| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Non-continuous clock mode doesn't work because driver doesn't support it
properly. The bridge driver programs wrong bitfields that are required by
the non-continuous mode (BTACNTRL1 register bitfields are swapped in the
code), but fixing them doesn't help.
Display panel of ASUS Transformer TF700T tablet supports non-continuous
mode and display doesn't work at all using that mode. There are no
device-trees that are actively using this DSI bridge in upstream yet,
so clearly the broken mode wasn't ever tested properly. It's a bit too
difficult to get LP mode working, hence let's disable the offending mode
for now and fall back to continuous mode.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-5-digetx@gmail.com
|
|
Calculate video start delay based on the display timing instead
of hardcoding it to a default value. This fixes "trembling" display
output on Asus Transformer TF700T which uses Panasonic VVX10F004B00
display panel.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-4-digetx@gmail.com
|
|
Support pulse-mode synchronization which is supported and used by simple
DSI panels like Panasonic VVX10F004B00.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-3-digetx@gmail.com
|
|
The driver assumes that reference clock is always-enabled, but this is
hardware-dependent and not true for ASUS Transformer TF700T. Make driver
enable / disable the reference clock.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-2-digetx@gmail.com
|
|
This removes the chrdev_lock from the counter subsystem. This was
intended to prevent opening the chrdev more than once. However, this
doesn't work in practice since userspace can duplicate file descriptors
and pass file descriptors to other processes. Since this protection
can't be relied on, it is best to just remove it.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20211017185521.3468640-1-david@lechnology.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_amba_device_create() uses irq_of_parse_and_map() to translate
a DT interrupt specification into a Linux virtual interrupt number.
But it doesn't properly handle the case where the interrupt controller
is not yet available, eg, when pl011 interrupt is connected to MBIGEN
interrupt controller, because the mbigen initialization is too late,
which will lead to no IRQ due to no IRQ domain found, log is shown below,
"irq: no irq domain found for uart0 !"
use of_irq_get() to return -EPROBE_DEFER as above, and in the function
amba_device_try_add()/amba_device_add(), it will properly handle in such
case, also return 0 in other fail cases to be consistent as before.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reported-by: Ruizhe Lin <linruizhe@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"),
no irq case has been removed, irq_of_parse_and_map() will return
0 in all cases when get error from parse and map an interrupt into
linux virq space.
amba_device_register() is only used on no-DT initialization, see
s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c
ep93xx_init_devices() arch/arm/mach-ep93xx/core.c
They won't set -1 to irq[0], so no need the warn.
This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
No one use the following functions, kill them.
amba_aphb_device_add()
amba_apb_device_add()
amba_apb_device_add_res()
amba_ahb_device_add()
amba_ahb_device_add_res()
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
On Windows systems, ASUS laptops uses the "turn display off" key
(usually fn+f6) to turn both display and keyboard backlit off. On Linux
systems, this key has no effect at all since most desktop enviroments
don't deal with KEY_DISPLAY_OFF. By mapping it to KEY_SCREENLOCK
instead, would enable desktop environments to handle this key as a
screen lock intent from the user, out of the box.
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some Apple ISO keyboards have a quirk where the backtick/tilde key is
swapped with the less-than/greater-than key. Unfortunately, there is no
perfectly reliable way to detect whether a keyboard has the quirk or
not, but the quirk appears to only be present on models that support
Bluetooth, and the affected keyboards usually report country code 13 in
the HID descriptor.
Therefore, the best we can do is to change
/sys/module/hid_apple/parameters/iso_layout to a ternary:
0 = Not ISO or ISO and not quirky
1 = ISO and quirky
-1 = Guess based on product ID and country code
Table of keyboards that José, Julian and I have tested:
Product Model Shape Labels Bus Country Quirky
=========================================================
05ac:0201 M2452 ANSI Usonian USB 0 No
05ac:020b A1048 ANSI Usonian USB 0 No
05ac:020c A1048 ISO Québécois USB 13 No
05ac:0221 A1243 ISO Norwegian USB 13 No
05ac:0221 A1243 ISO Portuguese USB 13 No
05ac:0221 A1243 ISO Swedish USB 13 No
05ac:0221 A1243 ISO Swiss USB 13 No
05ac:022c A1255 ANSI Usonian BT 33 No
05ac:022d A1255 ISO Hebrew BT 13 Yes
05ac:022d A1255 ISO Québécois BT 13 Yes
05ac:022d A1255 ISO Spanish BT 13 Yes
05ac:023a A1314 ISO Russian BT 13 Yes
05ac:023a A1314 ISO Swiss BT 13 Yes
05ac:024f A1243 ANSI Usonian USB 0 No
05ac:0250 A1243 ISO British USB 13 No
05ac:0250 A1243 ISO German USB 13 No
05ac:0250 A1243 ISO Italian USB 13 No
05ac:0250 A1243 ISO Québécois USB 13 No
05ac:0251 A1243 JIS Japanese USB 15 No
05ac:0255 A1314 ANSI Usonian BT 33 No
05ac:0255 A1314 ANSI Taiwanese BT 33 No
05ac:0255 A1314 ANSI Thai BT 33 No
05ac:0256 A1314 ISO Arabic BT 13 Yes
05ac:0256 A1314 ISO French BT 13 Yes
05ac:0256 A1314 ISO German BT 13 Yes
05ac:0256 A1314 ISO Norwegian BT 13 Yes
05ac:0256 A1314 ISO Spanish BT 13 Yes
05ac:0256 A1314 ISO Swiss BT 13 Yes
05ac:0257 A1314 JIS Japanese BT 15 No
05ac:0267 A1644 ANSI Usonian USB 33 No
004c:0267 A1644 ANSI Usonian BT 0 No
05ac:0267 A1644 ISO British USB 13 Yes
004c:0267 A1644 ISO British BT 0 Yes
05ac:0267 A1644 ISO Finnish USB 13 Yes
004c:0267 A1644 ISO Finnish BT 0 Yes
05ac:0267 A1644 ISO Québécois USB 13 Yes
004c:0267 A1644 ISO Québécois BT 0 Yes
05ac:0267 A1644 ISO Spanish USB 13 Yes
004c:0267 A1644 ISO Spanish BT 0 Yes
05ac:0267 A1644 ISO Swiss USB 13 Yes
004c:0267 A1644 ISO Swiss BT 0 Yes
05ac:0267 A1644 JIS Japanese USB 15 No
004c:0267 A1644 JIS Japanese BT 0 No
05ac:029c A2450 ANSI Usonian USB 33 No
004c:029c A2450 ANSI Usonian BT 0 No
05ac:029c A2450 ISO Spanish USB 13 Yes
004c:029c A2450 ISO Spanish BT 0 Yes
05ac:029c A2450 JIS Japanese USB 15 No
004c:029c A2450 JIS Japanese BT 0 No
Reported-by: José Expósito <jose.exposito89@gmail.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Tested-by: Julian Weigt <juw@posteo.de>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The ANSI, ISO, and JIS variants of this keyboard all have the same
product ID.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add new registers to support systems with multiply cooling devices.
Modular systems support up-to four cooling devices. This capability
is detected according to the registers initial setting.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093609.3771576-1-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Provide support for the Nvidia MSN4800-XX line cards for MSN4800
Ethernet modular switch system, providing a high performance switching
solution for Enterprise Data Centers (EDC) for building Ethernet based
clusters, High-Performance Computing (HPC) and embedded environments.
Initial version provides support for line card type MSN4800-C16. This
type of line card is equipped with:
- Lattice CPLD device, used for system and ports control.
- four Nvidia gearbox devices, used for port splitting.
- FPGA device, used for gearboxes management.
- 16x100G QSFP28 ports.
- hotpswap controllers, voltage regulators, analog-to-digital
convertors, nvram devices.
- status LED.
During initialization driver creates:
- line card's I2C tree through "i2c-mux-mlxcpd" driver.
- line card's LED objects through "leds-mlxreg" driver.
- line card's CPLD register space input / output "hwmon" attributes for
line control and monitoring through "mlxreg-io" driver. These
attributes provide CPLD and FPAG versioning, control for upgradable
components burning, NVRAM devices write protection, line card
revision, line card power consuming, line card reset cause
indication, etcetera.
Lattice CPLD device and nvram devices are feeding from auxiliary power
domain and accessible, when line card is powered off. These devices
are connected by line card driver probing routine, invoked after line
card security verification is done by hardware and event lc#n_verified
is received for line card located in slot #n.
Gearboxes, FPGA, hotpswap controllers, voltage regulators,
analog-to-digital convertors are feeding from main power domain. These
devices are connected after power good event "lc#n_powered" is received
for line card located in slot #n.
The driver 'mlxreg-lc' is driven by 'mlxreg-hotplug' driver following
relevant "hotplug" events.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Extend maximum number of the attributes, exposed to 'sysfs'.
It is requires in order to support modular systems, which
provide more attributes for system control, statuses and info.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-6-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add event notifier callbacks for modular system line cards. These
callbacks are to be passed to "mlxreg-hotplug" driver by line card
driver during probing. Then, when any line card related hotplug event
is received (insertion ,power, synch, ready), hotplug driver will
invoke callback for the relevant line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Extend the structure 'mlxreg_hotplug_device" with platform device field
to allow transition of the register map and system interrupt line number
to underlying hotplug devices, sharing the same register map and
same interrupt line with 'mlxreg-hotplug' driver.
Extend logic for hotplug devices creation and removing according to
the action associated with the hotplug device description. Previously
hotplug driver was capable to attach / de-attach upon hotplug events
only I2C devices handled by simple I2C drivers. Now it should be able
to attach also devices handled by the platform drivers.
The motivation is to allow transition of platform data like:
- system interrupt line number, sharing with 'mlxreg-hotplug' to
underlying hotplug devices.
- shared register map of programmable devices on main board to
underlying hotplug devices.
Additioanlly the number of 'sysfs' attributes is increased, since
modular system defines more 'sysfs' attributes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add initial chassis management support for Nvidia modular Ethernet
switch systems MSN4800, providing a high performance switching solution
for Enterprise Data Centers (EDC) for building Ethernet based clusters,
High-Performance Computing (HPC) and embedded environments.
This system could be equipped with the different types of replaceable
line cards and management board. The first system flavor will support
the line card type MSN4800-C16 equipped with Lattice CPLD devices aimed
for system and ASIC control, one Nvidia FPGA for gearboxes (PHYs)
management, and four Nvidia gearboxes for the port control and with
16x100GbE QSFP28 ports and also with various devices for electrical
control.
The system is equipped with eight slots for line cards, four slots for
power supplies and six slots for fans. It could be configured as fully
populated or with even only one line card. The line cards are
hot-pluggable.
In the future when more line card flavors are to be available (for
example line cards with 8x200Gb Eth port, with 4x400 Eth ports, or with
some kind of smart cards for offloading purpose), any type of line card
could be inserted at any slot.
The system is based on Nvidia Spectrum-3 ASIC. The switch height is
4U and it fits standard rack size.
System could be configured as fully populated or with even only one
line card. The line cards are hot-pluggable.
Line cards are connected to the chassis through I2C interface for the
chassis management operations and through PCIe for the networking
operations. Future line cards could be connected to the chassis through
InfiniBand fabric, instead of PCIe.
The first type of line card supports 16x100GbE QSFP28 Ethernet ports.
Those line cards equipped with the programmable devices aimed for
system control of Nvidia Ethernet switch ASIC control, Nvidia FPGA,
Nvidia gearboxes (PHYs).
The next coming card generations are supposed to support:
- Line cards with 8x200Gbe QSFP28 Ethernet ports.
- Line cards with 4x400Gbe QSFP-DD Ethernet ports.
- Smart cards equipped with Nvidia ARM CPU for offloading and for fast
access to the storage (EBoF).
- Fabric cards for inter-connection.
The basic system initialization flow with input signals from the
programmable device to kernel hotplug driver and with OS response
to some of these signals is depicted below.
lc#n_prsnt *-> Input: line card presence in/out events.
Informational event. Required action - 'udev' event
generation for logging.
lc#n_verified *-> Input: line card verification status events coming
after line card security signature validation by
hardware. Required action - connect line card
driver and initialized line card devices feeding
from system auxiliary power domain.
lc#n_pwr <-* Output: line card power on / off from OS. Action
should be performed by platform power management
driver.
lc#n_powered *-> Input: line card power on/off events coming after
line card "power good" on/off events, mean that
line card power up sequence has been successfully
completed or line card "power good" status has been
dropped. Required action - connect line card
devices feeding from system main power domain.
lc#n_synced *-> Input: line card synchronization events, coming
after hardware-firmware synchronization handshake.
Required action - to enable line card, in case
lc#n_ready has been received before.
lc#n_ready *-> Input: line card ready events, indicating line card
PHYs ready / unready states. Required action -
enable line card, in case lc#n_synced has been
received before.
lc#n_enable <-* Output: line card enable from OS - release FPGA and
PHYs line card devices from reset state. Action
should be performed by platform power management
driver.
lc#n_active *-> Input: when line card "active event" is received
for particular line card, its network, hardware
monitoring and thermal interfaces should be
configured according to the configuration obtained
from the firmware. When opposite "inactive event"
is received all the above interfaces should be
teared down. Required action - connect / disconnect
the above line card interfaces through ASIC I2C
chassis management driver.
For initial support:
- Define new system type 'VMOD0011' to support new modular system.
- Provide initial platform configuration for new system type.
- Extend the registers definitions.
- Add support for modular system registers related to line card
specific events - insertion/removal, power on/off, verification
and activation.
- Add hotplug configuration for the above events.
- Add configurations for hotplug actions for the modular system.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
struct gtt_range represents a GEM object. Rename the structure to struct
psb_gem_object and update all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-11-tzimmermann@suse.de
|
|
struct gtt_range represents a GEM object and should not be used for GTT
setup. Change psb_gtt_insert() and psb_gtt_remove() to receive all
necessary parameters from their caller. This also eliminates possible
failure from psb_gtt_insert().
There's one exception in psb_gtt_restore(), which requires an upcast
from struct resource to struct gtt_range when restoring the GTT after
hibernation. A possible solution would track the GEM objects that need
restoration separately from the GTT resource.
Rename the functions to psb_gtt_insert_pages() and psb_gtt_remove_pages()
to reflect their similarity to MMU interfaces.
v3:
* restore the comments about locking rules (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-10-tzimmermann@suse.de
|
|
Caching of the GEM object's backing pages are unrelated to GTT
management. Move the respective calls from GTT code to GEM code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-9-tzimmermann@suse.de
|
|
psb_gtt_alloc_range() allocates struct gtt_range, create the GTT resource
and performs some half-baked initialization. Inline the function into its
only caller psb_gem_create(). For creating the GTT resource, introduce a
new helper, psb_gtt_alloc_resource() that hides the details of the GTT.
For psb_gtt_free_range(), inline the function into its only caller
psb_gem_free_object(). While at it, remove the explicit invocation of
drm_gem_free_mmap_offset(). The mmap offset is already released by
drm_gem_object_release().
v3:
* replace offset[static 1] with pointer notation (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-8-tzimmermann@suse.de
|
|
psb_gtt_attach_pages() are not GTT functions but deal with the GEM
object's SHMEM pages. The only callers of psb_gtt_attach_pages() and
psb_gtt_detach_pages() are the GEM pin helpers. Inline the calls and
cleanup the resulting code.
v2:
* unlock gtt_mutex in pin-error handling (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-7-tzimmermann@suse.de
|
|
Rename psb_gtt_pin() to psb_gem_pin() to reflect the semantics of the
function. Same for psb_gtt_unpin(). No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-6-tzimmermann@suse.de
|
|
Support private objects for stolen memory in psb_gem_create() and
convert users to psb_gem_create(). For stolen memory, psb_gem_create()
now initializes the GEM object via drm_gem_private_object_init().
In the fbdev setup, replace the open-coded initialization of struct
gtt_range with a call to psb_gem_create(). Use drm_gem_object_put()
for release.
In the cursor setup, use psb_gem_create() and get a real GEM object.
Previously the allocated instance of struct gtt_range was only partially
initialized. Release the cursor GEM object in gma_crtc_destroy(). The
release was missing from the original code.
With the conversion of all callers to psb_gem_create(), the extern
declarations of psb_gtt_alloc_range, psb_gtt_free_range and
psb_gem_object_func are not required any longer. Declare them as
static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-5-tzimmermann@suse.de
|
|
Implement psb_gem_create() for general use. Create the GEM handle in
psb_gem_create_dumb(). Allows to use psb_gem_create() for creating all
of the GEM objects.
While at it, clean-up drm_gem_dumb_create() to make it more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-4-tzimmermann@suse.de
|
|
Convert upcasts from struct drm_gem_object to struct gtt_range to
to_gtt_range(). Some places used container_of() directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-3-tzimmermann@suse.de
|
|
Allocation and pinning helpers for struct gtt_range are GEM functions,
so move them to gem.c. No functional changes.
v2:
* keep docs for psb_gtt_{attach,detach}_pages() (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-2-tzimmermann@suse.de
|
|
Reuse the 8b/10b link training delay helpers. Functionally this skips
the check for invalid values for DPCD 1.4 and later at clock recovery
delay (as it's a fixed delay and bypasses the rd_interval) but the same
value will be checked and invalid values reported at channel
equalization.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-2-jani.nikula@intel.com
|
|
The link training delays are different and/or available in different
DPCD offsets depending on:
- Clock recovery vs. channel equalization
- DPRX vs. LTTPR
- 128b/132b vs. 8b/10b
- DPCD 1.4+ vs. earlier
Add helpers to get the correct delays in us, reading DPCD if
necessary. This is more straightforward than trying to retrofit the
existing helpers to take 128b/132b into account.
Having to pass in the DPCD receiver cap field seems unavoidable, because
reading it involves checking the revision and reading extended receiver
cap. So unfortunately the interface is mixed cached and read as needed.
v2: Remove delay_us < 0 check and the whole local var (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-1-jani.nikula@intel.com
|
|
The branch is a stable branch shared with ARM maintainers for the
first 13th patches of the series:
It is based on v5.14-rc3.
As stated by the changelog:
" [... ] enabling ARMv8.6 support for timer subsystem, and was prompted by a
discussion with Oliver around the fact that an ARMv8.6 implementation
must have a 1GHz counter, which leads to a number of things to break
in the timer code:
- the counter rollover can come pretty quickly as we only advertise a
56bit counter,
- the maximum timer delta can be remarkably small, as we use the
countdown interface which is limited to 32bit...
Thankfully, there is a way out: we can compute the minimal width of
the counter based on the guarantees that the architecture gives us,
and we can use the 64bit comparator interface instead of the countdown
to program the timer.
Finally, we start making use of the ARMv8.6 ECV features by switching
accesses to the counters to a self-synchronising register, removing
the need for an ISB. Hopefully, implementations will *not* just stick
an invisible ISB there...
A side effect of the switch to CVAL is that XGene-1 breaks. I have
added a workaround to keep it alive.
I have added Oliver's original patch[0] to the series and tweaked a
couple of things. Blame me if I broke anything.
The whole things has been tested on Juno (sysreg + MMIO timers),
XGene-1 (broken sysreg timers), FVP (FEAT_ECV, CNT*CTSS_EL0).
"
Link: https://lore.kernel.org/r/20211017124225.3018098-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.
Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.
So here dropping it as whole.
v2:
- Also remove memory frequency calculation for gen9 LP platforms
Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9cc ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
(cherry picked from commit 83f52364b15265aec47d07e02b0fbf4093ab8554)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In the counter subsystem, we are already using sysfs_emit(), but there
were a few places where we were still using sprintf() in *_show()
functions. For consistency and added protections, use sysfs_emit()
everywhere.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20211017190106.3472645-1-david@lechnology.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When endpoint_alloc() return failed in xillyusb_setup_base_eps(),
'xdev->msg_ep' will be freed but not set to NULL. That lets program
enter fail handling to cleanup_dev() in xillyusb_probe(). Check for
'xdev->msg_ep' is invalid in cleanup_dev() because 'xdev->msg_ep' did
not set to NULL when was freed. So the UAF problem for 'xdev->msg_ep'
is triggered.
==================================================================
BUG: KASAN: use-after-free in fifo_mem_release+0x1f4/0x210
CPU: 0 PID: 166 Comm: kworker/0:2 Not tainted 5.15.0-rc5+ #19
Call Trace:
dump_stack_lvl+0xe2/0x152
print_address_description.constprop.0+0x21/0x140
? fifo_mem_release+0x1f4/0x210
kasan_report.cold+0x7f/0x11b
? xillyusb_probe+0x530/0x700
? fifo_mem_release+0x1f4/0x210
fifo_mem_release+0x1f4/0x210
? __sanitizer_cov_trace_pc+0x1d/0x50
endpoint_dealloc+0x35/0x2b0
cleanup_dev+0x90/0x120
xillyusb_probe+0x59a/0x700
...
Freed by task 166:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x109/0x140
kfree+0x117/0x4c0
xillyusb_probe+0x606/0x700
Set 'xdev->msg_ep' to NULL after being freed in xillyusb_setup_base_eps()
to fix the UAF problem.
Fixes: a53d1202aef1 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)")
Cc: stable <stable@vger.kernel.org>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20211016052047.1611983-1-william.xuanziyang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When freeing txn buffers, binder_transaction_buffer_release()
attempts to detect whether the current context is the target by
comparing current->group_leader to proc->tsk. This is an unreliable
test. Instead explicitly pass an 'is_failure' boolean.
Detecting the sender was being used as a way to tell if the
transaction failed to be sent. When cleaning up after
failing to send a transaction, there is no need to close
the fds associated with a BINDER_TYPE_FDA object. Now
'is_failure' can be used to accurately detect this case.
Fixes: 44d8047f1d87 ("binder: use standard functions to allocate fds")
Cc: stable <stable@vger.kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Oded writes:
This tag contains habanalabs driver changes for v5.16:
- Add a new uAPI (under the memory ioctl) to request from the driver
to export a DMA-BUF object that represents a memory region on
the device's DRAM. This is needed to enable peer-to-peer over PCIe
between habana device and an RDMA adapter (e.g. mlnx5 or efa
rdma adapter).
- Add debugfs node to dynamically configure CS timeout. Up until now,
it was only configurable through kernel module parameter.
- Fetch more comprehensive power information from the firmware.
- Always take timestamp when waiting for user interrupt, as the user
needs that information to optimize the graph runtime compilation.
- Modify user interrupt to look on 64-bit user value as fence, instead
of 32-bit.
- Bypass reset in case of repeated h/w error event after device reset.
This is to prevent endless loop of resets to the device.
- Fix several bugs in multi CS completion code.
- Fix race condition in fd close/open.
- Update to latest firmware headers
- Add select CRC32 in kconfig
- Small fixes, cosmetics
* tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (25 commits)
habanalabs: refactor fence handling in hl_cs_poll_fences
habanalabs: context cleanup cosmetics
habanalabs: simplify wait for interrupt with timestamp flow
habanalabs: initialize hpriv fields before adding new node
habanalabs: Unify frequency set/get functionality
habanalabs: select CRC32
habanalabs: add support for dma-buf exporter
habanalabs: define uAPI to export FD for DMA-BUF
habanalabs: fix NULL pointer dereference
habanalabs: fix race condition in multi CS completion
habanalabs: use only u32
habanalabs: update firmware files
habanalabs: bypass reset for continuous h/w error event
habanalabs: take timestamp on wait for interrupt
habanalabs: prevent race between fd close/open
habanalabs: refactor reset log message
habanalabs: define soft-reset as inference op
habanalabs: fix debugfs device memory MMU VA translation
habanalabs: add support for a long interrupt target value
habanalabs: remove redundant cs validity checks
...
|
|
Remove the redundant first 'if' statement of two identical ones.
In rtw_cmd_thread() there are two identical 'if' statement, one
immediately after the other. They check whether or not the device is
removed or the driver is stopped and, if true, they break a 'while'
loop.
The only noteworthy context difference is that the second statement is
within a block labelled "_next". The code has a 'goto' to the "_next"
label so that the checking is performed each time the above directive
is encountered. Instead, the first 'if' is before the "_next" label.
One of the two must be removed and that it must be the one before the
label because "bSurpriseRemoved" as well as "bDriverStopped" may be
changed asynchronously by other code of the driver and so they should be
checked at each jump to "_next".
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-4-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_enqueue_cmd() uses a semaphore to notify rtw_cmd_thread() that it
has enqueued commands. rtw_cmd_thread() "down(s)" in interruptible mode
to wait to be notified.
Use completion variables because they are better suited for the purpose.
In rtw_cmd_thread(), wait in uninterruptible mode, even if the original
code uses down_interruptible(), because the interruption of
rtw_cmd_thread() is not allowed and unwanted.
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-3-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_cmd_thread() "up(s)" a semaphore twice, first to notify callers when
its execution is started and then to notify when it is about to end.
It makes the same semaphore go "up" twice in the same thread. This
construct makes Smatch to warn of duplicate "up(s)".
This thread uses interruptible semaphores where instead completions are
more suitable. For this purpose it calls an helper (_rtw_down_sema())
that returns values that are never checked. It may lead to bugs.
To address the above-mentioned issues, use two completions variables
instead of semaphores. Use the uninterruptible versions of
wake_for_completion*() because the interruptible / killable versions are
not necessary.
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace strncpy with strlcpy to fix the following gcc warning.
drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_wx_set_enc_ext':
drivers/staging/r8188eu/os_dep/ioctl_linux.c:1929:9: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
1929 | strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The destination buffer size is IEEE_CRYPT_ALG_NAME_LEN and the length
of the string to copy is always < IEEE_CRYPT_ALG_NAME_LEN. So strlcpy
will never truncate the string.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211018221231.7837-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Nodes for 'i2s' and 'nand' have no driver present inside the linux tree.
The normal approach for a dts file to be mainlined is start with those stuff
which is already mainlined and get rid of the other stuff. If needed it will
be properly added afterwards together with the suitable device driver. Hence,
remove both nodes from the device tree include file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211018170206.11959-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions
are unused, producing a warning:
drivers/iio/adc/imx8qxp-adc.c:433:12: error: 'imx8qxp_adc_runtime_resume' defined but not used [-Werror=unused-function]
433 | static int imx8qxp_adc_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iio/adc/imx8qxp-adc.c:419:12: error: 'imx8qxp_adc_runtime_suspend' defined but not used [-Werror=unused-function]
419 | static int imx8qxp_adc_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark them as __maybe_unused to shut up the compiler.
Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211013144338.2261316-1-arnd@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now ms5611_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The only effect of returning an error in an spi .remove() callback is
that the spi core issues a generic warning message. Instead emit a more
specific error message and return 0 to not report the same issue twice.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now hmc5843_common_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The only effect of returning an error in an spi .remove() callback is
that the spi core issues another warning message. Don't report the same
problem twice and return 0 unconditionally instead. Also degrade the log
level to warning, as nothing really bad is expected from a failure to
put the device in suspend mode.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now ad5686_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now ad5592r_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now ad5446_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Up to now ad5380_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
Dmitry Osipenko
David Lechner
Wang Kefeng
Vinícius Angiolucci Reis
Alex Henrie
Vadim Pasternak
Thomas Zimmermann
Jani Nikula
Daniel Lezcano
José Roberto de Souza
Ziyang Xuan
Todd Kjos
Greg Kroah-Hartman
Fabio M. De Francesco
Michael Straube
Sergio Paracuellos
Arnd Bergmann
Uwe Kleine-König