five i40iw patches
- Set of five i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by
creating a new function and using it where needed instead of just
patching up a few lines...a smaller fix could probably be done, but
the larger fix is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't
actually happen, I expect a patch to remove this from all drivers
that share this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/uverbs: Fix NULL pointer dereference during device removal
IB/core: Protect sysfs entry on ib_unregister_device
iw_cxgb4: fix misuse of integer variable
IB/hns: fix memory leak on ah on error return path
i40iw: Fix potential fcn_id_array out of bounds
i40iw: Use correct alignment for CQ0 memory
i40iw: Fix typecast of tcp_seq_num
i40iw: Correct variable names
i40iw: Fix parsing of query/commit FPM buffers
RDMA/vmw_pvrdma: Report CQ missed events
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, nothing serious this time. Here is a full
list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete
patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for
device repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: ti: ti_sci_pm_domains: Populate name for genpd
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
|
|
The loop counter k is currently being decremented from zero which
is incorrect. Fix this by incrementing k instead
Detected by CoverityScan, CID#401847 ("Infinite loop")
Fixes: 83f18a557c6d ("netxen_nic: fw dump support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Another dma-mapping regression fix"
* tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping:
of: fix DMA mask generation
|
|
The while loop that performs the dma page unmapping never decrements
index counter f and hence loops forever. Fix this with a pre-decrement
on f.
Detected by CoverityScan, CID#1357309 ("Infinite loop")
Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe changes from Christoph:
"The fixes are getting really small now - two for FC, one for PCI, one
for the fabrics layer and one for the target."
|
|
Commit b6a1d093f96b ("PM / Domains: Extend generic power domain
debugfs") now creates a debugfs directory for each genpd based on the
name of the genpd. Currently no name is given to the genpd created by
ti_sci_pm_domains driver so because of this we see a NULL pointer
dereferences when it is accessed on boot when the debugfs entry creation
is attempted.
Give the genpd a name before registering it to avoid this.
Fixes: 52835d59fc6c ("soc: ti: Add ti_sci_pm_domains driver")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes: 920d13a884 ("nvme-pci: factor out the cqe reading mechanics from __nvme_process_cq")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull drm fixes from Dave Airlie:
"Seems to be slowing down nicely, just one amdgpu fix, and a bunch of
i915 fixes"
* tag 'drm-fixes-for-v4.13-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: save list length when fence is signaled
drm/i915: Avoid the gpu reset vs. modeset deadlock
drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt
drm/i915: Return correct EDP voltage swing table for 0.85V
drm/i915/cnl: Add slice and subslice information to debugfs.
drm/i915: Perform an invalidate prior to executing golden renderstate
drm/i915: remove unused function declaration
|
|
Pull power management fixes from Rafael Wysocki:
"These fix two issues related to exposing the current CPU frequency to
user space on x86.
Specifics:
- Disable interrupts around reading IA32_APERF and IA32_MPERF in
aperfmperf_snapshot_khz() (introduced recently) to avoid excessive
delays between the reads that may result from interrupt handling
(Doug Smythies).
- Fix the computation of the CPU frequency to be reported through the
pstate_sample tracepoint in intel_pstate (Doug Smythies)"
* tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: x86: Disable interrupts during MSRs reading
cpufreq: intel_pstate: report correct CPU frequencies during trace
|
|
Pull input fixes from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB
Input: elan_i2c - add ELAN0608 to the ACPI table
Input: trackpoint - assume 3 buttons when buttons detection fails
|
|
single amdgpu fix.
* 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: save list length when fence is signaled
|
|
* intel_pstate-fix:
cpufreq: intel_pstate: report correct CPU frequencies during trace
* cpufreq-x86-fix:
cpufreq: x86: Disable interrupts during MSRs reading
|
|
Pull parisc fixes from Helge Deller:
- Fix PCI memory bar assignments with 64-bit kernels on machines with
Dino/Cujo PCI chipsets. This makes PCI graphic cards work on such
machines (from Thomas Bogendoerfer).
- Fix documentation to be more clear about the difference between %pF
and %pS printk format usage. There are still many places in the
kernel which have it wrong (from Petr Mladek, Sergey Senozhatsky &
me).
* 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
printk-formats.txt: Better describe the difference between %pS and %pF
parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
|
|
Only print the specified options that are not recognized, instead
of the whole list of options.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
|
|
Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to
get a slave pty file descriptor, the resulting file descriptor doesn't
look right in /proc/<pid>/fd/<fd>. In particular, he wanted to use
readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty
(basically implementing "ptsname{_r}()").
The reason for that was that we had generated the wrong 'struct path'
when we create the pty in ptmx_open().
In particular, the dentry was correct, but the vfsmount pointed to the
mount of the ptmx node. That _can_ be correct - in case you use
"/dev/pts/ptmx" to open the master - but usually is not. The normal
case is to use /dev/ptmx, which then looks up the pts/ directory, and
then the vfsmount of the ptmx node is obviously the /dev directory, not
the /dev/pts/ directory.
We actually did have the right vfsmount available, but in the wrong
place (it gets looked up in 'devpts_acquire()' when we get a reference
to the pts filesystem), and so ptmx_open() used the wrong mnt pointer.
The end result of this confusion was that the pty worked fine, but when
if you did TIOCGPTPEER to get the slave side of the pty, end end result
would also work, but have that dodgy 'struct path'.
And then when doing "d_path()" on to get the pathname, the vfsmount
would not match the root of the pts directory, and d_path() would return
an empty pathname thinking that the entry had escaped a bind mount into
another mount.
This fixes the problem by making devpts_acquire() return the vfsmount
for the pts filesystem, allowing ptmx_open() to trivially just use the
right mount for the pts dentry, and create the proper 'struct path'.
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Historically, DMA masks have suffered some ambiguity between whether
they represent the range of physical memory a device can access, or the
address bits a device is capable of driving, particularly since on many
platforms the two are equivalent. Whilst there are some stragglers left
(dma_max_pfn(), I'm looking at you...), the majority of DMA code has
been cleaned up to follow the latter definition, not least since it is
the only one which makes sense once IOMMUs are involved.
In this respect, of_dma_configure() has always done the wrong thing in
how it generates initial masks based on "dma-ranges". Although rounding
down did not affect the TI Keystone platform where dma_addr + size is
already a power of two, in any other case it results in a mask which is
at best unnecessarily constrained and at worst unusable.
BCM2837 illustrates the problem nicely, where we have a DMA base of 3GB
and a size of 1GB - 16MB, giving dma_addr + size = 0xff000000 and a
resultant mask of 0x7fffffff, which is then insufficient to even cover
the necessary offset, effectively making all DMA addresses out-of-range.
This has been hidden until now (mostly because we don't yet prevent
drivers from simply overwriting this initial mask later upon probe), but
due to recent changes elsewhere now shows up as USB being broken on
Raspberry Pi 3.
Make it right by rounding up instead of down, such that the mask
correctly correctly describes all possisble bits the device needs to
emit.
Fixes: 9a6d7298b083 ("of: Calculate device DMA masks based on DT dma-range size")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There were 2 statics introduced that were bogus. Removed the static
designations.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull SCSI fixes from James Bottomley:
"A couple of minor fixes (st, ses) and some bigger driver fixes for
qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with
mq)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ses: Fix wrong page error
scsi: ipr: Fix scsi-mq lockdep issue
scsi: st: fix blk_get_queue usage
scsi: qla2xxx: Fix system crash while triggering FW dump
|
|
As part of ib_uverbs_remove_one which might be triggered upon
reset flow, we trigger IB_EVENT_DEVICE_FATAL event to userspace
application.
If device was removed after uverbs fd was opened but before
ib_uverbs_get_context was called, the event file will be accessed
before it was allocated, result in NULL pointer dereference:
[ 72.325873] BUG: unable to handle kernel NULL pointer dereference at (null)
...
[ 72.325984] IP: _raw_spin_lock_irqsave+0x22/0x40
[ 72.327123] Call Trace:
[ 72.327168] ib_uverbs_async_handler.isra.8+0x2e/0x160 [ib_uverbs]
[ 72.327216] ? synchronize_srcu_expedited+0x27/0x30
[ 72.327269] ib_uverbs_remove_one+0x120/0x2c0 [ib_uverbs]
[ 72.327330] ib_unregister_device+0xd0/0x180 [ib_core]
[ 72.327373] mlx5_ib_remove+0x74/0x140 [mlx5_ib]
[ 72.327422] mlx5_remove_device+0xfb/0x110 [mlx5_core]
[ 72.327466] mlx5_unregister_interface+0x3c/0xa0 [mlx5_core]
[ 72.327509] mlx5_ib_cleanup+0x10/0x962 [mlx5_ib]
[ 72.327546] SyS_delete_module+0x155/0x230
[ 72.328472] ? exit_to_usermode_loop+0x70/0xa6
[ 72.329370] do_syscall_64+0x54/0xc0
[ 72.330262] entry_SYSCALL64_slow_path+0x25/0x25
Fix it by checking that user context was allocated before
trigger the event.
Fixes: 036b10635739 ('IB/uverbs: Enable device removal when there are active user space applications')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pull xen block changes from Konrad:
Two fixes, both of them spotted by Amazon:
1) Fix in Xen-blkfront caused by the re-write in 4.8 time-frame.
2) Fix in the xen_biovec_phys_mergeable which allowed guest
requests when using NVMe - to slurp up more data than allowed
leading to an XSA (which has been made public today).
|
|
ib_unregister_device is not protecting removal of sysfs entries.
A call to ib_register_device in that window can result in
duplicate sysfs entry warning. Move mutex_unlock to after
ib_device_unregister_sysfs to protect against sysfs entry creation.
This issue is exposed during driver load/unload stress test.
WARNING: CPU: 5 PID: 4445 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5f/0x70
sysfs: cannot create duplicate filename '/class/infiniband/i40iw0'
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H
BIOS F7 01/17/2014
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x67/0x98
__warn+0xcc/0xf0
warn_slowpath_fmt+0x4a/0x50
? kernfs_path_from_node+0x4b/0x60
sysfs_warn_dup+0x5f/0x70
sysfs_do_create_link_sd.isra.2+0xb7/0xc0
sysfs_create_link+0x20/0x40
device_add+0x28c/0x600
ib_device_register_sysfs+0x58/0x170 [ib_core]
ib_register_device+0x325/0x570 [ib_core]
? i40iw_register_rdma_device+0x1f4/0x400 [i40iw]
? kmem_cache_alloc_trace+0x143/0x330
? __raw_spin_lock_init+0x2d/0x50
i40iw_register_rdma_device+0x2dc/0x400 [i40iw]
i40iw_open+0x10a6/0x1950 [i40iw]
? i40iw_open+0xeab/0x1950 [i40iw]
? i40iw_make_cm_node+0x9c0/0x9c0 [i40iw]
i40e_client_subtask+0xa4/0x110 [i40e]
i40e_service_task+0xc2d/0x1320 [i40e]
process_one_work+0x203/0x710
? process_one_work+0x16f/0x710
worker_thread+0x126/0x4a0
? trace_hardirqs_on+0xd/0x10
kthread+0x112/0x150
? process_one_work+0x710/0x710
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
---[ end trace fd11b69e21ea7653 ]---
Couldn't register device i40iw0 with driver model
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fixes: ee30f7d507c0 ("iw_cxgb4: Max fastreg depth depends on DSGL support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When dmac is NULL, ah is not being freed on the error return path. Fix
this by kfree'ing it.
Detected by CoverityScan, CID#1452636 ("Resource Leak")
Fixes: d8966fcd4c25 ("IB/core: Use rdma_ah_attr accessor functions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Avoid out of bounds error by utilizing I40IW_MAX_STATS_COUNT
instead of I40IW_INVALID_FCN_ID.
Signed-off-by: Christopher N Bednarz <christoper.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Utilize correct alignment variable when allocating
DMA memory for CQ0.
Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The typecast of tcp_seq_num incorrectly uses u8. Fix by
casting to u32.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fix incorrect naming of status code and struct. Use inline
instead of immediate.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Parsing of commit/query Host Memory Cache Function Private Memory
is not skipping over reserved fields and incorrectly assigning
those values into object's base/cnt/max_cnt fields. Skip over
reserved fields and set correct values. Also correct memory
alignment requirement for commit/query FPM buffers.
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is a chance of a race between arming the CQ and receiving
completions. By reporting CQ missed events any ULPs should poll
again to get the completions.
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Acked-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Use list_for_each_entry_safe to prevent list handling from referencing
next pointers directly after list_del's
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The merged version of my patch "nvmet: don't report 0-bytes in serial
number" fails to remove two lines which should have been replaced,
so that the space-padded strings are overwritten again with 0-bytes.
Fix it.
Fixes: 42de82a8b544 nvmet: don't report 0-bytes in serial number
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For 64bit kernels the lmmio_space_offset of the host bridge window
isn't set correctly on systems with dino/cujo PCI host bridges.
This leads to not assigned memory bars and failing drivers, which
need to use these bars.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull networking fixes from David Miller:
1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
Grumbach.
2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
Vivien Didelot.
3) Fix two regressions with bonding on wireless, from Andreas Born.
4) Fix build when busypoll is disabled, from Daniel Borkmann.
5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.
6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
Westphal.
7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
Tianhong.
8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.
9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
Dumazet.
10) Need to purge socket write queue in dccp_destroy_sock(), also from
Eric Dumazet.
11) Make bpf_trace_printk() work properly on 32-bit architectures, from
Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
bpf: fix bpf_trace_printk on 32 bit archs
PCI: fix oops when try to find Root Port for a PCI device
sfc: don't try and read ef10 data on non-ef10 NIC
net_sched: remove warning from qdisc_hash_add
net_sched/sfq: update hierarchical backlog when drop packet
net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
ipv4: fix NULL dereference in free_fib_info_rcu()
net: Fix a typo in comment about sock flags.
ipv6: fix NULL dereference in ip6_route_dev_notify()
tcp: fix possible deadlock in TCP stack vs BPF filter
dccp: purge write queue in dccp_destroy_sock()
udp: fix linear skb reception with PEEK_OFF
ipv6: release rt6->rt6i_idev properly during ifdown
af_key: do not use GFP_KERNEL in atomic contexts
tcp: ulp: avoid module refcnt leak in tcp_set_ulp
net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
PCI: Disable Relaxed Ordering Attributes for AMD A1100
PCI: Disable Relaxed Ordering for some Intel processors
PCI: Disable PCIe Relaxed Ordering if unsupported
...
|
|
Eric report a oops when booting the system after applying
the commit a99b646afa8a ("PCI: Disable PCIe Relaxed..."):
[ 4.241029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[ 4.247001] IP: pci_find_pcie_root_port+0x62/0x80
[ 4.253011] PGD 0
[ 4.253011] P4D 0
[ 4.253011]
[ 4.258013] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 4.262015] Modules linked in:
[ 4.265005] CPU: 31 PID: 1 Comm: swapper/0 Not tainted 4.13.0-dbx-DEV #316
[ 4.271002] Hardware name: Intel RML,PCH/Iota_QC_19, BIOS 2.40.0 06/22/2016
[ 4.279002] task: ffffa2ee38cfa040 task.stack: ffffa51ec0004000
[ 4.285001] RIP: 0010:pci_find_pcie_root_port+0x62/0x80
[ 4.290012] RSP: 0000:ffffa51ec0007ab8 EFLAGS: 00010246
[ 4.295003] RAX: 0000000000000000 RBX: ffffa2ee36bae000 RCX: 0000000000000006
[ 4.303002] RDX: 000000000000081c RSI: ffffa2ee38cfa8c8 RDI: ffffa2ee36bae000
[ 4.310013] RBP: ffffa51ec0007b58 R08: 0000000000000001 R09: 0000000000000000
[ 4.317001] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa51ec0007ad0
[ 4.324005] R13: ffffa2ee36bae098 R14: 0000000000000002 R15: ffffa2ee37204818
[ 4.331002] FS: 0000000000000000(0000) GS:ffffa2ee3fcc0000(0000) knlGS:0000000000000000
[ 4.339002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.345001] CR2: 0000000000000050 CR3: 000000401000f000 CR4: 00000000001406e0
[ 4.351002] Call Trace:
[ 4.354012] ? pci_configure_device+0x19f/0x570
[ 4.359002] ? pci_conf1_read+0xb8/0xf0
[ 4.363002] ? raw_pci_read+0x23/0x40
[ 4.366011] ? pci_read+0x2c/0x30
[ 4.370014] ? pci_read_config_word+0x67/0x70
[ 4.374012] pci_device_add+0x28/0x230
[ 4.378012] ? pci_vpd_f0_read+0x50/0x80
[ 4.382014] pci_scan_single_device+0x96/0xc0
[ 4.386012] pci_scan_slot+0x79/0xf0
[ 4.389001] pci_scan_child_bus+0x31/0x180
[ 4.394014] acpi_pci_root_create+0x1c6/0x240
[ 4.398013] pci_acpi_scan_root+0x15f/0x1b0
[ 4.402012] acpi_pci_root_add+0x2e6/0x400
[ 4.406012] ? acpi_evaluate_integer+0x37/0x60
[ 4.411002] acpi_bus_attach+0xdf/0x200
[ 4.415002] acpi_bus_attach+0x6a/0x200
[ 4.418014] acpi_bus_attach+0x6a/0x200
[ 4.422013] acpi_bus_scan+0x38/0x70
[ 4.426011] acpi_scan_init+0x10c/0x271
[ 4.429001] acpi_init+0x2fa/0x348
[ 4.433004] ? acpi_sleep_proc_init+0x2d/0x2d
[ 4.437001] do_one_initcall+0x43/0x169
[ 4.441001] kernel_init_freeable+0x1d0/0x258
[ 4.445003] ? rest_init+0xe0/0xe0
[ 4.449001] kernel_init+0xe/0x150
====================== cut here =============================
It looks like the pci_find_pcie_root_port() was trying to
find the Root Port for the PCI device which is the Root
Port already, it will return NULL and trigger the problem,
so check the highest_pcie_bridge to fix thie problem.
Fixes: a99b646afa8a ("PCI: Disable PCIe Relaxed Ordering if unsupported")
Fixes: c56d4450eb68 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Stephan Gatzka
Florian Fainelli
Sabrina Dubroca
Nogah Frankel
Andrew Jeffery
Linus Torvalds
Heiner Kallweit
Huy Nguyen
Thierry Reding
Eric Dumazet
Colin Ian King
Jens Axboe
Dave Gerlach
Keith Busch
Dave Airlie
Rafael J. Wysocki
Christoph Hellwig
Robin Murphy
James Smart
Maor Gottlieb
Shiraz Saleem
Steve Wise
Christopher N Bednarz
Mustafa Ismail
Chien Tin Tung
Bryan Tan
Martin Wilck
Thomas Bogendoerfer
dingtianhong